Upgrade before restore of time machine??

I recently had a new hard drive installed by an Apple approved tech guy.  He left after starting the installation of the OSX and now I need to figure out the time machine thing.   I had Mountain Lion before the new drive and I am back to Snow Leopard.  Do I need to upgrade back to MLion BEFORE I do a restore with the time machine???  

Just do a TM restore.
http://pondini.org/TM/14.html

Similar Messages

  • Do I need to remove Bootcamp Partition before restoring with Time Machine

    Hello - anyone familiar with this scenario.
    I have used TIME MACHINE from the very first day I had my iMac.  So it was started almost immediately after the initial boot of a brand new iMac case I ever needed to restore my Mac to that initial Day 1 state.
    That day has come, but it's now two years, and in that time I have installed BOOTCAMP, Parallels and Windows 7.  That process created another partition, and created the required 'links' between my OSX and Windows via Parallels etc.
    So my question is this - can I do a 'Restore from Time Machine' over the top of the new partioned set up of my iMac OR  or will it be now totally confused because of the changes I have made to my system in that time, and do I firstly need to remove Windows, Bootcamp, and erase the partitions I created back to one.
    So in summary - will Time Machine do this when it restores, or do I need to do it before I restore?
    I also have a CARBON COPY CLONE from Day 1 too.  Am I better using that instead - and if so, same question - will i need to remove Windows, and my Bootcamped partion first?
    (My system is iMac late 2012 still running OSX Mountain Lion if that makes any difference)
    Thanks

    popsynic wrote:
    Hi - thanks for responding
    "Is Parallels using the BC partition as a VM, or is it a separate VM with its own virtual disk?"
    I don't know - basically I have a BOOTCAMP partition and Windows is installed on that (using these instructions from the Parallels website)  I can then either open up Windows from in OSX Moutain Lion while keeping my mac running (and windows will run in its own little window - but within OSX.  OR I can also choose to boot dircetly wi windows when I tuen on my MAC - and then it runs independently of my OSX.
    You are using the BC Windows and running it as VM. There is no separate VM with virtual disk.
    "Are you planning to erase the internal drive(s)?"
    I wasn't sure  - I want to restore my iMac like it was on the day I had it, before I partitoned BOOTCAMP and installed windows.  So my question is, will the TIME MACHINE restore get rid of WINDOWS and the BOOTCAMP partition for me as part of its restore - or do i have to that, and then restore using Time Machine
    It is much simpler to run BC Assistant and use the last option - "Remove Windows". It is a bit cleaner.
    "If the backup on TM which started on Day 1 has continued as you have made changes, including BC/Windows/Parallels, it has continued to backup OS X and partition information. I suggest you backup Windows using Windows Backup to a separate external drive formatted as NTFS, and also consider Winclone or CampTune for a OS X compatible BC backup, if you run into any issues."
    As above, I am not bothered about keeping Windows or the BOOTCAMP partition, I want to resore my iMac to the DAY 1 status - when I did my first full Time Machine backup - which was before I created a Bootcamp partition or installed Windows.
    I suggest removing Windows via BCA and backing up to Time Machine. You will keep you OS X intact and keep all your files on the OS X side.

  • Cannot restore from Time Machine since upgrade to 10.7.3

    I am using a Mac Mini (Mid 2010) using the 2nd HD for backups of Time Machine.
    Yesterday, the Mac could not start up and always stop at the First Aid panel (which contains i) an option for restoring from time machine, ii) reinstall Lion, iii) help online ...  Whenever I choose restore from backups, the Mac was frozen at the multiple language choice panel.  So, I have to reinstall OS Lion.  It's successful.  Then I restore from backups in 2nd HD and the strange thing happens.  It doesn't matter what version of backup I choose, it appears that the contents in my wiki is updated only to March 2012.  When I browse the Time Machine, it's really a surprise that I update 10.7.3 by the end of March 2012.  Since then, despite the fact that the backups run regularly and backups versions appear in Time Machine, the contents of my wiki (which is added and modified everyday) are not updated.  All backups under 10.7.2 are okay.
    Can anyone know about this problem?
    Best regards,

    Well, I know about the problem but do not know a solution I am afraid. I had the same problem where the wiki, calendar and addressbook were a couple of months old after a restore from time machine two weeks ago. I did not relate this to the upgrade to 10.7.3, but that could easily be the case. I never did time machine restores before.
    I was able to restore calendars from client side time machine backups (a lot of work), but the wiki I could not restore to an up-to-date version. My guess is that files were restored correctly, but not the postgresql databases. So I started to make daily backups from postgresql myself now. This post helped me with that:
    https://discussions.apple.com/message/17008934#17008934
    Another thing I started doing was creating a bootable clone on a usb disk with carbon copy cloner, which is incrementally updated twice a day now.
    But I hope that Apple will fix this in an upcoming update. I would be nice if you could rely on Time Machine backups.

