Upgrade a Domain Controller running Windows Server 2012 Datacenter Eval
Hello,
because I couldn't wait for Server 2012 to show up on Dreamspark Premium I installed the Datacenter evaluation version after I found this blog
post telling me, I could simply enter my key when I get it to upgrade to the full version.
After entering the command I get notified that "Changing this Windows edition is not supported online for a domain controller.".
The TechNet article for upgrading evaluation versions states the following:
"If the server is a domain controller, see http://technet.microsoft.com/library/hh472160.aspx for important steps to follow before proceeding."
and taking me to an article for installing/uninstalling ADDS without further comments.
Simply typing "slui 3" and entering my key states that I have to enter an eval key.
My question is: Is there a painless way to upgrade my 2012 DC without losing my AD config?
Regards,
Hans
Hi,
Please refer to the following Microsoft TechNet article to confirm if the steps of converting to full retail version are correct.
Evaluation Versions and Upgrade Options for Windows Server 2012
http://technet.microsoft.com/en-us/library/jj574204.aspx
If the warning persists, it means Windows Server 2012 Domain Controller does not support such convert. If so, please install another Windows Server 2012 full retail version or
convert to full retail version and then promote it to an additional Domain Controller for this domain. After that, transfer FSMOs to this new Domain Controller and demote the original Domain Controller.
Regards,
Arthur Li
TechNet Community Support
Similar Messages
-
Adding second domain controller in Windows server 2012 R2
Hello, our primary domain controller is currently on a machine that has Windows Server 2008 R2 Standard. We are planning to setup a second domain controller as a failover to our primary domain controller. My question is, can we have a secondary domain
controller on a Windows Server 2012 R2 even if our primary domain controller is on a machine that has Windows Server 2008 R2?I think I found the answer to my question.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx
"In Windows Server 2012, Adprep.exe is integrated into the AD DS installation process and runs automatically as needed. For example, when you install the first domain controller that runs Windows Server 2012 into an existing domain and forest, then adprep
/forestprep and adprep /domainprep automatically run and report the results of the operations.
Some organizations may prefer to run Adprep.exe separately in advance of an AD DS installation. For this reason, Adprep.exe is also included in the \Support\Adprep folder of the operating system disk.
In Windows Server 2012, there is only one 64-bit version of Adprep.exe. It can be run remotely from any server that runs a 64-bit version of Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012. The computer where you run it can be either
domain-joined or in a workgroup.
The version of Adprep.exe in Windows Server 2012 includes new syntax and parameter options in order to run it remotely. For more information, see
Adprep."
For more information about the objects and containers that are created when the schema is extended to support Windows Server 2012, see
Windows Server 2012: Changes to Adprep.exe. -
I have racked my brain and done everything that I know to do for about two weeks now. I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
profiles. It keeps telling me that the roaming profile could not be loaded because of a slow connection. These are workstations that are connected directly to the switch that the DC is connected to. I have tried multiple connections regarding
the layout (DC into the router, router into the switch). The router is a Cisco RV220W. I have two VLANS, one for public and one for private domain. The Private VLAN has DHCP turned off since I am providing it through the DC. I currently
have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port). I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller. The DC can see
the internet fine and the workstations can connect to the shared folders on the server. I can retrieve files by just using the computer name or FQDN. The DC is also running DNS and DHCP. The DNS has the _msdcs setup from when I installed
the active directory role. I have attempted to assign static IP addresses to the workstations:
IP: 10.0.0.80
Subnet: 255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS: 10.0.0.12
I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
The server is assigned:
IP: 10.0.0.12
Subnet: 255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS: 10.0.0.12
The DNS entries have forwarders that forward to my ISP DNS servers for lookup
I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
I've lost my patience with this project and am sinking fast. Can someone please offer some advice as to what I've done wrong? I've created this exact scenario at work many times but, I've never done it with Windows Server 2012. Is this
possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV? I am going to attempt to work on it some more tomorrow when I get over there. I think there may be an issue with the SR-IOV not being enabled on the machine
through the Dell Bios. Would the SR-IOV really cause the workstations to report a slow connection? When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct. I don't
have "ignore slow connections" or any of those GPO's set. I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem. Any help that someone can offer, I am more than willing
to listen. If you need more information, please ask.
Thanks,
JaySo, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now. -
¿Is it possible to upgrade from SCCM 2012 a domain controller in Windows Server 2008 R2 TO 2012 R2?
Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Upgrading windows server 2003 domain controller to windows server 2008
Hello friedns :
We have a company with about 2000 users , and two windows server 2003 domain controllers , one of them acts as a primary domain controller , and the other acts as secondary domain controller , all the FSMO s are on the primary DC ,we have decided to upgrade all of our servers from windows server 2003 to windows server 2008 , the first step is to upgrade the domain controllers to windows server 2008 , our domain controllers are so sensitive and has to be active 24 hours a day , i have stress upgrading it to windows server 2008 , what is the best solution to upgrade it with no risk ?
