Upgradation of 10g to 11g - time zone update

Hi,
I am trying to upgrade my 10.2.0.3 test instance on RHEL 4.
As prerequisite, when I checked
SELECT version FROM v$timezone_file;
The version is 3.
What actions I need to take?
Do I need to apply any patch before upgrade?
From metalink note 815679.1
"For 10.2.0.2 and higher, there is no need to apply any patchest before upgrading to 11.2.0.1
Upgrade to 11.2.0.1. You can skip any DST related upgrade instructions.
The 11.2.0.1 RDBMS DST version after the upgrade to 11.2.0.1 will be the same DST version as used in 10.2.0.x."
That means no need to take any action?
Thanks,
Kavitha

Do the instance level parameters differ in these two nodes?
Also, may I suggest you take this to Database-General forum intead?

Similar Messages

Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version:       2.1.15
Revision:      5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home:   /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up:      supported
PSUs:          supported
Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base:    .
Patch source: SAP11203P_1312-20009978.zip
Link script:   ./link.mts<SID>ua.sh
Readmes:       <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name:     ora<SID>
Working dir:   /oracle/stage
System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free:     11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
   from           : /oracle/<SID>/11203/oraInst.loc
OPatch version    : 11.2.0.3.3
OUI version       : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
   Oracle Home dir. path does not exist in Central Inventory
   Oracle Home is a symbolic link
   Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APS

FOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Images after upgrade from 10g to 11g

We recently upgraded from 10g to 11g and all the images are broke in the dashboard.
Can anyone provide the steps needs to be done in order to fix the broken images?
Thanks.

Put image files at
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
If required
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Call them using fmap
Syntax: fmap:images/imagename.imageformat
for e.g: fmap:images/geograph.jpg
Pls mark correct/helpful if helps

After Upgrade OBI 10g to 11g:Odbc driver returned an error - SQLExecDirectW

Hi all,
for an OBI upgrade from 10g to 11g I used a RPD and Webcatalog based on a remote machine other than my local machine. Firstable I am making the tests on a Linux Virtual machine, which uses the Sample Lite version from Oracle.
I made the following steps:
1. I upgraded the RPD and Webcatalog. It worked without any errors.
2. I set the static variable BI_EE_HOME via Administration Tool to the path in the Linux machine.
--> Here I am not sure if the set path is correct. It begins with: \bi\ ...\instances\...\coreapplication_obis1 (... : I can't mention here the whole path name).
--> When the OBI Server is installed in Windows, the mentioned static variable points to something like 'C:\<install folder>\...\coreapplication_obis1'
--> Question: is the begin of my set path correct?. I set that pointing to the Linux OBI Server, because the OBI Server is installed on Linux.
Problem:
After login as the user in RPD: Administrator/<Password for my upgraded RPD> I can see the links in the Catalog and the Dashboards links. But I can not see any values, any Reports when going through the links.
For example when trying to see a Dashboard with date 12.02.2011it happens:
Odbc driver returned an error (SQLExecDirectW).
Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] general error.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43119] Query Failed:
[nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified
at OCI call OCIServerAttach.
[nQSError: 17014] Could not connect to Oracle database. (HY000)
SQL Issued: SELECT "Dimension_-_My Dimension"."MyDimension" saw_0 FROM "Accounting (ACC)" WHERE "Dimension_-_My Dimension"."MyDimension" LIKE 'J%' ORDER BY saw_0
I think its not retrieving the data from the remote database, because I don't have the data of the remote database in my local. I think the OBI Server still is pointing to the local virtual machine Oracle database.
Can anybody tell me what happens here and how can I solve this problem?.
I would appreciate any help....