  • HT201250 I recently replaced my 2009 Macbook Pro's hard drive.  I had the Apple store upgrade the OS to Mountain Lion while it was being repaired.  I want to restore all of my old files and data, if I restore from Time Machine, will it revert to the old O

    I recently had to replace my 2009 Macbook Pro's hard drive.  I had the apple store upgrade the OS to Mountain Lion while it was in being repaired.  I want to restore all of my old data and files.  If I perform a restore from Time Machine, with a date prior to having the hard drive replaced, will it revert back to the old OS?

    No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
    App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
    After you restore from TM, check HD > Incompatible Software

  • Can't restore from time machine after SSD upgrade

    Macbook Pro 13" mid-2009, 10.7.5 Lion
    I just swapped out my 160GB  HDD with a 250GB SSD on my MBP. When I booted up, I pressed Command-R to try to get into recovery mode but all it does was showing a gray folder with a question mark on it.
    I had previously backed up my HDD with time machine. My original HDD is no longer available because I tried to upgrade to Mavericks (since the command-R was not working) and upon restarting my MBP was locked with system pin code (that is another nightmare all by itself)
    What are my options besides getting a 10.7 Lion CD from the apple store and try to boot it up that way? and then restore from time machine?
    Any other way I can get into receovery mode?
    Thanks (My MBP is now a brick sitting on my desk)

    It's a bare drive so it isn't formatted and it doesn't yet have a Recovery HD installed on it.
    Your computer originally came with a version of Leopard installed. You can reinstall it if you still have the original discs that came with the computer. Or, if you have a retail Snow Leopard DVD you can reinstall Snow Leopard from which you can then upgrade to Mavericks (Lion is no longer available for re-download.) It's unlikely your local Apple Store has a Lion USB flash drive or DVD although you can certainly make an appointment and ask for their help.
    You should see if you can boot from the Recovery HD invisible image in your Time Machine backup drive. Connect it to the computer and use OPTION boot to get the boot manager. If you see a Recovery HD on your backup drive displayed, then boot from it.

  • Help Upgrade to Maverick fails - now unable to restore from time machine as well

    Hello,
    I have an iMac (2008) which was running snow leopard. The App store reminders to upgrade for free to Mavericks got me today and I decided to go with the upgrade. After the down load of the s/w and while rebooting, it prompts for user id and password.
    My iMac has always had an user id and a password. But strangely it would not accept the valid password for the user id. I have retried it several times and it will not accept the password. Not knowing how to proceed, I wanted to revert back.
    So I pop in the Snow Leopard bootup DVD and when it starts, I connect to my wifi and choose utilities to perform a time machine restore. The backup was done just prior to my upgrade to mavericks. I am able to mount my external network storage and locate the time machine backup and choose the disk to restore to and the process starts and after a few minutes it aborts.
    There is a log file that is shown - but the contents are not easily understood.
    Now I have and iMac that is not functional. I am looking for some help.
    I would be open to installing Mavericks from scratch - but I do not have the bootable USB. I would like to use my network drive and use that to start my computer with Mavericks and then possibly extract the data from my time machine backup. I am hoping that the restore of my data files / pictures / documents etc can be restored from time machine.
    Any ideas how I can proceed from here? Thanks in advance.
    ifmx4ever

    MichelPM,
    Have been offline all along. I resorted to your advice and went with installing Snow Leopard on the external hard drive booting the system on that.
    I first tried recovering my Time machine backup - but did not work. So I ended up installing Mavericks on the internal hard drive on my iMac first. Then I was able to connect to my Time machine backup and restored all my data and documents. I chose not to recover the applications. The only useful app that I used was office for mac 2011. I went to microsoft's website to do a fresh install of office for mac 2011 and I am back in business.
    Overall a painful way to get an upgrade done. On to my next task - preparing a bootable drive with Mavericks and to back up on Time machine.
    Thank you for your suggestions.
    ifmx4ever

