Upgrade ASA Software from 8.3.2 to 8.4.3

Hi,
does anybody did an Upgrade from an 8.3 version to the new version 8.4.3 and can give some hints or links to read?
I only have a production system and nothing to test and I don' want to get a nasty surprise...
Thanks a lot in advance

If you're already on 8.3(2) you've already gotten past the tricky bit - the new NAT syntax and access-list object use. There are some minor changes with identity NAT in going up to 8.4(3) as described here but that's about it as far as things to watch out for.
The TAC is quite helpful and it is a good idea to open a case proactively just to have them on hand to take a quick look at any issues that come up. The TAC security team deals with these upgrades every day and is very adept at zeroing in on the root cause of any issues you are having and setting things straight within in few minutes.

Similar Messages

Will it be possible to upgrade the software from LR 4 to LR 6?

I own LR 3 (full) and LR 4 (upgrade). Will it be possible to upgrade the software from LR 4 to LR 6 directly?

In the past, the upgrade version of Lr upgraded all versions from v1 onwards, and I see no reason why this should not be true this time, but can make no promises, mainly because I have no connection to Adobe.
So yes, you will probably be able to do as you want.

After upgrade of ASA software from 8.3.25 to 8.4.3,

clientless SSL VPN users are denied connection. Also, a pop up window appears with the following text message:
"SSL VPN Relay mismatch, you need to log off Windows first." Of course, logging off and on WIndows per the message corrects the issue and
allows the user to connect.
I am trying to understand why it is neccessary to log off Windows. I can't say that I have seen this with prior upgrades i.e. from 8.2 to 8.3.
Thanks in advance,
Charles

If you're already on 8.3(2) you've already gotten past the tricky bit - the new NAT syntax and access-list object use. There are some minor changes with identity NAT in going up to 8.4(3) as described here but that's about it as far as things to watch out for.
The TAC is quite helpful and it is a good idea to open a case proactively just to have them on hand to take a quick look at any issues that come up. The TAC security team deals with these upgrades every day and is very adept at zeroing in on the root cause of any issues you are having and setting things straight within in few minutes.

Can't upgrade my software from OS X 10.6.8 to 10.8. It does not appear in Software update either?

Hi,
My mail has stopped working on my Macbook and I think I need to update my software from OS X 10.6.8 to 10.8. Strangely though it does not appear in my software updates. Can anyone offer any advice?

you need to buy 10.8 from the app store. also, upgrading to a new version of OS X will most likely not fix the problem.

I can not upgrade my software from 10.5.8 to 10.6.8

Got a new iphone 5 and I can't connect to itunes because system asking for upgrading my imac software from 10.5.8 to 10.6.8 - unfortunately system saying that my software is up to date and I'm in circle

Going from Leopard 10.5.8 to Snow Leopard 10.6.8 is paid upgrade. If yours is a PPCiMac you can not get further than Leopard. If it is an Intel iMac:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

Upgraded Desktop Software from 4.1 to 4.3

After upgrading my desktop software from 4.1 to 4.3 I am experiencing issues with synchronizing, in particular with configuring Microsoft Outlook. Each time I attempt to configure Outlook I receive the following "popup" message; "cannot find system in table file". What have I overlooked?

You might try uninstalling and reinstalling the application.
I recommend installing Desktop Manager v4.2 Service Pack 2. I have had too many issues with v4.3. However, some have got it to work just fine.

How do I upgrade my software from 10.4.11 to 10.5.8 for my iPhone 4s

I have a new iPhone 4S but can't upload to iTunes, I've found it it's due to my software upgrade but don't know how to do this? How do I upgrade my software? I keep getting lost on Apple website. Help!

Yes. Your Mac can be upgraded to Leopard but I would recommend that you upgrade to Snow Leopard instead. It will actually be cheaper. Just buy the install DVD for Snow Leopard for $29.
Then you can upgrade to iTunes 10.5.3.
Allan

Upgrading ASA (5520) from 8.2(5) to 8.4(6)

Hi All,
I'm planing to upgrade my failover firewalls active/standby from 8.2.5 to 8.4.6. I read about the NAT and I think I'm ready for it cross fingers
My plane is
Upload the 8.4.6 and ASDM 7.1.3 for both firewalls then assgin the boot and ASDM image to the new files. After thaton the active firewall reload the standby and wait until its up and running (cross finger again) then force the active to be standby and reload the standby to get the new 8.4.6.
am I right about that? or should I upgrade to 8.3.1 or 8.3.1 first ?? please if it is, can you give me the full upgarde path?
Thanks in advance!!!

I don't know if I'm going to answer your question. But here is my latest experience, about year ago. I just preformed an upgrade from 8.0.x to 8.4.4.1 on a pair of ASA 5510's in failover using CLI. The upgrade seem to go smooth from our end, but all connection did drop. We followed these steps here. NAT wasn't an issue for us.
Point is, there really isn't an upgrade path. Just reload stand-by unit, make it the active unit and watch the connections. Ours dropped don't know why.
Don't know if that helps,
Nick

Advice on upgrading ASA 5510 from version 8.4(4)1

Hello all,
Due to an issue we need to upgrade our ASA. Cisco Support team recommended upgrading to version 8.4.7, but, as we'll upgrade, we'd like to upgrade to version 9.
We still use Cisco VPN Client for Remote Access VPNs so I'd like your advice on which version to install on ASA.
Would you recommend version 9.0.3? 9.1.X?
Thanks in advance,
Igor

