Upgradation of 11.0.3 (vis) to 11i any documentation

Dear Friends,
I want to upgrade vis 11.0.3 to 11i can you please let me know from where to start.
Regards,
Rajanish Joshi
null

Start at Upgrade Documentation. One way to try - (High Level)
1. Install RapidInstall 11.5.3 release of Oracle Apps without database
2. Take the database copy and create database
3. Apply Platform specific Megapatch 11.5.3 against it.
[This is solution is my personal solution and is not recommended in any book. Do not quote me on that strategy.]
<BLOCKQUOTE>quote:<HR>Originally posted by Rajanish Joshi ([email protected]):
Dear Friends,
I want to upgrade vis 11.0.3 to 11i can you please let me know from where to start.
Regards,
Rajanish Joshi<HR></BLOCKQUOTE>
null

Similar Messages

Upgrade oracle 9i to 10g in apps 11i

I am trying to run dbua from 10g oracle_home. However it gives the following db to upgrade->FATST:/u02/fatstdb/10g:N (this is non-existent oracle home)
But actually databse that i have to update is -->
FATST:/u02/fatstdb/9.2.0:N
We have the following entries in oratab file-->
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u02/fatstdb/9.2.0:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
FATST:/u02/fatstdb/10g:N
FATST:/u02/fatstdb/9.2.0:N
Actually sometime back we tried to upgrade to 10g which failed and then i did clone it from prod. I installed 10g software,companion products,10.20.4 patch set on new oracle_home-/u05/fatstdb/10g
I believe rest of inventory is clean as i always create a empty oraInventory directory before cloning.
DBUA also gives message, that if you do not see database that you want, make sure that the entry with database name exists in file /var/opt/oracle/oratab file.
I think i will have to edit the file oratab manually to remove the entry "FATST:/u02/fatstdb/10g:N" as the desired entry is already there. Is this okay?
Also i manually copied init<sid>.ora from 9ihome/dbs to 10ghome/dbs modifying the required parameters. i want to know is this manual step required?
Thanks

I did that and restarted the DBUA. It went on smoothly but during the Post-install steps, the putty connection was lost and hence GUI also got lost. when i see the PostUpgrade.log
It states this-->
DOC> 1. Query returning the number of invalid objects remaining. This
DOC> number should decrease with time.
DOC> SELECT COUNT(*) FROM obj$ WHERE status IN (4, 5, 6);
DOC>
DOC> 2. Query returning the number of objects compiled so far. This number
DOC> should increase with time.
DOC> SELECT COUNT(*) FROM UTL_RECOMP_COMPILED;
DOC>
DOC> This script automatically chooses serial or parallel recompilation
DOC> based on the number of CPUs available (parameter cpu_count) multiplied
DOC> by the number of threads per CPU (parameter parallel_threads_per_cpu).
DOC> On RAC, this number is added across all RAC nodes.
DOC>
DOC> UTL_RECOMP uses DBMS_SCHEDULER to create jobs for parallel
DOC> recompilation. Jobs are created without instance affinity so that they
DOC> can migrate across RAC nodes. Use the following queries to verify
DOC> whether UTL_RECOMP jobs are being created and run correctly:
DOC>
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
When i checked the number of invalids they have increased to 173 ..originally they were 73. That is fine , i can recompile them manually.
SELECT COMP_NAME, VERSION, STATUS FROM
DBA_REGISTRY
COMP_NAME VERSION STATUS
Oracle Database Cata 10.2.0.4.0 VALID
log Views
Oracle Database Pack 10.2.0.4.0 VALID
ages and Types
Oracle Real Applicat 10.2.0.4.0 INVALID
ion Clusters
JServer JAVA Virtual 10.2.0.4.0 VALID
Machine
COMP_NAME VERSION STATUS
Oracle XDK 10.2.0.4.0 VALID
Oracle Database Java 10.2.0.4.0 VALID
Packages
Oracle interMedia 10.2.0.4.0 VALID
Spatial 10.2.0.4.0 VALID
Oracle Text 10.2.0.4.0 VALID
OLAP Analytic Worksp 10.2.0.4.0 VALID
ace
COMP_NAME VERSION STATUS
Oracle OLAP API 10.2.0.4.0 VALID
OLAP Catalog 10.2.0.4.0 VALID
Oracle Data Mining 10.2.0.4.0 VALID
Oracle XML Database 10.2.0.4.0 VALID
Oracle Enterprise Ma 10.2.0.4.0 VALID
nager
15 rows selected.
I also managed to shutdown and startup the 10g db successfully.
I checked the database upgrade step and in that it is mentioned that utlrp.sql is the last step in manual database upgrade step .I want to know is there any other post upgrade step that needs to be done or can i just continue the steps from Doc ID: 362203.1 Oracle Applications Release 11i with Oracle 10g Release 2 (10.2.0)

