Upgrade and old version.

hello, I have two questions, the first is: when I install a new version I have to uninstall the previous one? The second is: can I install the old version on another pc? Thank You.

Yes, to both. Be sure to deactivate the old version before uninstalling, if necessary.

Similar Messages

Upgrade and old version are both on my mac?

So, am I supposed to have both the CS4 and Cs6 on my mac after the install? Is that to continue to support any thing that I created in Cs4? Or did it download incorrectly? How do I fix this?

Upgrades do not replace the version that they ipgrade. Upgrades are independent installations such that you can retain use of both the original and the new versions. If you prefer to get rid of the old version, it is best to do so before you install the upgrade version. YOu do not need the original to nstall the upgrade, you only need its serial number.

I did an upgrade from 4.0 to the new 6.0 about 5 months ago. After the upgrade installed it said reboot system to apply upgrade. Now it wont open and keeps telling me that the older version needs to shut down the computer and upgrade the old version.

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

Documentation on differences between Version ECC 6 and Old version

We are looking for information/documentation on differences between Version ECC 6 and Old version for HCM. Appreciate for your great help.
Best Regards,
Eric

Hai..
Re: differnce b/n 4.7 and ecc 6.0
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
https://websmp210.sap-ag.de/releasenotesRelease Notes
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/instguides
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
http://solutionbrowser.erp.sap.fmpmedia.com/
http://solutionbrowser.erp.sap.fmpmedia.com/

I have an early MiniMac with OS X 10.4.11. Can I get a free OS upgrade and which version should I choose? Do I just download and over ride the current OS system or what?

I have an early MiniMac with OS X 10.4.11. Can I get a free OS upgrade and which version should I choose? Do I just download and over ride the current OS system or what?

First what model Mini do you have? That will determine how high y can go.
How to identify Mac mini models
In any event you will have to pay

Upgrading from old version

I'm wondering about the upgrade procedure for AE CS3 and CS4. If I had a old version of AE like, say 5.5, could I upgrade to AE CS3 if I'm on a Mac running Leopard? If I understand correctly AE 5.5 works on Mac OS 9 and below... So does the previous version of AE actually need to be installed or would I just need the serial number?
Hope this makes sense.
Thanks

You don't need to have the previous version installed in your machine. You only need to have the serial number from the old version.
After Effects CS3 can be upgraded from AE 5.x or newer.
After Effects CS4 can be upgraded from AE 6.x or newer.

Upgrading from old versions

A colleague and I have just received new PC's. They came with
Microsoft Office 2003 pre-installed. Previously we were using
Robohelp 2002 with MS Office 97. When I tried to install RH2002 on
our new PC's it failed as the new MS Office was incompatible. So,
we purchased upgrades to RH6. When I tried to install the upgrades
that fails because we don't have an old version of RoboHelp
installed. The installer prompts for a serial number/key for RH X5,
which we don't have. I spoke to Adobe Tech support who said I
needed to talk to Customer Support, who said I should talk to Tech
Support......
At the moment I can't install my old RH because of MS Office
2003, so I can't upgrade to RH6 which I need to support MS Office
2003. Has anyone ecountered a similar problem in the past? What it
Adobe provide as the solution?
TIA
Mick Mathers

They don't have X5 Colum.
Mick, you could be in trouble here. You can upgrade from any
version. I am not sure if you have to go via Support if it is
earlier than X5 but the issue here is that you don't have your 2002
serial number to start with. The link below tells you what to do
but because your version is outside the parameters, it maybe that
Adobe cannot help you if you did not register.
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15292&sliceId=1

LV7 to LV5.1 vi conversion, must I upgrade my old version of LV5.1?

I have some vis that I believe are created in Labview 7 that i would like to open and look at. However I dont use labview a great deal and so only have an old version (LV5.1). Is my only option to buy an upgrade to LV7 so I can open the vis? Is there another piece of software out there that can do this for me?

Ok great. As theres a library with the two main vis i would guess that theres sub vis within the two main ones, and its probably going to be the sub vis that do the nitty-gritty stuff i want to get at (comms with the serial card). Not sure how many in the lib but i think theres a few, guess it may take somebody a while to convert, but it would be much appreciated.
Best regards
chris tanner
Attachments:
GscApiLabView.llb ‏647 KB
plxsw-sio4b-labview-sample-test_v1.vi ‏224 KB
plxsw-sio4b-labview-sample-test_v2.vi ‏203 KB

CS4 Upgrade and Previous Versions of Photoshop

As a long-time Photoshop user, I have upgraded my versions of Photoshop over the years and currently have the CS4 Photoshop Upgrade loaded on my computer. I have an older computer with limited hard drive space and am running out of room. Is it necessary to keep all the previous versions of Photoshop on my computer's hard drive in order for the already-loaded on my computer CS4 Photoshop Upgrade to run? In other words, can I remove the earlier versions (like Photoshop 4, Photoshop 6 Upgrade, Photoshop 7 Upgrade, and CS2 Photoshop Upgrade) and still have CS4 Photoshop Upgrade run ok? I'm trying to clean up hard drive space and would like to make space by deleting the previous versions, but I don't want to mess up my CS4 Photoshop Upgrade if that program somehow ties into components from the previous upgrades.
Any help would be appreciated. Thanks.

