Upgrade...but...what is my ram details?

Hi,
I want change my ram upgrading my macbook bought in January to 4Gb. But, what is the type of ram to adopt? I report details about current 2GB ram:
BANK 0/DIMM0:
Dimensioni: 1 GB
Tipo: DDR3
Velocità: 1067 MHz
Stato: OK
Produttore: 0x802C
Codice prodotto: 0x384A53463132383634485A2D314731443120
Numero di serie: 0xDB26686A
BANK 0/DIMM1:
Dimensioni: 1 GB
Tipo: DDR3
Velocità: 1067 MHz
Stato: OK
Produttore: 0x802C
Codice prodotto: 0x384A53463132383634485A2D314731443120
Numero di serie: 0xD83EE89A
Thank you!

GfulDedFan wrote:
Assuming that you have the Aluminum MacBook, here's Apple's writeup in the manual:
*Your computer has two memory slots that you access by removing the battery and bottom case. Your MacBook comes with a minimum of 2 gigabytes (GB) of 1066 MHz Double Data Rate (DDR3) Synchronous Dynamic Random-Access Memory (SDRAM) installed. Each memory slot can accept an SDRAM module that meets the following specifications:*
*Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format*
*1.25 inch (3.18 cm)*
*1 GB or 2 GB*
200-pin
*PC3-8500 DDR3 1066 MHz Type RAM*
I upgraded mine (when the prices were lower) using OWC RAM from macsales.com. They test their RAM for all Mac products and it's guaranteed to work. Other sources may be questionable but I've heard that some have good luck with Crucial brand.
Though there seems to be some 200 vs. 204 pin schizophrenia in the Apple docs (computer manual vs. website).
Phil

Similar Messages

  • Upgrade but what?

    Hello All,
    I got this error.....
    "in order to continue with the upgrade, the database you are updating requires a backup
    whats is this? what should i have to do?
    Thanks
    Dhaval Thaker

    Dear Dhaval,
    If the following message appears:
    u201CIn order to continue with the upgrade, the database you are upgrading requires a backup,u201D you must back up the database you want to upgrade.
    You must begin the upgrade within 30 minutes of your last backup.
    For more information regarding Business One upgrades please refer to the AdministratorGuide_SQL for 2007 B, which can be found on the Documentation Resource Centre on the Portal. http://service.sap.com/smb/sbo/documentation      
    See chapter: 4 u2013 SAP Business One Upgrade
    hope it helps,
    Regards,
    Ladislav Meszaros
    SAP Business One Forum Team

  • What kind of Ram do I need for my Mac?

    Hello
    I want to upgrade the speed of my mac by adding a 2GB stick of ram. But what kind of ram do i need? Would this work for my Mac (Mid 2011 21.5 inch) http://www.amazon.co.uk/Crucial-PC3-10600-Desktop-Upgrade-240-pin/dp/B001NA25VS/ ref=sr_1_1?ie=UTF8&qid=1390290563&sr=8-1&keywords=2gb+ram?

    Macs are very, VERY picky about the RAM specs they need.
    That RAM is the wrong pin count and probably for PCs and not a Mac
    Here is the proper RAM spec for your year and model.
    32 GB (Actual) 16 GB (Apple)
    Memory Slots
    4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
    Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
    http://www.crucial.com/store/listparts.aspx?model=iMac%20(21.5-inch%2C%20Late%20 2011)&Cat=RAM
    http://eshop.macsales.com/shop/memory/iMac/2011/DDR3_21.5_27
    Good Luck!

  • I want to upgrade my Imac from Snow Leopard to Yosemite, but only have 1Gb RAM. Can I add RAM, then upgrade?

    I want to upgrade from Snow Leopard to Yosemite, but can't because I only have 1Gb Memory.  Can I add more memory, then do the upgrade? What should I buy?

