Upgrade BI 3.5 to 7.0

ERROR:
SEVERE ERROR: error 10 during start of RSUPGCUAGEN111
BATCHJOB RSUPGCUAGEN111 FAILED
SEVERE ERROR: calling CUA GEN failed - repeat phase
Log File:
1 ETQ201XEntering upgrade-phase "JOB_RSUPGCUA_TBUPG" ("20070621104627")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_mss_schema=bcp
4 ETQ399 auth_shadow_upgrade=0
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ010 Date & Time: 20070621104627
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ230 Starting RFC Login to: System = "BCP", GwHost = "Irving", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="BCP", Nr="00", GwHost="Irving", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "10")
2EETQ261 Start of batchjo
For the above Error. I have found the solution below:
Please try to logon with DDIC user in client 000 of E02 system on host 'sapdev30' instance 00 ? Is the logon ok?
If so, you may stop the SAPup program and then inform the password of DDIC once again to sapup with the command 'SAPup set DDICpwd'
Afterwards, repeat the phase.
Can anyone explain How to implement above Solution.

HI,
"dev_disp",
trc file: "dev_disp", trc level: 1, release: "700"
sysno 77
sid BCP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 3044
Tue Jul 10 10:57:02 2007
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (77 3044) [dpxxdisp.c 1237]
 shared lib "dw_xml.dll" version 75 successfully loaded
 shared lib "dw_xtc.dll" version 75 successfully loaded
 shared lib "dw_stl.dll" version 75 successfully loaded
 shared lib "dw_gui.dll" version 75 successfully loaded
 shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Tue Jul 10 10:57:06 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >Irving_BCP_77 <
DpShMCreate: sizeof(wp_adm) 11264 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06E40040, size: 4646328)
DpShMCreate: allocated sys_adm at 06E40040
DpShMCreate: allocated wp_adm at 06E41E40
DpShMCreate: allocated tm_adm_list at 06E44A40
DpShMCreate: allocated tm_adm at 06E44A70
DpShMCreate: allocated wp_ca_adm at 07213D10
DpShMCreate: allocated appc_ca_adm at 07219AD0
DpShMCreate: allocated comm_adm at 0721BA10
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0729C8D0
DpShMCreate: allocated gw_adm at 0729C910
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0729C940
DpShMCreate: allocated wall_adm at 0729C948
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 894 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12237]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( Irving) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >Irving_BCP_77 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Tue Jul 10 10:57:07 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Tue Jul 10 10:57:46 2007
ERROR => W0 (pid 3988) died [dpxxdisp.c 14241]
ERROR => W1 (pid 3208) died [dpxxdisp.c 14241]
ERROR => W2 (pid 852) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x1f --> 0x1e
ERROR => W3 (pid 3680) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x1e --> 0x1c
ERROR => W4 (pid 3480) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x1c --> 0x18
ERROR => W5 (pid 192) died [dpxxdisp.c 14241]
ERROR => W6 (pid 1372) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x18 --> 0x10
ERROR => W7 (pid 1992) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 10 10:57:56 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Jul 10 15:57:56 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3988 Ended no 1 0 0
1 DIA 3208 Ended no 1 0 0
2 DIA 852 Ended no 1 0 0
3 UPD 3680 Ended no 1 0 0
4 ENQ 3480 Ended no 1 0 0
5 BTC 192 Ended no 1 0 0
6 BTC 1372 Ended no 1 0 0
7 SPO 1992 Ended no 1 0 0
Dispatcher Queue Statistics Tue Jul 10 15:57:56 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Tue Jul 10 15:57:56 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Jul 10 15:57:56 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 10 10:58:01 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >Irving_BCP_77 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (424) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:424 HANDLE:1636)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 10 10:58:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:424 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >Irving_BCP_77 <)
NiIMyHostName: hostname = 'Irving'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Jul 10 10:58:03 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1600 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1600 (pos=2)
SiSelNRemove: removed sock 1600
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1600
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3044) [dpxxdisp.c 10259]
Good Bye .....
dev_w0 LOG FILE
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Jul 10 10:57:07 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 77
M sid BCP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3988
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3988) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11264 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07640040, size: 4646328)
M DpShMCreate: allocated sys_adm at 07640040
M DpShMCreate: allocated wp_adm at 07641E40
M DpShMCreate: allocated tm_adm_list at 07644A40
M DpShMCreate: allocated tm_adm at 07644A70
M DpShMCreate: allocated wp_ca_adm at 07A13D10
M DpShMCreate: allocated appc_ca_adm at 07A19AD0
M DpShMCreate: allocated comm_adm at 07A1BA10
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 07A9C8D0
M DpShMCreate: allocated gw_adm at 07A9C910
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 07A9C940
M DpShMCreate: allocated wall_adm at 07A9C948
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host Irving
M
M Tue Jul 10 10:57:08 2007
M calling db_connect ...
C Thread ID:2972
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on IRVING
C CopyLocalParameters: dbuser is 'bcp_shd'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C Provider Release:08.10.1830
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C CheckCodepageType: line 24189. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24189]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 500 dynamic statements (2844000 bytes), total 34364068 bytes
C Initializing shared procedure name cache IRVING_BCPBCP_BCP_SHD_MEM.
C procedure cache created/attached
C PSP: 0 procedure names registered
C Connected to db server : [IRVING] server_used : [np:(local)], dbname: BCP, dbuser: bcp
C pn_id:IRVING_BCPBCP_BCP_SHD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070710 105708 IRVING
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 12849]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##YsIRVINGbcp00000039880000000001105708]
C sloledb.cpp [ParamStmtExec,line 12849]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##YsIRVINGbcp00000039880000000001105708]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112300
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##YsIRVINGbcp00000039880000000001105708>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##YsIRVINGbcp00000039880000000001105708>
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server Irving_BCP_77 on host Irving (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Jul 10 10:57:08 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3988) [dpnttool.c 327]

