Upgrade ASM alone from 11.2.0.3 to 11.2.0.4 without RAC

Hi Viewers,
Can anyone provide me a steps to upgrade ASM instance from 11.2.0.3 to 11.2.0.4 and RAC is not configured.
Please share the steps or document to upgrade ASM instance in Linux.
Thanks,
Anil

When you download the patchset, it include documentation about how to perform the upgrade.
In Metalink there are several notes, I thin this is interesting, Doc ID 1434351.1
HTH - Antonio NAVARRO

Similar Messages

  • Upgrade to EHP1 java (Portal) alone from NW 7.0 SP12

    Hi
    We are in the process of upgrading our portal NW 7.0 SP12 to EHP1 SP06.
    Java FAQs says that we can use just JSPM to deploy as its just a java standalone.
    Has anyone used JSPM to upgrade to EHP1 from NW7.0? instead of EHPi?
    Thanks

    U are giving me some confidence sunny.
    I tried using JSPM but its not deducting the xml file and also I choose the single support pack (advance option) its only picking up the source version as 12 and the target version says not found?
    Does that mean I have not downloaded all the components required in EPS/in directory? if so what all components I have to download? 
    Bcos in the market place if I choose NW 7.0 ---> Link to sp stack it shows me till SPS22.
    And for EHP1NW 7.0 it starts from EHP1 ISS initial shipment stack to SPS07.
    If I download both the above I will get two stack files?
    Should I update till SP22 in NW 7.0 and then start applying EHP1?
    Thanks

  • Upgrade ASM instance database 10g to 11g

    Hi,
    In my environment, I have ASM instance database 10.2.0.3 running on solaris 10 (64-bit), I need to upgrade to ASM instance 11.1.0.6 database. please guide me an overview of steps...
    thanks in advance

    Thanks for the response,
    Sorry, In my environment I know database (10.2.0.3) is mounted in ASM diskgroups, now i have a concern
    1) If database is mounted in ASM diskgroups, could it be a database instance or it has to be only ASM instance connected to the database?
    2) As in my upgrade from ASM instance (10.2.0.3) to ASM instance (11.1.0.6), do we need to upgrade asm instance as well as database? i mean to invoke DBUA twice for upgrading ASM instance then for upgrading database as well?
    Sorry for some silly questions...please make me clear...
    Regards

  • What are the steps to upgrade oracle clusterware from 10.2.0.4 to 11.2.0.2.

    We have two node clusterware installed and we want to upgrade the oracle clusterware from 10.2.0.4 to 11.2.0.2 can any one share the steps for upgrade.
    Regards
    Naveen Dutt

    Hi Rajeys,
    I read all the documents but i was not able to find the information that i was looking. Below i am providing my cluster node configuration and version -
    1) No of Node in cluster - 2 (node1 ,node2)
    2) OCR (clusterware) version - 10.2.0.4
    3) Storage type - NAS storage (we are not using ASM).
    Now link provided by you is to upgrade ASM from 10.2.0.3 to 11GR2 but we are not using ASM as storage we are using NAS storage. Do we have any link or document that help me to upgrade oracle clusterware only without ASM from version 10.2.0.4 to 11.2.0.2 .
    Thanks in advance
    Regards
    Naveen Dutt

  • Upgrade ASM Oracle 10.2.0.4.0 to ASM Oracle 11G R2 on Windows 2008 SP2

    Please advice on procedure or where I can find information on upgrading ASM from Oracle 10G to Oracle 11G R2 (Winwdows 2008 SP2 64bit environment) for mutiple Oracle instances (not a RAC environrment).
    The current scenario is as follow:
    - Two oracle homes; one for ASM instance and another for the Oracle Databases (in current case only two oracle instances possiblly more at a later time). Both (ASM and Oracle databases) have the same version of Oracle 10.2.4.0.
    The Oracle database home can't be upgraded due to application restricition (Vendor Application not tested on Oracle 11G) but will like to upgrade the ASM instance to Oracle 11G (Oraclle 11G R2).
    Questions:
    - Is is a feasable solution? Can I upgrade ASM instance to Oracle 11G R2 to take advantage of new features? Will the ASM upgrade scenario is compatible with the Oracle Database Instance running Oracle 10G? Any possible issues that I should be aware or concerns?
    Is it possible to have ASM running in Oracle 11G R2 and service the need of Oracle database instance running in 10G?
    Please advice or where I can obtained information on the matter. Also possibly if someone has done it on Windows 2008 SP2 (not Windows 2008R2).
    Thanks in advance

