Upgrade 9.2.0.8 32bit se to 9.2.0.8 64 ee

HI All,
I would like to ask if it is possible to upgrade 9.2.0.8 32 bit se to 9.2.0.8 64 ee. If yes, what are the steps to do it?

@Srini Chavali-Oracle
     Release: 5.9
     Kernel architecture: sun4u
     Application architecture: sparc
     Hardware provider: Sun_Microsystems
     Domain:
     Kernel version: SunOS 5.9 Generic 118558-35 Oct 2006
     OpenWindows version:
     Solaris X11 Version 6.6.1 11 July 2006
@Srini Chavali-Oracle
@Top.Gun
     Business is currently looking for a new vendor to replace our product which will include upgrade to 11g, our CIO just wants to utilize the ee/dataguard licenses that we have already acquired but is not yet used.
@user13542525
    Thanks for the guide, I will have a look at it later

Similar Messages

Upgrade Oracle 9.2 in 32bits(WIN2K) into Oracle 10G in 64bits(WIN2K)

Hi,
I want to upgrade Oracle 9.2 in 32bits(WIN2K) into Oracle 10G in 64bits(WIN2K) all in 4.6D.
I have installed:
the Oracle 10.2.0.4.0
a central instance with the template CENTRAL.R3S
i started to install the database instance on the target system
with the R3Setup template DBR3CP.R3S
I try to apply the note 932722, I find myself in the same procedure
point 6) c).
The following error message:
Tue Jan 26 21:52:45 2010 - Database service to be upgraded:
        Host = tirudev04
        Port = 1527
        Service = SAPServiceDEV
        ORACLE_HOME = E: \ oracle \ DEV \ 102
Error: Database connection failed to
sys / manager @ / / tirudev04: 1527/SAPServiceDEV
Can you give me some help?
Thank you.

>Service = SAPServiceDEV
This is probably the problem. you have to specify the Oracle network service name of the database you want to upgrade.
SAPServiceDEV is an Windows account name under which the SAP System is started.
Service = DEV will probably do the job.
regards
Peter

Upgrade from Win 7 Pro 32bit pre embeded OEM pack to Win 7 Pro 64bit

Hello,
I have recently purchased 15 Dell OptiPlex Desktops with pre installed Windows 7 Pro 32bit Operating System.
Now, i wish to upgrade it to Windows 7 Pro 64bit but not able to do so as i do not have the product key. As I understand the key for 32bit & 64bit is same but the problem is that I cannot locate my current pre embedded OEM license key as it is been embedded
in to the motherboard as informed to me by OEM (Dell).
Please suggest a solution as on how can I upgrade my current 32bit OS to 64bit in this scenario.
Awaiting your response in anticipation.

This for is for Windows Embedded POSReady. A better place to post your question is on he Windows forum site:
http://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winforms
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Upgrade 10.2.0.4 32bit to 11.2.0.2 64bit on Windows 2008 64bit problem

I am on a remote machine logged into the console as a user in the admin group with 10.2.0.4 32bit up and running. I installed 11.2.0.4 64 bit, choosing to do software only. I then ran DBUA to upgrade the DB. In the Progress box, Perform Pre Upgrade and Upgrading Oracle Server are successful. However, on Upgrading JServer JAVA Virtual Machine, it runs for a while and then I get ORA-03113: end-of-file on communication channel. This is a test box in preparation for beginning to install on our customers. Has anyone else run into this?