( i have an opinion but i am not sure and i dont have any guide about it , i want to install a windows server 2008 and promote it as an additional domain controller to the windows server 2003 DC and the transfer all the FSMOs to it , and then promote the first domain controller !!! is that possible ? if yes , is there any guide about it? )
If there is a guide available for it please let me know . (Specially if there is a tip & trick)
thank you guys.
Network is my LOVEHi,
This TechNet online article might be helpful for you.
How to Upgrade Domain Controllers to Windows Server 2008 or Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ee522994(WS.10).aspx
For your convenience, I have list some general steps for your reference.
Since the following operation have potential damage to Active Directory database, it is highly suggested that you'd better perform a full backup of Active Directory (System State) firstly. Also it is better to test the following procedure in a similar lab environment first.
General Steps:
=============
1. Verify the new server's TCP/IP configuration has been pointed to the current DNS server.
2. Make the new server become a member server of the current Windows Server 2003 domain first.
3. Upgrade the Windows Server 2003 forest schema to Windows Server 2008 schema with the "adprep /forestprep" command on old server.
Please run the "adprep.exe /forestprep" command from the Windows Server 2008 installation disk on the schema master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP\adprep.exe /forestprep
4. Upgrade the Windows 2003 domain schema with the "adprep /domainprep" command on old server.
Please run the "adprep.exe /domainprep" command from the Windows Server 2008 installation disk on the infrastructure master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP \adprep.exe /domainprep
5. Insert Windows Server 2008 Installation Disc in the new server.
6. Run "dcpromo" on new server to promote it as an additional domain controller in existing Windows 2003 domain, afterwards you may verify the installation of Active Directory.
Please refer to:
How to Verify an Active Directory Installation in Windows Server 2003
http://support.microsoft.com/kb/816106
7. Verify the new server's TCP/IP configuration has been pointed to current DNS server.
8. Enable Global Catalog on new server and manually Check Replication Topology and afterwards manually trigger replication (Replicate Now) to synchronize Active Directory database between 2 replicas.
Please note: It will some time to replicate GC between DC, please wait some time with patience.
9. Disable Global Catalog on the old DC.
10. Transfer all the FSMO roles from the old DC to the new DC.
Please refer to:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
11. Verify that the old DNS Server Zone type is Active Directory-Integrated. If not, please refer to:
How To: Convert DNS Primary Server to Active Directory Integrated
http://support.microsoft.com/kb/816101
Note: Active Directory Integrated-Zone is available only if DNS server is a domain controller.
12. Install DNS component on new server and configure it as a new DNS Server (Active Directory Integrated-Zone is preferred). All the DNS configuration should be replicated to the new DNS server with Active Directory Replication.
13. Make all the clients change TCP/IP configuration to point to new server as DNS.
14. You may configure TCP/IP on all the clients, or adjust DHCP scope settings to make them use the new DNS server.
Please note: It is a good practice to make the old DC offline for several days and check whether everything works normally with the new server online. If so, you may let the old DC online and run DCPROMO to demote it.
Hope it helps.
Regards,
Wilson Jia
This posting is provided "AS IS" with no warranties, and confers no rights. -
Hi,
What is the proper way to demote a Windows 2003 Domain Controller running SQL Server 2008 WorkGroup Edition?
I will be migrating AD from Win 2003 to 2012....
Thanks in advanced.Running SQL on a domain controller is highly not recommended for performance reasons and for complexities it introduces in the management of both systems (You are already facing this situation now).
I would recommend proceeding like the following before demoting your domain controller:
Install a new SQL server on a member server
Migrate your databases to the new SQL server
Once done, you can safely demote your DC.
More if you ask them here: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=sqlserver
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password -
I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support -
Upgrading Windows Server 2012 Essential Eval to Windows Server 2012 R2 Retail
I need to upgrade from Windows Server 2012 Essential Eval version to Windows Server 2012 R2 Retail. What would be the easiest way to upgrade if license $$ is not an issue? The Server is a DC. Would the following works:
1. Upgrade from Windows Server 2012 Essential Eval to Windows Server 2012 Essential Retail
2. Do a conversion from Windows Server 2012 Essential Retail to Windows Server 2012 Standard Retail (I suppose this just require several command line to enable the 2012 Standard)
3. Do an in-place upgrade from Windows Server 2012 Standard to Windows Server 2012 R2 Standard (there is no need to do migration, am I right?)