  • During upgrade to Lion on Macbook Pro the upgrade stops at OS utilites after rebooting asking to restore from time machine backup or install new copy

    My Daughter is currently upgrading her MacBook Pro to OS X Lion.  During the upgrade the system rebooted and then stops at the OS X Utilites menu.  I have installed this same upgrade on My MacBook Pro and the family iMAC without issue.  Did the upgrade encounter a problem?  The only options are to Restore from Time Machine Backup, Reinstall Mac OS X, Get help, or Disk Utility.  
    I'm not sure how recient the backup is on the TimeMachine for her system and she is concered that she may loose a lot of updates she has made to iTunes and iPhoto.  
    Please help.

    I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.

  • Should I upgrade to Mac OS X v10.7 before I use Time Machine for the first time?

    I bought a macbook pro in 2008. I recently purchased an external hard drive and I can't decide what's the best option:
    1. Use Time Machine using Snow Leopard 10.6.8 ?
    2. Upgrade to Lion before I use Time Machine (first time)
    3. Or just drag my photos and music manually (those are the only things I need to back up)
    Thoughts?

    I see. My only fear is there seems to be a lot of people who orginally were using Time Machine on SL, then upgraded to Lion and now Time Machine becomes screwy.
    Also, if I buy a new Mac (eventually) with Lion, I worry that if I've been using TM on SL, the transition to Lion wont be smooth. I may be overthinking this, but I just want to get it right.
    But I see your point: I need to get a full back up of my system as it is now before I make any changes. Thanks for your help.

  • Lost mail rules when upgrading to ML, can't restore from time machine

    Hi,
    I've installed mountain lion and restored from time machine and mail rules were not there. There's only news from apple.
    I tried to restore the rules myself (MessageRules.plist and MessageRules.plist.backup) but when opening mail rules were not there yet. Nevertheless, i can add rules manually, so if there was a way of looking at the past rules I could just copy them (though it's not the best way).

    My rules are still there, so perhaps Apple support speak with resource forked tongue.
    Comparing an old (pre ML) rules file from 20th June with the ML one, the differences are:
    The file name was: MessageRules.plist, the ML one is SynchedRules.plist. Both are in my V2 folder, but the old Rules have been copied (by Mail, not me) into the new SynchedRules file.
    In the old file, for each item (Rule) the first line was Active (Key) String (Type) 1 (Value). In the ML file, this line is no longer there, so the first line is AllCriteriaMustBeSatisfied.
    You can see these differnces in the "preview" part of Finder Show Info, if you have the two files to compare.
    Thus, just copying and renaming the old Rules file probably won't work, because of this difference. Mail probably just makes a new file because the copied file isn't as expected. It should be possible to edit the old plist file to remove the "Active" line, and rename it to SynchedRules.plist (but see below). The top is slightly different, just below <dict>, as this relates to the Active line. There are a  couple of lines at the bottom that aren't in the new file.
    The "Active" line that has gone is now in a file called RulesActiveState.plist. This file is just a list of RuleIds from the SynchedRules.plist (like this:
    AC6F6611-FF61-4AA6-9682-BA100EFAC233)
    Doing this does sound rather tedious, but might be quicker than manually re-entering blocked email addresses etc. to replicate old rules. As plist files are in xml format, it should be possible to use a text editor to delete the unwanted "Active" line from the message rules list by Find & Replace All (with nothing). All this could then be copied to the "SynchedRules.plist. You would need to copy the RuleIds into the RulesActiveState.plist as well.
    Make a copy of the files first just in case...

  • Late 2011 Macbook Pro wont upgrade to Mavericks or restore from time machine backup

    I recently tried installing Mavericks on my MBP, but during the installation, it will hang up and restart. I then tried to restore with time machine, same issue. I have used check disk and repair, no issues. I have a boot camp partition on the hard drive as well. When mavericks first came out, I tried to install with the same issues, and I remember recieving an error saying core services couldnt be found. I was able to restore from time machine then.
    I have cleared the PRAM, repaired the hard drive, attempted a clean install from a bootable usb, and re-install the OS from the recovery partition with no results. At this point, the mac is a aluminium paper weight.

    I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.

