"Upgrade are failed!"

I tried to upgrade my firmware for my WRK54G router with the file that I downloaded from the Linksys website twice and I keep getting an "Upgrade are failed!" error message. Any suggestions?

Disable all firewall & antivirus software on your computer .....
reset the router for 20-30 seconds ......
Again download the firmware from http://linksys.com/download .....

Similar Messages

WRT54GL v1.1 firmware upgrade: "upgrade are failed"

I am trying to upgrade my WRT54GL v1.1 firmware. I have downloaded a file called FW_WRT54GL_4.30.13.016_US_EN_code.zip, which I have unzipped to yield a file with a .bin extension. I am using the web interface to upgrade the firmware with the .bin file and get the error message "Upgrade are failed" very late in the upgrade process. I have tried resetting the router by holding the reset button for 30 seconds, but this doesn't help. I am using Safari on a Macbook Pro running Snow Leopard 10.6.2. Any help is greatly appreciated.
Solved!
Go to Solution.

Thanks for the tip. I took the router to a friend's house and upgraded the firmware with his peecee running Windows XP and a recent version of Firefox. Rather disappointing that mac support is so poor.

Upgrade are failed!; WRT54G_v2

130228_1900est
hello,
just troed to update FIRMWARE re our WRT54G_v2
current FIRMWARE
Firmware Version: v3.37.7
downloaded and tried to run
130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
BUT got msg'
Upgrade are failed!;
WHAT'S WRONG?
Thanks,
Steveg722
USA_RI_02917
Solved!
Go to Solution.

130301_0242est
@jlbjlb
seems the link you put is simply the procedure to upgrade the ROUTER FIRMWARE
I am following steps to do what CISCO calls a MANUAL UPGRADE (downloaded the .bin file for WRT54G_v2; Open ROUTER Setup; Go to FIRMWARE UPGRADE; browsed to the .bin file; hit UPGRADE)
THIS TIME, reset then powered down then up the ROUTER
tried to to run the upgrade again but AGAIN, Upgrade are failed!
Does anybody know what the problem is her and how I can get the FIRMWARE updated?
Hope so.

WRT54G v3 "upgrade are failed"

I am running the WRT54G router, version 3, and trying to upgrade the firmware. It's been locking up and losing my wan connection on a somewhat regular basis and I thought the upgrade would help.
When I try to upgrade to the latest firmware I get "Upgrade are failed" while the progress bar is at about 20%.
Basics:
WRT54G v3
have upgraded firmware since purchase - currently running 4.20.6
trying to upgrade to WRT54G version 3 firmware version 4.30.5
PC running windows XP
I am connecting via wired, not wireless.
Attempts:
1) Logged into router through web interface and went through Administration-->Firmware Upgrade
Result: Failed
2) Downloaded firmware again (in case it was corrupted) and tried through web interface
Result: Failed
3) Hard reset of router - held down power 30-40 secs - then tried update through web interface
Result: Failed
4) Downloaded tftp program and used it
Result: Failed
Can anyone give any other suggestions or tell me if they've successfully upgraded to this version of firmware?
Thanks!!

Try this:
1. Disconnect all the devices from the router. Only the computer used for the upgrade should be the only device wired to the router. Even the modem shouldn't be connected.
2. Reset the router for 30 seconds. The IP address of the router will be back to 192.168.1.1 after the reset.
3. Disable all firewall and security software on the computer.
4. Set a static IP on the computer. Use:
• IP: 192.168.1.5
• Subnet: 255.255.255.0
• Gateway: 192.168.1.1
5. Force your network adapters speed to 10 Mbps Half.
6. Make sure you could still ping the router's IP address (192.168.1.1).
7. Upgrade the firmware thru the web user interface (Administration tab. Firmware Upgrade tab.).
8. If it fails, use the TFTP utility.
9. Reset the router for 30 seconds after a successful upgrade.

Linksys WRT54G "Upgrade are failed!"

Hi
I have Firmware Version: v4.21.1 and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"
Solved!
Go to Solution.

No. You must only use firmware versions for 2.2, nothing else. Firmware version 4.21.1 is the latest so there is no need to upgrade.