Similar Messages

IPod no longer works with car stereo since upgraded MBA & iTunes

My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
You can try to blow it clean, if you have a can of compressed air or gas.
Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
The Reset sequence may send a signal to the Car stereo to do the right thing

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Ipod touch can no longer connect to XP following Apple upgrade, HELP !

This is a nightmare. My son has an ipod touch (8gb)purchased a couple of months, and it's been fine until a couple of days ago. I downloaded some music for him, and just about to synch when Apple informed me on itunes of a software upgrade, so naturally I did this. However, it could not complete it saying there was a problem installing the hardware. The ipod then had a permanent picture of a usb cable pointing towards the itunes logo. Itunes no longer recognises this ipod or my own ipod as a device.
I'm not a techhie expert, but I generally know my way around computers, however I could not resolve this.
I called the Apple technical support desk, where I spent 1 hour 45 minutes with 2 different advisors who could not resolve this. We installed and re-installed various components from drivers to itunes to anti virus software, however nothing could change. There was simply no recognition of the ipod at all when connected.It does give a pop up message to restore the ipod, however you can't actually click on the restore button because to have to get rid of the pop up message first, then the screen with the restore facility disappears.
Windows xp is continually popping up a message saying " FOUND NEW HARDWARE WIZARD There was a problem installing this hardware. Apple Mobile USB driver. An error occured during the installation of the device. The system cannot find the file specified."
You then have to click on finish, however the message keeps coming back. We kept going round and round in circles with the technical support people, where it was left that I should start removing programmes on my computer to see if any of those are causing a problem. I have had the same spyware for the last 12 months now and never had a problem before, nor any other programmes.
I booked a genius appointment at my local Apple store today where the assistant reset the ipod to factory settings so it could at least work. I explained the situation, however 15 minutes was never going to be long enough to look into it, and a restore was all they did. Obviously all of my programmes were lost, however when I got home and plugged it back into the computer again, it could not be recognised by itunes and i got the same pop up message. Luckily we have not spent alot on downloads, however my son has lost his music now and it cannot be connected or upgraded. It's under guarantee however a software upgrade by Apple has totally messed my computer up. I really don't know who to turn to now as both the service support and store has not rectified this, something I feel has been caused by Apple.
Any advice is appreciated. Thanks

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Just upgraded HDD, now how do I get my data back??

