Upgrade 10.2.0.5 on linux from 10.2.0.1
I am on redhat 4 entreprise server OS 4.6 and i want to install patchset 10.2.0.5
i have glibc 2.34 on this machine
the installer says to me that the glibc must be upper than 2.32 but not equal to 2.34 and 2.39
why
I cannnot use another glibc
how to workaround this constraints?
here is the exact cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.40GHz
stepping : 10
cpu MHz : 3401.577
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est cid xtpr
bogomips : 6804.46
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.40GHz
stepping : 10
cpu MHz : 3401.577
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est cid xtpr
bogomips : 6799.38
Similar Messages
-
Steps to upgrade to 10.1.3.4.1 from 10.1.3.4.0 in Linux...
Hi,
Can you please suggest the steps to follow to upgrade to 10.1.3.4.1 from 10.1.3.4.0 in Linux...
Thanks in advance.when u try to install it will give u a option to upgrade or install when you click the upgrade it will guide you
-
Migrate to Messenger 3 on Linux from 2.2 on Netware?
Hi,
I know Messenger 3.0 is only Windows and Linux, and we've been thinking about moving the messenger service for a while. But there doesn't seem to be any mention of how to migrate from Novell to Linux, from Windows to Linux yes, but no thinking about legacy Netware installs wanting to move across. Any thoughts?
Mark.MarkDissington wrote:
>
> Hi,
>
> I know Messenger 3.0 is only Windows and Linux, and we've been thinking
> about moving the messenger service for a while. But there doesn't seem
> to be any mention of how to migrate from Novell to Linux, from Windows
> to Linux yes, but no thinking about legacy Netware installs wanting to
> move across. Any thoughts?
>
> Mark.
>
>
I migrated from Netware to Linux a few years ago. It was clustered as well.
Actually I think the move may be easier than it was with other products.
Basically made the volume that had the all the files on it available to
linux and did the install. On the new 3.0 you need to tell it directory
based when you start the extend schema. It will come up fine. I do like how
clean the install/upgrade went here. -
Problem: this mac is not reading an excell file after upgrading to yosemite. My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it. Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite... Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice. -
After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?
That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
How can I boot linux from usb drive and/or dvd drive on a windows 8 laptop please?
Hi all,
Could someone describe how to set my windows 8 laptop to boot linux from usb and or dvd drive step by step please? I have HP laptop. Thank you.http://www.cisco.com/en/US/prod/collateral/modules/ps6247/prod_qas0900aecd80232483.html
Q. What sizes of USB Flash sticks are supported?
A. USB Flash sticks are supported in 64, 128, and 256 MB sizes. No other sizes are supported.
Q. Can I use any USB memory stick for this application?
A. No. Only Cisco USB memory sticks are supported.
Q. Can I boot an image directly from the USB Flash module?
A. Yes. USB drivers have been added to rommon, starting with version 12.4(13r)
Q. Can I format the USB Flash module on the router?
A. Yes. You can format the module on either a router or a PC. You must specify "FAT16 file system" as the file system for the PC format process to use.
If your setup satisfies above conditions you can get the router to boot up with the IOS on the USB flash
If you are in ROMMON mode, use 'dev' to find out the name of the USB Flash (should be usbflash0).
set BOOT=usbflash0:
If you are in the router,
boot system flash usbflash0: -
Pages tells me I need to upgrade to 5.0 to open documents from iCloud, but the mac app store says its already installed and won't let me upgrade. when I check the version of pages I am running it says 4.3. I just want to be able to open documents on my mac that were created on my iPad. How can i get Pages 5.0?
Welcome to Apple Support Communities
You already have got Pages 5.0, but you still have got Pages 4.3, so Pages 4.3 is being opened instead of the newest version, being this the reason why you get a message telling you to update Pages to the most recent version.
If you don't need the old version, open a Finder window, choose Applications in the sidebar and delete the old Pages icon or move it to an external drive. I don't recommend you to do this, as users are complaining about the lack of features of the new version.
Instead, what you can do is to put the new Pages icon in the Dock by dragging it from the Finder window to the Dock, so you can open the new Pages version from the Dock and you can open all your documents with it after opening the application -
How do I upgrade elements 10 to open raw files from my Canon 70d?
How do I upgrade elements 10 to open raw files from my canon 70d?
Normally, if there are any updates for your version of PSE then they should be offered to you automatically. However, you can also check if there are any new updates by going to:
Help >> Updates
If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market. We are currently at version 13 so version 10 was stopped long time ago. However, you can see a workaround at this link where I posted a video to get things moving:
<Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
Hope this helps. -
How to install Linux from a distro instead of booting a live cd?
Suppose you have Arch Linux installed in sda and you want to install a new copy in sdc, can you do it from your distro instead of booting with the installation cd?
Here's my sdc (75 GB):
/dev/sdc1 ntfs 100 MB
/dev/sdc2 ntfs 40 GB
those partitions are used by Windows 7, so there's another 35 GB for Linux.
