Upgrade 10g to 11g

We are upgrading 10G to 11g on the same box(UNIX). I just wanted to what are files I have to take back up before Upgrade. Below are the files I know..Please let me know if any extra
RPP
Catalog
NQSconfig
Instanceconfig
I need to replace those files after installing 11g or edit according to 10G files...
Also wanted to know that, we should install obiee 7.9.6.1 on top of OBIEE 10g so does 7.9.6.1 installs in same folders where 10g installed or it creates separate folder? and
does it creates separate configuration files and catalog path for it it uses the existing 10g files?
Please reply with some suggestions.
Thanks in advance..

Thanks Bala for your useful links..also please let me know does 7.9.6.1 installation creates new path for its installation or it installed with 10g installed folder. I mean to ask 7.9.6.1 installation creates new configuration files and catalog?

Similar Messages

Oracle Database Upgradation 10g to 11g in HP unix

Oracle Database Upgradation 10g to 11g (standalone DB & ASM is implemented) in HP unix ?
Kindly furnish the good links and screen shot documents.
Edited by: user11937849 on Apr 9, 2012 4:04 AM

As part of the upgrade, you might research how new Oracle 11g features can help your system run better.
Your upgraded system can effectively start using extended statistics, a very powerful new 11g feature, immediately after the upgrade. I have a detailed blog post on how to do this with OEM - http://iiotzov.wordpress.com/2011/11/01/get-the-max-of-oracle-11gr2-right-from-the-start-create-relevant-extended-statistics-as-a-part-of-the-upgrade
Iordan Iotzov
http://iiotzov.wordpress.com/

NULL and Unspecified in Dashboard prompts after upgrading 10g to 11g OBIEE

Hi All,
We are working on OBI upgradation project from 10g to 11.1.1.6.5. We are facing one issue in Dashboard prompt level. If we can create Dashboard prompt on a column, its giving "NULL", "Unspecified" additionally. But, in 10g there are no extra values.
And the 10g, 11g instances are pointing to the same database and there are no NULL, Unspecified values in Database level.
Through some blogs and articles we found some solutions n are below.
To remove NULL:
-->Go to the Physical Column properties in Physical Layer and Disable the Nullable option by uncheck the box.
-->Go to the Database Features in Physical Layer and disable value to NULL_SUPPORTED.
-->Go to Edit Dashboard Prompt, in Choice List Values drop-down list select SQL Results.
To remove Unspecified:
-->Go to Edit Dashboard Prompt, in Choice List Values drop-down list select SQL Results, then write the SQL statements as columnname is not equals to "Unspecfied" ( In this way we can able to remove Null's also.)
-->Go to Content tab of LTS, in Where clause write an SQL query to restrict Unspecified values.
Note: CHeck with ETL, because if they maintains the Default value is Null when the Datatype is Character and they can maintain 9999 or #### if the datatype is Numeric. And check the Physical query and debug it carefully.
But, we have very big Repository and we have huge no.of Dashboard prompts. So, its not an easy thing to manage by using above solutions. Correct me if there are any mistakes in above.
Any ideas on this...?
Appreciate your help on this..!
Thanks in Advance,
Raghu Nagadasari

Hi Frnds,
As of now, i found the only solution for the above mentioned issue that how to avoid NULL in dashboard prompt level:
Go to the Physical Column properties in Physical Layer and Disable the Nullable option by uncheck the box.
We have done this manually for all tables.
Appreciate if u have any other ideas.!!
Thanks,
Raghu Nagadasari

