Upgrade 10 10.6.5 - Office 2004 and Acrobat not working

Using OSX 10.6.5 2 users, MS Office 2004, Acrobat 8 Pro. installed all updates. After Upgrade to OSX, MSOffice now has database daemon hang problems (quit daemon Word then loads), messages = Microsoft Framework cannot load. Adobe Acrobat cannot read or print any word documents. I am dead in the water here.
Any help appreciated.
ss

Welcome to Apple Support Discussions.
I'm not using either but so far I haven't seen any issues with this forum on either on 10.6.5. You can also cross post to the Snow Leopard Installation and Setup forum at:
http://discussions.apple.com/forum.jspa?forumID=1337
Finally I'd recommend posting to MS Office for Mac Forum located at:
http://www.officeformac.com/productforums/
I'm sure Adobe has similar forums however I'm not an Adobe customer so I can't recommend a forum, but I'm sure you can locate one at Adobe's web site.
Good luck,
Roger

Similar Messages

  • Upgraded window to win 8. reinstall itunes and could not work... help

    Hi
    I upgraded windows 7 to windows 8.  Reinstall itunes after uninstalling the older version.  But this message keeps appearing.
    iTunes Installer Completed
    The installer encountered erros before iTunes could be configured.
    Errors occurred during installation.  Your sistem has not been modified.
    Please run the installer again  or click Finish to exit.
    Lost ... please kindly help.

    iTunes 11 is not supported in Windows 8.
    I heard some users made it work but you have to Google for it.

  • Upgraded to Lion.  Microsoft office home and student 2007 not compatible.  what do i need to do to be able to access files?

    Upgraded to Lion.  Microsoft office home and student 2007 not compatible.  what do i need to do to be able to access office files?

    RRFS is correct, however you are incorrect. There is no such thing as MS Office for Mac 2007, your software is probably MS Office for Mac 2004! You can upgrade to MS Office for Mac 2011 for as little as $97 at www.macsales.com or Amazon has it for $90.00.
    Once you have upgraded all of your Office data files can then be opened.

  • Office 2004 and Tiger 10.4.6 autoupdate issue

    Anyone who is using autoupdate in Microsoft Office:
    After installing office 2004 on a Powerbook G4 running 10.4.6 (updated from 10.4.5), I ran the autoupdate function in office, it pulled in autoupdater 1.1.2. After running update again, I get "The Application "Mircosoft AutoUpdate.app" cannot be launched.
    -10661
    Can anyone who has 10.4.6 installed try the autoupdate function in Office 2004 and see if it works?
    any ideas?

    Hold off on the 11.2.3 update. It is being said that it is seriously flawed. My own experience is that I wished I never did it. Entourage is close to completely unusable with no way to revert since the update alters the database.
    Other problems with the other apps are being reported also.
    Beware.
    Just went to open Entourage and it says that my database is corrupt and I can not use it. That's just "F"ing great. I have had more database issues since updating. DON'T DO IT!

  • Lion - 2004 MS Office for Mac will not work

    My 2004 version of Microsoft Office for Mac will not work in Lion. I suspect because this is a PowerPC application. My question is this:
    Is there any program out there which will map the PowerPC to an Intel format? Other than trying to seel more products, I am surprised that Apple does not supply a mapping program for products made by Microsoft for the Apple devices.

    Eric, can you tell me where please? It's not mentioned on the Lion compatibility pages at all. (http://www.apple.com/uk/macosx/what-is/compatibility.html) nor on the 'how to upgrade' page (http://www.apple.com/uk/macosx/how-to-buy/)

  • I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

    The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

    You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011

  • Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone"  It worked before but now it doesn't...I don't think I should have to buy a new one...

    since I upgraded to the new operating system my charger no longer works...
    It says"this cable or accessory is not certified and may not work reliably with this iPhone"

    Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
    After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
    Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

  • HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

    Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
    When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
    Anyone else have this issue after they upgraded the iOS system?
    Thanks,

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • OFFICE 2007 and Acrobat

    I had reported on some issues of using OFFICE 2007 with Acrobat 7 and 8. I suspect there was a problem with AA9 also. Typically the result would be graphics with lines through them, at least when expanded. This would often appear that your graphic had been split into parts and pieced together in Acrobat. SP2 for OFFICE 2007 was released recently and I went back to test this issue with the new release. At this point it appears that everything is working great. This follow up is to suggest updates to BOTH OFFICE 2007 and Acrobat if you are having some problems. On this machine I am running VISTA business, OFFICE 2007 (SP2), and AA8. Bill

    Thanks for the update.

  • [SOLVED] Xorg and keyboard not working after upgrade.

    Hi guys,
    after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
    I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
    Any hint?
    How do you recover a system once it's gone like this? Many thanks in advance.
    J
    Last edited by ifsixwasnine (2013-12-23 13:58:16)

    WonderWoofy wrote:
    I wouldn't necessarily call this [SOLVED].  At best I would probably mention that you found a workaround.  The addition of '(downgrade)' likely makes it fine, but just FYI for future threads.  There are two reasons for this.  One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
    Just my 1.46¢
    You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
    Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
    The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
    1. Chrooted into the system
    2. Wiped /boot
    3. Re-installed grub
    4. Re-installed linux kernel
    5. Re-created grub.cfg
    6. ???
    7. Profit
    I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

  • After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

    After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out.  There is no function at all.

    Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo.  It was suppose to show you how much data you use to help keep you within your limits.  If you have downloaded this, go through your settings and delete it and it will fix the problem.  At least it did for me.  I can now send photo's to non Iphone users via text no problem.

  • After upgrading to itunes 7.3.2 system sound does not work

    I recently upgraded my itunes to 7.3.2 and the sound worked for a short time. it then began to cut on and off until ceasing to work completely after a day or so. I have run diagnostics and my computer can produce sound, but not in any programs or any of the system sounds. i reinstalled windows xp and the sound worked, but when i installed itunes again the sound once again stopped completely. i have checked all the drivers, codecs, hardware etc. and they seem to be in order. what is going on?

    I really struggled with this one and my IT people couldn't help.  They suggested that I add my secure corporate website to the Java Exceptions Sites, and use the Java client, but that didn't work.  I tried the CITRIX Native CLient (ICA Client) and that didn't work either.  So, I searched my Mac for all of the instances of CitrixICAClient, or anything else with ICA in it.  I then deleted all of those files, shut down Safari, rebooted my computer and tried again to log into my corporate site using the Native Client conenction option.  I remembered from years ago, that the first time you try to connect using the native client, that Citrix plugin is downloaded.  THat's exactly what happened and I haven't had any more problems.  So apparently, you have to clean up a little adn make sure that any "old" citrix products are removed.

  • After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

    After I upgraded to Maverick my Epson WF-2504 scanner will not work.  There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download.  It tells me to go to "software update" ???  Any suggestions?

    Thanks Arthur,
    I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
    One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
    I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here.  If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
    I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
    Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
    A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
    Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

  • I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Question
    I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
    ::Worked for me::

Maybe you are looking for