Upgrade Authorisation Objects between 4.6c and ECC 6.0
Hello Guru's
I am in the early stages of upgrading from 4.6C TO ECC6.0 and I have worked through transaction SU25. During step 2c all of our Z Roles required editing and regenerating, during this step a number of authorisation objects appeared in the roles that I could not find within the individual profiles from SAP_NEW for each release. These objects are F_FAGL_LDR, F_FAGL_SEG, B_BUPA_RLT among others.
Does anyone know how these objects will have been added to the roles at this point in the process ?
Thanks
Simon
When you have finished the conversion of profiles to roles, during the step 2C of transaction SU25, all roles that are affected by newly added authorization checks and must be correspondingly supplemented. Edit and regenerate their authorization profiles. The system assigns the status Profile comparison required to the affected roles. (Step 2C uses a traffic light system to display which roles must be checked after an upgrade. For revised roles, the traffic light is green. For roles that have not yet been revised, the traffic light is red. You can call the report repeatedly without overwriting adjustments that you have already made).
Transaction SU25 would have produced no output for profiles. It makes sense to create the roles beforehand, in order to find out which roles authorization checks have been added for.
· Call step 2D to find out if transaction codes have been changed in the new release. You can also download this list to a Microsoft Excel sheet and then remove the old transaction codes during the test phase once the testers are satisfied with the new transactions.
Step 2D uses a traffic light system to display which roles have already been revised after the upgrade. For revised roles, the traffic light is green. For roles that have not yet been revised, the traffic light is red. You can switch the traffic light from red to green by double clicking it. You can call the report repeatedly without overwriting adjustments that you have already made.
In Step 2D, you can use the following pushbuttons to add new transactions to roles or to replace old transactions with new ones:
§ Manually adjust menu
You can manually replace or add transactions.
§ Automatically adjust menu
Old transactions are automatically replaced by new ones.
§ Automatically add menu
You can use this function to add the new transactions to each role. The system checks whether the role already contains each individual transaction. It is only added to the role if this is not the case. In this way, the users can continue using the old transactions until they have had time to learn how to use the new ones.
if may be useful rewards point are appreciated
Similar Messages
-
Differences between 4.6c and ECC
Hi,
Is there any link or website, where i can get the diferences between 4.6 and ECC 6.0 Versions. Or if there is any document on that..can anybody send me that to may mail id...
Thanks,
Ram.There are so many differences between the version in different objects
I will explain in two or more objects the difference
1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 t-code
and also there is no CIN tab in that version
but it is there in the 4.7 EE version
This is the major change from the 4.6cc to 4.7EE
2. in 4.7EE there is some settings that are related for CIN
which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
But we can do the same in the 6.0 version
These are the some of the settings that are differed in the two versions and in that two objects
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
Re: SAP version differences 4.5b, 4.6c and ECC6.0
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
. Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
A2. When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
A3. Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
A4. Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0 -
Difference in the MM functionalities between 4.6C and ECC 6.0.
Hi gurus,
What is the difference in the MM functionalities between 4.6C and ECC 6.0.
I already went through several links, which was moslty related with technical aspects.
But I need functionalitywise.
(Note: In ECC 6.0 using MIGO, transfer posting can be done. Apart from that is there any other functionality change)
It will be of great help if u provide....
cheers,
vimalHello
Following are the basic differences as far as MM Module is concerned;
Pickup list - Batch where-used list display in transaction MB56
u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
Goods receipt
Goods issue
Transfer posting
Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
New report : display list of invoice documents (MIR5)
u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
u2022 In the output list, the report shows both posted and held invoices.
u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
Requirement prioritizations in materials management
u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
Mass maintenance of outline agreements
The following two transactions available:
u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
Commitment plan for purchase contracts
u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
u2022 This commitment plan itself can have any number of items.
u2022 User can define a value and a validity date for each commitment plan item.
u2022 This enables user to pre plan different values for different periods of time.
u2022 The software generates an earmarked fund document for a defined commitment plan item.
u2022 This earmarked funds document can in turn contain several different items with different account assignments.
u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
u2022 Account assignment to a different account assignment object is then no longer allowed.
