Upgrade 4.7 - ECC 6

Hi,
Pls. share the document on advantages of using ECC6 in specific with MM Module (purchasing). Now in our company we have upgraded SAP from 4.7 to ECC6.
Also, give us some guidelines to raise Media (channel) P.O in MM Module which is a combination of multiple channel with multiple rates.
Thanx
Kalaa

Hi Kalaa,
This information you can get form SAP marketplace and releted to other issue better you put this blog in
ERP - Logistics Materials Management (MM)
Regards,
Anil

Similar Messages

ITS is not working after the Upgrade to SAP ECC 6.0

Hi Folks
ITS is not working as it supposed to be after upgrading to SAP ECC 6.0
When I try to connect thru ITS i m getting HTTP 404 and HTTP 500 Errors
Can some one throw some ideas.
But web AS is running perfectly alright.
Thanks
Jay

Hi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty

CA-JVA on the upgrade 46C to ECC 6.0 (with HR module)

Hi experts,
We have now finished the upgarde but ne things make me feel not good:
In SAP Note 316815 - CA-JVA: Upgr. R/3 Enterprise / ECC- data transfer AFVC->AFVU
I think the transfer of those tables has not been worked fine.
And it seems that the implementation of this note does not woks at all. I mean to transfer of the Tables (AFVC to AFVU and VSAFVC_CN to VSAFVU_CN) before the upgrade and transfer them back after the upgrade.
Currently we have now both systems running: The Source system (the production system where the data comes from with release 4.6C) and the pilot system which has been upgraded in release ECC 6.0 (with source system data).
Is there any possibily to recover this step without to repeat the all upgrade (after a DB copy of course)?
Maybe export those tables?
Thanks in advance
HanseAtik

I have to close it.. without answer from anyone...

Want to upgrade GUI to ECC 6.0.

Hi,
I want to upgrade from GUI 6.40 to ECC 6.0.I just want to upgrade the GUI . and my R/3 is 4.7.

Hi Poonam,
You can upgrade to 7.1 without problems !
Read SAP Note 26417 to check that all hardware and software requirements.
Close all your duplicated Thread.
[want to upgrade GUI to ECC 6.0.|want to upgrade GUI to ECC 6.0.;
[upgration from 6.40 to ECC 6.0 GUI|upgration from 6.40 to ECC 6.0 GUI]
[SAP ECC 6.0 GUI|SAP ECC 6.0 GUI]
Please read [rules of engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
Use [SAP GUI Forum |SAP GUI; for this doubts types.
Lets make the SDN better we are responsible for this !
Regards.
Marcelo Ramos

Upgrade SAP from ECC 6.0 EHP4 to ECC 6.0 EHP7

Dear all,
We are using ECC 6 ERP 4 SP5 with oracle 10.2g and Netweaver 7.0 EHP1.
Other system release
CRM 7.0 SP5 & CRM JAVA Release – NW 701 SP3
BI Release – NW 701 SP5 BI CONT 7.04 & BI JAVA Release – NW 701 SP3
We are planning to upgrade ECC 6 ERP4 SP5 to ERP 6 ERP7 SP1, Could you please suggest for compatibility version for CRM & BI with ECC6 EHP7
And any document for EHP7 up gradation procedure and what is the impact or change made in system after upgrade from EHP4 to EHP7
Regards,
Ajay

