Upgrade 2950 ios with cna fails

I'm trying to upgrade a 2950T from 12.1(14)EA1a to 1.12(22)EA10a.
I dl'd c2950-i6q4l2-tar.121-22.EA10a.tar.
In cna, went to Maintenance->Software Upgrade, selected the 2950, and pointed Upgrade Settings to the tar file.
Click Upgrade
It get to Reading the info file, and then
Software upgrade failed.
Any help appreciated.
sean

Actually CNA has its own embedded tftp server so you really should not have to use another tftp server. Even if space was the problem, CNA will explicitly give that error message and also provide a link to open a graphical flash management tool which will allow you to delete the unwanted files from the flash. If possible could you try that option also, I would like to know if there is any bug in CNA which forces you to use CLI and external TFTP server.

Similar Messages

  • Upgrading the IOS with bin file

    Hi Everyone,
    Need to confirm if ios has bin file only and no tar image then we can not use the archive command while using FTP to download the new ios.
    We can delete the old ios first and then upgrade the ios with copy ftp command right?
    Regards
    Mahesh

    I am asking about WS-C4503 with Supervisor II+TS.
    For chassis-based systems, all you need is copy the BIN file into the bootflash.
    Make sure you compare the MD5 hash value of the BIN file you got against the MD5 hash value found in the Cisco website.
    If it doesn't match, don't use it!
    Here's one way of checking:
    1.  Hover your curser above the filename and under the heading "MD5 Checksum" you get the value of "b6e127f2c74cfcae94e871376771e522" for the version you are going to use.
    2.  Copy the BIN file into your bootflash and run this command:  verify /md5 bootflash:cat4500-ipbasek9-mz.122-53.SG.bin b6e127f2c74cfcae94e871376771e522
    By the way, 12.2(53)SG?  You sure?  This version is classed as "Deferred" due to some bugs found.  

  • Upgrade to iOS 5.1 == FAIL

    I just updated my iPhone 4 from 5.0 to 5.1 and I am not a happy camper.  The upgrade process appeared to hang for over 5 minutes without any indication of progress being made either on the phone or in iTunes.  I ended up ejecting the phone and plugging it in again.  The phone restarted and was missing 70% of my apps.  It also didn't restore any of my passwords even though I was using an encrypted iPhone backup on my laptop so I wouldn't have to enter my passwords again.  Apple, this experience has totally sucked and sadly it could not come at a worse time as I'm at the hospital dealing with a family situation (yeah, I was an idiot to think this upgrade would actually be a trouble free experiece).  Y'all need to get serious about testing your software and maybe take a break from foisting more, unstable features on your customers (things no longer "just work" as people used to say about Apple products).

    Like I said, I waited at least 5 minutes looking for any sign that either iTunes or the phone was actually updating.  There was none.  This is poor software design/implementation, leaving the user to guess as to whether the update is actually occuring or it has hung and failed.
    Note, this is more to the story like the fact I downloaded the update successfully before I told iTunes to go ahead and update the phone.  I waited patiently as the upgrade appeared to be transfered to the phone. Then I saw some error message saying iTunes didn't have the password to my backup although I don't reacall seeing it ask me for it.  During all this my phone rebooted several times.  Finally iTunes appeared to have stopped updating the phone and the phone's display remained black and I waited for it to do anything for at least 5 minutes.  I ran Activity Monitor which showed iTunes to be completely idle during that time.  I've gone through several iPhone updates so I have some expectation of what is normal and what isn't.

  • Attempting to upgrade Switch IOS with Cisco Works 2.06

    I am running RME version 4.05 and am trying to test pushing IOS images on a 3560 48port PS switch running 128mb ram and 16mb flash. When I run an analysis on Cisco works it states I only have 127mb of ram and 15 mb of flash. Is this a known bug in Cisco works. I am concerned if I upgrade with the current ram I have it will not work.

    Which report are you running specifically? I have seen something like this before.

  • Upgrade to ios 5 failed with unknown error (-1)

    I was on ios 4.3.2 and when I tried to upgrade to ios 5 yesterday, I am getting unknown error(-1) while it is trying to install firmware. Currenlty my phone is in recovery mode and is detectable by iTiunes 10.5. But every time I try to restore the device to factory settings, it is giving the error as said before. Please help!
    Thanks,
    Sitaram.

