Upgrade 10.4 to 10.5 virtual users
Hi,
I am planning on migrating 10.4 users to a new 10.5 machine. I plan to follow the Upgrading and Migrating <http://images.apple.com/server/macosx/docs/Upgradingand_Migratingv10.5.pdf> guide to get all their mail moved.
One question I have is that their mail will be a virtual host on the 10.5 machine. So are the instructions in the Migration guide the way to go here?
Here's a summary of the guide:
Mail Database
If you want to reuse the Mail service database and store, stop Mail service if it’s running
and save the mail files. When Mail service is not running, you can copy all Mail service
directories.
By default:
• The mail database resides in /var/imap/.
• The mail store resides in /var/spool/imap/. You can back up individual mail storage
folders or the entire mail store.
The ditto command-line tool is useful for backing up mail files. For more information
about ditto, see its man page.
Also, save a copy of the file /usr/bin/cyrus/bin/ctl_mboxlist so you can move it to the
v10.5 server in Step 4 on page 36. You need this file to migrate the mail database
successfully in Step 7 on page 39.
Mail Database
To migrate the mail database:
1 Make sure that v10.5 Mail service isn’t running.
Open Server Admin, then click Mail. If the Mail circle on the left side is not grayed out,
click Stop Mail at the lower left.
2 Restore the saved mail database and mail store.
By default the mail database resides in /var/imap/ and the mail store in /var/spool/
imap/.
3 Make sure the mail directories and their contents are owned by the _cyrus user and
mail group.
4 Rename the saved ctl_mboxlist file to ctl_mboxlist.old and then move it to /usr/bin/
cyrus/bin/.
If ctl_mboxlist.old is not present, the upgradedb script will fail in step 8 below.
5 In Server Admin, select Mail from the list of computers and services.
6 Click Settings, click Advanced, and click Database to indicate where you restored the
database and mail store.
7 Click Save.
8 Run the mail database upgradedb script:
sudo -u cyrusimap /System/Library/ServerSetup/MigrationExtras/
61migrate_cyrusdb
9 Run the following command to insure that the index files for all mail accounts are in
good working order:
sudo /usr/bin/cyrus/bin/reconstruct –i
10 In Server Admin, start Mail service by clicking Mail, then click Start Mail.
Are you saying the domain(s) are not virtual on 10.4 but will be on 10.5?
If yes, best to migrate first and then move domains from local to virtual.
Virtual domains in 10.5 are inconsistent. See this for help: http://osx.topicdesk.com/content/view/45/62/
Alex
Similar Messages
-
Hi folks,
arch64 0.8
I need to install following packages building virtual users;
postfix
posfixadmin
courier
mailscanner
clamav
# pacman -Ss postfix
extra/postfix 2.3.6-1
Secure, fast, easy to administer drop in replacement for Sendmail (MTA)
extra/postfix-mysql 2.2.11-2
Secure, fast, easy to administer drop in replacement for Sendmail (MTA)
Whether postfix-mysql is dependencies which will be installed simultaneously on installing postfix 2.3.6-1? Tks.
# pacman -Ss posfixadmin
No printout. Please advise which repository needed to be enabled to install this package. Tks.
# pacman -Ss courier
extra/courier-authlib 0.59-1
Authentification library for the courier mailserver(s)
extra/courier-imap 4.1.2-1
IMAP(s)/POP3(s) Server
extra/courier-maildrop 2.0.3-1
mail delivery agent - procmail like but nicer syntax
extra/courier-mta 0.54.2-1
IMAP(s)/POP3(s) and SMTP Server with ML-manager, webmail and webconfig
I suppose they are group packages? Tks
# pacman -Ss mailscanner
No printout. Where can I get it . TIA.
# pacman -Ss clamav
extra/clamav 0.90.1-1
Anti-virus toolkit for Unix.
Tks.
B.R.
satimisHi,
This error might be caused by one of the following conditions:
•The printer is not reachable on the network
• Windows cannot allocate sufficient memory
• There was invalid or incomplete data received by the print spooler
• A driver upgrade failed
• There is a bad printer device driver
You can go through beneath article might helpful in your case. (Though article for 2008 but can refer for troubleshooting issue)
Event ID 6161 — Print Spooler Status
https://technet.microsoft.com/en-us/library/cc773865(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I've only just recently migrated to OSX server since the release of snow leopard. Ive come from a debain server.
