Upgradation of OS(Windows 2000to 2008) of SAP R/3 4.7 C

Hi All,
We have SAP R/3 4.7C version in our landscape & OS is windows 2000.Since now microsoft 200 server support is going to end so our sever team pans to upgrade it to 2008 server.
But i am not able to check the compatiblity of sap version with windows 208 server as standard support of this SAP version has already end.
Can anybody help in this?
Thanks in advance.
Regards
Joy Garg
09911321800

> We are using R/3 4.7 Enterprise 110, kernel 640,basis release 620, Oracle version is 10.2.0.4,so you means it can't be migrated to Windows 2008.
Yes, that's right.
> Can it be migrated to windows 2003 as in the installation guide of R/3 4.7 enterprise its mentioned that only supported windows operating system for this version is windows 2000.
Yes.
> So do you mean that we need to upgrade SAP version & after that we need to do OS migration?
I'd also recommend upgrading to a higher version since the support for 4.71 ran out in 2009 already.
Markus

Similar Messages

License upgradation problem from windows server 2008 r2 STD to ENT edition

Hello All,
facing problem to upgrade License windows server 2008 r2 STD to ENT edition.
Change the key also but not work. please suggest
Error :
C:\Users\administrator.rr>Dism /online /Set-Edition:ServerEnterprise /ProductKey:hfget-43erf-ed432-tfed4-de321
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7601.18489
Error: 1605
The specified product key is not valid for the target edition.
Run this command again with a product key specific to the target edition.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
015-02-15 19:36:46, Info                  DISM   PID=2464 Scratch directory set to 'C:\Users\ADMINI~1\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2015-02-15 19:36:46, Info                  DISM   PID=2464 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2015-02-15 19:36:46, Info                  DISM   DISM Manager: PID=2464 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-15 19:36:46, Info                  DISM   DISM Provider Store: PID=2464 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2015-02-15 19:36:46, Info                  DISM   DISM.EXE:

Hi Parvez Islam,
The active issue we can call the telephone to active center, they will give the detail and official support answer, you can get communication way from following web site:
Existing Customers
Product Activation and Key Information
http://www.microsoft.com/licensing/activation/existing-customers/product-activation.aspx
Base on my experience your issue most time occur when you have the following known issue environment, please refer the following KB to fix it.
Features missing or incorrect memory reported after using dism /set-edition to upgrade computer
http://support.microsoft.com/kb/2652825
More information:
How to upgrade Windows Server 2008 R2 Standard to Enterprise
http://blogs.technet.com/b/austria/archive/2011/04/12/how-to-upgrade-windows-server-2008-r2-standard-to-enterprise.aspx
I’m glad to be of help to you!

Upgrading windows server 2003 domain controller to windows server 2008

Hello friedns :
We have a company with about 2000 users , and two windows server 2003 domain controllers , one of them acts as a primary domain controller , and the other acts as secondary domain controller , all the FSMO s are on the primary DC ,we have decided to upgrade all of our servers from windows server 2003 to windows server 2008 , the first step is to upgrade the domain controllers to windows server 2008 , our domain controllers are so sensitive and has to be active 24 hours a day , i have stress upgrading it to windows server 2008 , what is the best solution to upgrade it with no risk ?
( i have an opinion but i am not sure and i dont have any guide about it , i want to install a windows server 2008 and promote it as an additional domain controller to the windows server 2003 DC and the transfer all the FSMOs to it , and then promote the first domain controller !!! is that possible ? if yes , is there any guide about it? )
If there is a guide available for it please let me know . (Specially if there is a tip & trick)
thank you guys.
Network is my LOVE