Thanks.I just did a simulation using Hyper V. It seems that I'm able to do the upgrade sequence as described but I'm not sure whether there are any side effect that not yet surface out. Here is the details steps that I took:
1. Under Windows Server 2012 Essential Eval
convert the Windows Server Essential 2012 Eval to Windows Server Standard 2012 using the following command in an elevated command prompot
dism /online /set-edition:ServerStandard /productkey:xxxxx-xxxxx-xxxxx-xxxxx-xxxxx /accepteula
press "y" and return to restart as prompted
the productkey could be retail key or the KMS client keys (just for installation not for activiation)
2. After reboot, the system become Windows Server 2012 Standard
using admin account to login
add admin account to the Enterprise Admins group and Schema Admins group if not already done so, logout and login again
mount the Windows Server 2012 R2 Standard disk in, say, drive d:
in an elevated command prompt, go the following:
cd d:\support\adprep
.\adprep.exe /forestprep
.\adprep.exe /domainprep
double click on d: in explore to run the Windows Server 2012 R2 Standard setup
follow the instruction to complete the in-place upgrade from Windos Server 2012 to Windows Server 2012 R2
3. After reboot into Windows Server 2012 R2 Standard, go to the charms bar, select setting -> server info, it will mention the server is not activated, click on Activate Windows and key in the Windows Server 2012 R2 Standard retail key -
Exchange Server 2013 and Remote Access VPN on a single server running Windows Server 2012?
Just by way of background, I have been installing and administering network servers, e-mail systems, VPN servers, and the like for many years. However, my involvement with Exchange and Windows Server has been mostly on the forensics and data recovery
level, or as a (sophisticated) user. I have never tried to deploy either from scratch before. My deployment experiences have been mostly with Linux in recent years, and with small private or personal "servers" running such cutting edge
software as Windows XP back when it was new. And even NetWare once.
When a client asked me if I could set up a server for his business, running Exchange Server (since they really want Outlook with all of its bells and whistles to work, particularly calendars) and providing VPN access for a shared file store, I figured it
could not be too difficult given that its a small business, with only a few users, and nothing sophisticated in the way of requirements. For reasons that don't bear explaining here, he was not willing to use a vendor hosting Exchange services or cloud
storage. There is no internal network behind the server; it is intended to be a stand-alone server, hanging off a static IP address on the Internet, providing the entirely mobile work-force of about 10 people with Exchange-hosted e-mail for their computers
and phones, a secure file store, and not much else. If Exchange didn't need it, I would not need to install Active Directory, for example. We have no direct need for its services.
So I did the research and it appears, more by implication than outright assertion, that I should be able to run Windows Server 2012 with Exchange Server 2013 on a server that also hosts Remote Access (VPN only) and does nothing else. And it appears
I ought to be able to do it without virtualizing any of it. However, I have spent the last three or four days fighting one mysterious issue after another. I had Remote Access VPN working and fairly stable very quickly (although it takes a very
long time to become available after the server boots), and it has mostly remained reliable throughout although at times while installing Exchange it seems to have dropped out on me. But I've always been able to get it back after scrounging through the
logs to find out what is bothering it. I have occasionally, for a few minutes at a time, had Exchange Server willing to do everything it should do (although not always everything at the same time). At one point I even received a number of e-mails
on my BlackBerry that had been sent to my test account on the Exchange Server, and was able to send an e-mail from my BlackBerry to an outside account.
But then Exchange Server just stopped. There are messages stuck in the queues, among other issues, but the Exchange Administration Center refuses now to display anything (after I enter my Administrator password, I just get a blank screen, whether on
the server or remotely).
So, I am trying to avoid bothering all of you any more than I have to, but let me just begin with the basic question posed in the title: Can I run Exchange Server (and therefore Active Directory and all of its components) and Remote Access (VPN only) on
a single Windows Server 2012 server? And if so, do I have to run virtual machines (which will require adding more memory to the server, since I did not plan for it when I purchased it)? If it can be done, can anyone provide any pointers on what
the pitfalls are that may be causing my problems? I am happy to provide whatever additional information anyone might like to help figure it out.
Thanks!An old thread but I ran into this issue and thought I share my solution since I ran into the same issue. Configuring VPN removes the HTTPS 443 binding on the Default Site in IIS for some strange reason; just go and editing the bindings, add HTTPS and things
should be back to normal. -
Can SCVMM 2012 R2 Operate Without Problems If Hyper-V Environment Is Running Windows Server 2012?
Good afternoon,
Are there any repercussions to using SCVMM 2012 R2 in a Hyper-V environment that is running Windows Server 2012? My Hyper-V hosts are running Windows Server 2012.
Thanks,Hi,
running SCVMM 2012 R2 in a Windows Server 2012 Hyper-V environment is fully supported
best regards Marc Grote - www.it-training-grote.de -
Not able to install studio + controller on windows server 2012 r2
Hi,
i have installed windows server 2012 R2, now i want to install windows HCK 2.1 with controller + studio option but i am not able to install because that option is grey. what additional settings i have to do in order to successfully installation
of WHCK. please guide me.
ankur dubeyHi, see the
Windows HCK Getting Started.
