Upgrade 10.1.0.5 database to 10.2.0.4

I am in the process of wanting to upgrade the Repository database from 10.1.0.5 to 10.2.0.4. I already upgrading the oms and agent to 10.2.0.4. Someone told me it is like upgrading a regular database to 10.2.0.4 but I have not done a upgrade from 10g release 1 to release 2 before. Can someone direct me to the proper steps of upgrading the database?
Thanks,
Edward

http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/upgrading.htm#CIABIAAE
Chung
Application Management Blog

Similar Messages

Upgrade FIM 2010 R2 Sp1 Databases from SQL 2008 R2 to SQL 2012

Hi,
I want to upgrade my SQL from 2008 R2 to SQL 2012.
FIM Databases
1) FIMService Database
2) FIMSynchronizationService Database
Mentioned above are my FIM databases running on SQL server 2008 R2 . Now I was looking for some article which could tell me if SQL can be upgraded without affecting my existing databases of FIM or if i can move these databases to a new server having SQL
2012
Activity I want to perform : Create a fresh Server of SQL 2012 and move my FIM 2010 databases over it by restoring the backups. but as per the link below it seems not possible!
http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx

Hi Shivam,
Please take a look here: Release Notes for Forefront Identity Manager 2010 R2 SP1.
In the table you have tasks to upgrade SQL for FIMService and FIMSych.
FIM Service:
Upgrade FIM Service servers to FIM 2010 R2 SP1
Stop FIM Service on all servers
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Service on all servers
FIM Synch:
Upgrade FIM Sync to FIM 2010 R2 SP1
Stop FIM Sync
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Sync
If you are not making in-place upgrade, I would do something like here:
Stop FIM Services
Backup the databases at SQL 2008
Restore backed up databases on SQL 2012
Make sure SQL Agent Jobs are moved (FIMService)
Make sure Broker is enabled on FIMService database
On FIM machines create SQL alias using cliconfg utility. Alias should have the name of "old(sql2008) SQL" and point to new name/instance.
Start FIM Services - they would use "old" name to connect, but it would be translated to new location. So they would start.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Upgrade 10.2.4.0 database from 32bit (Windows 2003 os ) to 64 bit (windows)

we upgrade 10.2.4.0 database from 32bit (Windows 2003 os ) to 64 bit (windows).
the steps:
1. Install 10g server and client in 64 bit server and run patch set.
2. Restore rman db backup (from 32bit machine ) to 64bit server. Migrate database in new server.
3. setup EM db console in new server.
emca -config dbcontrol db -repos create
Step 1 and 2 work fine.
Step 3 has problem with emca:
java.io.IOException: The handle is invalid
at java.io.FileInputStream.close0(Native Method)
Enterprise Manager configuration completed successfully
at java.io.FileInputStream.close(FileInputStream.java:245)
at sun.nio.cs.StreamDecoder$CharsetSD.implClose(StreamDecoder.java:505)
FINISHED EMCA at Jul 1, 2010 9:33:06 AM at sun.nio.cs.StreamDecoder.close(Stream
Decoder.java:198)
at java.io.InputStreamReader.close(InputStreamReader.java:187)
at java.io.BufferedReader.close(BufferedReader.java:502)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine$ErrorStreamReader.r
un(SQLEngine.java:2406)
at java.lang.Thread.run(Thread.java:595)
After setup DB console, we can access DB console with https://localhost:1158/em,
but can not access from https://machinename:1158/em
Thanks,

It is offensive that you have posted the exact same question multiple times in a matter of minutes.
Please go back and edit all but one of them so the subject reads "Please Ignore."
I am ignoring this thread and all others until you clean it up. We are volunteers and do not appreciate having our time wasted by reading the same request from the same person multiple times while trying to help people that need help.
Thank you.

P6.2.1 upgrade to P6.7.0 database version miss match

Hello,
I was using Primavera 6.21 and i made an upgrade to Primavera 6.7.0
When i run my PMDB data base the following message pops:
The application and database versions do not match. Click Exit to close the application.
Primavera P6 7.0.0
Expected database version: PMDB,0700.0001.0001
Current database version: PMDB,0602.0005.0001
I am using SQL Server 2005
Can you help
Thank you

That means that your database was not upgraded. You need to upgrade the application and the database.
Run dbsetup.bat (in your media folder) to upgrade your database.