Hi,
This TechNet online article might be helpful for you.
How to Upgrade Domain Controllers to Windows Server 2008 or Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ee522994(WS.10).aspx
For your convenience, I have list some general steps for your reference.
Since the following operation have potential damage to Active Directory database, it is highly suggested that you'd better perform a full backup of Active Directory (System State) firstly. Also it is better to test the following procedure in a similar lab environment first.
General Steps:
=============
1. Verify the new server's TCP/IP configuration has been pointed to the current DNS server.
2. Make the new server become a member server of the current Windows Server 2003 domain first.
3. Upgrade the Windows Server 2003 forest schema to Windows Server 2008 schema with the "adprep /forestprep" command on old server.
Please run the "adprep.exe /forestprep" command from the Windows Server 2008 installation disk on the schema master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP\adprep.exe /forestprep
4. Upgrade the Windows 2003 domain schema with the "adprep /domainprep" command on old server.
Please run the "adprep.exe /domainprep" command from the Windows Server 2008 installation disk on the infrastructure master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP \adprep.exe /domainprep
5. Insert Windows Server 2008 Installation Disc in the new server.
6. Run "dcpromo" on new server to promote it as an additional domain controller in existing Windows 2003 domain, afterwards you may verify the installation of Active Directory.
Please refer to:
How to Verify an Active Directory Installation in Windows Server 2003
http://support.microsoft.com/kb/816106
7. Verify the new server's TCP/IP configuration has been pointed to current DNS server.
8. Enable Global Catalog on new server and manually Check Replication Topology and afterwards manually trigger replication (Replicate Now) to synchronize Active Directory database between 2 replicas.
Please note: It will some time to replicate GC between DC, please wait some time with patience.
9. Disable Global Catalog on the old DC.
10. Transfer all the FSMO roles from the old DC to the new DC.
Please refer to:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
11. Verify that the old DNS Server Zone type is Active Directory-Integrated. If not, please refer to:
How To: Convert DNS Primary Server to Active Directory Integrated
http://support.microsoft.com/kb/816101
Note: Active Directory Integrated-Zone is available only if DNS server is a domain controller.
12. Install DNS component on new server and configure it as a new DNS Server (Active Directory Integrated-Zone is preferred). All the DNS configuration should be replicated to the new DNS server with Active Directory Replication.
13. Make all the clients change TCP/IP configuration to point to new server as DNS.
14. You may configure TCP/IP on all the clients, or adjust DHCP scope settings to make them use the new DNS server.
Please note: It is a good practice to make the old DC offline for several days and check whether everything works normally with the new server online. If so, you may let the old DC online and run DCPROMO to demote it.
Hope it helps.
Regards,
Wilson Jia
This posting is provided "AS IS" with no warranties, and confers no rights.

Install windows server 2008 64bit on a poweredge sc430 using usb flash drive

Good day Sir!
I Have 2 poweredge sc430 server with windows server 2003 64bit OS... I want to upgrade it to windows server 2008 standard edition R2 64bit.. I first disable the internal cdrom from bios and installed win2k8 64bit on 1 sc430 using external dvdrom. But when i used a usb flash drive to install win2k8 to another sc430, the server and keyboard hangs. ive already configured the boot sequence(usb drive as 1st priority). ive tried my usb flash to a non dell pc to make sure if my usb boots well and it worked... i think that there must be something i missed in configuring the bios of sc430
Thanks in advance!

donpham
Is it possible that I could have a copy of WS 2008 64-bit from you?
Thanks!
That's not how it works.

Unable to install SAP B1 on Windows server 2008 R2

Hi
I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
Environment is set as following :
1. SQL SERVER 2008 Installed on Server A
2. SAP B1 to be installed on Server B
3 Both servers are in domain
4.Firewall is off
5. ODBC Connection is tested Successfully
6 Port is also seem to be ok.
But after Installing server tool, when trying to install the Server , in server type nothing is displayed.
I also checked the connecting SQL server from the instance .
Please help is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
Thanks & Regards
RP

Windows server 2008 R2 is not a supported OS for a lower 2007 version. You need to install a higher version.
Hi Gordon ,
It means I have to install SAP 2007 B PL10 afterwards upgrade it to the latest patch level .
But searching in the forms , i have seen some bopdy installed the SAP 2007 B PL15 on Windows server 2008 R2.
Thanks in advance
Regards
RP