I used to be able to have a virtual user table under sendmail allowing me to have multiple domains with similar usernames in each domain thus:-
[email protected] domain1username
[email protected] domain2username
It seems under workgroup manager (is this the place to add these?) under shortnames even if i create a shortname for domain1username that is [email protected] and a shortname for domain2username that is [email protected] the mail server wont allow mails for [email protected], bouncing with the error message <[email protected]>: User unknown in virtual alias table
Can anyone shed any light or point me to a manual/fix?
Thanks muchly!
AndyHere's what I've found that works.
In WGM in addition to the shortname you need to add the email address. In this case your username for domain1 and domain2 are the same.
andy
[email protected]
[email protected] -
What file do I need to upgrade SQLServer 2008 R2 on a virtual machine?
What file do I need to upgrade SQLServer 2008 R2 on a virtual machine?
Hi Jerry_TKO,
If I understand correctly, you want to update to SQL Server 2008 R2 from earlier version. If in this scenario, we should notice that not all versions and editions are supported to update to SQL Server 2008 R2. For more details about supported versions and
editions in SQL Server 2008 R2, please see:
http://msdn.microsoft.com/en-IN/library/ms143393(v=sql.105).aspx
For local installations, you must run Setup as an administrator. If you install SQL Server from a remote share, you must use a domain account that has read and execute permissions on the remote share. The following document about how to upgrade to SQL Server
2008 R2 is for your reference:
http://msdn.microsoft.com/en-IN/library/ms144267(v=sql.105).aspx
http://www.techrepublic.com/blog/10-things/10-tips-for-upgrading-to-sql-server-2008-r2/
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
LoadRunner SAPGUI Virtual Users Decline
I am trying to perform a Load Test on SAP R/3 using LoadRunner 9.5. I have 120 virtual users that I would like to run for an hour. I have distributed these 120 vusers over 6 scenarios on 5 load generators. The maximum number of virtual users that I have been able to run at one time is 114. The number then slowly declines over the next 40 minutes and stabilizes at 91 vusers (which run for the remaining hour). The messages I get from LoadRunner indicate that users have logged on and navigated to their assigned transaction code in SAP, but fail to perform the first step in that transaction code (this happens for ME21N, ME22N, ME23, FB10, F-43 which is all of the transaction codes that I am testing). I have worked with the Basis Group here to ensure that there are enough interactive dialog work processes, set each scenarios think time to random, initialize and start each vuser individually, and ensured that each load generator has enough RAM. The only thing left that I know to try is to increase the number of dialog processes per user. However, we cannot figure out the parameter name to do this. If anyone knows the name of this parameter or have any other suggestions, please let me know. Thanks!
Hello Andy,
We are having a similar problem, did you ever get an answer about this issue?
Thank you! -
Pure-ftpd - different permissions for virtual users?
I seem not to be able to find out how I could declare different permissions for different virtual users. In /etc/pure-ftpd.conf exists one line to declare permissions using
#umask file:folder
umask 133:133
umask matches the numbers to 'UserGroupOthers'.
Now that virtual ftp users belong to a real existing unix user / group, I wonder who is Users, Group and Others?
Users = virtual ftp user ?
Group = virtual ftp group ?
Others = anonymous visitors?
How can I tune it, so one virtual user can add files - f.e. to be used by a scan station - while others shall only read, having anonymous disabled?
This gives me a headache.Ok, let me think. What did I do?
I had different users. User X, Y and Z.
Then, I had a shared directory above their home directories.
While in the system, (not in pure-ftpd) I symlinked.
(Note that doing something in user X's directory, like ln -s ../shared didn't work---I had to do ln -s /usr/home/ftpuser/shared).
Then, I ~think I played with the permissions on shared and got what I wanted.
Then, after a few hours on this, they changed their minds about what they wanted, everyone was allowed to use shared, but different companies had to have their own directories, so I no longer have that config.
For what it's worth, you can take a quick look at my page
http://www.scottro.net/qnd/qnd-pureftpd.html
but I don't think it covers that situation.
HTH, though I doubt that it did. -
Is it possible upgrade SAP HANA DB without system/root user??
Hi All,
I am supporting banking client.
they are expecting to do SAP HANA upgrade(from OS or with HLM) .
even some time patch Kernels also.
my question is can we upgrade the SAP HANA system with SYSTEM user and root from OS(create different user which can support this process?) .
as per SAP HANA Master Update Guide.