    Thanks so I can upgrade the ASM Home instance and leave the Oracle Databases home on Oracle 10.2.0.4.
    I agree with you not just 100%, actually 120%. Fortunately, the vendor is finally understanding by pressure provided by DBAs and Application Teams that they are very behind the curve. It is working and by summer we should have an oracle 11G compatible product.
    The same thought went when I was told of their compatability database level.
    Regards
    Albert

  • Upgrading ASM

    Just wondering I'm upgrading my database from 10.2.0.1 to 10.2.0.3. My ASM is in a different Oracle Home. Do I need to run the upgrade process on both homes in order for it to upgrade? I know it sounds like a dumb question, but I just want to make sure there isn't a different patchset for just ASM installs.
    Thanks
    Luke

    You should check the Oracle Patchset README file. You need to run DBUA for both ORACLE_HOME and instances.

  • 11gR2 Infrastructure Upgrade Question(s) from 10gR2

    Hello.
    We are currently using both Linux (RHEL5) and Solaris (5.10) for all of our Oracle 10.2.0.5.0 RAC DBs. Weare NOT using ASM currently. So, we are going to upgrade our DBs to the latest version of 11gR2 - and this obviously will include our CRS. I know the ASM and CRS under 10g are now combined under the 11gR2 Grid Infracstructure. I have been revieiwing the Oracle Grid Infrastructre Installation Guides for both OSs. While these guides are centered on new installations, I do notice that each has a small appendix tied to upgrading activities (Appendix E in Solaris and Appendix F in Linux).
    I also have a few papers I pulled from blogs related to these activities (e. g., a blog from David Marco and another from Martin Bach) where they are updating their clusterware from 10gR2 to 11gR2. So here are a a few questions I'd like to answer - one may be obvious from what I have already read.
    1.) This may be the obvious or redundant question - almost the entire writeups in the earlier referenced appendices seem to center around an 11.x CRS to 11gR2. So are these appendices still the correct reference when going from 10gR2 to 11gR2? Just double checking myself/
    2.) Sadly, we are not going to be utilizing ASM anytime soon (tied to $$ issues realted to fiber connections). We might later, however, go to ASM. Is there anything I should do in relation to this upgrade tied to ASM that might make it easier to say move over to ASM in the next year - or should I just ignore any references to ASM during this initial upgrade?
    3.) Does anyone have any other additional document references/URLs that you might feel would be helpful in the overall 11gR2 upgrade process (both Infrastructure and/or DB)?
    Thank you in advance for any help.
    Matt

    Hi Matt;
    Please check below notes:
    Minimizing Downtime During Production Upgrade [ID 478308.1]
    Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
    Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
    How To Upgrade ASM from 10.2 to 11.1 (RAC)? [ID 736127.1]
    I suggest Please also check my blog
    http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
    In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
    Regard
    Helios

  • TS1363 I was upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7.  The iPhone hung.  It is no longer visible by iTunes on Win 7

    While upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7, the iPhone hung.  I could not get iTunes to find it and Win 7 does not see it.
    When I connect the iPhone to the USB, Win 7 issues the welcome sound, but that is it.  The same happens when I disconnect iPhone.
    The Devise Manager has the Apple Mobile Device USB Driver correct without any problem.  I updated this driver called usbaapl64.
    The iPhone is still hung.
    I restarted the iPod service
    I restarted the Apple Mobile Device Service
    I tried to empty and delete the temp directory in C:\users\myname\AppData\Local\ but could not
    The iTunes I am using is the latest version
    I updated the Apple Mobile Device Driver as stated above correctly
    The iPhone is still hung and is not recognized by Win 7 or iTunes, so I cannot restore the OS to the previous working version
    What else can I do to restore the previous working OS on my iPhone 4

