Upgrade 4.6C to ECC 6.0 - Key figures missing in Treasury drill down report
Hello experts,
We have upgraded from SAP version 4.6C to ECC 6.0. Due to this fact, we have converted all the TR-TM and TR-LO master data and transaccional data, using TPM_MIGRATION.
However, when we start the tests in the system, we have noticed that, in the transaction TRM3, in ECC 6.0 we do not have the same key figures that we had in 4.6C and, consequently, we had 3 reports in the 4.6C version that we do not have in ECC 6.0.
When we access the t-code TRM3 in 4.6C we have 16 folders (16 key figures), and when we access the same t-code in ECC 6.0 we only have 10 folders (10 key figures). In order to create the missing reports we need the key figure "Securities: For a giving period". This key figure exists in the 4.6C but does not exist in the ECC 6.0.
Do you have any idea about how can we transport the reports from the system 4.6C to ECC 6.0, or, alternatively, how can you create these reports in ECC 6.0?
Thanks and regards,
Filipe Neves
Hi,
DId you run SPAU check in your ECC6 this will be addressed there.
Suresh
Similar Messages
-
List key figures in navigation panel of web report
Hi,
I have the standard navigation panel on the left side of my web report that shows a list of the characteristics in rows and a list of free characteristics. Under the heading columns I can see the point key figures.
Is there any possibility to list all the key figures that are included in the report so that I can use the drag and drop function for adding / removing key figures?Philipp,
Since Key figures is a structure, you cant see all the key figures under that area. What you can do is, you can restrict the keyfigures in the WAD report itself based upon your selection.
Hope it helps,
Assign Points
Thanks,
Gattu -
Subject: Displaying key figures without currency unit in BEX reports
Hello,
Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
Thanks for your reply.
Regards,
Nuran AdalHi Eugene,
thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
Best Regards,
Nuran -
How to add the required characterists and key figures to drill down report?
hi,
i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Change order of key figure is not working in Web report output (using WAD)
Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha. -
Key Figure missing in update rules
Hi All,
A Key figure is missing in Update rule of ODS & Infocube.
But it is listed in infosource ( comm. & transfer structure) of ODS.
Why it is so . Any suggestions.
infosource->ODS_>infocube.
Please help me.
Edited by: anand k on Mar 24, 2008 12:16 PMHi,
I will give the process that I followed (as you specified) now:
1. I deleted the Source System Assignment for the Infosource.
2. Next went to Source Systems. Right click on source system and replicate it.
3. Select the InfoSoucre and assign the Data Source.
4. Here I automatically got the Field(ZZMBGBTR).
5. I added the field in the Communication Structure. and then assigned the Transfer Rules. Next activated the InfoSource.NExt checked the InfoCube for the KeyFigure. That InfoObject ZQTY is available.
6. I activated the InfoCube. Right Click and select Create Update Rules. Still I didnt got that InfoObject.
Regards
Jay -
Key figure values vary each time the report is run by different users
Hi All,
We are facing a unique problem, here it goes :
Different users are getting different values for the same key figure, when executing the same query on the same selection conditions.Each time, user executes the report, he is getting varying values for the same key figure.Any idea's how to resolve this issue??
Thanks in Advance
BinduHi Bindu,
One reason might be due to authorizations as discussed earlier.
check how frequently is the cube getting refreshed.
This might also happen that if users are running the data at different times and there is a cube load in between.
check for this.
Cheers,
Srinath. -
How to rearrange key figures for every row in a report
Hi gurus,
I need help in rearranging the key figures values( product sales for A, B, and C ) in the columns for each sales division row D1,D2,D3 displaying keyfigures in the order of descending sales volume for each division. The order of key figures has to change for each row.
Is it possible through some user exits? Your help is appreciated.
ThanksHi,
I am extremely sorry for my earlier post. I am not too sure about that. I heard that we can do RRI on Infoobject.
Please look for other experts inputs. I apologise for that.
Regards,
Suman -
Key figures are not appearing in the reports ?
Hi Guys,
After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?Hi,
can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
Ingo -
Reorder key columns in "Use for Drill down" option
I have Product Detail as the leaf hierarchy level which has Product Id and Product Name are both selected as Logical Key.
When I drill down to this level in Answers, I see both Product Id and Product Name as expected. However I see Product Name as first column followed by Product Key.
Is there a way to change this default behaviour and make Product Key column as first column followed by Product Name?Hi Prassu,
I had done that and it did not help. I marked the ProductKey&Name column as Primary Key in both the Logical table as well as Dimension Hierarchy level.
I can drill down from Product Category to Product Type. But Product type does not come up as Hyperlink to be able to drill down to ProductKey&Name.
If I make the Product_Id as the primary key then drill down works fine. But with the derived logical column "ProductKey&Name" it does not work.
Any ideas? -
Key Figure getting summed up in the report
Hello BW Gurus,
Please help me out on this as soon as possible as I need to resolve this issue by the end of today.