WRT54GS "upgrade are failed" is what i get when i try to upgrade.

i get into the router page , click on administration, click firmware upgrade, click brouse button to find the firmware i just downloaded , the file ends with .bin, and when i click upgrade, it says "upgrade are failed". any more ideas, i don't like this router..

hi....this error message comes up when you select a wrong firmware file from the website.....
ensure that you select the right model no and version no of the hardware unit....download the firmware and if is a zipped file , unzip it first and use the "bin" file for upgrading the firmware....or else if you directly get a bin file on the website , save it and through the ui , upgrade it...
one more option is to download " tftp.exe " file from ftp.linksys.com/pub/network and save it first... then run the exe file....here under server will go the router's ip add , enter the router password under the password field and browse the firmware file...then click upgrade.reset the router for 30 secs and then reconfigure it...

Upgrades are failing

Creative Cloud notified me of two apps that need upgrading. When I try to get the upgrades I get a upgrade failed message.

[ Mac 10.9.3 / Indesign CC update fail / Premiere update fail / Adobe Media Encoder 7.2.2 update fail ]
There's no separate uninstaller for AME. My ID CC and Premiere couldn't be updated (for the AME7.2.2 update). MCMHMPEGVideoCodec.framework seemed to be the factor.
I uninstalled Premiere (only), after having manually removed MCMHMPEGVideoCodec.framework from inside AME. After boot I installed it again and voilà, both (ID & Premiere) updates went trough fine. The MCMHMPEGVideoCodec.framework was on place inside AME too.

WRT54GS "Upgrade are failed" - unable to find solution

I noticed other people are having this problem, but I still haven't found a solution for it.
The label on my router says "WRT54GS" and the current firmware is 4.71.4. Can anybody point me to the proper file?
Thanks!

What is the version number of your router?
http://homesupport.cisco.com/en-us/support/routers/WRT54GS

Wt350n Upgrade are failed

I am attempting to upgrade my firmware on the wrt350n, I have version 1.03.2 and I now have version 1.03.7 downloaded. I am looking for a bit more stable connection and somethign that can tell the difference between a wifi con and a lan con in the reports it gets that confused all the time. Anyway who writes these errors
Thanx
Glen

Yes the format of file is .bin
You need to download it save it on computer.
Open router set up page using http://192.168.1.1 ….you will see username & password screen .Leave username blank & in password use admin.
Click on Administration tab……browse the file & click upgrade
After upgrade reset & reconfigure the router

SSIS packages are failing after upgrade to SQL server 2014

Hi,
I have some SSIS packages running on SQL server 2012 .
After I upgraded to SQL server to 2014 from 2012 , the SSIS jobs are failing on the SQL agent.
And i can see its related to Data source connectivity to the SQL agent. I hope it not able to identify the connection manager in SQL agent. And connection adapter is not upgraded.
I read some articles about this and they say it not able to connect to SQL server agent job.
And, I can see that the package is running if i run manually using SQL 2012 run time.
Why its not running on SQL 2014 ?
did i miss anything while upgrading SQL server 2014 ?
Please give me some suggestions to solve this issue.
And is there any way i can change the SQL server agent 2014 to adapt this and run ?
Below is the error :
The Package filed to load due to error 0XC00100014 " One or more error occurres. There should be more specific errors preceding this one that expalins the details of the erroes. This message is used as a return value from functions that encounter
errors.: This occures when CPackage::LoadFormXML fails.
Regards,
Vinodh Selvaraj.

I think you have typed this error message by yourself.
Anyway, as it says there should be more error preceeding to this. Do you have any other errors which describles the exact issue stating at what task it fails?
If not, then there are various reasons behind this issue. 3rd party connection manager such as Oracle Attunity or it may be 32/64 bit issue.
You may try executing package in 32 bit mode from SQL Agent Job.
Please refer:
http://blogs.msdn.com/b/farukcelik/archive/2010/06/16/why-package-load-error-0xc0010014-in-cpackage-loadfromxml-error-appears-while-trying-to-run-an-ssis-package.aspx
http://www.bidn.com/blogs/timmurphy/ssas/1397/package-failed-to-load-due-to-error-0xc0010014
-Vaibhav Chaudhari

Since upgrading to Lion, my time machine backups are failing - error message: The backup disk image "/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska's MacBook.sparsebundle" could not be accessed (error -1). Any ideas?

Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks

Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr...

Yosemite install fails with error "Please note OS upgrades are outside of our EULA".

I'm running a late 2013 MBP Retina w/ Mavericks. I've downloaded the Yosemite installer. Every time I run it, a message pops up:
"Please note OS upgrades are outside of our EULA". <OK>
When I press OK, it quits. What does this mean and how do I get past it?
Thanks!