Hi,
I am on a remote machine logged into the console as a user in the admin group with 10.2.0.4 32bit up and running. I installed 11.2.0.4 64 bit, choosing to do software only. I then ran DBUA to upgrade the DB. In the Progress box, Perform Pre Upgrade and Upgrading Oracle Server are successful. However, on Upgrading JServer JAVA Virtual Machine, it runs for a while and then I get ORA-03113: end-of-file on communication channel. This is a test box in preparation for beginning to install on our customers. Has anyone else run into this?I suggest you to log a service request with oracle.
Refer link: http://myracle.wordpress.com/2009/04/09/issues-with-java-virtual-machine/
Hope helps.
Regards,
X A H E E R

Upgrading Thinkpad R61 from Vista-32Bit to Win7-64Bit_stuck & need Help

I'm in the mids of upgrading my ThinkPad R61
I've added memory to 4Gb and a newer drive 320Gb
I've purchased the Win7 Home Premium Vista to Win7 upgrade (CDs).
Can I upgrade this R61 laptop to Win 7-64Bit OS?
Thus far, I cannot boot from the Win7 Upgrade CD
So I tried with a USB external DVD. I got past the Boot stage, however, it's prompting me for a CD/DVD driver before it can continue to load.
I am sensing that I will be prompted multiple times for additional drivers (perhaps 64Bit) before I ever complete the upgrade process.
What is the quickest & easiest path to upgrade my laptop to Win7-64Bit. (At least, to the point where I can boot from the upgraded drive).
My ThinkPad R61 Model = #8932CTO

Thanks GMAC-R60
My intention was to actualy do a clean install to Win7 -64Bit.
Perhaps it has everything to do with using an upgrade (32-Bit & 64-Bit) version CD of Win7 from Vista?
When I tried to upgrade to 64Bit, it eventually took me to a screen prompting for a CD/DVD driver to continue the upgrade. I suspected it was looking for a 64bit driver (likely the SATA controller), so I opted out thinking it will be lloking for more drivers through the upgrade process.
I then successfully upgraded it to Win7 - 32Bit version.
However, I would like to take advantage of the 64Bit speed & useability of the additional RA I have inside the laptiop.
I noticed that Lenovo have a listing of Win7 64Bit drivers under their Support section. If one was to download and expand them them to a folder, would it be possible to essentialy upgrade to 64Bit?
Or, perhaps get CD copy from Lenovo with all the required files & drivers?

Upgrade oracle 8i (32bit) to oracle 10g (64bit)

Hi,
I have to upgrade oracle from Oracle 8i (32bit) to oracle 10g (64bit).
Do you have a note to help me ?
Are there problems ?
Thank you,
Philippe

Bharatwaj,
We have ECC 5 running on HP Unix.
I am planning to upgrade from 9.2.0.7 to 10.2.0.2.
I read that you have already done this in your environment.
can you please share with me
- steps that you have followed
- Issues you have faced if any during upgrade and after upgrade
- Issues / Risks with application after 10g upgarde
Thank you very much in advance.
Best Wishes,
Rajasekaran G.

Upgrade Vista 32bit to Windows 64bit. What happens to my preinstalled MSOffice 2007

Hi,
I want to upgrade from Vista Home Premium 32bit to Windows 7 Home Premium 64bit, so I will have to do a new installation. Now I got MSOffice 2007 pre-installed with Vista on my T61p, and got the MSOffice Trail DVD.
Now I would like to know if I do a Windows7 installation, will I be able to reinstall MSOffice with the Trail DVD, and use the same Reg ID and Product ID that I'm using on Vista at the moment?? I sure hope I don't have to buy MSOffice again for the upgraded OS!
Thanks for the help.

What do you mean by Reg ID and Product ID? I hope you do not mean the Product ID in "About Microsoft Office XXXX" where it says 'This product is licensed to: xxxx Product ID: xxxxx or the Registry key ID cause if you do that will not work!
You will need a valid Product Key to make the trial into a full registered version. This key will have 5 sets of 5 numbers and/or alphabets in each set.
Like this:
ABC34-KERK5-23KJK-AK68D-AKRBK
If that is what you have then no problems.
Robert