Now here's the the problem: this latest Arch Linux install media is kinda complicated because it does not provide the AIF anymore. Also, the installation method differs a little from the old ones. Until 2011.08.19 I would partition the remaining space like this:
/dev/sdc3 extended 35 GB
/dev/sdc5 ext2 100 MB /boot
/dev/sdc6 swap 1 GB swap
/dev/sdc7 ext4 15 GB /
/dev/sdc8 ext4 19 GB /home
However this guide http://ebalaskas.gr/wiki/archlinux/netinstall shows a different (suposedly recommended) partition table for the new method.
So,
1) Is it possible to install Arch Linux from an already installed distro, including GRUB2?
2) Is it possible to use the partiton table style I provided?
And how to do it of course.
Thanks!Check this article out
https://wiki.archlinux.org/index.php/In … ting_Linux
Note that it says it is out of date because of pacman. Really all you need to know is that pacman uses signed packages now, so it is now necessary to run the pacman-key stuff. Or set SigLevel = Never in pacman.conf
Edit: IMHO the first method is preferred because it more closely resembles a regular install. Ergo, you will be able to semi follow the beginners guide for config and such.
Last edited by WonderWoofy (2012-08-17 03:42:12) -
I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4 and can it be done on a g4
If you have a processor of 867 MHz or faster and a minimum of 512 MB of RAM, you can run OS X Leopard, updated to 10.5.8.
That's as far as a G4 can go.
Check eBay for discs:
http://www.ebay.com/sch/i.html?_nkw=Mac+OS+X+10.5+Leopard+Retail&_sacat=0&_odkw= Mac+OS+X+10.5+Leopard+Full+Retail&_osacat=0
No Snow Leopard, 10.6x or Lion, 10.7x.
they won't run in a PPC Mac. -
I upgraded fro iphone4 to iphone5. i restored from backup in iCloud, and almost everything is there perfectly. there was one app on the phone, which i clicked on to finish the install, but it then disappeared. in my iTunes, under library/apps, this app still shows there. how do i reinstall this app. it was a paid app, and i searched the app store, and apparently it is no longer there.
any help would be greatly appreciated.It appears to be fixed, he had multiple versions of iTunes installed (since he put his iTunes in a different folder) the iTunes icon launched the old iTunes, even though the new was installed. it's working now.
-
I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
ThanksCME is part of the IOS, so you can't upgrade the IOS seperately from CME.
That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
Brandon -
Upgrading to CS6 Design and Web Premium from CS4 Design Premium Install Failure
I am trying to upgrade to CS6 Design and Web Premium from CS4 Design Premium on Win 7 (32bit). I am nistalling from the DVD which was purchased from the Adobe Store. The box says it is for Upgrading from 4 or 3x. I am entering the CS6 serial number and it is able to validate it. When it goes into the Preparing to Install mode the status bar never changes and after what seems like a very long time the Installation failed message is displayed. I ran the Adobe Support advisor and followed the link to the page that tells you how to resolve the issues and chose to go into the registry and look for "In Progess". There was no "In Progress". I have the serial numbers for CS4 and CS6 so they should be valid given that both were purchased through the Adobe Store. I am very frustrated!!!!!!!!!
Installation Status:
Installation failed:
Adobe Advisor Results:
Regestry:I downloaded and installed the Application manager and re-started the installation. This time it got to installiing the applications and after 3 hours it was only 55% completed and showing that it was installing Acrobat and had 2 hours to go. It seemed to be stuck so I cancelled the install.
-
T400s Linux/Windows dual boot with Linux from Esata Flash Drive
This project is about a dual boot Windows/Linux system without using the normal dual boot changes in the bootloader of the windows hard drive. When I started this I found bits and pieces of information on the web but no complete description so I wrote this post.
I have done a dual boot system on my previous Thinkpad where I had partitioned the hard drive between Linux and windows. For this project I wanted to leave the windows hard drive absolutely intact and unaltered, and boot Linux from a flash drive in the esata port on the back of the T400s. Obviously this uses the F12 boot list function key to boot from the flash. The advantage of this is that Windows is totally unaltered and when I need Linux, I plug in the esata flash drive, hit F12 during the boot cycle and select booting from the esata flash drive. The reason for Esata rather than USB is simply speed. I have a nice fast Linux installation.
I used the OCZ esata flash drive but suspect any of the alternatives will work. It did not need the accessory usb cable because the Thinkpad powered the esata flash directly.
To boot from the esata drive I had to make the following changes in the bios
I left the esata flash plugged in as I went into the bios
Bios>config>Serial ATA and changed the Sata controller mode option to compatibility
Restart and back into the Bios
Bios>startup>boot - in my case the esata flash drive showed up as ATA HDD2 and was excluded from the boot order so I had to un-exclude it and move it to the point in the boot order that I wanted.
Next I downloaded a linux installation iso and put it on a CD - in my case opensuse. Then booted from the CD
From now on this instructions are specific to opensuse and yast but can be generalized to whatever Linux is being used.
In my case yast came up with a good set of suggestions for automatically partitioning the flash drive but then crashed during the partitioning itself. So I rebooted and specified the partitions manually.