    I was connecting the iPhone 4 to a USB 3.0 port.  I was told by Apple Express Support (at US$29.99) not to use USB 3.0 and to use USB 2.1 instead.
    If you are connecting your iPhone to the computer using a USB 3.0 port, disconnect it immediately.  iPhones will lock up if you try to update while  using a connection through a USB 3.0 port.
    Disconnect the iPhone from the computer
    Go to Device Manager and find the connected USB port.  Click the mouse right button and update the driver
    Shut the iPhone by pressing the sleep button and the home button concurrently for some time
    Move the USB cable to a USB 2.1 port or older without the iPhone.  
    Restart iTunes.
    Connect the iPhone
    Your computer should recognize the phone and reloads the correct USB 2.1 driver (Apple Mobile Device)
    Then iTunes should recognize the iPhone and starts reloading the firmware.
    When that is complete it may ask if you wish to restore, naturally you say YES
    iTunes will restore the iOS
    Using iTunes, restore the latest backup to get your data back.
    When all of the above is completed.  Start enjoying your iPhone.
    If the above does not work.  Throw your iPhone out of the window and get a replacement Android phone.

  • I upgraded MacbookPro 2009 from 10.6.8 to Yosemite.  Beforehand I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU. I also deleted half of my photos from the default library on my laptop, lets call it DE. I then in

    I upgraded MacbookPro 2009 from 10.6.8 to Yosemite 2 weeks ago. My iphoto is now a nightmare. i went to our local apple retailer but they could not help either. Perhaps someone can help. Beforehand the OS upgrade I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU with 50GB. I also deleted half of my photos from the default library on my laptop, lets call it DE, now with about 20GB, to gain space. I then upgraded to Yosemite.
    I have also installed since a long time Iphoto Library Manager 3.8.6. (this may be the cause of the problem as it was not upgraded and perhaps thus not compatible with iphoto 9.6 which I have now after the upgrade to Yosemite) It all worked fine before the upgrade, switching in iphoto between the two libraries DE and BU.
    It also worked fine after the upgrade for a few days. At one stage Iphoto asked me to upgrade the iphoto version as it otherwise could not read the photos when I tried to load the BU library into iphoto. I did click yes to upgrade iphoto. As a result I became a brand new but totally empty library, no photos.
    BU was still on the external disc, however the "Master" file was empty. We fortunately discovered all photos were in another file called Old Master, also under BU. We made another copy of the Old Master file onto the external disc. Lucky we did, because shortly afterwards we could not open anymore the BU file thus had no access to anything in there. Now I have 17000 photos in a file called Old Master on my external disc and another smaller library  DE on my laptop. When I tried to import the photos from Old Master into a new iphoto library it was very messy. All events dates were mixed up, many photos were imported twice. I have no idea whether all my 17000 photos have been imported.
    Can anyone suggest what is the most time efficient way? How do I best import my 17000 into a new library ensuring I don't loose any in the process. I do not wish sorting through 17000 photos for a week or so. Shall i also get a new iphoto library version now? Thank you for anything that may work.

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • Upgrade ONS15454 MSTP from 7.0 to 9.8

    Hi all
    I would like to some help that customer need to upgrade ONS15454 MSTP from version 7.0 to 9.8. So, I may need some help
    1. how to upgrade it ?a
    2. Is it possible to direct upgrade to 9.8?
    3. I saw many file information in cisco web site, and which one i must to download it ? ( ONS 15454 R9.8.0 System Software for MultiService Transport Platform, ONS 15454 R9.8.0 System Software for Multiservice Transport Platform - Lite Version for TCC2P/TCC3 -WSON) I do not know which one is to using
    4. what should i know that my card support version 9.8? In my idea, i think it should be support but i may need confirm or information from this before. (my card have OSC-CSM, OPT-PRE, AD-2C, MXP-10DME and TCCP2)
    5. Have any interrupt between upgrade ? and Is it upgrade in each TCCP2? because that may help when card reset or reboot. And the traffic still flow to another TCC2P.
    Thanks
    V

