Upgrade 46C to ECC 6 0 - Preparation steps

1. Before the Upgrade is started what are the PRE - Upgrade steps related to security?
for example should any tables be dwn loaded ? etc etc..I will be doing the upgrade in two weeks just wanted to prepare the the docs as well as the system before.
I hope to give a ths forum a complete security upgrade seanario.
Thanks

Hello George,
Please use the following link to know more about the upgrade 46C to ECC6.0
http://www.sap.com/community/showdetail.epx?itemID=10015
Hope it helps.
Cheers,
Satish.

Similar Messages

CA-JVA on the upgrade 46C to ECC 6.0 (with HR module)

Hi experts,
We have now finished the upgarde but ne things make me feel not good:
In SAP Note 316815 - CA-JVA: Upgr. R/3 Enterprise / ECC- data transfer AFVC->AFVU
I think the transfer of those tables has not been worked fine.
And it seems that the implementation of this note does not woks at all. I mean to transfer of the Tables (AFVC to AFVU and VSAFVC_CN to VSAFVU_CN) before the upgrade and transfer them back after the upgrade.
Currently we have now both systems running: The Source system (the production system where the data comes from with release 4.6C) and the pilot system which has been upgraded in release ECC 6.0 (with source system data).
Is there any possibily to recover this step without to repeat the all upgrade (after a DB copy of course)?
Maybe export those tables?
Thanks in advance
HanseAtik

I have to close it.. without answer from anyone...

Upgrade 46C to ECC 6 0 STEP BY STEP ---Developing

Now the upgrade has reached the "POST Upgrade Steps" which means Its open to the SECURITY ( Authorizations ) to come in.
1. First I have doing the SU25.
Question -->Do I need to run (1) on SU25 .
Answer:NO this is only for IInstallation of PFCG. for upgrading to higher releases only Steps 2 down are needed.
Please correct me if I am wrong or have additional information which you want to share

> The only way they are going to see what changes have been made is from the change logs for the roles. You can look at tables which show differences in the proposal values but they are worthless unless they map 100% to the only changes shown in the roles.
I think this is what GG is looking for, but as you mention there are both system and audit skill pre-requisites.
The auditor needs to know and have confidendence in the before concept if roles are to be upgraded via SU25.
The auditor needs to have knowledge about the release being upgraded to, and which changes would be required (and opportunities made use of to use new features... potentially also redesigning existing roles in new ones...)
And then map the expected changes (that is their job) to the actual ones (the tools which Alex has mentioned).
My recommendation would be to use the "you navigate, I drive" approach before giving the auditor access to do a comparison and get lost on their own, potentially.
That way you know what the auditor is capable of, and the auditor has a better understanding of your upgrade strategy.
For major release upgrades, redesigning role concepts are an opportunity which should not be missed, and I think a reasonable and skilled auditor should understand that.
> A potential alternative would be to set up an RFC connection to the system which your pre-upgrade roles were backed up to and then run a comparison between each role in the backup and the current system.
That could be usefull as well for a snapshot of expected changes between the "real roles" and the upgraded roles in a sandbox, all else (and coding) assumed the same between the release upgrades (which is of course not the case...) It would be helpfull to find transactions for which the coding has officially changed or are now officially the leading transactions for the proposal indicators.
I have not tried that either - but I think it would be usefull information for the functional folks and developers (including role developers).
Cheers,
Julius

Upgrade 46C to ECC 6.0 with CU&UC

hi,
For the CU&UC, do i need first to upgrade to web as 6.20 and the upgrade to ECC 6.0.
If somebody know what to do?
thaks,
Sergio

Hi,
CU&UC as name itself suggest that it is a combine Upgrade & Unicode conversion that menas we need to Upgrade the system from 4.6C to ECC 600 and then do the Unicode conversion.
The broad level steps will be
Upgrade Preparation
Unicode Conversion Preparation
Upgarede execution
Unicode Conversion
Post Upgrade & Unicode Migration activities.
The Manual for Combined Upgrade & Unicode conversion is available on service marketplace, use the same for more details
Hope this will help you, do revert if yoiu need any more details on the same.
Best Regards,
Sachin.