I just upgraded my stock 60GB HD to a 120GB Seagate Momentus 5400 ($100). This is what I did:
1. Before removing the 60GB HD, i created a read-only disk image of my HD(with Disk Utility on the OSX install CD). I put this disk image on my USB external hard drive.
2. Physically replaced the 60GB with the 120GB.
3. Now, I boot up the computer to the OSX install CD (since it is a blank new HD). I open up Disk Utility on the install CD, and try to restore the image i created (on my external USB HD) to my new 120GB internal drive. I am able to select the image to restore, but cannot select my internal drive as the destination.
I have all sorts of music, movies, applications...etc. on my old HD that I want on my new drive.
I want to have my computer be identical to before I upgraded, just with a larger HD. Is this possible?
I have tons of external USB HD space to use if needed, and I also still have the old HD... if I need to create a different kind of disk image or something.
Please help!
Macbook 2.0GHz (White) Mac OS X (10.4.8)

I did this already. I failed to mention it in my first post. I have my HD "111.8 GB Seagate..." and underneath it: "Macintosh HD". Still can't restore an image to the "Macintosh HD" volume.

BSI Tax Factory Upgrade 8.0 to 9.0

Hi BSI,
We are upgrading our BSI tax Factory from 8.0 to 9.0. We are running:
Windows 2008 R2
SQL Server version 10.50.1777
I'm able to connect to the database using login TF90 through SQL Server Management Studio, the ODBC Data Source Administrator and the TaxFactory Client is connecting fine too.
But when running report RPUBTCU0 from the SAP system , its caught under ABAP dump-> SYSTEM FAILURE.
Looking at the error.txt.
=Running connect_db_taxfactory
BSI dataset -> 101
ConnectToDataSource... Starting
ConnectToDataSource...Succeeded
Connect to Dataset Error string = 101
ConnectToDataSet... Starting
ConnectToDataSet...failed
Error String -> 4020 - THERE IS NO VALID LICENSE INSTALLED FOR HOST HCA-MSAP68:UNKNOWN.
=RFC error
operation/code connect_db_payroll_tax_calc_us
key RFC_ERROR_SYSTEM_FAILURE
status
message See RFC trace file or SAP system log for more details
internal status .
The machine key is successfully installed.
Please guide what we are missing here.
Please contact me at +60123675076 (malaysia) at anytime.
Thanks.
Thava

We managed to solve this by changing tf90server.bat file.
from - I:
CD I:\BSI\Server9.0
tf90server.exe %*
To - I:\BSI\Server9.0\tf90server.exe %*
Now we could run report RPUBTCU0 without error.
Thanks.
Thava

Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcome

Hi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal

Lock-ups on MCS-7825 after after OS Upgrade to 2000.4.4aSR6

About 3 weeks ago, I upgraded some MCS-7825 & MCS-7835 servers to 2000.4.4aSR6. Since then, one of the 7825's has been rebooting on its own almost twice a day. The other 7825 and 7835s are operating fine.
Anybody else encountering a problem with this? I see in the release notes, some BIOS and firmware updates are included for the 7825, and am suspecting this is the problem.

My problems actually turned out to be hardware, I think. I reviewed the logs and found out it had been happening for several months.

Can I upgrade my laptop?

I have the Satellite X205-S7483 w/ 2gb ram.
Can I add more memory and can I possibly upgrade the video card? I have a Geoforce 8700m gt 256MB
Thanks!