Availability check in "Enjoy purchase order and requisition"
u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
u2022 Two settings are possible with availability check:
Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
Delivery proposal - Full confirmation
External services: putting service items in the purchase order on hold (changed)
User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
Customizing transactions OX18 replaced by view
The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
Goods receipt: new movement types in inventory management
The following new movement types are available in inventory management:
107: Goods receipt to valuated goods receipt blocked stock
109: Goods receipt from valuated goods receipt blocked stock
Prepayment of invoices
This functionality is characterized as follows:
u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
u2022 When the software posts invoices, it continues to execute the standard checks.
u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
Purchasing accounting information to the former SAP Business Information Warehouse
u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
u2022 Functionality for report RMMR1MRS is enhanced.
u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
u2022 To do so, set the relevant indicator on the initial screen of the report.
Parking service items
It is now possible to put service orders without errors or with commitment errors on hold.
Report MB5B : Stock on Posting Date
u2022 This Report is available with "Non-Hierarchy" display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
u2022 This functionality is not available in Release 4.7.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
If u want to know more go through the following links
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelperp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm_
https://wiki.sdn.sap.com/wiki/display/ERP6/ERP2005+Upgrade
Regards
Gregory Mathews -
Difference between 4.6 and ECC 6.0
Can anybody tell me what is the difference between 4.6 and ECC 6.0 related to SD Module.
Hi Sunil,
. Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
A2. When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
A3. Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
A4. Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Screen diff. between 4.7 and Ecc 6.0
Hi All,
Can you please provide the list of Transaction Code, where the Screens are diff.between 4.7 and ECC 6.0 in SD.
Means as per user View, they can find the diff. of the field for the screen. like Suppose in VA01 in ECC 6.0 might be add few more fields or modify the fields...compare to 4.7.
We need as per the Client requests..
regards
PinalThere are so many differences between the version in different objects
I will explain in two or more objects the difference
1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 t-code
and also there is no CIN tab in that version
but it is there in the 4.7 EE version
This is the major change from the 4.6cc to 4.7EE
2. in 4.7EE there is some settings that are related for CIN
which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
But we can do the same in the 6.0 version
These are the some of the settings that are differed in the two versions and in that two objects
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prospective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences please refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
For Functionality Differences please refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
Re: SAP version differences 4.5b, 4.6c and ECC6.0
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prospective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences please refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
rewards if it helps
siva -
Sap table differences between 4.6C and ECC 6.0
how do i find out which sap tables has been changed between 4.6C and ecc 6.0 version. Is there a program I can run? website?
Hi,
You have to check with the Relese Notes provided by SAP for the Latest changes of the SAP versions.
But in that also, it will not be clearly mentioned by Table name, that it was changed. Only during the Upgrade of the SAP versions, all those problems will come into picture, which has to addressed and solved one by one.
Regards,
Anji -
Gereral differences between 4.7 and ECC 6.0 from FI/CO view
Hi Guys
Can any one tell me key differences between 4.7 and ECC 6.0 from FI/CO view.
In interview what i must tell?
Thank you.Please visit the following links:
[http://service.sap.com/erp]
[http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)]
[http://service.sap.com/instguides] --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
[http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf]
For Functionality Differences pls refer to the below site -
[http://solutionbrowser.erp.sap.fmpmedia.com/]
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Regards,
Ajit -
SAP HR PAYROLL DIFFRENCES BETWEEN 4.6C AND ECC 6.0
Hi,
I want to know the diffrences in functionality between 4.6c and ecc 6.0 for sap hr payroll singapore.
Regards
subbasee these:
check these links
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade for functional
https://websmp105.sap-ag.de/upgrade -
Main difference between 4.6c and ecc 5.0
Hi,
Please give me brief about difference between 4.6c and ECC 5.0
Thanks,
AshaHi Asha,
you can see in Tcode : UCCHECK .you modify the objects in unicode conversion.some functionality didn't support in ECC 5.0.
this is the brief documentation of that TCODE.
BAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
cheers,
sekhar. -
Difference between 4.7 and ECC 5/6
Hi Friends,
I am ABAP developer and would like to know the differences between 4.7 and ECC 5.0 and ECC 6.0 from a techincal perspective. I appreciate if you differentiate between each of them or 4.7 and ECC 5.0.