A fat32 partition left as a partition which both windows and Linux could see (in my case about 20% of the drive) (/dev/sdb1)
An extended partition with the remainder of the drive (/dev/sdb2) which contains the following logical partitions
A linux Swap partition of 2GB (/dev/sdb5)
A linux /home partition –the remainder of the drive (/dev/sdb6)
A linux /root partition of 8GB (/dev/sdb7)
Yast automatically suggested mount points of C,D,E for the windows partitions. Unfortunately because of the way the Thinkpad hard drive was laid out Yast had C assigned the ThinkPad Service partition and D assigned to the SW_Preload (or main windows partition). However there was an edit function that allows for the reversal of those mount points so that the windows C drive is mounted in Linux as Windows/C thereby avoiding confusion. I had already backed up and removed the Thinkpad factory install data so I did not have to deal with that. Yast suggested Windows/E for the mount point of the FAT32 partition on the flash drive, which I accepted.
The yast install configurator made all this manual selection easy, and after the manual configuration the partitioning worked perfectly.
Next step was Linux user configuration which went fine
Next was booting.
In the section management tab
delete the windows 1 and 2 options (since we are not dual booting directly)
In the boot loader installation tab
uncheck boot from mbr ( this stops the install from installing Grub and dual boot on the windows c drive
check boot from root partition (this installs grub and all associated files in the Linux root partition (/dev/sdb6)
I believe that the correct procedure at this point is to click Boot Loader installation details which will bring up the Grub device map. In the device map there will be a line for the fixed hard drive (aka the windows drive) and a line for the esata flash drive. When the installer started up these were in hard drive and esata drive order. However when we boot directly from the flash the esata drive will be grub drive hd0 and the fixed hard drive will be grub hd1. The device map order needs to be changed to reflect this ie the esata drive should be first not second.
I did not do this and ended up initially doing Grub command line editing to boot and later manually editing the grub files using information I had previously learned the hard way and through google.
At this point let the installer go ahead and install Linux. After doing this it should come back and tell you to reboot. Do not do it yet because we need to install the MBR into the flash drive.
I suspect that there is a way of doing this in Yast running from the Live CD but it was not obvious to me so I used the manual method that I have used before.
Open a root terminal
Mount /dev/sdb6 to /mnt/sdb6 (my linux root)
Touch /mnt/sdb6/boot/grub/flag
The purpose of this is when we go looking later at the grub command prompt we need an easy to find unique file
Start grub and do the following
#grub
grub> find /boot/grub/flag
(hd1,5) -- the result of the find in my example
grub> root (hd1,5) -- using the result of the find in my example
grub> setup (hd1) -- install mbr -- my example parameters - if you get this wrong you will trash some other drive!!!
hopefully grub announces success
grub> quit
Reboot and select the flash drive. In my case I still had the grub devicemap wrong and had to edit the grub commands during boot to tell grub how to find the correct partition and then edit them again after booting
Typical linux install issues that we all always seem to have and can be solved with a little (or a lot of) google research.
As I said at the beginning I now have an untouched windows installation and a nice fast Linux installation. I hope that this will be of some use to someone.Hi chrissh
i tried this exact procedure... on the exact same notebook (T400s). However, as soon as I set the
Bios>config>Serial ATA to "compatibility", I cannot use my default Windows installation! I immediately get the "blue screen of death".
I doubt I did anything differently since this is the first step of your procedure and my laptop is brand new!
any idea? -
My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(& I don't have recovery disc available). What do I do now?
Try using another computer. I had the same problem, repeated the given solution many times and each time it failed. Then I connected ipad to another computer and it worked immediately. Then I used the first computer to restore a backup.
Maybe you are looking for
-
Why more people don't use iWork Revealed
I just upgraded to Lion and am faced with upgraded a number of my computer apps. I have used Office for eons but have Pages and Numbers on my iPhone and iPad but have NEVER thought of iWork with any seriousness. Until today. In ready about Lion and M
-
Hi, since yesterday I'm installing and configuring windows 7 x64 german at my Lenovo T500. After fresh install it seems to miss not soo many device drivers - so I installed the bunch of Lenovos windows 7 beta program. The following I don't get to run
-
Cannot do a 5.1 mixdown in CS6
I am creating a 5.1 surround sound mix in Audition CS6 (tracks exported from Premiere Pro). After carefully panning each track in my 5.1 field I am ready to do a mixdown. Unfortunately, that option is greyed out. It must be because I am not assign
-
Office 365 with Office 2013 MSI Language Pack on Windows 7 machine.
Hello All, I have Office 2013 MSI Language Pack installed on Windows 7 machine. After deploying Office 365 using ODT, Lync is crashing. Is Office 2013 MSI Language Pack compatible with Office 365? Thanks in Advance !!
-
Dear All. Here we use z programs for conformation of Rem activated Materials (ZMFBF). While Doing conformation for REM activated materials, the system allows me to do conformation only once for a planned order even though planned order is still Open.