ERROR Installing SAP NetWeaver PI 7.1 EHP 1 on Windows Server 2008 R2 x64

Hi!
I'm trying to install SAP NWPI 7.1 on a Windows Server 2008 R2 Standard, but in the step "Create Java User" stop the process when this creating the SAPJSF user, here's my system specifications:
OS: Windows Server 2008 R2 x64 Standard
RAM: 2 GB
Free Space: 100 GB
Virtual Memory: 16384 MB
Environment Variables:
CPIC_MAX_CONV = 200
JAVA_HOME = JDK 1.5 64 Bits
On running phase: Create Java Users, the installation stops when try to create the SAPJSF user, here's the output log:
ERROR 2010-06-16 12:18:28.968 [sixxcstepexecute.cpp:984]
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
INFO 2010-06-16 12:17:57.968
Output of C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/ADA/STD/AS/UserCheck.log.
WARNING 2010-06-16 12:18:28.593
Execution of the command "C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message"; finished with return code 8. Output:
INFO 2010-06-16 12:18:28.609
Removed file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ADA\STD\AS\dev_UserCheck.
ERROR 2010-06-16 12:18:28.640
CJS-30197 . DIAGNOSIS: For more details see output of log file:
ERROR 2010-06-16 12:18:28.968
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
WARNING 2010-06-16 12:18:29.125
Could not get property IDs of the JavaScript object.
ERROR 2010-06-16 12:18:29.125
FJS-00010 Could not get value for property
Best Regards,
David

Hi All,
As per the latest available sapinst and the kernel DVS's the system does not come up in the Java stack/Dual stack. Fails at the stage Starting the Java stack/SAPJSF creation stage. This is due to the kernel issue as the latest kernel is not bundled as a part of the DVD.
You are opt for 2 options
1. Stop the installation and the Bring down the system via MMC/cmd. backup the kernel and upgrade the Kernel with the latest Kernel available in the market place and then start the SAPINST. This would go ahead fine and the system would come up.
This is valid for the Dual stack and Java only system. In As ABAP the system get installed but the system would give dumps as soon as we log in so the Kernel upgrade needs to be done to proceed with the rest of the post steps.
2. Follow the snote: Note 1480785 - Creating a Modified Windows Kernel DVD for not getting bothered with these errors while installations.
Hope this helps -- Further more SAP would be coming out with the new DVD's/Support for Windows 2008 R2 pretty soon.
Thanks,
Lijin Xavier

ECC 6/MS Windows Server 2008/SQL Server 2008 Upgrade

I am working with a client who wishes to do an ECC upgrade from ECC 5 to ECC 6. They also wish to upgrade the Op System from Windows Server 2003 to Windows Server 2008; and the database from MS SQL 2005 to MS SQL 2008.
My proposal is to Upgrade ECC, then the Op System then the DB in each environment before moving forward. We would do the first upgrade in Sandbox to determine timing, issues, etc. We would create a production support path to be used during the project, then start the upgrades Dev-QA-Prod.
The client has said that this is a risky approach and that SAP recommends a 2 step process, that is, upgrade ECC 6 thru all environments and then go back and do the Op Sys and Db upgrades afterward.
In my mind my approach is less risky as we will ensure each environment is clean and functioning smoothly before moving forward; there is less intrusion to the end user; testing is only accomplished once in each environment. The actual production build would be split over 2 weekends, app upgrade first then op sys and db.
The assistance I need to understand isu2026.does SAP have a recommendation in this case? I have not seen anything that says not to do the single step process I am recommending.
Thanks for any support you can provide.