    I have a good news for those who have their phones factory unlocked or have warranty from Apple. I went to a premium Apple Care center and they said that my phone has motherboard problem and that's the reason I have been seeing -1 error. So I have a got a phone to phone replacement.
    For ppl who have software unlocks, you need to wait for an ios 5 unlock for ur base band. Try following http://www.facebook.com/RedmondPie

  • After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

  • Since upgrading to iOs 5.1.1 and iTunes 10.6.1.7 my phone gets a sync failure message whenever I since thru the cable. I have no problem syncing with my iPad

    Since I upgraded to iOs 5.1.1 and iTunes 10.6.1.7 my phone will no longer sync with outlook or iCloud. I have no trouble with my iPad. I get a message "iPhone could not be synced because the sync session failed to start. Any suggestions?
    BW

    Is your iPad recognized by iTunes when connected to your computer via USB?
    If so, does Sync with this iPad over Wi-Fi remain selected under the Summary tab for your iPad sync preferences with iTunes?

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • HT4623 Recently I want to upgrade the IOS for my iphone 4 with my friend's help. Unfortunately, we are unable to do it. Don't understand why?

    Recently I wanted to upgrade the IOS for my iphone 4 following the guidelines closely with my friend's help. Unfortunately, we are unable to do so. I felt disappointed as I am looking forward to installing Apps, WeChat, Whats App, etc. I have bought it 2 years ago. I have read the FAQ, mine is the same as many other complaints as in the Settings-General, no "Software Update" appear but we have follow step by step but failed to do so.
    My friend suggested me to visit Apple Store in Kuala Lumpur, Malaysia. I just wonder if this problem can be solved.  Kindly advise.
    Thanking you in advance.
    Regards/Michelle Gee

    You are following the wrong guidelines. The Software Update option was not introduced until a later version. You need to connect to iTunes to update if you currently have iOS 4 or earlier.
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/updating- ios#itunes

  • Any possibility of upgrading 2950 switch IOS

    Hi,
    I would like to know if possible to upgrade my cisco 2950 switch IOS from Standard to Enhanced Image, As I notice from some one that it comes standard box with no uograde capabilities.
    Is that means as hardware upgrade or IOS Image Upgrade?
    Ankur : u have helped me before but I am still confused.
    thanks,

    The ability to run either the SI or EI features on the 2950 is hardware dependant. If you have a look at the release notes for the latest IOS there is a table about 2 pages in detailing the various 2950's available and whether they run the SI or EI features.
    The actual IOS software image is the same for both the EI & SI switches but only the EI features are available on the platforms that support it.
    The 2950-12, 2950-24, 2950SX-24, 2950SX-48-SI and 2950T-48-SI only have the SI features, it looks like all the others run the EI.
    HTH
    Andy

  • Iphone 4 since upgrade to ios 5.1.1 no longer works with made for itunes, iphone devices.

    Ever since I upgraded to IOS 5.1.1 my Iphone no longer works for playing music thorugh my Apline car unit, My Logic 3 clock radio, and a Next made for ipod device.
    I can sync through ITunes on the PC and can also play videos through the HDMI adapter.   My wifes iphone 4s and the kids  hand me down iphone 3s still play fine through these made for Itunes , Ipod , Iphone devices.
    I want to downgrade back to the prior IOS  I had before Apple encouraged me to install this bugged one.   How do I go about getting a legit non jailbroken prior IOS version installed on my Iphone?
    Is Apple aware of this issue , as I have seen blogs about this it is affecting other people?   Will this issue be resolved with ios 6?
    Can I get the beta ?
    Thanks,
    Douglas

    Agreed. Same thing here. Just bought a late model Alpine INE-S920Hd and it is all kinds of broken. I think this is happening because Apple shifted the music and video. Totally buggy. Bluetooth refuses to work properly, too. A2dp keeps stealing the audio from Pandora in the Alpine interface. The ipod controls dont work at all.

  • IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year

    IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year after the upgrade and some Apple staff blame this- but this started one year later after the iOS upgrade. Recently at the Apple Store in Vancouver an Apple staff reset my computer (erased everything and sent to iCloud to reset the iPad) and I hoped this would fix the problem. IPad Safari still crashes. Short of booking an appointment for taking it for repair to Apple technicians which will cost me money can anyone help me to fix this Safari crashing.

    Hi,
    You might have a 3rd party plugin that isn't compatible with Safari 4.0.4. Go here for help...
    Safari add-ons can cause performance issues or other situations
    If you are using a USB hub, try disconnecting and restarting with just your keyboard and mouse connected.
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    from the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Mac OS: Web Browser Quits Unexpectedly or Stops Responding
    Also, you could download and install the 10.5.8 combo update (PowerPC) available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    It contains fixes that might help. Then repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problems with your internet connection after upgrading to iOS 7.1.2

    After upgrading to iOS 7.1.2 on my iPad Retina display does not connect to the internet more. Recognizes the Wi-Fi network but can not connect to the internet. The same thing happened to my wife's iPhone 5s, while my had no problems ...

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for