Upgrade Acrobat 7 Pro (Mac OS10.6) to Acrobat X
I used to work on Mac Os 10.6 with Adobe Acrobat 7 Professional, but when I tried to install it with my new Mac (OS 10.7) it tells me that PowerPC is not available.
Should I buy Acrobat X or is there a way to upgrade my Acrobat software to be compatible with this new OS?
tnx
Acrobat 7 being old version may not work on the new OS architecture.
You have to upgrade to the latest i.e, Acrobat X in order to install on 10.7
Similar Messages
-
I need to upgrade my operating system, Mac OS 10.7.5, and want to know which one to use.
How can I upgrade my macbook pro Mac OS X 10.7.5?
So that is what is listed as the OS X version your Mac is now running?
If so then you have Lion. Again why do you think you need to upgrade? What did the store tell you that makes you think you need to upgrade? Are you having some type of incompatibility with some other Apple device?
You can upgrade to Mt Lion for $20 or Mavericks for free if your Mac meant the system requirements for those other versions of OS X.
But the real question is still why do you need to do this upgrade. There has to be an underlying reason for it.
pschmidt712 wrote:
Mac OS X version 10.7.5 -
I've had issues in the past with Acrobat Pro losing functionality after I've upgraded to a newer Mac OS. Hopefully this won't occur when Mac launches Yosemite. Any comments?
I upgraded to Yosemite and I can no longer print 2D barcodes. I have deleted and updated all my print drivers, so it is an Acrobat Pro (11.0.9) problem.
-
My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
I feel an older upgrade than Maverick might be better for my machine?
Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
How to proceed?Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Problems with Mail after upgrading to MAC OS10 version 10.6.8
I upgraded to MAC OS10 version 10.6.8 about ten days ago, and have since had lots of problems with mail. Since I upgraded, I have downloaded several software updates, including one for improving the general softeware system of Leopard. Since this morning, I no longer have the Mail icon in the dock and when I try to open it in Applications a window comes up saying:
'You can't use this version of Mail with this version of Mac OS X. You have Mail version 4.5 (1084/1085). It can't be used on Mac OS X Version 10.6.8 (Build 10K549)
Can I download a version that I can use with this Mac, and can anybody give me the site where I can find this. I have tried without successYou should consider downloading the 10.6.8 combo updater and applying it again.
http://support.apple.com/kb/DL1399
Pondini has a great page about upgrading.
http://pondini.org/OSX/Combo.html -
I was running remote desktop on my old mac pro running 10.4.11 Just upgraded to new pro running 10.6.7 Can I get my previous remote desktop to
run on new computer?
ThanksAre you talking Apple's Remote Desktop software, or Microsoft's?
-
How to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?
hello,
i try few different way but still don't know how to scan things.
anyone know how to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?
it have no problem on printing by wifi.
thanks,
LesHi Les,
Follow these steps to scan with the HP Scan software:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
If you do not have the HP Scan Software located as the socument states, download and install the following software.
Be sure to seect HP Scan while installing the software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-124923-3&cc=us&dlc=en&lc=en...
Additionally you may scan with Apple's software by following these steps instead:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
I want to upgrade my macbook pro with new mac pro (2011).any ideas?
i want to upgrade my mid 2010 mac pro with the latest one. what i need to do for this?
there is no new 2011 Mac Pro other than new firmware to enable Lion only.
you can upgrade the processor easily if it is a single socket to W3680 for mere $619
If you are not talking workstations you're in wrong forums. -
I have upgraded my macbook pro to Lion, using Icloud if take a photo on my Iphone this syncs to my mac however my video does not synce wirelessly from my iphone to macbook. How can I get this to do it.
Thank for the quick response, is there any way of syncing video files wirelessly from IPhone to Macbook or can this only be done by connecting IPhone to Macbook using USB Cable.
-
Can't upgrade my macbook pro to the recent Mac OS...
I have problem with my macbook pro 15 inch, that i bought in mid 2009.
Before the problem, i can upgrade my laptop to Mac OS 10.6 without buying the OS upgrade. But after it has problem and i reinstall it with a DVD which comes with it. i can update it only till Mac OS 10.5.8. and when i launch the update manually, it mention it was the latest os for my mac.