Hello
The nightmare is going on... this point has been discussed a year ago (Re: Comapatability between EHP7 and SAP Netweaver BI 7.0 EHP1) and the conclusion was that you only need to upgrade HUB satellite systems... and a BW system is not an HUB.
The only possible issue would be if the java stack of the BW system is used directly by the ECC system.
Did not find any information on the necessity to upgrade the CRM, so I think you should keep it as it is.
This are even getting worst because sometime sap support (OSS) are not able to provide clear answers (Interoperability btw ERP 6.0 EhP7 and SAP NW/BW 7.0)
Best regards
Strategy beyond SAP Business Suite 7 Innovations 2011 - Landscape Governance - SCN Wiki
1388258 - Version Interoperability within the SAP Business Suite
In order to use the new JAVA EE 5 capabilities and benefit from the improvements of SAP NW 7.3 the version interoperability range has been moved upwards for SAP Business Suite core applications with Release to Customer (RTC) from 2013 onwards.
This means that SAP NetWeaver Systems 7.30 or higher are required if SAP Business Suite applications are based on or operating with those central Systems (Enterprise Portal, Business Warehouse, Process Integration).
Customers wishing to utilize SAP Business Suite applications with RTC from 2013 onwards, that require one of these central SAP NetWeaver Systems, will have to upgrade their central NetWeaver Systems to 7.30 or higher before upgrading e.g. to SAP Enhancement Package 7 for SAP ERP 6.0.

Old Appraisal System (SAP R/3 4.7 ITS) upgrade to SAP ECC 6.0, Ehp4

Hello experts,
We are currently on SAP R/3 4.7 (using ITS) and will be upgrading to ECC 6.0, Ehp4 (using Netweaver Portal). This upgrade will be purely technical, no changes to existing talent modules.
Our employee performance appraisals are currently accessed via ITS using the Old Appraisal System. Can you tell me if it is even possible to link the old appraisal system to the NW portal?
If yes, what kind of changes are required here? Which iviews will I need to activate?
All of your advice is greatly appreciated. Thank you in advance.
Dina

hi,
THe old appraisal system runs on ITS , true .
In the new ECC 6 , there is a built in ITS , which should allow you to still run the old services . But it makes sense to explore the newer functionalites offered in EHP4.
Regards
sameer

Changes in BW Extractors after upgrade (R3 to ECC)

Hi,
My client is upgrading from R3 4.6c to ECC 6. I want to know what are all the changes in BW extractors in ECC. This will help me understand if our current applcations will be impacted due to these changes. Also, we will know what are the changes we have to make in BW after the upgrade to ECC.
Also, please mention where I can get the list of BW extractors for a given plug-In.
Thanks
Rekha

Hi Rekha,
We are currently doing the R/3 upgrade from 4.6 to ECC 6.0 and I found that there is no significant impact on the extractors. Currently we found that "Assignment" field format has been changed in BSEG table but that field is not getting used in our reports.
In our system we don't have much LO extraction, so I don't know if there is any changes on that front.
You can refer the below thread for more information,
[Upgrade R/3 (4.6C > ECC 6.0): Impact BW (3.5);
Regards,
Durgesh.

UPGRADE STEPS FROM ECC 5.0 TO ECC 6.00

Hi,
Can anyone of you help me in the upgrade steps (Process) from ECC 5.0 to ECC 6.0.
Thanks in Advance.
Ram

Hello Ramesh ,
Apart from this also download and have a look on look the Upgrade guide .
URL to Download :
www.thespot4sap.com/upgrade_guide_v2.pdf
Regards ,
Santosh Karadkar

Best upgrade path for ECC 6.0

Hello,
We've been stuck on the base ECC 6.0 release for quite a while. There hasn't been management support for the time/resources necessary to implement and test any upgrades. We also have a lot of local modifications to SAP supplied programs that we're planning on phasing out so that we keep closer to standard. This is one of the main reasons we haven't been able to upgrade because of the effort involved in changing processes back to standard. There was also an unwillingness on specific parts of the user base to change their processes. We're now in a position where business and reporting requirements are going to force a system upgrade. We also need run a unicode conversion from non-unicode at the same time.
As we're starting the planning process we're unsure of the best path to allow us to implement future upgrades as necessary. I see that EHP 7 runs on a basis version of Netweaver 7.40. Is upgrading to an EHP pack for ECC 6 better than upgrading directly to 7.4? Can the unicode conversion be done at the same time?
I looked over previous discussions in upgrades but haven't found something that seems to match what we're looking to do.
Thanks.