Unable to login to presentation services after doing the upgrade 10g to 11g

Hi All,
I had a running instance of OBIEE 11g 11.1.1.6.0, my 11g rpd and webcatlog was working fine. Imp to note is that, I had configured external LDAP authenticator and wasn't using the weblogic embedded LDAP.
Now, today, I had to updrage 10g RPD and Webcatlog to 11g and merge into the my current 11g system. I ran the upgrade utitlity and it completed the upgrade successfully but now when I try to login into presentation services using the weblogic user, the presentation services gets hung. It doesn't even give me a message like "Invalid login or password" I DON't get any message but my Presentation services and RPD gets hung( when I try to open it online)
Also, I am trying to refresh the GUIDs after making the necessary changes in the config and instanceconfig.xml file i start the obi server and presentation server, it doesn't come up. So I am unable to refresh my GUIDs
What could be issue here? Do I need to fix an credential file? Please let me know.
Thanks,
Ronny

Ronny wrote:
Hi All,
I had a running instance of OBIEE 11g 11.1.1.6.0, my 11g rpd and webcatlog was working fine. Imp to note is that, I had configured external LDAP authenticator and wasn't using the weblogic embedded LDAP. Was LDAP access working fine before upgrading the 10g rpd and webcat?
Now, today, I had to updrage 10g RPD and Webcatlog to 11g and merge into the my current 11g system. I ran the upgrade utitlity and it completed the upgrade successfully but now when I try to login into presentation services using the weblogic user, the presentation services gets hung. It doesn't even give me a message like "Invalid login or password" I DON't get any message but my Presentation services and RPD gets hung( when I try to open it online)What do the logs say?
Also, I am trying to refresh the GUIDs after making the necessary changes in the config and instanceconfig.xml file i start the obi server and presentation server, it doesn't come up. So I am unable to refresh my GUIDsWhen you say doesn't come up, do you mean the services are down? If yes, what do the logs say about this?

Some questions regarding BPEL 10g to 11g migration.

Hi All
I have the following queries,
1.Is it mandatory to load xsd's , wsdl's , XREF , DVM into MDS ? or is it allright to keep them in file system ? currently we have a number of xsd's and wsdl's inside each of our 10g project > bpel subfolder. If they need to be deployed to MDS , then which files in 11g will need to be modified to use the new 'oramds:/apps/..... ' reference ?
do they get automatically loaded into MDS when a Composite is deployed on WLS or do they have to be deployed separately using ant-sca-deploy?
2. Should we modify fault-bindings.xml , DefaultPolicy.xml before or after upgrading the 10g project ? I understand that their references in composite.xml also need changing.
3.
a.Is it mandatory to modify the 10g dbadapter.rar contents (convert oc4j-ra.xml to weblogic-ra.xml ) and deploy the rar on 11g ?
b.or can we manually create data sources,outbound connection pools> jndi factories etc and redeploy the dbadapter on 11g so that its weblogic-ra.xml gets updated with the data sources,jndi that we manually created ?
want to know if 'a' and 'b' do the same thing ,so mutually exclusive OR both need to be done .
same question for JMSAdapter.rar, aqadapter.rar
4. When upgrading BPEL 10g to 11g using Jdeveloper, should all the data sources used by the project be created on Jdeveloper ?
5. Is it necessary to copy properties from 10g domain.xml t0 11g bpel-config.xml,soa-infra-config.xml ?
6. Should external webservices used by BPEL be up and running , while upgrading from 10g to 11g in jdeveloper , OR only during deployment to wls? if they are needed during upgrading how to link to them from jdeveloper ?
7. Do BPEL 11g projects needs to be deployed on WLS only as a SAR or are any other formats allowed ?
Thanks in anticipation

Hi,
Please find the links where you can find the most of the answers for your questions.
http://www.slideshare.net/oracle_imc_team/oracle-soa-suite-upgrade-10g-to-11g
Oracle soa 10g to 11g migration
Thaknks

Error in reports after upgrade from OBIEE 10g to 11g : [nQSError: 14025]

Hi All, We upgraded RPD and web catalog from OBIEE 10g to 11.1.1.5. I see the following error while running few reports.
Error: State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A
general error has occurred. [nQSError: 43113] Message returned from OBIS.
[nQSError: 14025] No fact table exists at the requested level of detail:
When I add an user under BIAdministrator Application role and login, all the reports work correctly.
I verified Oracle BUG fix (11850704) document and tried to make changes as suggested.
Please suggest me if this issue is related to 10g to 11g RPD upgrade or are we missing any privileges?
Also should I add every user to BIAdministrator role to avoid this issue?
Thanks in Advance