'dns' server failed to upgrade the Network Registrar configuration databases!!!

I have problem with installation the Network Registrar 7.2. According to the install log: "The 'dhcp' server failed to upgrade the Network Registrar configuration databases !!! See C:\NetworkRegistrar\Local\temp/dhcp_upgrade_status_log for details." The dhcp_upgrade_status_log is not found on my PC.
Do somebody familar with such problem?
Thank in advance.

Hi Dave,
Any luck on this thread? Where you able to find a work around on this problem? I am encountering also the same problem thou my OCR and Voting Disk are on raw partition.
I have done clean-up using the "dd" command and re-install CRS a couple of times and still with no luck...
Hope RAC gurus can help us on this.
Any help would be much appreciated.
Thanks!

Client Upgrade issue in Oracle Lite Database 10g 10.3.0.3.0

Hi all,
Details: My Environment is Oracle Database 11g R1(11.1.0.6.0) With Oracle Lite Database 10g R3(10.3.0.3.0) on Windows 2003 Server R2 SP2.
Recently i have upgrade my oracle lite database from 10.3.0.2.0 to 10.3.0.3.0 and also applied recent opatch (p12812978_103030_Generic.zip). Upgrade and installation of opatch got successfully completed. When i tried the client synchornization for the very first time (FCS and Data Download) FCS and Data Download got Successfully completed but the problem is usually Once the FCS and Data Download Got Completed , Screen goto webtogo home page but in my case i am getting a screen name called "client upgrade" with options yes or no if choose yes it prompting please wait screen nearly for 1 hours i am not getting any response from the screen. if choose no simply it goto my webtogo home page. Please Note before choosing the yes option i have checked what version i am currently having it show 10.3.0.3 i don't know why it asking for the client upgrade. Please Advice me on this how to avoid this screen (Client Upgrade).
Thanks
Shan

Hi,
i am not upgrading the existing environment of Oracle Lite Client i am creating a new environment which doesn't have the Oracle Lite Client. In the document itself they have mentioned like this "These steps assume that you have a 10g Release 1 or 2 Branch Office environment already configured and synchronized. If you do not have this environment currently configured, you do not need to upgrade." To be Clear What i am doing is with help Oracle Lite Branch Office i will be downloading a user from Mobile Server for that i have to do the following
1.FCS(Fresh Client Setup for that i have to run the setup.exe which is coming for Oracle Lite Branch Office) and
2.Data download (Data will be get download from Mobile Server in the form of odb),
3. Usually Once the FCS and Data Download got completed, the screen will goto the webtogo home there i can see my branch offlice applications.
4. But in my case i am getting prompted by screen and the screen name called "Client Upgrade" with options yes or no if i choose yes screen got hanged else if i choose no then only screen moving the webtogo home page. Say can u r having existing environment in your machine due to some reasons u have upgrade or u have installed optach on the mobile server in that case while doing the client synchronication we can do the client upgrade by running the update.exe becasue client side will having the old binary file we need to renew it.
5. But I am not upgrading the existing environment. I am creating a new environment which means i am doing a fresh client setup and synchronization for the very first time. While doing the FCS on my client side for the very first time i will be getting the latest binaries rite then why the screen is moving to client upgarde page i don't have any idea on this.
Please Advice.
Thanks
Shan

Oracle 9i database software upgrade issue with standby (Dataguard) database

All,
I have encountered a problem in upgrading the Oracle software on 2 of our databases in-house. The databases in question here are using Dataguard, so one is set to primary and one is set to standby. The version that they are/were starting at is 9.2.0.7.
I was able to install and complete the 9.2.0.8 and 9.2.0.8 OCT CPU patches on the primary database, however when I moved to working on the standby database, I am got an error when attempting to follow step 6 of the post installation tasks:
Enter the following SQL*Plus commands:
SQL> STARTUP MIGRATE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
SQL> SPOOL OFF
(Please note that this is my first experience with working with Dataguard, so my methods in updating might have been a bit off-base.)
If I attempt to startup the standby database in MIGRADE mode, I get the following error (which is expected):
ORA-01666: controlfile is for a standby database
If I try to run the catpatch.sql script, even after mounting the database in standby mode, I receive the additional error:
ORA-01219: database not open: queries allowed on fixed tables/views only
My question here is, how do I get the standby database to allow me to finish the software upgrade process, so that both versions of Oracle match on the primary and standby databases? :)
(I did try some research on Metalink, but only found an article detailing how to upgrade your dataguard database from 9i to 10g, which did not look especially helpful in this case...)
Thank you!
-Sabrina