    gwd440 wrote:
    Its older than I realised. Purchased in 2009, but is an early 2008 model.
    So I'm possibly aiming a bit high by going for Yosemite?  Would an earlier o/s be a more realistic option?
    On the RAM issue, I fully agree with what Etresoft has written. I have just visited various sites, including OWC, Mactracker and iFixit and your Mac seems to have the Penryn processor. It will address 6GB of RAM which is more than enough for your use.
    Where I differ from him, is Lion. The last big cat which I liked was probably Snow Leopard, and thereafter now Yosemite. There has been a lot of successes with your generation migrating to Yosemite, but with 6GB of RAM. Admittedly there were also problems for some, but I have observed even more successes even after initial problems. Mostly these problems were caused by adware or crapware installations. (Thank you Etresoft for a wonderful utility!)
    Your iMac also has a SATA interface for a 3GB SSD, which is good enough. We have a Mac here with the same interface, still with a normal conventional stock HD running Yosemite, but only 4GB of RAM and it is running fine.
    Of course the newer technology processors, faster RAM, PCI SSD, greater bandwidth on the newer Macs perform much better. But as I am on the older side, (ha ha), some of the 'vintage' Macs are still my favourites to use for certain tasks. Like using 9.09 for doing certain things and then converting the results afterwards for completion!
    But, once again, it is your decision and only you can decide as you yourself knows your own circumstances better. Weigh up the options, considering what Etresoft has pointed out vs what Yosemite offers ito continuous support, security and features. There are a lot of your type of iMacs out there, and some of the users spoke about feeling like having a new Mac. There were others, who were wailing though. You could of course, also follow the advice of a test installation on an external and testdrive it, or wait for the release of 10.10.2 which I read somewhere is eminently close?
    Have fun
    Leo

  • What third party RAM is equal to "1600MHz DDR3 SDRAM - 4x8GB" for the NEW, 27" 2014 4K iMAC and is it advisable to buy instead of the Apple upgraded RAM?

    What third party RAM is as good as the "1600MHz DDR3 SDRAM - 4x8GB" upgrade that Apple offers for the NEW, 27" 2014 5K iMAC Retina?
    And is it advisable to buy instead of the Apple upgraded RAM? (my understanding is that third party RAM is not as costly).

    go with one of the quality sources for ram OWC and Crucial are very well thought of
    your options with the 5K  when you buy it are
    8GB 1600MHz DDR3 SDRAM - 2x4GB
    16GB 1600MHz DDR3 SDRAM - 2x8GB [Add $200.00]
    32GB 1600MHz DDR3 SDRAM - 4x8GB [Add $600.00]
    you might  want to go with the 16GB option when you buy if you know you might want to go to 32GB some day as that will get you to 32zb at the lowest cost. or you can start with the 8 and add 8GB sticks as you need them but if you are not happy stopping at 20GB you will end up with a pair of 4GB sticks to try to sell on ebay... or if you are lazy like me you get a couple of extra xmas tree ornaments.. i have 35 years of ram methods on my tree now dating back to the extra ram for my Apple ][ extra 8k and not a few obsolete processor ornaments too... dress em up with glitter so they sparkle
    this is the owc page for ram for the 5k iMachttp://eshop.macsales.com/shop/memory/iMac/Retina-5K/DDR3L
    8.0GB PC3-12800 1600MHz SO Kit (4GB x 2) w/Lifetime Warranty
    Same Day
    $99.79
    12.0GB PC3-12800 1600MHz SO Kit (4GB + 8GB) w/Lifetime Warranty
    Same Day
    $147.50
    16GB PC3-12800 1600MHz SO Kit (8GB x 2) w/Lifetime Warranty
    Same Day
    $197.99
    32GB PC3-12800 1600MHz SO Kit (8GB x 4) w/Lifetime Warranty
    Same Day
    $395.00

  • I upgraded my icloud storage and amount got deducted from my account but yet storage wasn't upgraded. What can i do?

    I upgraded my icloud storage and amount got deducted from my account but yet storage wasn't upgraded. What can i do?

    How long did you wait for the systm to catch up to your request for more storage?  it can take a little while, up to an hour sometimes I have heard.
    If you don't see any more room after waiting a while, try resetting your phone to see if it appears then.
    If that doesn't help go here, http://www.apple.com/support/contact/ and see if they can help you out.

  • I have Pages '08 3.0.3. Am trying to Download an Upgrade but get a mesdage saying "an eligible Keynote app was not found in the location/Applications/iWork '09. What to do?

    I have successfully imported a Pages document from my (new) iPad but it will not open because it tells me that "You need a newer version of Pages to open this document".
    I have Pages '08 3.0.3. Am trying to Download an Upgrade but get a message saying "an eligible Keynote application was not found in the location/Applications/iWork '09".
    What to do?