Upgrade from 46C to ECC 6

Hello:
We are planning to begin technical upgrade in SAP, from 46C to ECC 6.0.
I have the next landscape:
-Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8
-New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10 already installed.
We want to install SAP ECC 6.0 in NS and get the data from CS.
Which is the best and easy way to do this? SAP manuals are quite generic. I have two ideas but I would like your comments:
1st way
1. Homogeneous copy of CS
2. I install ECC 6.0 in NS with the option to import data generated in 1. (is this possible??)
3. Finish installation and aditional configurations. I begin to test.
2nd way
1. Homogeneous copy of CS
2. I install 4.6C in NS with the option to import data generated in step 1. (Not sure if 4.6C will accept Solaris 10 and Oracle 10.2).
3. I suppose I don't need to reconfigure after installation and import.
4. I do necessary tests. At this point I would have 46C on the new versions of Solaris and Oracle.
5. I begin the SAP upgrade to ECC 6.0 in NS
6. .... The remaining processes indicated by SAP
Thanks for your attention.

> -Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8
> -New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10 already installed.
The database software is usually installed during the run of sapinst/R3setup, not before. You may run into problems if you pre-install Oracle (environment, necessary database options not set etc.)
The easiest way would be do to a system copy.
I would then
- install the latest Oracle instantclient
- install the latest kernel 46D_EX2 kernel
Markus

Upgrading from 46C to ECC 7.0

Guys,
My company is going to upgrade R/3 46C to ECC 7.0 later this year. From the development (ABAP programs, any ABAP objects) standpoint, any suggestions on preparation, or what can be done in our current 46C environment to ensure a smooth transition from 46C to ECC (unicode, obsolete ABAP syntax, etc)? Also any idea and recommendation on planning the upgrade, as well as things to watch out for are welcome.
Thanks,
Yan.

First ECC 7.0 does not exist, so you will be upgrading to ECC 6.0. And yes, you can start by doing a start for any calls to WS_UPLOAD and WS_DOWNLOAD. You will need to change these calls to call the GUI_UPLOAD or GUI_DOWLOAD function modules.
Other syntax issues will need to be handled after the upgrade, like using the ECODING extension on all OPEN DATASET statements.
Regards,
Rich Heilman

Short dump in MIGO and VL02N when upgrading from 46C to ECC 6.0

Hello,
We are doing an upgrade from R/3 46C to ECC 6.0 and we face a shortdump in trx MIGO (upon saving the document).
DBIF_RSQL_INVALID_REQUEST
a BKPF_INSERT in program SAPLF005
The same shortdump happens when doing a Goods Issue on the SD side.
Looking at the program, this is not modyfied so I guess it is a standard SAP error.
OSS however, up to know did not respond to my message and there does not seem to be a SAP Note on this issue!
Anyone had this problem before. How did they solve it.
Thanks for any reply,
Aart

Posted in another forum

Error in upgrade from 46c to ecc 6.0

hi experts,
we are facing an error at the time of upgrade from 46c to ecc 6.0 in the phase JOB_RSUPGAIMEXE.
did anyone face this error anytime during upgrade on windows plotform?
Please let us know your comments..
regards
raghu

Hello,
Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
Thanks
N.P.C

Upgrade from 46c to ECC 6.0 new components support package

dear experts,
we have upgraded our test system from 46C to ECC 6.0
before upgrade in 46C we have support packages components
SAP_BASIS 46C
SAP_ABAP 46C
SAP_APPL 46C
SAP_HR
PI 2003_1_46C
SAP_NOTES 46C
ST-A/PI 01B_R3_46C
ST-PI 2005_1_46C
after upgrade to ECC 6.0 we found
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_BW 700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
EA-IPPE 400 0003
EA-HR 600 0003
EA-GLTRADE 600 0003
EA-PS 600 0003
EA-RETAIL 600 0003
EA-FINSERV 600 0003
EA-DFPS 600 0003
EA-APPL 600 0003
FINBASIS 600 0003
ECC-DIMP 600 0003
ERECRUIT 600 0003
FI-CA 600 0003
FI-CAX 600 0003
INSURANCE 600 0003
IS-CWM 600 0003
IS-H 600 0003
IS-M 600 0003
IS-OIL 600 0003
IS-PS-CA 600 0003
IS-UT 600 0003
LSOFE 600 0003
SEM-BW 600 0003
we are planning to apply SPS 06. Is it mandatory we have to apply
all the support packages in SPS 06.
we are confused as we dont use IS-OIL,EA-,ERECUIT,INSURANCE,FI-
please suggest which support packages we have apply relating to the
functionality we have in 46C
regards
Raghu

Hi,
you have to apply the same type of packages as before.
All other are included in ECC, but if you don't use the special services and applications (for example IS Oil or stuff like this), there is no need to apply all these packages.
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
should be enough
Regards
Timm