  • How to restore from Time Machine WITHOUT install discs using a second Mac

    It's a question that is asked repeatedly all over the web by Mac users like me that bought in to Time Machine (TM) on the assumption that if their computer died one day it would be a piece of cake to restore from it, only for that day to come and then to be told "ahh, okay the first thing is to get your computers install discs..." (loud crashing sound of world falling around ears).
    I've never been able to afford a new Mac and both of my machines were bought second-hand. Neither came with Leopard (both have Tiger and have been upgraded to Leopard via the net). This was never supposed to be a problem as I've been backing up with TM. However it appears that Tiger discs are as much use as an inflatable dart board when it comes to using TM. So I've been faced with the possibility of having to spend £130 (about two hundred Pres Sheets, Yankees) on the Leopard install discs just so that I can have the option of restoring from TM. Bonkers.
    However after much nashing of teeth, a very long weekend learning all sorts of things about 'Target Mode', 'Single User Mode', 'Verbose Mode', 'Open Source 9' etc the following solution has worked without the need to go out and buy those over-priced discs...
    What you will need:
    1 broken Mac requiring restoration
    1 second donor Mac running Leopard (or Snow Leopard so long as the broken Mac can run it)
    1 firewire cable with the correct fitting at either end to attach both Macs together
    1 Time Machine backup
    Note: The following is for when you have given up trying to boot from your hard drive. In my case I couldn't boot in to Safe Mode etc. so was forced to format my drive and re-import everything. If you've read this far I'm assuming your at the same point as well and have tried everything else that's out there first.
    Also - both my Macs are Power PC's so can't run Snow Leopard, so I can't say 100% this will work with SL (Intel) machines. From what I've read Snow Leopard will work with this procedure too, but if you've found differently please feel free to add your experiences below...
    STEP ONE: Format the corrupt Hard Drive or replace with a fresh HDD
    *Link the two computers with a firewire.
    *If you're replacing your HDD, remove your corrupted hard drive from the 'broken' machine and insert a new one.
    *Power up the broken Mac whilst holding down the 'T' key. This will start it up in Target Mode and you'll get a nice firewire symbol floating around that machine's screen.
    *Power up the second 'healthy' Mac. This will be our 'donor' machine. When it starts up after a few seconds you will see the hard drive of the broken Mac appear on the donor Mac's desktop.
    *Using your donor Mac's 'Disc Utility', format the broken Mac's hard drive (now's the time to partition it etc. if you want to).
    STEP TWO: Clone your donor Mac
    Your broken Mac is no longer broken and now needs a new OS. But you don't have the discs, right? Well get this... you can clone your donor mac on to your machine, even if they are totally different i.e. a laptop on to a tower.
    *Again using Disc Utility, click on your donor Mac's hard drive. The restore tab appears as an option.
    *Click on restore and drag the donor Mac's hard drive that contains the operating system in to the Source box.
    *Drag the newly formatted hard drive on the broken Mac in to the Destination box.
    *Click restore. Your donor Mac's hard drive will now be 'cloned' on to your no-longer-broken Mac. Once this is done, eject the first Mac's hard drive from your donor Mac's desktop. You no longer need the donor Mac.
    Ta daa! Your machine now starts up happy and smily again. Time to restore all that stuff that's been sat on your Time Machine drive...
    STEP 3: Restore from Time Machine using Migration Assistant
    This is the really clever part that prompted me to write this piece in the first place. Time Machine IS accessible without those Leopard install discs you don't have. You need to use something called 'Migration Assistant'.
    *Start up your machine as normal and you'll see it is an exact clone of the donor machine. Weird huh?
    *Attach your Time Machine hard drive. It will show up as an icon on the desktop and because of it's size, you'll be asked if you want to use it as a Time Machine backup. Err, NO YOU DON'T! Click 'cancel'.
    *Open Migration Assistant (if you can't find it just type it in to Finder and click). There are three options, the middle one being to restore from TM or another disc. Yup, you want that one.
    *Migration Assistant will now ask you what you want to restore in stages, firstly User Accounts, then folders, Apps etc. It will even import internet settings
    And that's you done. Let Migration Assistant do it's thang... altogether I had about 140gb to restore, so it wasn't exactly speedy. This wasn't helped by the fact that my TM hard drive is connected via USB (yes, I know). Just leave it alone and it'll whirr happily away...
    Before I go - you don't have an option of when to restore from, and will restore from the last Time Machine save. At least then you should be able to access TM and go 'backwards' if you need to.
    Also - for a Mac expert, the above will be up there with 'Spot Goes To The Farm' in terms of complexity. However, for the rest of us the above is only available in fragments all over the net. By far the most common response to 'how do I restore from Time Machine without install discs' is 'you can't'. If I'd found the above information in one place I could have saved a lot of hair pulling and swearing over the last couple of days, so forgive me for sharing this workaround with the rest of the world. Meanwhile your expertise will come in very handy for the inevitable questions that will get posted below, so please feel free to help those people that won't be sure if this solution is the right one for them. I'm no expert, I just want to help people that were stuck in the same situation (and looking at the web, there's a LOT of them).
    Hope this is of use to someone, thanks and *good luck*!