Depending on the kind of Dataguard you currently have, physical or logical, there are two useful metalinks notes:
Upgrading to 10g with a Physical Standby in Place
Doc ID: Note:278521.1
Upgrading to 10g with a Logical Standby in Place
Doc ID: Note:278108.1
~ Madrid
http://hrivera99.blogspot.com/

Step By Step Upgrade Oracle E-Business suite database from 11.2.0.3 to 11.2.0.4

Dears,
please need help in upgrade Oracle E-Business R12.1 DataBase from 11.2.0.3 to 11.2.0.4 in details:
my environment is:
Operating System : Oracle Solaris Sparc 10.8 X64
Oracle Applications : R12.1.3
Thanks
Osama Mohamed
Hussein Sawwan-Oracle

Hi,
In addition to all above notes also refer my blogpost for using 11gR2 database in EBS R12.1,
All steps will be similar and you may need to apply some additional pre-requisites RDBMS patches.
Oracle 11gR2 database upgrade in Apps R12.1.1 | Apps DBA Workshop
thanks,
X A H E E R

Repository upgrade from 8i to 10g database

We are currently upgrading from the 9i developer suite to the 10g developer suite. The repository for the designer tool resides on an 8i database and I want to migrate to a 10g database. Does anyone have any suggestions on how to best do this?

Bruce,
You could take a Complete Export of the repository on the 8i Database and then import it back into an new Repository user on the 10g Database using the RAU.
Please take care that proper Import/Export utilities are used to perform this action.
Regards,
Ritu

Upgrading with a physical standby database in place

Hi all
I am planning to upgrade my database which is 11.2.0.1 (Windows 32 platform) to 11.2.0.3. It has a primary standby database. I only have 1 server for testing the primary database, so I am looking for some help.
I was reading http://docs.oracle.com/cd/B28359_01/server.111/b28294/upgrades.htm#CHDBJAGG and I confuse about step 4 and 5
+4. Install the new release of the Oracle software into a new Oracle home on the physical standby database system, as described in the Oracle Database Upgrade Guide.+
+5. Mount the physical standby database.+
My question is in step 5, when I mount the physical standby database, does it mounted using new Oracle binary or still using the old version? From my understanding what is step 4 doing is to copying files to new home only. Changing the service to use the new oracle binary is done by dbua. I know this when I test upgrading the primary database.
Regards
Stanley.

Hello;
new Oracle binary or the new Oracle home if you will.
So you install the new software on the standby only, all the upgrade SQL gets done on the Primary and then you ENABLE and startup mount on the new oracle home and the standby gets upgraded from the Primary redo.
Its pretty simple ( My exact plan )
1. Disable log shipping from the Primary
2. Shutdown Standby
3. Install 11.2.0.3 on Standby - Just the software
4. Startup Standby in recovery mode - do NOT run r any SQL at the standby
5. Shutdown Primary
6. Install 11.2.0.3 on Primary
7. Run Upgrade SQL or DBUA at Primary
8. Re-enable log shipping
9. Monitor the redo apply from Primary to Standby - this will also upgrade the Standby data dictionary
Make sure your tnsnames and listener files move to the new Oracle home and edit as needed.
Another oracle note is 278641.1
Best Regards
mseberg
Edited by: mseberg on Jan 29, 2013 8:21 PM