I have a Custom Key Figure 'X' in one of my ODS and I am hardcoding it with a constant value, say 1000. When I load the data and check the ODS table, the Key Figure value is seen as 1000. But when I run a query on a multiprovider that contains this ODS and 2 other cubes ( these cubes don't have the Key Figure X), the value of the Key Figure in the output of the query is getting added up. I need to see exactly 1000 for the Custom Key Figure in the query output. Please tell me how to do this?
Your help will be greatly appreciated and equally reqarded with points.
Thank you in advance.
Best Regards,
Deepthi.Hi Deepthi,
By default, when you run a query, if the KF you are displaying is not displayed with all the characteristics it is compounded, you'll get the KF added.
an example
the ods has:
char 1 char 2 KF
1 1 1000
1 2 1000
if in the query you only include char 1, you'll get a result as follows:
char 1 KF
1 2000
Hope this helps.
Regards,
Diego -
Key Figures in the middle of the report
Hi
We have a req where we have 20 chars and 3 KFs ...We need to put this KFs in the middle of some chars...
eg:
char1, char2....Char10,KF1,KF2,KF3,Char11,Char12....Char20
Presently we are using a macro to satisfy this requriment. But changing the macro each time when we need updations is very complex and time consuming.
Can any one know how to put the KFs in the middle of Rows using Bex ?
RegardsHello,
Create 2 queries as follows:
1)
Char1
char2
KF1
KF2
2)
Char3
char4
KF1
KF2
Create WORKBOOK include query 2 in sheet2
Refer those Cell into sheet1 after the KF1 KF2
I guess it helps
Thanks,
KC. -
Mixing Key Figures and Characteristics in 2004s Table Display
In a 3.x query definition using table display, I could put a key figure in the middle of the characteristics. The results would be columns Char1, Char2, KF1, Char3, for example. The same query upgraded to 2004s insists on displaying the key figure at the end of the characteristics, even with the Query Properties / Data Formatting set to Tabular View (in BEx Analyzer).
Any ideas on how to keep the key figure in the middle of the characteristics?
Thanks.Hi,
New QD wont support table display. You need to use Report designer for this.
Thanks & Best Regards,
Rajani -
Table fields used for basic key figures in report writer/report painter
Does anyone know how I can find which <u>table field</u> is actually being used for SAP defined <b>basic key figures</b> in report writer report? For example, <b>HSL</b> is a basic key figure for income statement, library 0F1, report 0F-GUVV. It only shows data is coming from table GLFUNCT. How does the report writer program knows which fields to select? What is the logic behind the basic key figures?
Any advice is appreciated!!
MinamiI have now resolved this issue.
I had to manually update TablesT804B and T804F.
I've added entries to T804A in the past without the need to update T804B or T804F manually so it appears that the way these tables work together has changed following an upgrade or application of support packs.
Regards
Mel -
How can i display all the Coloumns (Key Figures) in the Report's same page
Hi All,
I am currently working on the BI 7.0 reporting. In the BEx Query Designer report, I am having 13 coloumns (7 Key figures and 6 Formulas) in the report. It is now displaying 10 coloumns in the First page of report. The other 3 coloumns can be seen by clicking on the next page. But the requirement is to see coloumns in the SAME PAGE.
Are there any settings OR any other thing in the Query Designer, which can enable me to see all the coloumns on SAME page. The users are not interested in scrolling next page for 3 coloumns.
Appreciates the Quick help/Response, please.
Regards
RamanaIn Web Application Designer, for the properties of your analysis webitem under the Paging category, change parameter 'Number of Data Columns Displayed at Once' (BLOCK_COLUMNS_SIZE) to 0. This will make all columns show instead of paginating as it is doing now.
Maybe you are looking for
-
I can log into my apple id, but it won't let me on Itunes
I'm studying abroad in two days and I wanted to update my ipod, mostly with a lot of apps since my flight is 9 hours. I tried logging into Itunes using my normal email and what I thought my password was. I wasn't sure on the password so I had my pass
-
I had an exchange account for work that synced to my iPhone 4 and Ipad. I left that job and after several months decided to remove the email account from my phone. This process also removed my contacts. The iPad still has the email and contacts.
-
[Solved] Clean shutdown/reboot/suspend,wakeup no longer possible.
No matter how I try to shut down my arch system, via systemctl poweroff, or through the GUI, or using /sbin/shutdown, my system will hang while shutting down. Forcing me to hold the power key down for a forced shutdown. This is the log from the last
-
Cache not working on 4.1 SP 13 w/SSL
Hi, we are currently running 4.1 SP 13 with SSL and I have noticed from perf-dump that the file cache isn't being utilized. I thought it was enabled by default ? Any Ideas ? I realize IPlanet 4.1 is being end of lifed, which is I why didn't bother ca
-
Trouble getting safari to open
Lately i have had prblems opening afari. If my computer has been on for a few hours and i go to open it it gives me some error message and doesnt open the program i have to restart it. has any one else had this problem and do you know what is wrong?