You have user names and passwords for the following users
○<sid>adm user
○sapadm user
○S-user for the SAP Service Marketplace (SMP)●
but we need "SYSTEM" use to do upgrade process?.
with HLM: attaching info
Thanks
RavindarDear Rahul,
thank you for the response.
But... if we activate and install a demo license on the customer's server, how can we upgrade its old SAP B1 2007 database?
Do we have to download a last SBO 8.8 PL (i.e. PL 19) and run the upgrade wizard of this PL to upgrade COMMON db, SAP server, etc... and the old SBO 2007 cusomer db?
Can we directly upgrade old SBO 2007 db to SBO 8.8 PL 19 or we must before upgrade to an intermediate PL (i.e. PL 14) and later upgrade to PL 19?
Regards
Emanuele -
Vacation responses for SA-style virtual users
We've chosen to implement virtual users via Server Admin, rather thsn by manually editing files. We're now looking for a way to implement vacation responses. According to the 10.4 mail documentation, Sieve won't work with virtual users implemented this way. What are the alternatives to Sieve, specifically for vacation responses? Thanks to whomever can help.
I am sorry to disappoint you, but there is no easy
way of doing this. You'd be better off implementing
postfix style virtual aliases.
I was afraid you'd say that but thanks for the reply. -
[Solved] Pure-ftpd only virtual users
Dear arch-users
I'm using pureftpd from extra. I've created a lot of virtual users for my LAN, everything is working fine.
But it is possible for system users to log on an see their whole /home/users directory, with their user/pass combo. I've disabled it, by setting the minUID to a very high number, but I think their is a more decent solution for this problem.
So what is the best solution to only allow virtual-users to log on?
Last edited by YscO (2007-07-15 10:49:16)Solved the case
# If you want to enable PAM authentication, uncomment the following line
PAMAuthentication no
# If you want simple Unix (/etc/passwd) authentication, uncomment this
UnixAuthentication no -
Rejecting emails to unknown virtual users before filtering them?
hi
it appears that all emails to any virtual domain on my server gets "filtered" BEFORE it gets checked against valid users for that domain.
1. mail in
2. filtered
3. checked if valid
4. rejected (unknown)
Is there any way to have the validity check done before the filtering?
It would seem more economical if it worked like this...
1. mail in
2. checked if valid
3. rejected (unknown)
Regan
Message was edited by: reganyelcichI have used pterobyte's virtual mail set up in the past without a problem - and found that Apple has broken the postfix in 10.5 (as it says on the PDF that pterobyte is recommending.)
If you, like me, had already set up each user in WGM to have two shortnames (the second one - an email at virtual domain) then you only need to append the users to your "virtual" file in "/etc/postfix".
EG:
[email protected] shortname
do this for each virtual user, postmap the file and reload postfix. Then the mail server will accept the email addressed to your virtual user.
By All Means: read the PDF for more instructions. -
Anyone tried this on Arch?
http://www.minstrel.org.uk/papers/sftp/
Basically allowing chrooted virtual users SFTP access (no users/shell access). I thought of switching completely to SFTP from FTP/SSL, but don't want to add a user for each virtual host.
Last edited by phrozen (2013-08-24 15:54:51)To allow virtual user on the site, you need add a SAML authenticator provider to the security realm. From the log, I don’t see there is a SAML authenticator configured. This SAML authentication provider is used by SAMLIA to authenticate (in fact, it simply returns an authenticated identity) the virtual users.