Hi,
If SAP is recomending that is because They recomends not to "mix" upgrades with any other process like Heterogeneous system copies, DB upgrades, etc. In fact this is in the upgrade guides. But I think like some others here has already writen, that you could upgrade and change OS and SQL server in two different steps but in the same process so the downtime will be longer but it will be only one.
Of course this will depend on how long your upgrade downtime will take because usually the upgrade could take 7 hours more or less, post upgrade tasks, export task (R3load), change OS and SQL server if not using different HW, import task and post copy tasks.
What is the maximun downtime your client is ready to tolerate? If you have a whole weekend beginning from friday afternoon and ending Monday morning probably you will have enough time to do all in one weekend but again, it will depend on your tests. Why don´t you talk to your client and tell them if they have new HW already for this project to do a Prod copy in one of those servers as part of the whole project and take the times you will need. Then with that in perspective you could decide what approach is better.
With some upgrades done under my belt to different clients I don´t assure anything until I do a test upgrade including all changes (os or DB) necesary to finish time schedules, then with that in mind then we can redefine the way we will use and we make that clear before the beginning of the project. I always tell them that it is better to do a test like this if they don´t have much available downtime, the project will take longer but for sure the Production downtime will be shorter.

MMC hangs on Windows 2008 and SAP MMC console not coming up

Hi All,
We are running SAP CRM 7. After upgrading Windows 2003 to Windows 2008 R2, SAP is coming up on our J2ee engine. We are able to login to the SAP J2ee application, but SAP MMC hangs. After the reboot, SAP MMC does come up but it hangs while starting the SAP Server Processes. We have to close the MMC from CTRL-ALT-DEL (end process). After that SAP MMC does not come up. Although, we can number number of MMC.EXE running in task manager,but
the SAP MMC window is not displayed.
We have gone through OSS note Note 1326097 - SAP MMC Snap-In crash for certain operations and installed the new version of MMC. But still the error exists. Also, we have installed the VCREDLIST patch and have installed all the DLLs mentioned in OSS SS Note 684106 - Microsoft runtime DLLs.
Also, the event viewer shows the following message
Log Name: Application
Source: Application Hang
Date: 9/9/2011 8:32:30 AM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Computer: sap-xp-q01.com
Description:
The program mmc.exe version 6.1.7600.16385 stopped interacting with
Windows and was closed. To see if more information about the problem is
available, check the problem history in the Action Center control panel. Process ID: fcc
Start Time: 01cc6f03c402c248
Termination Time: 6
Application Path: C:\Windows\system32\mmc.exe
Report Id: e74f009f-daf8-11e0-afd2-000c29701b8a
Also, we have upgraded the SAP Kernel to the latest patch level and installed MMC latest patch.
Please suggest.
Thanks,
Antarpreet

Hello,
Try to re-create (re-register) the SAP Services (SAP instance services) in services.msc list. Then try to put SAP MMC up.
Or, after recreation of sap instance services, try to reconfigure the sap mmc as well -
http://help.sap.com/saphelp_nwpi71/helpdata/en/49/0eb43799b4740ee10000000a421937/content.htm
Thanks

OS upgrade from windows 2000 to Windows 2003/ 2008

Hi friends,
We are planning to do an OS upgrade of our current production system from windows 2000 to Windows 2003/ 2008.
Can you please refer me to any existing document /Forum link which has a detailed strategy outlaying the activites to be performed for this.
Regards,
Rohit

Hello,
Just upgrading the OS to 2003 should be OK as 640 - 700 kernel is supported on Windows 2003
www.service.sap.com/pam
For 2008 minimum level is 700 SR3 best to do a system copy
SAP on Microsoft Windows:
SAP on Microsoft Windows
regards,
John Feely

Upgrade ADS to Windows 2008 R2

Dear expert
We have active directory server (ADS) that run in windows 2003 and connect to our portal (netweaver 2004s). our company have plan to upgrade the ADS to windows 2008 R2, the question is, any issue regarding this plan? especially about connection between portal and ADS 2008 R2 ?
Thxs.