Hi,
First of all i am not familiar on linux box.
I tried in windows environment the rpd is deployed with out any errors.
But i ran the ua.bat file in the following path
\MWHOME\Oracle_BI1\bin\ua.bat.
while i am running in oracle_common\bin\ua.bat is not responding in my local system.
Please Mark if it helpful.
Thanks

Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version:       2.1.15
Revision:      5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home:   /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up:      supported
PSUs:          supported
Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base:    .
Patch source: SAP11203P_1312-20009978.zip
Link script:   ./link.mts<SID>ua.sh
Readmes:       <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name:     ora<SID>
Working dir:   /oracle/stage
System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free:     11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
   from           : /oracle/<SID>/11203/oraInst.loc
OPatch version    : 11.2.0.3.3
OUI version       : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
   Oracle Home dir. path does not exist in Central Inventory
   Oracle Home is a symbolic link
   Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APS

FOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Upgrade from discoverer 10g to 11g

Hi All,
While upgrading the Discoverer from 10g to 11g customer is getting the below error:
[2009-12-03T14:41:15.143-06:00] [Discoverer] [NOTIFICATION] [] [upgrade.Discoverer] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] Unknown preference: Administrator#ShowUserTypeChoice
[2009-12-03T14:41:15.143-06:00] [Discoverer] [ERROR] [] [upgrade.Discoverer] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] UPGCMP-01001: unexpected upgrade exception[[
java.lang.NullPointerException
at oracle.ias.upgrade.config.discoverer.DiscoPreferenceConfigUpgradeItem.upgradeOldPrefs(DiscoPreferenceConfigUpgradeItem.java:182)
at oracle.ias.upgrade.config.discoverer.DiscoPreferenceConfigUpgradeItem.doUpgrade(DiscoPreferenceConfigUpgradeItem.java:77)
at oracle.ias.upgrade.config.discoverer.DiscoConfigUpgrade.upgradeItem(DiscoConfigUpgrade.java:302)
at oracle.ias.upgrade.config.discoverer.DiscoConfigUpgrade.doUpgrade(DiscoConfigUpgrade.java:191)
at oracle.ias.upgrade.UpgradeSupport.doUpgrade(UpgradeSupport.java:1633)
at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:493)
[2009-12-03T14:41:15.144-06:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] upgrade exception occurred
[2009-12-03T14:41:15.144-06:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
[2009-12-03T14:41:15.144-06:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] UPGCMP-01001: unexpected upgrade exception
After commenting out the particular preference the upgrade fail with another preference, and finally the discooverer upgraded successfully.
So now the customer wants to know what could be the reason for the upgrade failure.
It it because of the preferences are not valid in Discoverer 11g?
Following is the list of preferences the customer commented out:
[Administrator]
###ShowUserTypeChoice
###DefaultUserTypeIsApps
###ExcelVersion
###[Crosstab] <-- Entire section
###Default Title
###Title
###Axis Label
###Cell XGridline
###Cell YGridline
###Axis Style
###[Table] <-- Entire section
###Default Title
###Title
###Cell XGridline
###Cell YGridline
###Row Headings
###Show Annotations
###GraphDataModel
Any help in this regarding is highly appreciated.
Thanks in advance.
Regards,
Padmanabh.