Regards
PrakashDear Prakash,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details -
Difference Between 4.6B and ECC 5.0
Hi All-
I would like to know the diffrence between 4.6B and ECC 5.0 Technically...
Can anyone please mention few main differences Technically?
Thanks,
Sony4.6B is R/3 based, while ECC 5.0 is NetWeaver based...Object Oriented programming is more solid and completed on ECC 5.0...TABLES parameters are no longer supported in FM on ECC....
Greetings,
Blag. -
Defferenes between 4.6c and ECC 6.0
Hi groups
Please provide some documentation regarding technical differences between 4.6c and ECC 6.0 (if possible presentation/ documentation).
It's urgent..
Thanks and regards
badriCheck the link http://service.sap.com/erp
Then you can check http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
There are some overview documents, that may be useful for you. Will let you know if i get something extra.
These are the other major differences:
Adaptability:
New collaboration options
Financials supply chain management
New general ledger
RFID enabled scenarios
Internet sales
Product Modeling
Performance management
Flexibility :
Open technology platform
Guided procedures Adobe® forms
Knowledge management Portal
Mobile scenarios
Business information warehouse
Business process management
Insight :
Analytics
Strategic Enterprise Management
Corporate governance
Sarbanes-Oxley
Productivity :
Roles based functionality
Self Services -MSS / ESS
Travel Management
E-Recruiting / Learning
Self Service Requisitioning
There are many obsolete statements which make a difference in 4.6 and ECC 6.0.
check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb32e2358411d1829f0000e829fbfe/content.htm
Regards
Vasu -
Pls let what are the differences between 4.7 and Ecc 6.0.
Hi all,
Could you please let me know, we are going 4.7 to Ecc 6.0.
Pls let what are the differences between 4.7 and Ecc 6.0.Try the [Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx].
Regards -
What are the differences between 4.6B and ECC
What are the differences between 4.6B and ECC ?.
ThanksRefer a similar post /message/1783778#1783778 [original link is broken] and my reply there in
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
Here are the Links
for SAP ERP Central Component 6.0
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
for 4.7 SAP R/3 Enterprise
http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
and for Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
You can pick up the similar Release Notes for any version you are interested in -
Difference Between 4.7 and ECC 6.0 in case Of Travel mgmt.
Hi guys,
Please let me know what is the main difference between 4.7 and Ecc 6.0 in case of Travel management.
ThanksHi Pulla,
We use R/3 4.7 version for Travel Management (FI-TV) with fairly good features but the latest version ECC 6.0 which is Enterprise Central Component version 6.0 gives you the opportunity to use ESS/MSS ie, using portal to create the trips/claims as against interfaces.
Therefore one difference would be to get the work done easily by logging into a internet site and complete the trips/claims which in turn updates your database tables where as in 4.7 there is no such functionality to use portal to make an expense claim.
There might be other feature enhancements available in 6.0 which I am currently unaware of but surely SAP gurus in this forum will be able to provide more on that.
Hope the above provides more info.
Rgds
CONMJI
Maybe you are looking for
-
Mod_oc4j and load balancing
Load balancing is not working :( I have 2 servers with OAS 10.1.2.0.2 They are joined to DCM-Managed cluster. Users access web app on the first server. This server has mod_oc4j.conf: <IfModule mod_oc4j.c> <LocationMatch "/j2ee/.*/Spy"> Order deny,all
-
No ttJdbc in java.library.path
Hi, I am getting following error while starting JBOSS which is pointing to timesten (java.sql.SQLException: Problems with loading native library/missing methods: no ttJdbc in java.library.path) I have set LD_LIBRARY_PATH /u01/app/oracle/product/10.2.
-
HT1620 How to backup in different iClound address
How to backup contact, photo, notes, mail, calendar to different iClound
-
Updating problem - Apple of Death - An answer (perhaps)
I have discovered that the ONLY way to update without my phone dancing to the Apple of Death is to unplug all usb hubs and hardware leaving only phone and keyboard/mouse connected. Hope this helps..... Message was edited by: jakdor
-
Mark a podcast as watched/listened
Is this possible in the Nano? Usually there is exit music or blabs that they go on about and if I don't listen all the way to the end, it won't auto-delete when I sync.