Upgrading Oracle Apps from 10.6 to 11i

Hi all,
Could you please help me to find out the docmentation for upgrading Oracle Apps from 10.6 to 11i.
Thanks
Leo.

Did you ever get a response?
Please email me at [email protected]
<BLOCKQUOTE>quote:<HR>Originally posted by Leorajan:
Hi all,
Could you please help me to find out the docmentation for upgrading Oracle Apps from 10.6 to 11i.
Thanks
Leo.<HR></BLOCKQUOTE>
null

I have 200 forms designed in Designer 7.1. If I upgrade my designer to ES4, will I face any potential issues? Any one has done it before? what challenges we might face?

I have 100 forms designed in Designer 7.1. If I upgrade my designer to ES4, will I face any potential issues? Any one has done it before? what challenges we might face?

Hi,
A couple of problems we've had is Designer setting strict scoping on by default (it you added dynamic properties to JavaScript form objects as the garbage collection changed) and the way we used 'proto' elements (or form objects that show up under "reference nodes" in the hierarchy)
These blogs might help
http://forms.stefcameron.com/2008/10/28/target-version-tutorial/
http://blogs.adobe.com/formfeed/2009/06/enforcing_strict_javascript.html
Regards
Bruce

I have been working on a wedding slideshow for days and have over 3,000 pictures in albums on iPhoto. It suddenly will not open without upgrading to Aperture and I can't find any of my photos!!!!

I have been working on a wedding slideshow for days and have over 3,000 pictures in albums on iPhoto. It suddenly will not open without upgrading to Aperture and I can't find any of my photos!!!! I need these photos, to complete the video, not to mention I don't want to lose them. I have had trouble ever since upgrading to Maverick.

Try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.

Will i lose all my iphone content now that i have upgraded my hard drive and no longer have any of the files in iTunes

i no longer have any of my songs, ringtones, apps, photos etc, on my macbook anymore due to a SSD upgrade. i did not want to back up any files from the old hard drive as some were corrupt and i did not want that to transfer over to my new hard drive so i started from fresh. what i would like to know is, if i now sync my iphone with itunes, am i going to lose all the content on my iphone because there is nothing to sync it with or, will it transfer all the files onto my computer and i will have them again? or is there a way to do that before i sync and lose everything i have gained on the phone?

ddurval73 wrote:
I'm afraid I'm gonna lose all my music on my Iphone when I unlock it. I have over 4,000 songs in it and they are not backed up on my itunes library (I know, big mistake. I was trying to save space on my hard drive.). Please tell me I won't lose my songs or if I do how do I transfer them back to the Itunes? Is there a good software that can do that hassle free?
Thanks
It's called "iTunes". Connect the phone, but do not sync, when it appears in iTunes choose "transfer purchases..." from the iTunes File menu.

After upgrading I can no longer sign in to any web sites, access any menu options on any web site or navigate through ANY web site. What is going on?

After upgrading, I can no longer log in to any websites, and all the option on the upper part of ALL web sites are dead. I cannot click on any menus. How do I get rid of this latest upgrade and return to a WORKING version?

Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve the problem:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Using Audition 2.0 on Windows XP platform. Now have Windows 8.1 on new computer and need to upgrade and load latest version of Audition. Any suggestions? Thanks very much.....R

Using Audition 2.0 on Windows XP platform. Now have Windows 8.1 on new computer and need to upgrade and load latest version of Audition. Any suggestions? Many thanks, R.