You should also pay attention to the control flags of the newly added SAML authenticator and your existing DefaultAtn provider. For example, the control flags can be set like this:
SAML Authenticator - SUFFICIENT
DefaultAtn - SUFFICIENT
If DefaultAtn’s control flag is set to REQUIRED, “Virtual Users” will not work, too. -
[SOLVED] vsFTP and virtual users
EDIT: One should really install pam_pwdfile if he wants this to work (it's also in the wiki, but I'm blind)
Hey,
I'm trying to set up vsFTP with virtual users on my machine. Here is what I did:
# pacman -S vsftpd
# mkdir /etc/vsftpd
# htpasswd -cd /etc/vsftpd/.passwd ftpguest
*password*
# vi /etc/pam.d/vsftpd
auth required pam_pwdfile.so pwdfile /etc/vsftpd/.passwd
account required pam_permit.so
# useradd -d /storage/ftp virtual
# chown virtual:virtual /storage/ftp
My /etc/vsftpd.conf:
anonymous_enable=NO
pam_service_name=vsftpd
hide_ids=YES
local_enable=YES
dirmessage_enable=YES
xferlog_enable=YES
connect_from_port_20=YES
chroot_local_user=YES
local_root=/storage/ftp/$USER
user_sub_token=$USER
guest_enable=YES
guest_username=virtual
virtual_use_local_privs=YES
listen=YES
# mkdir /storage/ftp/ftpguest
# chown virtual:virtual /storage/ftp/ftpguest
# systemctl start vsftpd.service
Then I point my browser to ftp://myip and I get a prompt for username and password, but the problem is that the user I created (ftpguest) can't log in. What am I missing?
Thanks
Last edited by developej (2014-05-10 20:38:59)EDIT: One should really install pam_pwdfile if he wants this to work (it's also in the wiki, but I'm blind)
Hey,
I'm trying to set up vsFTP with virtual users on my machine. Here is what I did:
# pacman -S vsftpd
# mkdir /etc/vsftpd
# htpasswd -cd /etc/vsftpd/.passwd ftpguest
*password*
# vi /etc/pam.d/vsftpd
auth required pam_pwdfile.so pwdfile /etc/vsftpd/.passwd
account required pam_permit.so
# useradd -d /storage/ftp virtual
# chown virtual:virtual /storage/ftp
My /etc/vsftpd.conf:
anonymous_enable=NO
pam_service_name=vsftpd
hide_ids=YES
local_enable=YES
dirmessage_enable=YES
xferlog_enable=YES
connect_from_port_20=YES
chroot_local_user=YES
local_root=/storage/ftp/$USER
user_sub_token=$USER
guest_enable=YES
guest_username=virtual
virtual_use_local_privs=YES
listen=YES
# mkdir /storage/ftp/ftpguest
# chown virtual:virtual /storage/ftp/ftpguest
# systemctl start vsftpd.service
Then I point my browser to ftp://myip and I get a prompt for username and password, but the problem is that the user I created (ftpguest) can't log in. What am I missing?
Thanks
Last edited by developej (2014-05-10 20:38:59) -
Vsftpd and virtual users - SOLVED!
I have followed the wiki to build my vsftpd server, which works fine with local users
However, I wanted to build the server with virtual users, and I have made everything as described in the wiki,
but it doesn't work - I got a 530 error - Login incorrect.
I think it should be a problem with the password database file, but how to solve it?
here's my vsftpd.conf:
CODE:
listen=YES
anonymous_enable=NO
local_enable=YES
write_enable=YES
dirmessage_enable=YES
xferlog_enable=YES
connect_from_port_20=YES
xferlog_file=/var/log/vsftpd.log
#ftpd_banner=Welcome to blah FTP service.
chroot_local_user=YES
pam_service_name=ftp
guest_enable=YES
guest_username=virtual
virtual_use_local_privs=YES
Last edited by scar (2010-05-07 05:43:33)I don't think so :
cat /etc/passwd | grep virtual
virtual:x:1002:1002::/srv/ftp:/bin/bash
ls -l /srv/
drwxr-xr-x 2 virtual virtual 4096 máj 6 22.20 ftp
cat /etc/pam.d/ftp
auth required /lib/security/pam_userdb.so db=/etc/vsftpd_login
crypt=hash account required /lib/security/pam_userdb.so db=/etc/vsftpd_login crypt=hash -
[solved] VSFTPD + Virtual Users + different home directories
Hi All,
I've been trying to get VSFTPD setup to allow ftp access to some of my clients to access their web files. I've got VSFTPD up and running via the Wiki, but my virtual users can't log in. The only thing that I didn't do from the wiki was the "useradd virtual" as I didn't think it was needed. Also, the wiki only covers one directory for all users, I want to have each user to have access to their own web directory and nothing else. I think I may just have something a little off in my vsftpd file. Thanks!
vsftpd.conf
anonymous_enable=NO
local_enable=YES
write_enable=YES
dirmessage_enable=YES
xferlog_enable=YES
connect_from_port_20=YES
data_connection_timeout=120
listen=YES
virtual_use_local_privs=YES
pam_service_name=vsftpd
guest_enable=YES
user_sub_token=$USER
chroot_local_user=YES
hide_ids=YES
local_root=/srv/http/$USER
Last edited by GravityGripp (2009-05-14 17:36:19)GravityGripp wrote:
I don't think it's a directory permissions issue as it's telling me that my login is incorrect.