Hi!!
As you can read in [SAP note 1383873|https://service.sap.com/sap/support/notes/1383873], Windows Server 2008 R2 is not still supported by SAP. As the note specifies, the PAM will reflect that operating system as soon as it is supported (for Oracle, check also [note 1303262|https://service.sap.com/sap/support/notes/1303262]).
I tried to provide you a more tight estimation, and after conversations with the developers, I can advance you that it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released after 710 (very rough stimation; if there are problems the release could be even postponed!).
I am aware that your question focuses strictly on the Active Directory, but anyway it was not still checked by SAP developers. Take into account that there are several changes in the authentication methods used and even some cryptographic protocols could not be available. This could make some of your applications to fail.
In particular, I am aware of a case that, after upgrading the Domain Controllers to Windows Server 2008 R2, the SSO (SPnego) stopped working due to the fact that the DES encryption protocol was no longer available, and so Kerberos was not supported. In fact, if you check [note 994791|https://service.sap.com/sap/support/notes/994791], you will discover that the current SPNego Wizard utilized by SAP was tested using the following Windows Kerberos Environments:
    o Microsoft Windows Server 2000 Active Directory
    o Microsoft Windows Server 2003 Active Directory
    o Microsoft Windows Server 2008 Active Directory
But not Windows Server 2008 R2 Active Directory, that is a completely different AD (as Windows Server 2008 R2 is an operating system that is completely different from Windows Server 2008, even though the name seems to be confusingly indicating otherwise).
As a summary, depending on your configuration, your applications could even stop working if you upgrade your Active Directory before it is released.
Cheers!!

Upgrade to Windows Server 2008 R2

Our SAP systems are currently running Windows Server 2003 R2 with SQL server 2005. Microsoft currently has a newer version of Windows Server 2008 R2 and SQL 2008 in release. Seeing that Windows has a newer OS out for release, would it be recommended that we upgrade our servers to the newer OS and SQL versions?

This is a matter of installing the new software and "upgrading" the database, easy. You can check the upgrade guides at
http://service.sap.com/instguides
--> Database upgrades
Make sure you have the the necessary support package in the system to run SQL Server 2008. I would even go for SQL 2008 R2 which has a better compression, so you'll save space on your harddisk and fewer reads --> faster.
Check
Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2)
Note 1488135 - Database compression for SQL Server
Markus

Running R/3 4.7 on a Windows Server 2008 System during an upgrade

Dear all,
I am plannung an upgrade project from R/3 4.7x200 to ERP6.0. The system is running on MaxDB. It's a single stack ABAP System.
Currently the system is running on a 32 bit Windows Server 2003. During the project we want to go to a new x86 64bit hardware with OS Windows Server 2008.
In order to use the speed of the new hardware also during the upgrade I want to move the systems to the new HW before starting the upgrade.
The problem is that runnning R/3 4.7 on Windows Server 2008 is not supported by SAP. On the other hand running the target release ERP6.0 on Windows Server 2008 is officially supported by SAP. This information comes from the PAM.
From the past I know that SAP allowed to run unsupported DB, OS and Release combinations during an upgrade project but I didn't find any information which fits to my situation.
Does anyone have experience with this constellation? Is there an official statement concerning this request?
Thanks for you support!
Regards
Bernd

> So I opened the OSS Message (0000594749) to the component you mentioned but the support answered that this would be a consultant task to support me in this area (?!?)....
I know one person who works for/in this component who did this several times to me too.
> They asked me to open a thread here in SDN.
That person did that too.
> I send the message back to SAP and stated that I disagree with the statement that the confirmation of platform support is consulting...but until now I have no feedback.
Just insist on a statement. If you still get the message back, contact the CIC (support dot emea at sap dot com) since you seem to be located in the UK according to your business card) and ask them to give you a different message processor.
> So I hoped someone already has some official statement from SAP.
Those special support statements are valid for a specific installation only so even if someone would have it for their installation it may not be valid for yours.
> We would be running Production with release 4.7 on Windows 2008 for 3 weeks or so...and I will need official support for that, just for the case something goes wrong...
I don't think this should be a problem. Technically the kernel supports it (according to the note) and also the database.
Markus

Windows 2008 Standard SP2 inplace upgrade to Windows Server 2008 R2 Standard SP1 failing