VC6. is rather old, but you can try to convert the VC6 project using the upgrade wizard of VC2012. Depending on the content of the project your code will work more or less without problems, at least it will compile without errors.
You could also go the 2nd way and create in VC2012 a project type using the wizard that is very similar to your current VC6 projcet (MDI, SDI, Dialog Based, ...). Than you replace the files generated by the wizard with the content of your project. Sometimes
this way is more successful.
But at all the automated converting success depends on the code of your VC6 project. I had both, conversions without big problems and also conversions that need a lot changes to run on a current VC version.
Best regards
Bordon
Note: Posted code pieces may not have a good programming style and may not perfect. It is also possible that they do not work in all situations. Code pieces are only indended to explain something particualar.

Hello, can't get my mac to upgrade to latest versions of quicktime, itunes or any other os

Hello, can't get my mac to upgrade to latest versions of quicktime, itunes or any other os

The latest OS that you can run is 10.5.8. That is as far as Power Mac machines can go.
The latest Quicktime, iTunes, etc., must be both OS X 10.5.8 AND Power Mac (PPC) compatible.
This is the last OS update for your machine:
http://support.apple.com/kb/DL866
iTunes 10.6.3 requires OS X 10.5.8 and is the last update for iTunes on a PPC machine:
https://support.apple.com/kb/DL1575
Quicktime:
http://support.apple.com/kb/DL761

I am a student trying to purchase creative card with a maestro card but won't allow anything other than master card or visa, is there any way around this?

I am a student trying to purchase creative cloud with a maestro card but won't allow anything other than master card or visa, is there any way around this?

No, not that I know about... but you might check the credit card page to see if there is an option
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html

HT5037 I have installed the iPhoto Library upgrade, which confirms it was successfully installed, however when ever I try to open iPhoto 11, it refers me back to the bloody library upgrade again, so I can't use iPhoto any more.

I have installed the iPhoto Library upgrade, which confirms it was successfully installed, however when ever I try to open iPhoto 11, it refers me back to the bloody library upgrade again, so I can't use iPhoto any more.

Thanks, it worked first time that I double clicked as you suggested.
Why do Apple make it so hard to upgrade some programs? They could make the follow through instructions a lot clearer.
Now I have it open- it works and..................... it does look pretty neat.

How to upgrade mac os x 10.5.3 to any version?

How to upgrade mac os x 10.5.3 to any version???

If your Mac is running Leopard (10.5.x) then in order to upgrade further, you need to call Apple and purchase an upgrade to Snow Leopard (10.6.x). I have not verified this myself, but I have been told that you can only purchase this by calling Apple, and it will cost about $20 USD.
Once you have Snow Leopard, you will need to verify if you really want to upgrade further. By going to any newer OS, you will lose the ability to run any older PowerPC based software, as the newer releases of Mac OS do not include ROSETTA, which is needed to continue to run those applications. Also, if your hardware has Leopard, it may not support any of the newer Mac OS releases, so you would want to verify that as well.
After you have installed Snow Leopard, and then updated it to the latest (10.6.8) you can use the Mac App Store to purchase newer OS releases. For right now, you can Buy Mountain Lion directly in the store. If your hardware can't support Mountain Lion, but you still want ot upgrade to Lion, you will need to place another call to Apple to purchase an upgrade code to Lion. With that upgrade code, you can redeem it in the App Store to download the Lion installer.

HT1414 My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

Lilasil wrote:
The message displayed suggests to return the iPhone to factory settings (which I cannot do).
Why not?

I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the typ

I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.

Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available.

Since iOS 5.0 upgrade can't add details into calender. Any ideas

Since iOS 5.0 upgrade, can't add details into calender. Any ideas

Update! I took some general advice on the forum and rebooted my iPhone a few times. I also asked the phone to "forget this device" and attempted to reconnect several times. It would load my contacts and then proceed to disconnect from the phone and I would also see a message on the Bluetooth page that the BlueAnt ST3 was not supported.
I gave up.
I left the two devices plugged into my computer for power overnight, laying side by side on the table.
They found each other. The next day they connected and have been communicating ever since.
Perhaps until the next IOS upgrade? But a happy ending in the interim

Upgradation of 11.0.3 (vis) to 11i any documentation

Similar Messages

Maybe you are looking for