Good Day
As you have an ECC 6.0 system then you need to do an EHP update on the system.
The latest is EHP7. EHP 7 is based on SAP NetWeaver 7.4 so when you update the system to EHP 7 you will be on NetWeaver 7.4
The most important thing here is that you need to have a supported OS and DB for EHP7 installation. From EHP6 there is a need to have a higher version of OS and DB.
Check PAM for the supported OS and DB combination.
https://service.sap.com/sap/support/pam?hash=pvnr%3D01200314690900005013%26pt%3Dt%257CPLTFRM%26ainstnr%3D012003146949000…
Regarding Unicode conversion you may read this.
2033243 - End of non-Unicode Support: Release Details
If you want to do the Unicode conversion then you should follow CUUC.
Regards
RB

How to upgrade Kernal for ECC 5.0?

Hi,
I have installed a new SAP ECC 5.0 system. The release verion shows the current Release as 6.4 and Patch Level 43. Now I want to apply the latest patch on Kernal.
Can any one please provide me the steps for
1). How to proceed with the Kernal upgarde?
2). Which all files to be downloaded from Service Marketplace before proceeding
with the upgrade?
3). Any configurations/back up to be done before starting with upgradation?
4). Any document for the upgradation of Kernal.?
5). How to confirm whether the upgradation has been done sucessfully?
Please reply ASAP!
Thanks in advance.
Regards,
Manish

Hi,
I have found that Patch level 175 is available for thesefiles. Whether to go for that or 155 only.
Also there are other files like for enServer, enqserver, dw etc. They are needed or not.
The path I am using to download the files is :
Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 04 -> Entry by Component -> Application Server ABAP -> SAP KERNEL 6.40 32-BIT UNICODE -> #Database independent -> Windows Server on IA32 32bit
Please confirm.
Regards,
Manish

Changes in functional and technical level on upgrading from SAP ECC 5.0 to ECC 6

Hi Friends,
Need help with the below mentioned questions
What will be the changes in Functional level while upgrading for ecc 5.0 to ecc 6.0?
What will be the changes in Technical level both Abap and Basis?
What will be the changes in Server Hardware level in Upgrading of Servers (Solution Manger,IDES,Dev Server,Prod Server)?
What is change in SAP License level?
Total cost of Project development and Support .
please help me as I need to answer some body .
Thanks in Advance

It seems that you have a combined upgrade - ABAP + Java in your system - is that right? If yes, did you start the Java upgrade in parallel?
Markus

Upgrade 46C to ECC 6.0 with CU&UC

hi,
For the CU&UC, do i need first to upgrade to web as 6.20 and the upgrade to ECC 6.0.
If somebody know what to do?
thaks,
Sergio

Hi,
CU&UC as name itself suggest that it is a combine Upgrade & Unicode conversion that menas we need to Upgrade the system from 4.6C to ECC 600 and then do the Unicode conversion.
The broad level steps will be
Upgrade Preparation
Unicode Conversion Preparation
Upgarede execution
Unicode Conversion
Post Upgrade & Unicode Migration activities.
The Manual for Combined Upgrade & Unicode conversion is available on service marketplace, use the same for more details
Hope this will help you, do revert if yoiu need any more details on the same.
Best Regards,
Sachin.