Hi All,
I'm encountering an issue with performing an in-place upgrade of Windows Server 2008 SP2 to Windows Server 2008 R2 SP1.
Server details:
Virtual machine running on VMware ESXi 5.
Uninstalled AV and backup software
Domain controller also running AD Certificate Services#
UAC disabled
Running setup as a domain admin
When launching setup, the process completes "Copying Windows Files". After a few seconds or being on "Gathering files, settings and programs 0%", an error appears on screen -
Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation.
Error code: 0xC0000005
Errors and information up to the fatal errors in the setupact.log setup summary:
2013-04-28 19:26:35, Info MIG Loading replacement manifest data for Microsoft-Windows-WMI-Core
2013-04-28 19:26:35, Info MIG Loading replacement manifest data for Microsoft-Windows-WSRM-Service
2013-04-28 19:26:35, Info [0x080841] MIG UPGCSIAgent: Enumerating installed manifest source using C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll
2013-04-28 19:26:35, Warning [0x080405] MIG EnablePrivilege: AdjustTokenPrivileges failed (Error:0x514)
2013-04-28 19:26:35, Info CSI 00000001@2013/4/28:18:26:35.866 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7feeff78c85 @0x7fef1646a4e @0x7fef1646676 @0x7fef1647a53 @0x7fef164c291
@0x7feedd728ba)
2013-04-28 19:26:35, FatalError [0x090001] PANTHR Exception (code 0xC0000005: ACCESS_VIOLATION) occurred at 0x000007FEF00498CF in C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll (+00000000001498CF).
Minidump attached (107516 bytes).
2013-04-28 19:26:36, FatalError [0x090001] PANTHR Exception (code 0xC0000005: ACCESS_VIOLATION) occurred at 0x000007FEF00498CF in C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll (+00000000001498CF).
Minidump attached (107788 bytes).
The diagerr.xml has the two minidumps but they are just encoded straight into the xml file. Thanks for any assistance. /Ashley

Hi,
Generally such kind of issues are caused by third party programs such as CD burning programs, device driver etc.
First please refer to this article to see if there is anything helpful:
Guide for Upgrading to Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ff972408(v=ws.10).aspx
Meanwhile from the description, it mentioned a file under C:\Windows\winsxs. Check the permission of the folder amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6 and the file wcp.dll to see if the permission
and ownership are correct compare with the other folders.
Also as it provided 2 minidump files, you will need to use WinDBG to read the minidump files and see if there is any further information.
http://support.microsoft.com/kb/315263
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Windows server 2008 R2 to Windows server 2012 R@ Upgrade

We have Team Foundation server 2010 server configured in our environment.
operating system: windows server 2008 R2 Datacenter
Server installed: Team foundation server 2010 with share point services 3.0.
we need to upgrade this server with windows server 2012 R2 and Team foundation server 2010 as it is.
need to upgrade as below:
operation system windows server 2012 R2 Datacenter
Server Installed : Team foundation server 210 with sharepoint services 3.0 as it is.
I have tried to direct upgrade by running a setup of windows server 2012 R2 but it shows error message if : "
When you upgrade Windows Server 2008 to Windows Server 2012, you receive the following error message:
Windows won’t install unless each of these things is taken care of. Close Windows Setup, take care of each one, and then restart Windows Setup to continue.
Windows needs to be restarted so necessary changes to system files can be made before continuing.
Make these changes:
Turn off these Windows features.
Windows SharePoint Services 3.0 – Please read Microsoft Knowledge Base article: 962216
I have installed sharepoint 3.0 with sp3. but still I am geeing same error.
we need to upgrade operating system,n in place.
Kindly request you for the quick response.

Hi,
To understand more clearly regarding upgrading issue here providing you link for more information.
Upgrade Options for Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn303416.aspx
Install and Deploy Windows Server 2012 R2 and Windows Server 2012
http://technet.microsoft.com/en-us/library/hh831620.aspx
Hope it helps!
Regards.

¿Is it possible to upgrade from SCCM 2012 a domain controller in Windows Server 2008 R2 TO 2012 R2?

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Upgradation of OS(Windows 2000to 2008) of SAP R/3 4.7 C

Similar Messages

Maybe you are looking for