Need ECC 6.0 EHP 5 Fresh installation Manually prepared Step by step Guide

Hi Expert,
I am new for Installations of SAP systems presently am working in support project. I am going to install ECC 6.0 EHP 5 with
Linux/oracle fresh installation on 12/01/2012.
Can any one help me to do the installation.
If you have manually prepared Step by step document please mail me
my mail id is :sprasad.k7@gmail
THANKS IN ADVANCE.
Regards,
Sivaprasad.
Edited by: kurapati siva on Jan 7, 2012 10:09 PM

Srikishan D wrote:
Hi,
>
> Check out the steps mentioned in the official SAP Document:
>
> http://service.sap.com/instguides -> SAP Business Suite Apps -> SAP ERP 6.0 -> SAP EhP EhP5
> Installation guide for your OS/DB
> First Steps for EhP5 for SAP ERP 6.0
> How to Install EhP5 for ERP 6.0
>
> - An EhP5 Ready installation only installs a system at Netweaver 7.0 EhP2 and ERP Components at 600 level.
> - You need a Solution Manager 7.01 at Stack 26 to generate a stack.xml for EhP5 Installation.
> - Check which technical usage types you need to install as part of Eh5.
>
EHP5 installation comes with Central application component i.e. SAP_APPL and EA-APPL on 605 version. Its different from EHP4 installation where all ERP components comes on 600 release.
Thanks
Sunny

/usr/sap/trans (data/cofiles) is empty before upgrading 46C- ECC60

After homogeneous system copy from a 46C production system (PRO) to an upgrade test server (DES), and after the execution of SE06, the DES import queue is empty (/usr/sap/trans/cofiles and /usr/sap/trans/data directories doe not contain files).
Some objects were changed in PRO along the years using change requests, and these changes are reflected in DES also, but DES does not have those change requests in the queue. However DES is ready to upggrade.
I would like to know if I can expect problems during the upgrade of DES, from 46C to ECC 6.0 due to the absence of those change requests. I think the upgrade process could ignore all changes and additions made.
What do think?
Thanks for your help.

Hi,
Since you copy your production system to test system then all changes that you have done over the time will be there in the system. Data file and cofile are not required. You can start with your upgrade preparations.
Thanks
Sunny

Repeating the Preparation steps for unicode

Hi,
We are planning to convert our system to unicode soon and run the Preparation steps in the QAS system. But, if we run the Preparation steps and some of the objects are modified before the end of the Prepare,how much of it is needing to be re-done before the actual downtime? We are not advocating a freeze of transports on the system during the preparation. What steps may need to be redone and how much of the total effort would that be?

Hi,
in case of a single code page system I do not see many problems here (compared e.g. to an Upgrade) .
For new customer objects, you should set the language flag.
Changes of tables should be treated with RADCUCNT right before the export (as stated in the Unicode conversion guide).
However if you have many changes and these were not included in your tests - then unexpected problems could occur.
This is the reason why SAP recommends to minimize changes during the conversion project.
To be more precise: Recommendation is to do a Sandbox conversion (copy of PRD system). The status of this SBX system should be as near as possible to the status of the PRD system right before the conversion.
Best regards,
Nils Buerckel
SAP AG
Edited by: Nils Buerckel on Nov 11, 2010 9:20 AM

ITS is not working after the Upgrade to SAP ECC 6.0

Hi Folks
ITS is not working as it supposed to be after upgrading to SAP ECC 6.0
When I try to connect thru ITS i m getting HTTP 404 and HTTP 500 Errors
Can some one throw some ideas.
But web AS is running perfectly alright.
Thanks
Jay

Hi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty

Hi , PLS Send me the ecc 6.0 intalation steps

Hi , PLS Send me the ecc 6.0 intalation steps with screen shots.
pls send me any one as soon as possible.
my id is vksaini at gmail. com
any kind of help is highly appricated.

Vikas - I assume you want installation steps for the preview installation?
The installation steps are delivered with the downloaded installation files. Check the documentation directory.

What are the ECC 6.0 installation steps?

Hi,
what are the ECC 6.0 installation steps?
pre
installation
post

Hi,
Find the installation guide at
service.sap.com/instguides > SAP Business solution > ERP6.0
It will cover every part of installation.
Regards,
Debasis.

Upgrade 46C to ECC 6 0 - Preparation steps

Similar Messages

Maybe you are looking for