Do anyone know how to deal with this problem? please tell me what i can do to upgrade my laptop. all your ideas is appreciate... thanks in advance!!!i click on apple software update in the apple icon on the left corner of my laptop
That will not update you from 10.5.8 to 10.6.x, as you seem to believe it should. 10.6 is only legally obtained by buying it (or buying a machine with it installed). So what I'm saying is that if you downloaded something that upgraded you from 10.5 to 10.6, it was illegal. But I suspect that your memory on this point is faulty, and that you either installed 10.6 from a disk that you no longer have and don't remember having or you didn't actually have 10.6. Or, one other possibility - if you had your machine in for service at some point, it's not unheard of for techs needing to reinstall the system to install whatever system is close at hand without consideration for what system you actually own, and people have ended up with 10.6 after a repair when they had 10.5 before. -
Flattening a stamp in Acrobat 9 Pro (mac)
I use a stamp for my signature in Acrobat 9 Pro (mac). After placing my stamp signature, resizing and placing on the signature line where I want it, I have been using "Preflight" and "Flatten Annotations and Form Fields" to flatten my stamp so it prints/exports/emails with the signature firmly placed.
However, recently, when I use that preflight setting the stamp is re-enlarged to the full size (from when I placed it) and moved to the middle of the document. The process is completely unusable.
Does anybody know what I am either doing wrong or what needs fixing?
I confirmed this in multiple documents.
Thanks.Have you tried flattening using PDF Optimizer (under Dischard objects)?
Another tool you can use can be found here: http://www.uvsar.com/projects/acrobat/flattener/ -
Advice on upgrading to SSD for Mac Pro (optimized for AfterEffects & Photoshop)
Hello,
I'm an animator (I use AfterEffects CS5, but will be upgrading to CC soon) and I'm going to start work on a new AE project in a few months for an animated film that will be very demanding (lots of different shots -- meaning multiple projects, all of which will also incorporate large HD stock footage elements as well as multiple layers of art created in Photoshop).
So I'm looking to upgrade my current desktop Mac Pro (a 2010 2x2.66GHz 6-Core Intel Xeon) with SSD drives (and possibly a new graphics card) in order to speed up my system and optimize it for both AfterEffects and Photoshop. (In the past I've created projects using external 7200 RPM hard drives connected via eSATA). I've also decided, for now, not to purchase the new Mac Pro, but rather try and make a smaller investment to speed up my current system.
I'd love any advice that pro users would have that have made similiar upgrades, both in terms of the best equipment (SSD drives and graphics card) and the best way to set up AfterEffects/Photoshop projects using these SSDs.
For example:
1. Should I be purchasing 1 or 2 SSDs, and how should I be using these drives to optimize my system for AfterEffects and Photoshop?
2. Should I install my operating system (I'm on OS 10.8.5 but plan to upgrade to Mavericks when I upgrade to CC) on one separate SSD, and then install my Adobe applications on a 2nd SSD, or can I put both the operating system and applications on a single SSD? And should I be saving my projects on a SSD (if so, which one, if I'm supposed to purchase 2?
3. Should I assign a 2nd SSD as a scratch disk for AfterEffects or Photoshop?
4. I plan on using my current external hard drives (a 12 TB RAID array connected via eSATA) to store the footage and Photoshop elements being used in my AE projects (these files will be multiple GBs, and I can't afford to purchase SSD drives to hold these elements on) and also to store the renders from AfterEffects (which will also be very large files). Is this OK, or will this slow me down and negate whatever speed I've gained from moving to SSDs?
5. In researching how to switch over to SSD, I've considered purchasing 1 or 2 SSD drives. The one I'm currently looking at is called the Murcury Accelsior_E2, a PCI Express SSD sold via OWC. It comes in a few different sizes (120 GBs, 240 GBs, 480 GBs, 960 GBs). Just wondering if this is a good purchase -- the reviews seem to be very positive:
http://eshop.macsales.com/item/OWC/SSDPHWE2R960/
6. I'm also considering upgrading my current graphics card (ATI Radeon HD 5870) to the NVIDIA Quatro 4000 or NVIDIA Quatro 5000, but I'm wondering how much of a speed boost this would give me.
Here's an overview of my current system:
Computer: 2010 Mac Pro with 2x 2.66 GHz 6-Core Intel Xeon
Memory: 64 GB DDR3 ECC
Graphics Card: ATI Radeon HD 5870
Hard Drives (Internal): 2x 2TB Hitachi HD
Hard Drives (External): 12TB OWC Mercury Elite Pro RAID drive array (connected via eSATA)
Apologies in advance for the long message, but I've always recieved great advice from these message boards and I'd appreciate any help!
Thanks,
DanThanks so much for jumping back into the discussion, The hatter! I had some earlier questions from before that I was hoping you could answer:
Currently I own a 12 TB OWC Mercury Elite Pro RAID drive array (connected via eSATA) which I use to save projects, project files, and renders. So (unless I am mistaken) you're recommending that I continue to use this RAID array to save projects, project files, and renders.