Hi gerardnico,
I've tried many things and did as in your articles, but I don't have success with that.
These are the things I did:
1. I searched for the file tnsnames.ora in my Linux virtual machine. I could find it in many paths:
/.../Oracle_BI1/network/admin/samples/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/hs/admin/tnsnames.ora.sample
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/samples/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/temp/tnsnames.ora
/.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
in the last path I found the listener.ora as well.
2. I took the tnsnames.ora from the last path, because the ORACLE_HOME points to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server
3. I edited the tnsnames.ora this way:
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host_of_the_remote_machine)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = database_name_of_the_remote_machine)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = database_SID_of_the_remote_machine)
(PRESENTATION = RO)
4. I made a backup of the tnsnames.ora in path /.../Oracle_BI1/network/admin/samples/tnsnames.ora
and copied the tnsnames.ora from /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin to the Oracle_BI1 path
5. I set the TNS_ADMIN to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
6. I restarted the BI Server
No success in what I did. The error is still there.
7. I've tried also: sqlplus database_user_remote_machine/database_password_remote_machine@database_SID_remote_machine
I didn't get the connection:
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jun 16 04:36:10 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: database_user_remote_machine
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
What am I doing wrong here?. I am still thinking that I need the import of the database.
Additional SID=Service-Name=Database-name in the remote machine.

I need help with java Time Zone Updater for Venezuela Time Zone

Hi,
I've run the latest Time Zone Updater (1.3.5) on JRE 1.4.2. It is supposed to support the time zone changes for Venezuela. The problem is that when I set my Windows time zone and run java.util.TimeZone.getDefault() it says that I am on GMT instead of GMT-04:30.
Am I doing something wrong?
Thanks in advance for your help.

I have found the solution for cases in which you cannot update your JRE to anything further than 1.5. You will have to create an extra entry in the Java tzmappings file as follows:
Venezuela Standard Time:90,90::America/Caracas:After doing this, you will have to create a new String Value in your Windows registry for the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Time Zones\Venezuela Standard Time Key as follows:
Name: MapID
Value: 90,90
Best regards.

UPgrade from 10g to 11g

Dear All,
I am using 10.2.0.1 database and planning to upgrade to 11.1.0.6 and while executing the utlu102i.sql I found the database is using the old timezone.
SQL> select * from v$timezone_file;
FILENAME VERSION
timezlrg.dat 2
The issue is there is no patch available for the timezone upgrade for the windows platform in metalink.
Questions?
1. How can I upgrade the Time zone version before upgrading the database to 11g, if there is no patch available.
2. It is mandatory to upgrade the timezone or 11g will automatically upgrade it.
3. If I will go for the database upgrade without updating the timezone, will update fail.
4. Do I have to upgrade the timezone to the current database (10.2.0.1) and then install the 11g binaries and start the upgrade or install the 11g binary first and apply the patch on 11g and then start the database upgrade.
Below is the some part of the output of utlu102i.sql
Miscellaneous Warnings
WARNING: --> Database is using an old timezone file version.
.... Patch the 10.2.0.1.0 database to timezone file version 4
.... BEFORE upgrading the database. Re-run utlu111i.sql after
.... patching the database to record the new timezone file version.
WARNING: --> Database contains stale optimizer statistics.
.... Refer to the 11g Upgrade Guide for instructions to update
.... statistics prior to upgrading the database.
.... Component Schemas with stale statistics:
.... SYS
.... OLAPSYS
.... SYSMAN
.... CTXSYS
.... XDB
WARNING: --> Database contains schemas with objects dependent on network
packages.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER SYSMAN has dependent objects.
WARNING: --> EM Database Control Repository exists in the database.
.... Direct downgrade of EM Database Control is not supported. Refer to the
.... 11g Upgrade Guide for instructions to save the EM data prior to upgrade.
Eagarly waiting for your response.
Thanks in advance.

1. How can I upgrade the Time zone version before upgrading the database to 11g, if there is no patch available.
See Metalink Document How To Apply The V4 DST Patches To Windows Clients or Servers [ID 417893.1], this should help you here.
2. It is mandatory to upgrade the timezone or 11g will automatically upgrade it.
You will need to update the Timezone to V4 prior to attempting an upgrade
3. If I will go for the database upgrade without updating the timezone, will update fail.
Yes that upgrade will not work without first updating the timezone for the 10.2.0.1 database you have
4. Do I have to upgrade the timezone to the current database (10.2.0.1) and then install the 11g binaries and start the upgrade or install the 11g binary first and apply the patch on 11g and then start the database upgrade.
The binary installations can be handled separately, however no upgrade operations can happen until the DST v4 is taken care of for the upgrade.
Edited by: mrmessin on Dec 31, 2009 1:41 AM