Hp probook 4530s drivers for windows 7 ultimate 32bit

I am running Windows 7 Professional 64bit on my hp probook 4530s notebook, and I am going to upgrade to Windows 7 Ultimate 32bit. but I will need the drivers for the new windows, because i will have to format the laptop to change from 64 bit to 32 bit.
So where can i download all the drivers.
kind regards
Jean Meintjes

Hi, Jean:
Below is the link to the support and driver page for your notebook:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5060882&lang=en&cc=us...
Just use the W7 Pro 32 bit drivers for your W7 Ultimate installation.
They will work just fine.
Best regards,
Paul

Upgrading from vista to Windows 7

I am trying to upgrade from Vista Home Premium (32bit) to Windows 7 Premium (32bit), how can I get the required drivers for it? Specifically the nvidia nforce 10/100 mbps ethernet (32bit) updated driver.
This question was solved.
View Solution.

Duplicate post. Please see your other post for suggestions.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Upgrade Win7 Home x64 to Win7 Professional

Hi there
Just purchased the z830 which comes with Windows 7 Home Premium (64bit) and just wondering can i upgrade it to Win7 Pro (32bit)? I have the Win7 Pro CD already but just want to see if there will be any hardware issue and software issue? and how do i create a recovery partition if i upgrade it to Win 7 Pro.
Thanks People
David

Hello David
You can upgrade Win7 and you can also make clean Pro installation. It is your decision but before you do anything please create recovery DVD using preinstalled Toshiba recovery disc creator.
It is very important. It can happen that after OS upgrade you will not be able to start recovery image from HDD. You will not have access anymore.
With recovery DVD in the hand the situation is completely different. Anytime you want you can use this disc for Win7 installation and have factory settings again.
Generally speaking all offered drivers, tools and utilities on Toshiba download page are the same for home premium or professional version so if you will make decision to install clean version you can download all stuff from - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Please let us know what do you want to do exactly and if you need some assistance you are welcome.

Problem using/upgrading camera raw

I have Windows 7/64 bit. When I first installed Photoshop CS5, I immediately upgraded Camera Raw. Later, after opening Bridge from Photoshop, I found I could not get Bridge to open a file in Camera Raw. I knew that Raw was working because I had previously opened an Adobe lesson file using it. When I attempted to open one of my files I received an error message: "Bridge's parent application is not active". I have since learned that Bridge will only open a file in Raw, if Bridge is initiated from the 32bit version of Photoshop (or if the 32bit version of Photoshop is open). OK, I thought I'd solved the problem, ie open both the 32bit and 64bit versions of photoshop and then access to Raw is fine. However, I then decided to upgrade Camera Raw in the 32bit version of Photoshop. When I then attempted to open what I thought was the 32bit version, I got the 64bit version instead and, of course, lost the access to Raw.
I've only learned this after uninstalling and re-installing several times. I'm now not willing to upgrade Camera Raw for fear of losing access to it again. This is not a very satisfactory situation.
Does anyone understand what is going on, and whether there is a work-around?
Thanks
Grahame M

There's nothing wrong here. You only all too quickly updated it. You need to run PS at least once, and open an image via ACR (the one that it installs by default), so it configures itself. Once that has happened, updates should go smoothly without all the higgledy-piggledy. For more specific guidance ask in the ACR and Photoshop forums.
Mylenium

How to make LR 2.4 open to CS4 32bit instead of 64bit

I recently upgraded my OS from Vista 32bit to Vista 64bit. I had no problems installing the CS4 Production bundle as well as Lightroom 2.4. A bit of a hitch installing a couple of plugin in CS4 64bit so I need to use 32bit, which is a bummer, but still acceptable. What i'm trying to figure out is, how do I let LR 2.4 "Edit in Photoshop" and more importantly "Open as Smart Object" in Photoshop CS4 32bit instead of 64bit by default?

I believe the way to do this is to start the 32-bit Photoshop binary before you call "Edit in PS". Lightroom will automatically use the open version and not start the 64-bit version if the other is running.