I'm running a late 2013 MBP Retina w/ Mavericks. I've downloaded the Yosemite installer. Every time I run it, a message pops up:
"Please note OS upgrades are outside of our EULA". <OK>
When I press OK, it quits. What does this mean and how do I get past it?
Thanks!

Windows 8 Upgrade Assistant failed on Satellite P775

I tried running the Windows 8 Upgrade Assistant on my Satellite P775.
It started by displaying
Checking Components; download Windows 8 Components data.
Reading Components.
Got component TOSHIBA Wireless LAN Indicator
... etc ...
Got Component TOSHIBA Contrasena de supervisor
Reading Windows Components.
then displayed a Message Box
"Failed to read Target (Windows 8) INI file."
How can I solve this?
Thanks

Thanks for the reply.
Yes I followed that procedure.
My model is Satellite P775-112 PSBY3E and is listed as being compatible
After installing Windows 8, I noticed that the DVD drive was no longer accessible, as described in the following thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68222&tstart=0
So I disabled the Windows Service "Toshiba Optical Disc Drive Service" (TODDSrv.exe 1.0.0.8), and the DVD drive is now visible. However Toshiba Video Player still does not work (says it has compatibility issues) and I can not view DVD videos.
I then ran the Windows 8 Upgrade Assistant, which failed immediately with the error "Failed to read Target (Windows 8) INI file".
I found some posts on the forum with a similar error with the Windows 7 Upgrade Assistant (Failed to read Target (Windows 7) INI file. None of the posts has a clear description of what this error means but I've tried all of the suggestions.
Here's a list of what I've tried:
- Rebooted
- Upgraded BIOS to latest version (2.10)
- Run Upgrade Assistant as Administrator
- Run Upgrade Assistant with "Toshiba Optical DIsc Drive Service TODDSrv.exe 1.0.0.8 started or stopped.
My main problems at the moment are:
- Toshiba Optical DIsc Drive Service causes DVD drive to disappear
- Toshiba Video Player won't run
- No way to view DVDs
I'd be happy to install the drivers and applications individually if the Upgrade Assistant doesn't work - is there anywhere I can download them?

Oracle 11g upgrade prerequisite fails for all the values

Hi,
We have planned Oracle upgrade from 10.2.0.4 to 11.2.0.2. We have
followed the upgrade guide Database Upgrade Guide "Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". Our OS versionis HP-UX ia64 B.11.31. According to the upgrade guide we have set all the environment vairables. And started the Oracle 11.2.0.2 software installation prerequisite with the command " ./RUNINSTALLER -check " The result of the prerequisite check was giving the all the parameters are failed. But the parameters like Physical memory, orasid user also showing failed eventhough we are having 16 GB of physical memory & we logged on
with orasid it self and all the parameters are showing failed.
We have check the Oracle metalink note#169706.1, According to the note we have valid version of HP-UX 11.31 and some patches are already installed and some of them are not installed. But the prerequisite check showing all the patches are in failed state irrespective of some installed patches.
Regards,
Sreekanth

Hi there
For DB upgrades to 11g there are couple technical notes .
SAP Note No. 1431793
SAP Note No. 1431797
SAP Note No. 1431800
Hope them can be useful
BR
Venkat

Upgrades consistently failing...

Every upgrade from Adobe is failing to run. I need some support. What I'm dealing with seems so insain I spent the last few days looking for some kind of malware problem. I've scanned my system with multiple tools and can't find anything. Acrobat, Photoshup, Flash, the installer all fail to update!!! I'm also seeing that upgrades to Java are failing. The errors provide no real details, most of them come back as permission errors to a file or a directory in the installation. In the case of the Acrobat - it goes through the install and before completing rolls back the install, providing nothing useful in the way of information.
I tried the cleaner on the installer, then on Photoshop, and finally cleaned the entire CS6 suite and am reinstalling all the apps... And I just tried to do an upgrade to Acrobat (not sure why there's an upgrade when I just installed this version) and it fails.
This is eaten up too much time. I'm at a loss, extremely frustrated and ready to drive to Walmart to see if they are hiring greeters. This is not normal, eating into my ability to finsih projects and not how I want to spend my time. Please help.

You do not tell us anything about your system or give specific error messages. However, you are also having problems installing non-Adobe software. This could be an issue with a virus or it could be an issue with a broken Windows Installer program (but we do not know you are running windows), it could be a permissions issue.

"Upgrade are failed!"

Similar Messages

Maybe you are looking for