You have a User's Manual right there on your desktop. Go to Start/All Programs/My Toshiba/User's Guide. Or you can click on Download at the top of this page, enter the model info requested and you'll find the User's Guide and lots of other info for your model.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Graphic Card Upgrade for HP-Pavilion dv6t-7000

Hello. I have the HP Pavlilion dv6t-7000 with the NVIDIA GT650M 1GB grpahics card. Now because of my work, i need to extends my graphic card memory. So I want to ask if my laptop is possible to upgrade to GT650M 2GB card.
My product number is A5F74AV. And my wannary is end on 8/24/2013.
And this laptop is a gift of my aunt from USA, and I'm living in Viet Nam now. So if yes, can HP Vietnam do the upgrade for me? My aunt's family is very busy so I can't resend my laptop and ask them to return to you.
Thank you very much!

Hi:
The only way to upgrade the video card in your notebook is to replace the entire motherboard which would cost as much as buying a new notebook with better graphics.
If you had HP do the upgrade, it would probably cost more than buying 2 notebooks with better graphics than yours.

Voice Memos Issues After IOS 8 Upgrade

After upgrading to IOS 8 on my iPhone 5s, the majority of my voice memos are missing and the ones that remain no longer have titles or even play back on my phone. Any ideas?
Thanks.

I was able to recover my voice memos, though the original titles are gone.
I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

NULL and Unspecified in Dashboard prompts after upgrading 10g to 11g OBIEE

Hi All,
We are working on OBI upgradation project from 10g to 11.1.1.6.5. We are facing one issue in Dashboard prompt level. If we can create Dashboard prompt on a column, its giving "NULL", "Unspecified" additionally. But, in 10g there are no extra values.
And the 10g, 11g instances are pointing to the same database and there are no NULL, Unspecified values in Database level.
Through some blogs and articles we found some solutions n are below.
To remove NULL:
-->Go to the Physical Column properties in Physical Layer and Disable the Nullable option by uncheck the box.
-->Go to the Database Features in Physical Layer and disable value to NULL_SUPPORTED.
-->Go to Edit Dashboard Prompt, in Choice List Values drop-down list select SQL Results.
To remove Unspecified:
-->Go to Edit Dashboard Prompt, in Choice List Values drop-down list select SQL Results, then write the SQL statements as columnname is not equals to "Unspecfied" ( In this way we can able to remove Null's also.)
-->Go to Content tab of LTS, in Where clause write an SQL query to restrict Unspecified values.
Note: CHeck with ETL, because if they maintains the Default value is Null when the Datatype is Character and they can maintain 9999 or #### if the datatype is Numeric. And check the Physical query and debug it carefully.
But, we have very big Repository and we have huge no.of Dashboard prompts. So, its not an easy thing to manage by using above solutions. Correct me if there are any mistakes in above.
Any ideas on this...?
Appreciate your help on this..!
Thanks in Advance,
Raghu Nagadasari

Hi Frnds,
As of now, i found the only solution for the above mentioned issue that how to avoid NULL in dashboard prompt level:
Go to the Physical Column properties in Physical Layer and Disable the Nullable option by uncheck the box.
We have done this manually for all tables.
Appreciate if u have any other ideas.!!
Thanks,
Raghu Nagadasari

I have upgraded from 3.5 to 4.1 , it downloads to the folder but still uses the 3.5

I'm getting an urgent to update on my screen so I have updated from 3.5 to 4.1 , it has down loaded to the firefox folder but still brings up the old firerfox.
I have downloaded it 3 times and rebooted around 6 times but still the same screen telling me to upgrade as the older version is not now protected.
Kind Regards
Dennis

It looks that the update wasn't successful because your "More system details" list still shows a Firefox 3.5.19 version.
If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Memory upgrade on Satellite A300D-15B