    Most maintenance and repair, restore and install procedures require the use
    of the correct OS X install DVD; be it an original machine-specific restore/install
    disc set or a later retail non-specific general install disc set.
    By having an unsupported system, perhaps installed via an illegal download or
    other file-sharing scheme, where no retail official discs are involved and the
    initial upgrade was done by other means outside of the License Agreements,
    you are asking us to discuss a matter of illegal installation and use of a product.
    There are no legal complete OS X system download upgrades online; only bits
    that are update segments to a retail or as-shipped machine's original OS X install.
    +{Or an installation where a previous owner had correct retail upgrade discs, &+
    +chose to not include them with the re-sale of the computer it was installed in.}+
    However, to answer the initial question. To get and use an externally enclosed
    hard drive in suitable boot-capable housing, and get a free-running Clone
    Utility (download online; often a donation-ware product, runs free) you can
    make a bootable backup of everything in your computer to an external HDD.
    This is the way to make a complete backup to restore all functions to the computer.
    The Time Machine has some limits, in that it can restore only that which it saves.
    It does not make a bootable clone of your entire computer system with apps and
    your files, to an external drive device. A clone can. And some of the clone utility's
    settings can also backup changes to an external drive's system; if that other drive
    is attached to the computer correctly.
    Carbon Copy Cloner, from Bombich Software; and also SuperDuper, another of
    the most known software names you can download and use to clone boot-capable
    system backups of your computer's hard disk drive contents, are often cited.
    However you resolve the matter of the running OS X system in your computer,
    derived from what appears to be questionable means, is part of the initial issue.
    Since you do need to be able to fix an existing installation by unmounting the
    computer's hard disk drive and run the computer from the other (install disc or
    system clone) while it is Unmounted; and use the correct Disk Utility version to
    help diagnose and perhaps be able to fix it. You can't use a Tiger version Disk
    Utility to fix a Leopard installation, and so on.
    So, the situation and replies as far as they can go (since the matter does
    constitute an illegal system, if it was arrived at without correct discs) is a
    limited one. And file sharing of copied Mac OS X (and other) software is
    also considered illegal.
    And, one way to get odd malware and unusual stuff, is to get an unauthorized
    system upgrade from an illegal source online. You never know what's inside it.
    The other reply was not a personal attack; the matter is of legal status and as
    you have a product with a questionable system, the answer is to correct it.
    And if you want to save everything in your computer, make a clone to a suitable
    externally enclosed self-powered boot capable hard disk drive. With older PPC
    Macs, that would best be to one with FireWire and the Oxford-type control chips.
    However that works out...
    Good luck & happy computing!

  • Imac won't restore from time machine backup after HD (hard drive) recall replacement

    I have an imac bought in 2011, running Snow Leopard.  It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday.  Before the guy left he started a backup/restore from my latest time machine backup set.  It failed.  I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again.  No luck.  I called the guy back and he told me to call Apple Care.  Not thrilled about that response since the guy had just left my house I did what he told me to do.  (A quick sideline here:  I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't.  It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same). 
    Back to the issue.  When I called apple care they pretty much had me try the same thing again with an earlier back up set.  To my knowledge, it didn't work.  I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install.  (The boot disc is still in the imac).  When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart.  So, I tried something else.  I tried to re-install the snow leopard OSX without using the restore function.  That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup.  The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac).  I again stepped away from the computer so it could do its thing for two hours.  When I returned, I was back to the MAC OSX screen that asks you to choose a language.  There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc.  When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from.  I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject?  I also initially assumed that the backup had somehow failed again and triggered a restart.  I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use.  I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set).  So, I almost tried the "select time machine backup" option again until I looked at my HD space.  Clearly, there is space that has been used.  HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK!  I have not called Apple Care back because quite frankly they were useless the first time.  I have a call into the repair guy but who knows how much help he will be.  In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
    A few other notes:  I use Time Machine Editor to run my backups weekly.  It was set up that way from the get go by an Apple rep who came to my house to get us up and running.  Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning. 
    One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted.  Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it. 
    If you can help me, I would be eternally grateful!  I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed.  Did I mention this was supposed to be EASY?
    I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it.  I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one. 