    1. I try to using your upgrade tool, my ONS15454 is SDH version 7.0  so, I can choose only 9.3 for destination version. It means that i must  to upgrade to 9.3 first and then go to 9.6 and 9.8, Correct?
    yes it is true you go directly to 9.3.0, it is not a multi-shelf node.
    please be sure that your software version is 7.0.0.
    So upgrade path is 7.0.0 to 9.3.0
    2. Is  it possible to upgrade without downtime ? as my understand that  ONS15454 have 2 site (east and west), Can i do upgrade east site before  west site? and when finish upgrade east site and go to upgrade west site  after that, can i ?
    becase as i understand when finish upgrade  per site all card in that site will reboot, so, i think that another  site will take the traffic without downtime. I don't sure that i am  correct or not if you have any mention please let's me know
    no not possible without downtime,
    there will be a traffic hit or 10seconds or less than that, it you are using MXP_MR_2.5G cards without Y-cable protection. same for GE_XP cards there will be a traffic loss for few seconds.
    yes you can upgrade east node and after that upgrdae west node, but not like doing upgrade to 9.8 for one node and another still on 7.0
    3. I don't have multishelf, i just have one shelf per site
    4.  I have plan to upgrade to customer soon, but i may need to give a plan  for them. But right now, i may confuse about the way and solution to  upgrade that include how and impact to upgrade.
    1. There will be a traffic impact on MXP and GE_XP card for less than 10 seconds.
    2. If MXP client ports are y-cable provisioned, than upgrade will be error less, in case of Y-cable protection just lock protection before proceeding to upgrade.
    3. traffic will impact as MXP cards have to do FPGA upgrade also and for this they will take a reboot, but in case of y-cable other card is taking over.
    4. As you have TCC2P card, so always select lite versions, if its SDH than SDH-DWDM.
    5. also if possible, arrange spare TCC2P card, atleast one at each site, just to be on safe side.
    6. here is the path which you have to follow:
    7.0.0 to 9.3.0
    9.3.0 to 9.6.0
    9.6.0 to 9.8.0
    also please feel free to reach for any queries.

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • Issues after upgrading the Obiee from 10g to 11g

    Hi all,
    We have recently upgraded our rpd from 10g to 11g. And a part of Webcatlog is being upgraded. We observe issues with the upgraded reports.
    As the for the report prompts the script was taking lot of time. And the browser pop's a message either to 'stop' or 'continue'.
    The report is taking lot of time to run than the usual 10g environment. And the path BP1 is also applied for the 11g environment.
    Please suggest a troubleshoot method to overcome the issues with the upgraded reports.
    Thank you,
    Chris.

    Check this pdf file
    http://www.rittmanmead.com/files/biforum2012/ranka_performance.pdf
    If helps pls mark

  • Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

    Dear sir
    I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
    Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
    And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
    Please tell me whats the matter?
    My phone serial no  86034HTCA4T
    Modem firmware  04.12.09
    Thanks

    Without contract is not the same as unlocked. The update to iOS 7 relocked
    the iPhone to the wireless carrier to which it was originally locked. You must
    contact that wireless carrier to see if they offer unlocking and if you qualify.
    If you used jailbreak or other hack to unlock the iPhone initially, the method
    used may prevent a legitimate unlock from succeeding and may render your
    iPhone unuseable.

  • I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3.  I cannot find my photos and videos.  I tried a restore, but after 3 hours, it's timing out.  Pardon my ignorance on asking this question; but is there a way to find my photos?

    I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3.  I cannot find my photos and videos.  I tried a restore, but after 3 hours, it's timing out.  Pardon my ignorance on asking this question; but is there a way to find my photos?  I do nto care about anythign else.
    Here are the steps I though I took this morning:
    Backup iPad
    Connect to iTunes and downlaod newest version of iTunes and then newest iOS
    restart Vista Laptop
    upgrade to newest iOS
    I knew somethign was wrong when it took about 6 hours to upgrade the iPad
    at the end it errored with this message error (-50), but the upgrade worked
    I was expecting to see all my photos but didn't see them
    I have tried a restore to a back up 2 times.  The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
    I tried it again 2 hours ago and same message.
    They are very valuable to me and so now I am panicking
    Your help is much appreciated

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • Hello,i have one iphone 3gs and i want it to upgrade my iso from 4.1 to 6 but now it dond wanna activate,what i can do?sorry for the language i am from romania so..

    i have one iphone 3gs and i want it to upgrade my iso from 4.1 to 6 but now it dond wanna activate,what i can do?sorry for the language i am from romania so..

    i am also having the same problem.....but there is no solution i am stil waiting for the responce of apple adviser.

Maybe you are looking for