Upgrade 4.6C - ECC 5.0 stuck in phase parmvnt_shd

Performing an upgrade from SAP 4.6C to ECC 5.0 the upgrade stucks in phase PARMVNT_SHD with the same symptom as described in sapnet note 198879, however this upgrade runs on an iseries, with os level V5R3. Here is the exact message I get in the tp log :
3 ETP379Xactivating Nametab "/SAPDMC/LSCPROGS":
2 ETP399   >> Name of inactive nametab to read : DDXTT?
2 ETP399   >> Format of inactive nametab to read: 5.0
3 ETP399 ntab export with reset DBTABPOS
2 ETP399 -
DB-ROLLBACK() -
2AETP344 sqlerror "-901" occured at location "LOC095"    (object "DDXTT?")
3 ETP379Xactivating Nametab "/SAPDMC/LSCRULE":
3 ETP399 ntab export with reset DBTABPOS
2 ETP399 -
DB-ROLLBACK() -
and so on, for all objects. TP keeps on repeating these steps, so the logfile keeps growing and the upgrade stays on the same point.
Please advise,
Kind regards,
Robert Visser
[email protected]
certified technical consultant

Hi Robert,
as you see SQL0901, the problem will ly in the DB2/400. You should have a look at the joblog of this process and find out the messages before the generic message SQL0901. This should put light into the shadow ...
See you,
Volker

Upgradation project to ECC 6

Hi all
Can anyone please provide some guidance, if possible also send some documentation, which I can follow to work on a upgradation project.
Currently system is 4.7, and they want to upgrade to ECC 6.
What are the steps involved, what would be my role as FICO consultant, in such upgradation, because i have never worked on a upgradation project.
Any input will be highly appreciated.
Krishna

http://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/releasenotes
http://service.sap.com/upgrade
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
https://websmp104.sap-ag.de/instguides
SAP Business Suite App->SAP ERP -> SAP ERP 6.0

Upgrade 46C to ECC 6 0 STEP BY STEP ---Developing

Now the upgrade has reached the "POST Upgrade Steps" which means Its open to the SECURITY ( Authorizations ) to come in.
1. First I have doing the SU25.
Question -->Do I need to run (1) on SU25 .
Answer:NO this is only for IInstallation of PFCG. for upgrading to higher releases only Steps 2 down are needed.
Please correct me if I am wrong or have additional information which you want to share

> The only way they are going to see what changes have been made is from the change logs for the roles. You can look at tables which show differences in the proposal values but they are worthless unless they map 100% to the only changes shown in the roles.
I think this is what GG is looking for, but as you mention there are both system and audit skill pre-requisites.
The auditor needs to know and have confidendence in the before concept if roles are to be upgraded via SU25.
The auditor needs to have knowledge about the release being upgraded to, and which changes would be required (and opportunities made use of to use new features... potentially also redesigning existing roles in new ones...)
And then map the expected changes (that is their job) to the actual ones (the tools which Alex has mentioned).
My recommendation would be to use the "you navigate, I drive" approach before giving the auditor access to do a comparison and get lost on their own, potentially.
That way you know what the auditor is capable of, and the auditor has a better understanding of your upgrade strategy.
For major release upgrades, redesigning role concepts are an opportunity which should not be missed, and I think a reasonable and skilled auditor should understand that.
> A potential alternative would be to set up an RFC connection to the system which your pre-upgrade roles were backed up to and then run a comparison between each role in the backup and the current system.
That could be usefull as well for a snapshot of expected changes between the "real roles" and the upgraded roles in a sandbox, all else (and coding) assumed the same between the release upgrades (which is of course not the case...) It would be helpfull to find transactions for which the coding has officially changed or are now officially the leading transactions for the proposal indicators.
I have not tried that either - but I think it would be usefull information for the functional folks and developers (including role developers).
Cheers,
Julius

Upgrade 46C to ECC 6 0 - Preparation steps

1. Before the Upgrade is started what are the PRE - Upgrade steps related to security?
for example should any tables be dwn loaded ? etc etc..I will be doing the upgrade in two weeks just wanted to prepare the the docs as well as the system before.
I hope to give a ths forum a complete security upgrade seanario.
Thanks

Hello George,
Please use the following link to know more about the upgrade 46C to ECC6.0
http://www.sap.com/community/showdetail.epx?itemID=10015
Hope it helps.
Cheers,
Satish.

Upgrade 4.7 - ECC 6

Similar Messages

Maybe you are looking for