Pavilion HDX 9480eg (same as HDX9300) Upgrade Ram to 8GB?

Hi to everyone,
i'm a proud owner of the hp pavilion hdx 9480eg ..."laptop" (it's 2 years old now) and it came with 4GB (2x2GB) 2Rx8PC2 5300S (which means DDR2-SD 667 ram i guess...is that correct?).
Now i like to upgrade the system with 2x4GB = 8GB RAM and get Win7 64bit as OS (otherwise this would be useless...).
The current OS is windows vista 32 home and i don't know wheather there will be any problems with the 64-bit OS and the RAM...especially concerning the BIOS-compatibility with 8GB RAM. Searching for days now and only thing i found out is, that HP does not support win7 upgrade on my laptop because it's to old...
some details to my laptop hardware:
Official name of System in Vista: HP Pavilion HDX9300 Notebook PC (It was selled unter the name "HDX9480eg wich means, that it hase some aditional aspects as for ex. bigger sized hdd than the usual hdx9300)
Intel core 2 Duo CPU T8300 @ 2,40Ghz
currently 4GB RAM
GPU: nVidea GeForce8800m GTS
Windows 7 Upgrade advisor tells me, that 32bit win7 is possible and win7 64 bit also possible... only some unimportant software which i don't use anyway could get into some trouble... there are no problems listet that stand in relation to hardwaredrivers...
Can anyone help me and tell me, what is possible and what is not possible? The bigges uncertainty is the BIOS... will it be compatible with 8GB Ram?

Thanks a lot for your quick answer! i just have one more questions before i mark this question as compleatly answered:
From what information/experience (own experience or from other users) can you verify the compability of my dragon-laptop and win7 64bit? I need to be 100% shure, that there will be no bigger problems... because i also need the so called laptop for work...
do you think, i will notice a real difference between win vista 32 and win7 64 on my machine (for ex. in video-editing with photoshop or premiere cs4?)
THX 4 your help

Wanting to upgrade my system

I have a
945GCT-HM (Livermore)Motherboard
I would like to upgrade the cpu to one that will better handle my mmorpg games that I play.
This motherboard says it will only run with 2gb ram
I have installed 4gb and it is running with the 4gb.
I'm also thinking of getting a higher wattage power source. I'm just not sure what the MOB will handle.
Also I have upgraded from vista to win7 32bit
Can I go to Win7 64bit?

Thank you for providing the Min and Max requirements for the games that you play.
Any of the Duo (2) core processors listed will be much better than your single core. However, you may have difficulty finding them. They are getting to be older versions. I am not certain that you will see a lot of performance improvement with any of them. Since the Max requirement states a Quad core processor is recommended.
Instead of building a computer, why not try one of the new HP gaming computers. You will be able to play any game with one of them. Here is the model that I am using. The only thing that I added was a Samsung 840 EVO SSD, 500 GB. I can play the games that I have at full settings with no problems. I may add a newer video card later. Here are all of the models available. It is not only fast, but it looks great, also.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

After windows 10 upgrade, HP Laserjet MFP M1005 not working

I upgraded my windows from win7 32bit SP1 to windows 10. But just after upgradation my printer stopped working. It is working on windows 10 32bit on my other system but not on my current system. I tried uninstalling the drivers, removing the device, updating the driver, adding the device again (as a local printer in windows) , but unfortunately I was unable to do any of the following. Please help

WIndows 10 uploaded, and the Printer HP LaserJet M1005 MPF is being frustrating. It tries to print the same page multiple times but does not print at all. It is continually in Paused mode. We have uninstalled and reinstalled. No success. How do I get it from Paused mode. I tried to open the manuel for the programme but no success. All I get is the front page.Then I get a rather unhelpful request to do a survey on how helpful the site has been. If anyone can help me I would be grateful.

Upgrade 9.2.0.8 32bit se to 9.2.0.8 64 ee

Similar Messages

Maybe you are looking for