(I was looking into purchasing a Mercury Accelsior_E2 for my SSD via PCI -- it has eSATA, so I can continue to connect my RAID array)
Then I would use my new SSD via SATA II for my system, apps, and OS (minus home folder media files, data, documents) and my SSD via PCI for scratch disks for Photoshop/AfterEffects.
Currently I have 2 x 2 TB internal hard drives, which have all my OS + home folder media files.
Can I get more details in terms of the step-by-step instructions when it's time to install/clone? Here's how it looks to me (apologies if I have this out-of-order, and feel free to correct me if I've missed a step or have it wrong -- thank you in advance!):
1. Purchase SSDs (via PCI and internal SATA II) and install them inside my Mac Pro.
(Is there any formatting I need to do at this point to the SSDs once they are all plugged in...?)
2. Install TRIM Enabler
(Once it's installed, what do I do with TRIM Enabler? Is it an app that runs 24/7 in the background, or is it an app that I need to launch on a regular basis and perform commands on the SSDs...? Very confused on what TRIM Enabler does.)
3. Use CCC to clone system from old internal hard drive to new internal SSD drive. When using CCC, deselect media folders in home account before cloning (so I am NOT cloning media folders from old hard drive to new SSD drive).
(What specific media folders should I be deselecting? I'd like to keep my music, movies, iPhoto/Lightroom files, and email archive where they are now -- on the 2 x 2TB internal drives that shipped with my Mac Pro. Is there a link that provides more info on this process? Never used CCC before but I assume it's not too hard to use...?)
4. CCC clones system gets 'cloned' (minus the media folders) to the SSD that is installed via SATA II in empty internal drive bay inside Mac Pro.
5. Repair the SSD with DU after cloning and before using and booting from SSD.
(What is DU? How does it work? Not familiar with DU...?)
6. Reboot computer from system running on SSD.
7. Open Photoshop/AfterEffects (now running from SSD) and assign new scratch disk (the SSDs on PCIe SSD controller).
8. After 100% sure that system + apps that have been cloned is working via SSD, delete ONLY system and apps from old hard drive (but do not delete media files).
(Now that my system is on a separate SSD drive, when I do things like purchase new music from iTunes, will it get downloaded to the old location (my old hard drive with all my media)? In other words, are there steps I have to perform in order to relink my media folders now that they're on a separate drive?
Thanks,
Dan -
After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013 -
My upgraded Acrobat Pro DC keeps asking me to sign in, when I already am
My upgraded Acrobat Pro DC, which is part of my Creative Suite, keeps giving me this message every time I try to do something with the software. I am already signed in
Acrobat Trial,
00 Days Remaining
You can try this product for zero days . . .
License this software
I click on License, I am signed in,
"Creative Cloud will now be licensed . . ."
And to recycles every time I close Acrobat Pro and then start using it again.Hi williams28054184,
Could you please share screenshot of the message that appears again and again on your screen.
Try logging out of your Creative Cloud account, restart the computer and then sign in again to see if things work fine.
Please try this and let me know if this helps.
regards,
Anubha
Maybe you are looking for
-
View Link on two programmatic view objects
Hello, I use Build JDEVADF_11.1.1.1.0_GENERIC_090615.0017.5407 I have two programmatic View Objects with data from other sources (an ArrayList in my example). Now I would like to create a View Link on it. How can I do this? I'm quite new on Java and
-
I have an iPhone 5 from India. I am going to USA for studying. Can I use the same iPhone over there or I will have to buy a new one?
-
HP Officejet Pro 8500a plus Full-full Reset
I have this same problem: http://h30434.www3.hp.com/t5/Other-printing-questions/HP-8500A-premium-a910-The-touch-screen-will-re... i tried partial reset and semi-full reset but doesnt work for me,i hope someone knows a way to do a full-full reset lik
-
Using Adobe XI, when trying to open PDF I get a blank page with small "x." How can I open the docume
Ocassionally I will try to open a PDF. The document is not viewable. I can only see a white page with a small black "x" in the top portion of the page. I have a "repair" in adobe. I have the latest version Adobe XI. Any suggestions on what I can do?
-
Podcast Artwork not showing up in iTunes
I have a new podcast which was recently approved by iTunes. All appears to be well with the feed setup, but the artwork is not appearing properly in iTunes. I have checked the setup on my end and the raw feed XML, and I don't see the problem, as the