Thanks for the response. I currently have CS4 Photoshop Upgrade version already on my computer. In addition to that, I also have on it Photoshop 4.0, Photoshop 5.5, Photoshop 6.0 Upgrade version, Photoshop 7.0 Upgrade version, and CS2 Photoshop Upgrade. What I need to know is can I remove the earlier versions of Photoshop or will it negatively affect the operation of CS4 Photoshop Upgrade (since it's not the full version and only an upgrade of the upgrades installed earlier)? (The only full version of Photoshop I have is Photoshop 4.0 -- everything after that was upgrade versions.)

When i attempt to dl itunes10.0 everything installed but itunessupports, updates quick time not itunes exe and old version of bonjour can't be removed

itunes won't completely install 10.0 and ipod touch is stuck in recovery mode

Hi Barbara,
I had a similar problem recently and using the "more like this" feature I discovered an answer. To a problem posed by Holo7, who like myself was a newbie on this platform, b noir proposed a solution to Holo7's problem that also worked with my problem. It involves downloading a version of MS Windows Instal Cleanup and using it to completely remove all traces of the old version.
If you look at my problem (follow OldGit66) and the link to Holo7's problem then you will find b noir's answer which I think may help you. I am new around here so you might want to wait for one of the higher status correspondents.
Regards
John

UNINSTALL / DELETE TRIAL VERSION AND OLD VERSIONS (mac)

How can I remove all the old versions and the trial version of the programs. I paid for the CD version and when I downloaded the trial some of it didnt go in correctly. So I want to assure it is all gone before I put the paid version in.
(Paintshop Pro 5/ and 6) Lightroom 3 and 4 also. I have removed some of them but not all
PLEASE advice how to do this.
THANKS in advance for your help and support.
Leonardo

You can find the uninstallers at Applications/Utilties/Adobe Installers/

Snowleopard upgrade and full version

I have macbook with leopard. I want to upgrade it into snowleopard. But I found 2 types of dvd, upgrade version and full version. What is the differences and advantages between full and upgrade? If I buy the full version, could I install it in my mac(leopard)? Because I found more easily the mac box set (full version) that is cheap.
Thanks

The 10.6.3 white retail disk (so called "upgrade disk") sold online at Apple are full version disk of OS X Snow Leopard, however it also has a upgrade installer for OS X versions 10.4 and 10.5.
So if you boot the Mac into 10.4/10.5 and stick the DVD in and double click the upgrader, it will replace 10.4/10.5 with 10.6.3 and leave your programs and files alone.
If you stick the same disk in and boot the machine while holding c or option/alt key down (wired/built in keyboard) you get the opportunity to use Disk Utility (and others) and can erase the entire drive and then install OS X 10.6.3 Snow Leopard fresh. However this disk is sans-free iLife, but can be reinstalled via the 10.5 machine disks.
I don't know the specifics of the full version of the Snow Leopard install disks as I never used them, or what particular advantage they have (free iLife?), but if it requires a erase and install, then that's a disadvantage obviously as you can't carry over your already installed 10.5 programs.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
How to erase and install Snow Leopard 10.6
Restoring your Free iLife (iPhoto, iMovie etc)

10.6.2 Upgrade and old Airport Card Problems

Not sure if related BUT after spending the day from heck recovering from my 10.6.2 upgrade, my G4 Cube which was in the wireless network with an old airport card I pirated from and old macbook will NOT join the network. Airport Ext is set to use WPA Personal or WPA2 as security.
Any ideas?

no response at all

Tried downloading new version 5.0.1 to mac running 10.4.11 to be able to download silverlight to view a video on fidelity site. failed and old version 3.5 something is gone too. everything's gone. No chance of getting bookmarks back?

Fidelity site said I needed latest Real Player or Silverlight to view a video on my mac (10.4.11). Recommended I click "test your System" button. Did so and recoomended silverlight specifically, but my browser (using safari at the time) was incompatible so needed to download latest version of Mozilla firefox to proceed. Clicked that button and a firefox page opens with dozens of 5.0.1 versions of firefox in various languages. Find U.S. english and click. Message says I have older version (3.5.or.6 something) and do I want to replace with new version. Clicked yes and download begins of disk image. Completes and window opens with firefox icon with bar over it and system apps folder with arrow to move

Update.
I opened the iMac and swapped out the HD for one of the HDs that wasn't appearing in the Firewire cases. The HD according to Disk Warrior and Tech Tools Pro 4.5 is just fine. While this is great news, I can't figure out how 2 LaCie cases died at the same time. And a third case bought at Fry's doesn't seem to work either.
The FW ports on the iMac seem fine as my M-Audio FW works in either port.
Oh, I'm back running under 10.4.10 and the versions of the OS on DW3 and TTP4.5 are all less than 10.4.10.
I'm not going to 10.4.11 - I've learned to stick with what works and don't need to be so progressive on updates.

Upgrade from old version being corrupt

If my version of mac os x 10.4 which is on the computer is corrupt then can I use the upgrade version to mac os x leopard?

I don't know why not...
The Leopard install disk is a full install, and you'll be given the option to do an erase and install, or to save your old settings and data during the install.
Your computer should be left with a full, new, OS...
Be forwarned, Leopard takes more HD space (about 5Gb more, I believe). Take a look at the requirements before you purchase, if your HD is a smaller one, or your cpu is slower...
http://support.apple.com/kb/SP517
Bob
(running 10.5.8 on my G-4 Powerbook just fine).

Upgrade and old version.

Similar Messages

Maybe you are looking for