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

Check list for upgrading from 10g to 11g when there is a schema replication

Hi
We are looking to upgrade one of our production database from 10g to 11g
Currently this database has one schema that is replicated to 2 other databases using Oracle streams.
The replication is excluing DDLs and excluding several other application tables.
What should I do pre and post the upgrade ?
should we remove the stream configuration all together and rebuild it after the upgrade ?
I was hoping that we can first upgrade the two target databases to 11g and then the source database, without impacting our streams configuration at all
Is that possible ?
Is there any documentation on the subject ?
thanks in advance
Orna

Pl post the OS versions of the source and target servers, along with exact (4-digit) versions of "10g" and "11g". I do not have any experience with streams, but the 11gR2 Upgrade Doc suggests that you upgrade the downstream target databases first before upgrading the source - http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/upgrade.htm#CIAFJJFC
HTH
Srini

.Database upgrade from 10g to 11g in Oracle EBS 11i

Hi,
An urgent help is needed.I am upgrading Oracle Database from 10g to 11g.My EBS is version 11i.So after upgrading my database
from 10g to 11g as sa sanity check what are the parameters we need to take care of the EBS.My point is will there be any Application level changes if the database
is upgraded?Wiill the Workflow and what other things we had to do the sanity check if its working properly?Any Concurent Program level changes be affected?
Thanks and Regards
Edited by: 918308 on May 10, 2013 7:52 PM

918308 wrote:
Hi,
Thanks for the info provided but i dont have the metalink id.Kindly can you provide me the link for the subjected docs so that i can relate.Any application level testing to be done?Concurrent Programs,Schedule Manager,Workflow etc.?We cannot post the contents of MOS docs since this violates Oracle support agreement policy.
You need to go a regular sanity check (i.e. submit concurrent programs, check workflow functionality, ..etc) -- E-Business Suite Diagnostics 11i Test Catalog [ID 179661.1]
Thanks,
Hussein

ODI Procedures not working after upgrading from 10G to 11G

Hello Gurus,
We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
Any help will be appreciated.
Thanks

If you want someone to help you, please be elaborate in the exact errors you are getting.
A general statement would do nothing but guess work.
What is the error that you get while executing the procedure.
What are the exact issues that you get while executing packages ?

Upgrading Obiee 10g to 11g.

Hi Guru's,
I had upgraded one of the RPD/Catalog(which are in sync) from 10g to 11g with ua.bat utility. Upgrade successfully completed with out errors & warnings.
I logged on to the BI Answers and able to run/see the data in the existing reports.
Here the problem is i am not able to see the existing Dashboards of Shared folder. what might be the reason
Please help me in this.
Thanks in advance.

Hi,
You mean images that we use in dashboards...If so in 10g its at this location C:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\images
Check for the style folder you will have images in that folder.
You can find at this location...C:\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Regards,
Srikanth
Edited by: Srikanth Mandadi on Oct 28, 2010 2:13 AM

OIM 11g - Time zone Issue

Hi,
We have a OIM 11g instance running at a central location. (PST). Our implementation is for a Global Company having offices at multiple locations ( Say Germany, US , India and Japan ). So, the users should be provisioned / terminated only on the local time zones.
All the servers are present in "PST".
Any pointers are appreciated.
Regards
Vicky

Hi Atul,
Thanks for your response.
But how does running at three different timezones will help me.
Say, I have an user in Japan and an user in India. Both users termination date is tomorrow. (Received from PSFT, future dated termination).
So, when the job is run according to Japan's time zone, the user will be terminated and will be deprovisioned as expected.
Here comes the problem, because of the same date, the user in India who is supposed to be terminated on his last day ( day ending say 6 PM) will lose his access well before that.
Correct me if I am missing something.
Regards
Vicky
Edited by: vicky on Mar 8, 2011 2:47 AM

Report Navigation Issue after upgrading from 10g to 11g

Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer

Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer

Upgrading from 10g to 11g

Hi,
Is it possible upgrade OBIEE version 10g to version 11g and keep the database versjon 10.2.0.3?
Basically does the upgrade (or version of OBIEE) depend on the version of the database?
Thanks in advance!