Note:
Controller isn't supported on Windows Server 2003, Windows Server 2008, Windows Vista®, Windows XP, or Windows 2000.
Controller isn't supported on an installation that has already been set up as a domain controller.
Controller isn't supported in a virtual PC or any third-party Hypervisor environment.
Greetings
Nino
...esistono i motori di ricerca, facci un salto e troverai molte delle risposte che ti darò io. -
NPO wants to get windows server 2012 r2 datacenter as the main operating system and then windows server 2012 r2 essentials plus 10 windows 8.1 as virtual desktops. Each desktop for one remote user running office 2013. Is there a better configuration?
In either case what licenses does the NPO need to purchase?
BobHi,
For license related questions we recommend you contact Microsoft licensing specialist.
http://support.microsoft.com/kb/141850/en-us
Regards.
Vivian Wang -
Laptop config for running Windows Server 2012
Hello,
For demo purpose I need to install Windows Server 2012 on a laptop, and some other 64 bits applications.
Do you experiment a specific laptop which is running fine with this OS?
For example I tried with Intel i5 and 16 GB RAM : Excel takes 10 min to load and most of the time it announces "Not responding". Same thing for all the other applications. I'm quite paralyzed in my job.
Thanks for advises!Hi,
I am not sure what is wrong with your setup, but Windows Server 2012 can run on laptop totally fine.
Especially with your rig. Can you tell us did you do a fresh install of Windows Server 2012?
I checked some pages (not to jump to conclusions myself), and I have found out that others didn't have any issues with the setup.
These are the requirements (doesn't matter if it is a standalone physical machine or a laptop):
Windows Server 2012 requirements
Make sure your drivers are up to date.
In this article you will see that the guy used a laptop on which he had Windows Server 2008 (lower config than yours), and it worked just fine:
Installing Windows Server 2012 on ThinkPad T61
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights. -
Forest and domain functional level Windows Server 2012 R2 - what's new?
Hi, I still can't find documentation about the new domain and forest functional levels in WS 2012 R2.
a) "What's New in Active Directory in Windows Server 2012 R2"
http://technet.microsoft.com/en-us/library/dn268294.aspx
No word about it.
b) "Understanding Domain and Forest Functional Levels"
http://technet.microsoft.com/en-us/library/cc771294.aspx
Still WS 2012.
ThorstenFor what's New in Active Directory in windows server 2012 R2,
Read the following Blog
http://policelli.com/blog/archive/2013/06/27/whats-new-in-active-directory-in-windows-server-2012-r2-preview/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer". -
Hi,
I downloaded
Windows Server 2012 Evaluation Version recently. Actually, I wanted to check whether i could run Windows Phone 8 emulator on Win server 2012 using my core2duo (Non-SLAT PC). Now i wanted to activate the evaluated version by using product key of my
MSDN's student account. But its giving error when i enter my product key. I checked this article about converting evaluation version to full retail version. The article
says :
"If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additional
domain controller on a server that runs a retail version and remove AD DS from the domain controller that runs on the evaluation version."
So kindly guide as to how I can install this additional domain controller and how to remove AD DS from domain controller. Currently, I have Dual Boot PC( win 8.1 and win server 2012).
Hoping to get a brief response....
Unless you have configured a whole lot of things into the DC running on the evaluation copy (should never install production on an evaluation copy), it would be simplest to start from scratch and reinstall.
Or, you simply go into Server Manager > Manage > Add Roles and Features to remove the AD role. Then you will be back to a workgroup server.
The evaluation version is good for 180 days plus three re-arms of 30 days each. So you can do a lot of experimenting with the evaluation copy without the need for using an MSDN key.
.:|:.:|:. tim
Maybe you are looking for
-
Need to import website to new computer
We purchased a new computer, and from the old computer we published our website to a folder thinking I could import it when we got the new computer (the old computer is now gone without grabbing the domain file that some of the posts talk about). Is
-
About finding good compression settings to email clips
Hi all, I want an easy way to email something I'm working on, usually anything upto 60sec. Copying some of settings the edit assistants use to email to clients here's whast I'm doing: Aiming for end size of clip to be near to but not much more than 5
-
Monitoring 3750x and 3560x Redundant Power Supply and Fans
I need help for monitoring the redundant power supply of my switches (3750x and 3560x) I have configured my snmp on my switches and is able to monitor interfaces, temperature and etc. The problem is when I am monitoring the redundant power supply and
-
Moving an image with actionscript
I'm trying to move an image from position Y:0 to Y:-100 using actionscript when the .swf file loads, as this is smoother than conventional tweening??
-
How do you fix a fine line scrolling on the screen of all apps ex wallpaper, email,safari,word?
How do you fix a fine line scrolling on all screens - ex wallpaper,email,safari,word etc?