Hi all,
I am having upgrading the ram on my laptop from 4gb to 8gb. First I will post the full details of my laptop then explain the problem.
(Original Configuration)
Satellite A300D-15B
Model : PSAKCE
Bios Ver: 3.30
AMD Turion X2 Ultra Dual-Core Mobile Processor ZM-86 (Upgraded from ZM-80)
Genuine Windows Vista Home Premium 32bit
4096 MB (2048 +2048) PC2-6400 DDR RAM (800MHZ)
Right then, I installed Windows 7 32bit on it ages ago and upgraded the CPU and have never had any issues as i work with computers.
I did some checking and found out my Motherboard supports uo to 8gb of ram and decided to buy two 4gb ram modules. I made sure I got the correct ram for my laptop.
I upgraded the ram and it recognised it without any issue and even stated that 8gb of ram was installed under 'System'in contol panel and in the bios. As it was a 32bit OS it only utilised 3gb of the ram. I then decided to upgrade my OS to Windows 7 Ultimate 64bit and thats when the fun began.
Basically my laptop will not boot if I have more than 4gb of ram installed (In any configuration) and get a BSOD. I have had a few different Stop Error codes but I cant seem to find a solution. Also there arent any/many options to change in the bios so Im stumped.
I have tested the ram modules with Memtest several times without error and have also tried them in different laptops without issue. I know my laptop suppors the 8gb as I had no issues running the 32bit OS.
All my drivers and other software are to date and work fine and have installed all windows updates to date.
Has anyone else had this issue and is there a patch/fix available?
Any help, ideas or suggestions are welcome and hopefully I can sort this problem out. Many thanks in advance.
Melchius

Hi there,
The Ram I bought is the correct to the letter and is as follows:
Komputerbay DDR2 PC2-6400 @ 800Mhz - 2 x4gb modules.
It has exactly the same Cas latency and timing settings aswell.
You mentioned that it booted fine in 32bit as it didnt address the full 8gb but now on the 64bit OS I have 1 x 4gb module installed and it is recognised without any issues,.
If the ram wasnt compatible in any way then I should be getting some errors or something to indicate a problem.
It also wouldnt boot/run properly with just 1 of the 4gb modules installed on either 32/64bit OS's, which isnt the case at all. I am certain that the ram itself isnt the issue.
I also tried installing 1 x 2gb and 1 x 4gb module for a total of 6gb and I managed to get windows to load (once) but it then stopped responding. Im not very keen on spending loads of money on another 8gb of ram from Kingston or Crucial if the same thing is going to happen, which I fully expect it will.
Thanks for the suggestions though, any other ideas?
Melchius
Also worth mentioning that the ram that came with the laptop wasnt even Toshiba brand, it is Samsung ram so maybe they should make a list of all the compatible makes for their laptops or maybe not lock their bios's to the point that the end user is so limited.
+Message was edited by: Melchius+

Memory upgrade on Satellite M30-344

Hi,
i have upgraded my memory from 2 x 256 mb to 2 x 512 mb, but nothing works. i bought the ram modules compatible to pa3312u-1m151.
this system doesn't boot, nothing happens. after reinstalling the old module, system starts normally.
what can i do?

Hi
This case is very clear. You have used not compatible memory modules.
As in the previous posting suggested, you should use the other compatible ram module.
If you dont know where to buy this part so please contact the Toshiba service partner in your country. There you will be able to order the right part.
By the way; I can confirm that the PC2100 512MB (PA3164U-1M51) is a right module

Memory upgrade on a Satellite A100-912

I own a Satellite a100-912 and I want to upgrade its memory!
As it seems, this model supports only PC2-4200 DDR2 SODIMM modules (533 Mhz). Before bying a memory module that might regret, I want to know if there will be any compatibility issues if I use to this laptop PC2-6400 DDR2 SODIMM module (800 Mhz).
Is it going to work even at lower clock speed (533 Mhz) or is it going to be a total waste of money?

As far as I know the FSB is able to handle 667Mhz modules.
You can use lower modules (533Mhz) without any problems but modules with higher Mhz will not run with full speed due to the limited FSB.
So I dont recommend buying 800Mhz modules. Firstly they are not supported and secondly its waste of money!

Upgrade BI 3.5 to 7.0

Similar Messages

Maybe you are looking for