Hi Sailesh,
OBIEE 11g installation needs that Fusion Middleware Database schemas (BI_PLATFORM and BI_MDS in this case) are already created on a supported database by RCU. The supported Oracle databases for holding the schemas are like
"Oracle 10.2.0.4+
Oracle 11.1.0.7+
Oracle 11.2.0.1+"
Reference: http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html.
Section -> Additional Oracle Fusion Middleware 11g Release 1 (11.1.1.x) and 11g Release 2 (11.1.2.x) Certifications ->
System Requirements and Supported Platforms for Oracle Business Intelligence Suite Enterprise Edition 11gR1
However, your datasource can still be 10.2.0.3 DB for the reports.
Hope this helps.
Thank you,
Dhar

Unable to proceed with upgrade utility while upgrading from 10g to 11g

We have installed Weblogic server,configured the domain also performed the schema creation using the RCU and Installaed OBIEE 11.1.1.6.
But while running the the upgrade assistance utility facing the following error:
UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
Indicating no Oracle instance is found.
Full log file details from upgrade utility log:
ua2013-04-12-17-17-11PM.log
========
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Plug in Name : BIEE
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Display Name : Oracle Business Intelligence Enterprise Edition
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Checking string translations
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] String translation check finished
[2013-04-12T17:21:01.466-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to examine components.
[2013-04-12T17:21:01.466-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to examine BIEE.
[2013-04-12T17:21:01.482-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] MBean connection made : service:jmx:t3://localhost:7001/jndi/weblogic.management.mbeanservers.domainruntime
[2013-04-12T17:21:01.482-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] RPD = D:\SampleSales\samplesales.rpd
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] upgrade exception occurred
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished examining BIEE with status: Failure.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished examining components.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to list upgradeable items.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Component name: Oracle Business Intelligence Enterprise Edition
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] No upgrade items found
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished listing upgradeable items.
[2013-04-12T17:22:14.546-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Upgrade was canceled by the user.
===================
Topology.xml file details:
============
<?xml version='1.0' encoding='UTF-8'?>
<topology xmlns='http://www.oracle.com/fmw-nonj2ee-topology'>
<ias-instance id="instance2" oracle-home="D:\OBIEE_Middlewarehome\Oracle_BI1" instancehome="
D:\OBIEE_Middlewarehome\instances\instance2" host="PEPWAP06411.corp.pep.pvt" port="9501">
<ias-component id="coreapplication_obijh1" type="OracleBIJavaHostComponent">
<em-properties>
<property name="EMTargetType" value="oracle_bi_java_host"/>
<property name="originalAllocatedPort" value="9810"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obisch1" type="OracleBISchedulerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9708"/>
<property name="originalAllocatedScriptRPCPort" value="9707"/>
<property name="EMTargetType" value="oracle_bi_scheduler"/>
<property name="originalAllocatedPort" value="9705"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obis1" type="OracleBIServerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9701"/>
<property name="EMTargetType" value="oracle_bi_server"/>
<property name="originalAllocatedPort" value="9703"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obips1" type="OracleBIPresentationServicesComponent">
<em-properties>
<property name="EMTargetType" value="oracle_bi_presentation_services"/>
<property name="originalAllocatedPort" value="9710"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obiccs1" type="OracleBIClusterControllerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9700"/>
<property name="EMTargetType" value="oracle_bi_cluster_controller"/>
<property name="originalAllocatedPort" value="9706"/>
</em-properties>
</ias-component>
</ias-instance>
</topology>
================
Please help.
Thank you.
Regards,
MAK
Edited by: 1000104 on Apr 15, 2013 7:42 AM

There's a dedicated Web logic forum (WebLogic Portal where you might get better assistance. As i can't move your thread, please close this one and post your issue again in the web logic forum.
Thanks,
Klaus

Upgradation of 10g to 11g - time zone update

Similar Messages

Maybe you are looking for