    I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive. 
    This is Apple's explaination as taken from their web page.:
    Restoring your entire system from a backup
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
    Note: If "You can't restore   this backup because it was created by a different model of Mac" appears  when restoring  a backup that was  made on a different Mac, follow the onscreen instructions.
    I even posted this information on the community and apple removed it... because they don't like the:
    Off-topic or non-technical posts
    Non-constructive rants or complaints
    But here is my experieince:
    Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
    Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
    Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
    4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
    So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
    I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on.

  • How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?, How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?

    I have never done this before, so can someone explain in detail how I reintall my system software and then restore from Time Machine please ?

    Your profile indicates that you currently have an older version of Snow Leopard (10.6.2).  In order to install Lion, a prerequisite is the latest version of Snow Leopard (10.6.8).  Perhaps a few more details would be helpfull in solving your problem. ex. If all you want to do is to upgrade to Lion, a restoration of data is unneccessary.  Download the latest version of Snow Leopard and then download (purchase) and install Lion.  User data will remain intact.
    If I am missing something, please elaborate.
    Ciao.

  • System Restore from Time Machine Back up and Mail

    Hi
    I have around 16,000 Messages in my Mail 3.2 Inbox. I use Gmail IMAP service. One thing I like about Mail is that next to all my messages there are these arrows that indicate whether I have replied to or forwarded a particular message and clicking on them takes me to my response to a particular email.
    I need to reformat my MBP HD and want to do a system restore through Time Machine.
    My question is, will Mail return to my current state (with all the arrows and tags) after I do the complete restore from Time Machine.
    Any help on this is highly appreciated.
    Cheers!

    Mheck21 wrote:
    I replaced the internal because I need more space, I'm not an expert, but I've done it before. I wasn't having trouble I was just running out of room and decided to upgrade?
    Ah, ok, that rules that out.
    I think it wasn't backing up because it was showing I had files on the external but I couldn't locate them. It's my understanding that the external must be blank to back your computer up with time machine.
    No, it doesn't have to be empty (although Time Machine works best if it has its own, exclusive space).  Without the error message(s), we don't know what is/was wrong.
    I have run the Verify Disk on the internal and it says its all good.
    Ah, good.  That means you don't have directory problems.
    I have not run a Repair Disk Permissions. I am not sure how to do that? Is that also located in the Disk Utility.
    Yup, same window, different button.
    I tried to just run the update from the update software option in the apple on the top left. I also then ran the combo that I downloaded from the apple site.
    With what results?  Did they compete?  If not, what message did you get?

  • Restore from Time Machine / Migration Assistance Utility

    Sorry if this is obvious, but just want to restore wo further user complications.
    _Back story:_ 2006 iMac running Snow Leopard won't boot. Genius Bar determines HD needs reformatting. Reformats and installs OS v10.5.7, not Snow Leopard. Explained to follow new setup and when prompted select from Time Machine (external HD) and restore. At home I do, it won't. Everything is recognized (External HD, Time Machine, File), but tells me OS on machine older than Time Machine files and to upgrade iMac (and can try again from Migration Assistant Utility).
    Continue with prompted new setup and created User Account. iMac now ready and like new. Installed Snow Leopard. Run Migration Assistant Utility and select restore from Time Machine.
    Issue: External HD recognized by iMac but not by Migration Assistant Utility. Only selection choice is internal HD. Additionally when connecting external, always get prompted (separate prompt from Migration Assistance) if I want to setup Time Machine and I've been declining. Do I have to set up Time Machine before? It didn't require that when doing new user setup.
    Thanks for any and all assistance.

    Chad Krukowski wrote:
    Than you! that is what I wanted to do, a full restore. Unfortunately was following the direction of the genius bar.
    Yup. The Geniuses (like most Apple folks) don't actually use Time Machine on their work computers, and aren't real familiar with it, so this sort of thing isn't all that unusual, unfortunately. You could even have gotten similar advice from AppleCare, depending on the expertise of whoever you happened to get. Sigh.

Maybe you are looking for