Upgrade EBS 12.1.3 database to 11GR2 new environment file host name lowercase

We just finished EBS 12.1.3 upgrade database from 11.1.0.7 to 11.2.0.3 on REDHAT /INUX server. EBS version is no change.
after we run :
$ perl $ORACLE_HOME/appsutil/bin/adbldxml.pl
$ORACLE_HOME/appsutil/bin/adconfig.sh contextfile=/u4/oracle/EBSTST01/db/tech_st/11.2.0.3/appsutil/EBSTST01_ora01.xml
It come out two environment files and host name all lower case:
/u4/oracle/EBSTST01/db/tech_st/11.2.0.3/appsutil/EBSTST01_ora01.xml
/u4/oracle/EBSTST01/db/tech_st/11.2.0.3/EBSTST01_ora01.env
before upgrade environment files host name are upper case. When run adconfig.sh we also type in upper case host name.
any one know what wrong?
Thanks.

due to new XML file hostname is lower case. Some one tole me I can rename and edit file change Hostname to upper case.
$ perl $ORACLE_HOME/appsutil/bin/adbldxml.pl
output file : /u4/oracle/EBSTST01/db/tech_st/11.2.0.3/appsutil/EBSTST01_ora01.xml
Can I:
rename /u4/oracle/EBSTST01/db/tech_st/11.2.0.3/appsutil/EBSTST01_ora01 ==> /u4/oracle/EBSTST01/db/tech_st/11.2.0.3/appsutil/EBSTST01_ORA01
then edit : /u4/oracle/EBSTST01/db/tech_st/11.2.0.3/appsutil/EBSTST01_ORA01 file content change lower case hostname to upper case.
Will it work or not?
Thanks.

Upgrade Oracle e-business suite database

Hi
Please any tell me what are the steps I should follow in upgrading oracle e-business suite 11.5.10.2/Oracle 9.2.0.5 on HP Unix pa RISC 64 bit. to oracle 10.2.0.4
Thanks
sva

Hi again Sva;
I suggest before you dont start upgrade chech Hussein Sawwan's greatest post about same issue:
upgrade forms on upgrading DB from 9i to 10g
9i to 10g upgradation
Please check those docs too:
Oracle Database Upgrade Guide
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/toc.htm
Regard
Helios

Upgrading Installations that use Standby Databases

I have applied patch 6810189 and upgraded Oracle10g Database on my local machine, Now I am planing to apply it on test machine for that I need additional steps for upgrading Physical Standby database as said in README.html of p6810189_10204_Win32.zip
*7.1.2 Upgrading Installations that use Physical or Logical Standby Databases*
For information about physical standby databases, review document 278641.1.
Can anybody forward me this document or any suggestions for upgrading physical standby database..
THanks.

thanks :)
but I am looking for complete steps, starting from applying patch to production then at standby database.... etc..etc

Lost Music with upgrade 9.2 - Found iTunes Database File???

When I upgraded to 9.2 itunes, I lost all the music I had downloaded from CD's. I found the itunes database file dated October 2007 in the Previous iTunes Library Folder. How do I get that music back on the itunes library dated August 2010 which was the date of the upgrade?? Thanks for any help you can provide.

Are you saying there wasn't an ITL file with a more recent date? There should be one from the date you upgraded to 9.2 if it is on the same PC and same windows userID.

Database upgrade through DBUA cant detect database

Hi,
I have a HP UNix box . There are 7 instances 2 in 9.2.0.8 and 5 in 10.2.0.1 upgraded earlier than my joining. I want to upgrade one of the 9.2.0.8 databases.
The database to upgarde is up and running and can be connected through listener.
I login as the owner of ora10g and start dbua. It shows me all the 7 databases but when I select the database to upgrade it throws the following info :
The Upgrade Assistant Failed in bringing up the database xxxx. Oracle Home /oracle/9.2.0.8 obtained from /etc/oratab was used to connect to the database. Either the database is not running from Oracle Home /oracle/9.2.0.8 or correct Initialization pfile was not found.
It then asks for pfile. -----------------------------------
The database is up and running.The Oracle home is also correct in Oratab file.
I checked the sqls.log file
It has info like
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
set sqlprompt 'SQL>';
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
connect /****** as SYSDBA
select count(*) from v$instance;
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
Please help on this issue . Y cant the DBUA see that database is up?

Are you able to start/stop instance by using the dbstart/dbshut command? If not, verify your oratab files has accurate information and it has the Y flag to let the admin scripts manage the instance.
~ Madrid.

Upgrade 10.1.0.5 database to 10.2.0.4

Similar Messages

Maybe you are looking for