Here's my /etc/pam.d/ftp
auth required /lib/security/pam_userdb.so db=/etc/vsftpd_login crypt=hash
account required /lib/security/pam_userdb.so db=/etc/vsftpd_login crypt=hash
here's part of my auth.log also.
May 14 08:14:08 arthur vsftpd: pam_unix(vsftpd:auth): check pass; user unknown
May 14 08:14:08 arthur vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=current_user rhost=127.0.0.1
May 14 08:24:14 arthur vsftpd: pam_unix(vsftpd:auth): check pass; user unknown
May 14 08:24:14 arthur vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=current_user rhost=127.0.0.1
Hi GravityGripp,
as posted at the beginning of the thread in /etc/vsftpd.conf the 'pam_service_name' option is 'vsftpd' but here you are referencing /etc/pam.d/ftp as PAM service name but in vsftpd.conf you told to use 'vsftpd' as PAM service for auth.
About your need to define different directory for each ftp virtual user in my installation I allow ftp access to virtual users (defined in MySQL and auth via pam_mysql); to let users have access to their own ftp directory (with different auth read only / read-write) I used the user_config_dir option (see man vsftpd.conf).
Here an extract of my '/etc/vsftpd.conf':
# This powerful option allows the override of any config option specified
# in the manual page, on a per-user basis. Usage is simple, and is best
# illustrated with an example. If you set user_config_dir to be /etc/vsftpd_user_conf
# and then log on as the user "chris", then vsftpd will apply the settings
# in the file /etc/vsftpd_user_conf/chris for the duration of the session.
# Default: (none)
user_config_dir=/etc/vsftpd/vsftpd-user-conf
Each time I add a new ftp virtual user that need a personal ftp directory, under the dir '/etc/vsftpd/vsftpd-user-conf' I create a file named as the username where I define the personal ftp directory and the auth on it (RO or RW).
Example for user 'test' (file '/etc/vsftpd/vsftpd-user-conf/test'):
# vsftpd per-user basis config file (override of any config option specified
# in the vsftpd server config file)
# TEMPLATE
# User test - Description for user test
# Set local root
local_root=/srv/vsftpd/test
# Disable any form of FTP write command.
# Allowed values: YES/NO
write_enable=YES
Of course the dir must exist and have the right permissions to allow the user to connect.
Hope that this will be of help.
bye -
Ramp Down Virtual Users Feature in OLT 9.1
Hi,
I would like to know is there any ramp-down feature available in Oracle Load test tool similar to one available in HP LoadRunner?
I was able to find only ramp-up field entries in auto-pilot tab.
Please do let me know more info regarding it
Regards,
MaheshHi,
The Scenario pattern which you had mentioned is for ramping-up users which usually occurs during start of test execution which is readily available in autopilot tab. I mean ramping-down users which occurs at the end of test execution for defined period / goal.
At present, users are made to exit once they complete current iteration.
Is there any method available for graduall exit of virtual users?
Hope you understood my query.
Regards,
Mahesh
Maybe you are looking for
-
BPEL Workflow mail Notification content coming as attchment
Hi All, iam using actionable notifications in bpel workflow. iam getting mails properly but problem with payload part coming as attachment (as content.html).iam facing this problem only with Microsoft outlook. Here are server deatils. Server version:
-
I have just bought a MacBook Air OS X,10,7.2 from a friend but she has forgotten her password. any clues how to reset the password, please help. I can't personalise my MacBook until I reset it.
-
Javascript / Select List with Submit problems
I have a page (page 3) where I can either edit or create a record. If I am editing a record, the data loads on page 3 via a PL/SQL block. On page 3, I have a textual item with Javascript linked to it which pops up a new window. In the Javascript, I a
-
Approval process workflow for Customer XBO
Hi experts, We have a client requirement which asks for multilevel approval process for Accounts (when a new Account is created/ existing Account is changed). As per my knowledge, there is no standard approval process defined for Customer XBO as of n
-
Coping with system font change
Anyone know if theres any way to detect when the system font settings are changed?