We have a pretty huge ASA and ASASM complex, and we are just about finished upgrading from an assortment of 8.4.x, 8.5.x, and 8.6.x installs to 9.1.3 on everything. There is one gotcha on some systems in that there is a file system change or some sort of bug that is fixed in 8.4.5 I think. So you _may_ have to first upgrade to a newer version (8.4.7 would work) before going to 9.1.3.
Our Cisco team has recommended going to version 9.x, and this is supported by recent tickets I've had on our stuff still running on 8.x, as the TAC engineer often says we need to upgrade to version 9.
Four our setup, we had some fatal bugs in 8.4.6 and 8.4.7 that kept us running 8.4.5 for a very long time on some equipment.
Anyway, I would recommend going to 9.1.3, which is one removed from the recently recleased 9.1.4. Our AnyConnect VPN complex has been on 9.1.3 for a few months now with no issues. Be sure to read the release notes thoroughly as 9.x changes some command contexts, new features, etc.
Graham

Upgrading ASA 5510 from 8.0.4 to 8.2.5

We want to implement Netflow so want to upgrade our 5510 to 8.2.5. But have a few questions.
This device has 64MB of flash and 256MB of DRAM. Would I need to upgrade RAM? Right now we have about 25 site to site VPNs running through this thing as well as a few remote clients. Is this enough to constitute a memory upgrade?
Right now we are running ASDM 6.4.7. Should we upgrade to a higher version?
And lastly, would the upgrade to 8.2.5 require the use of AnyConnect for our VPN client users? Our 5505 is on version 8.2.5 and doesn't require AnyConnect, but wanted to make sure.
Thank you for your time.

Hi Michael,
The RAM upgrade is needed if you want to go to 8.3+ code. Although you might find that you are running low on RAM and that will impact your ability to run packet captures, so an upgrade doesn't hurt...
ASDM can be upgraded seperately and does not require a reboot + new ASDM versions are backwards compatible with older ASA codes...
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html#wp42231
ASA 8.0(4)
ASDM 6.1(3) and later.Recommended: 7.1(4).
ASA 8.2(5)
ASDM 6.4(3) and later.Recommended: 7.1(4).
Although the Cisco VPN Client is eol and the replacement is AnyConnect, you are not forced to go that direction in any code...
Patrick

I want to upgrade some software from Appstore but it asks an Apple ID that I don't know

When trying to update some software (iPhoto) the following message appears.
You have updates available for other accounts
To update this application, sign in to the account you used to purchase it.
Apparently I have to know some account or Apple ID that I don't have.
I have an Apple ID but it seems that it does not work...

What id shows at the bottom of the Featured tab in the App Store app on your phone ? If it's not your id then tap on it and log out of it and you can then log in with your id.
If you have any apps or other content from the id that is currently showing then that content will be tied to that id e.g. only that account will be able to download updates to its apps and make in-app purchases in those apps

HT2404 I need to upgrade my software from Mac OS X 10.5.8 to 10.6.8.

When I search for updates it says that my mac is updated. How do I upgrade to the newer version of Mac OS X? I need this in order to install the newest version of itunes and upgrade my phone.

In order to go to Snow Leopard 10.6 it is necessary to purchase an install DVD. Call Apple and order it.
Once you have upgraded to Snow Leopard then you can update to 10.6.8
Allan

There is no camera connected after i upgraded the software from apple

There is no camera connected when i open facetime and photo booth...I've tried to reset the PRAM using cmd+alt+P+R, but the problem still remains...

If you went from 10.8.1 to 10.8.2 and haven't picked this one up yet, there is also a supplemental update which might fix it: http://support.apple.com/kb/DL1600

Trying to fix my boyfriends iphone. He upgraded software from 6 to 8 but now everything sends as text msg instead of iMessage. It is saying verification can not be made.

I Can not seem to fix my boyfriends iphone. He upgraded the software from 6 to 8. Now when I send a message it sends as a text not a iMessage. I enter his Apple ID and get message about verification can not be made. How do I fix this

Try reading through these troubleshooting steps: iOS: Troubleshooting Messages - Apple Support

Zero downtime Upgrade ASA 8.0(4) TO 8.4(7)

Hi All,
I checked a few blogs and upgrading ASA 5520 from 8.0(4) to 8.4(7) following below path. I will be upgrading RAM to 2GB at version 8.2.5. Reason for 8.4.6 is we may get an error message ""No Cfg structure found in downloaded image file" Error Message" if we upgrade directly to 8.4.7.
Please advise if we can perform Zero downtime upgrade if I follow below path and will they still be in HA? Active/standby
8.0.4-->8.2.5 (Active on 8.0.4 and standby 8.2.5)--> Will they be in HA?
8.2.5--->8.4.6(Active on 8.2.5 and standby 8.4.6)--> Will they be in HA?
I believe below one should not be a problem.
8.4.6-->8.4.7(Active on 8.4.6 and standby 8.4.7)--> Will they be in HA?
Thanks in advance.
Regards

8.0.4-->8.2.5 (Active on 8.0.4 and standby 8.2.5)--> Will they be in HA?
HA will work...as in the units will failover. But due to changes in configuration syntax you could run into problems with config synchronisation. And could also cause issues in traffic flow if a failover occurs. So it is best to upgrade the second ASA to the new version ASAP. It is also the reason cisco recommend using the same Major and Minor software versions.
8.2.5--->8.4.6(Active on 8.2.5 and standby 8.4.6)--> Will they be in HA?
Same as above.
8.4.6-->8.4.7(Active on 8.4.6 and standby 8.4.7)--> Will they be in HA?
This should be fine
Please remember to select a correct answer and rate helpful posts

Upgrade ASA Software from 8.3.2 to 8.4.3

Similar Messages

Maybe you are looking for