Hi Padmanabh
How are you doing the upgrade?
Personally, because you have to use a new weblogic server anyway I would install a clean 11g and then re-apply any preferences. With that done I would export the entire EUL from 10g and import it into the clean 11g. You'll be up and running in no time at all.
There is no need to upgrade the EUL as it is the same in both 10g R2 and 11g.
Best wishes
Michael

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

Getting error while upgrading rpd to 11g from 10g

Hello,
I have a rpd using obiee 10g.I want to open the same in obiee 11g,but getting error like need to run one file.
obieerpdmigrateutil.exe.
So i just run with -i,-u and -o option, that now i am getting this error->
The file 'DBFeatures.INI' is required for RPD migration and could not be located. Please ensure that ORACLE_INSTANCE is pointing to a valid instance directory.
Thanks

Hi akshara,
Firstly you need to upgrade from 10g to 11g,you need to run a .bat file from the path and follow some steps like collecting the artifact files like NQSconfig.ini,instanceconfig.xml,DBfeatures.ini with RPD and catalog to upgrade to 11g.
Here is the step by step process to upgrade and some artifact files manually given in step 2 of this blog http://prolynxuk.com/blog/?p=424
http://www.biconsultinggroup.com/images/VideoAlbum/OBIEE11gUpgrade11-4-10.pdf
(OR) standard documentation Start here http://download.oracle.com/docs/cd/E1457101/bi.htm_
If still the problem exists you manually update the DBfeature.ini file going to the specific location in 10g and copy them to 11g path.
hope helps you.
Cheers,
KK

Images after upgrade from 10g to 11g

We recently upgraded from 10g to 11g and all the images are broke in the dashboard.
Can anyone provide the steps needs to be done in order to fix the broken images?
Thanks.

Put image files at
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
If required
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Call them using fmap
Syntax: fmap:images/imagename.imageformat
for e.g: fmap:images/geograph.jpg
Pls mark correct/helpful if helps

Check list for upgrading from 10g to 11g when there is a schema replication

Hi
We are looking to upgrade one of our production database from 10g to 11g
Currently this database has one schema that is replicated to 2 other databases using Oracle streams.
The replication is excluing DDLs and excluding several other application tables.
What should I do pre and post the upgrade ?
should we remove the stream configuration all together and rebuild it after the upgrade ?
I was hoping that we can first upgrade the two target databases to 11g and then the source database, without impacting our streams configuration at all
Is that possible ?
Is there any documentation on the subject ?
thanks in advance
Orna

Pl post the OS versions of the source and target servers, along with exact (4-digit) versions of "10g" and "11g". I do not have any experience with streams, but the 11gR2 Upgrade Doc suggests that you upgrade the downstream target databases first before upgrading the source - http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/upgrade.htm#CIAFJJFC
HTH
Srini

.Database upgrade from 10g to 11g in Oracle EBS 11i

Hi,
An urgent help is needed.I am upgrading Oracle Database from 10g to 11g.My EBS is version 11i.So after upgrading my database
from 10g to 11g as sa sanity check what are the parameters we need to take care of the EBS.My point is will there be any Application level changes if the database
is upgraded?Wiill the Workflow and what other things we had to do the sanity check if its working properly?Any Concurent Program level changes be affected?
Thanks and Regards
Edited by: 918308 on May 10, 2013 7:52 PM

918308 wrote:
Hi,
Thanks for the info provided but i dont have the metalink id.Kindly can you provide me the link for the subjected docs so that i can relate.Any application level testing to be done?Concurrent Programs,Schedule Manager,Workflow etc.?We cannot post the contents of MOS docs since this violates Oracle support agreement policy.
You need to go a regular sanity check (i.e. submit concurrent programs, check workflow functionality, ..etc) -- E-Business Suite Diagnostics 11i Test Catalog [ID 179661.1]
Thanks,
Hussein

Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AM

HI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya

Error after upgrading BI Publisher report from 10g to 11g

Hi All,
I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
However whenever I try to access the reports in 11g after migration I get the following error:
oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
I have tried modifying the .xdo to include the following:
<dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
Any suggestions on how to rectify the error.
Sanchita Chakrabarty

Hi All,
I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
However whenever I try to access the reports in 11g after migration I get the following error:
oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
I have tried modifying the .xdo to include the following:
<dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
Any suggestions on how to rectify the error.
Sanchita Chakrabarty

Upgrade 10g to 11g

Similar Messages

Maybe you are looking for