    Go to the App Store in your Applications folder, not in a browser, and search for 'Pages':
    Click on the price to buy immediately (there is no 'basket') - the credit card you have registered with iTunes will be charged. Or click on the icon for an information page:
    Again, click on the price to buy immediately - note that you get no 'are you sure', the purchase is immediate and not cancellable.

  • I am running 10.7.5 but when I try to install 10.8.2 I get an alert that says 10.8 is required first.  Can't find a 10.8 system upgrade.  What do I need to do to install Mountain Lion?

    I am running 10.7.5 but when I try to install 10.8.2 I get an alert that says 10.8 is required first.  Can't find a 10.8 system upgrade.  What do I need to do to install Mountain Lion?

    Buy it from the Mac App Store.
    (70259)

  • Hello. I have a Mac i7 2.3 Ghz 16GB RAM. OS 10.9.5. I can not open any program. AE and Premiere. I upgraded but nothing happens. because. thanks. Ben

    Hello. I have a Mac i7 2.3 Ghz 16GB RAM. OS 10.9.5. I can not open any program. AE and Premiere. I upgraded but nothing happens. because.
    thanks
    Ben

    Ben do you receive any specific error messages?   Were you able to apply the updates successfully?

  • I have been using Macromedia Contribute 3 to maintain my website so my needs are pretty simmple. But I would like to upgrade but don't know what to download. I want the new software to handle my existing website without a lot of challenges. What do you re

    I have been using Macromedia Contribute 3 to maintain my website so my needs are pretty simple. But I would like to upgrade but don't know what to download. I want the new software to handle my existing website without a lot of challenges. What do you recommend?

    Hello,
    There is no upgrade path available from Macromedia Contribute 3 to Adobe Contribute 6.5. However you can buy the latest version of Contribute which is 6.5 from the link mentioned below.
    http://www.adobe.com/products/contribute.html
    Regards,
    Rajeev

  • I have a Mac i5 and need to download the application 'Numbers' but everytime I try to do so, it says can't do as the ver 2.2 for the app needs new software 'Snow Leopard'. I don't want to upgrade but dont know what to do??

    i have a Mac i5 and need to download the application 'Numbers' but everytime I try to do so, it says can't do as the ver 2.2 for the app needs new software 'Snow Leopard'. I don't want to upgrade but dont know what to do??

    If your profile is correct you're already on the final version of Snow Leopard (10.6.8). Sure it wasn't Lion it was asking for?
    If that's the only version available on the app store, you'll need to source a copy of the iWork '09 DVD - not cheap now - only available via Amazon or eBay etc.

  • TS1814 I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now???

    I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now??? i am really feeling difficulty because i have been disconnected from the network.
    I am from Pakistan.

    The 3G cannot be updated to iOS6, it can only go to iOS 4.2.1.
    Activation issues are generally the result of the device being hacked or jailbroken.

  • I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

    I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do? Can I find the original serial number in my old Imac?

    You'll have to contact Apple. See Pro Application Replacement Serial Numbers

  • I have an air with 64Gb hard drive and 2Gb RAM and would like to upgrade both the HD and RAM. WHat should I buy?

    I have an air with 64Gb hard drive and 2Gb RAM and would like to upgrade both the HD and RAM. WHat should I buy?

    TWTexas wrote:
    WHat should I buy?
    compensate or purchase a new Air
    Recommend a SUPERSLIM portable 1TB HD
    RAM cant be upgraded, as The Fox-man has already said.

  • HT2305 I want to upgrade IMovie, IPhoto, Garageband and ITunes. My MacBookAir is one year old. But what are the prices for updates?

    My MacBookAir is one year. I want to upgrade IMovie, IPhoto, Garageband and ITues, But What are the prices for these upgrades. How do I get around?

    Actually, if you are updating the free iLife apps (iPhoto, iMovie & GarageBand) that came with your new Mac, the updates are free. Only if you are upgrading to newer major paid versions would you be charged.
    iTunes is always free, but is located in Apple Downloads, not the Mac App Store;
    http://support.apple.com/downloads/

Maybe you are looking for

  • How to open a jspx in a popup from managed bean.

    Hello, I'm using Studio Edition Version 11.1.1.4.0. I have a JSPX that is to be used as an application monitor screen. So it contains 5 af:tables with plenty of columns & query search criteria. Each of the tables has context sensitive menus as well a

  • [svn:fx-4.x] 15172: integrate latest 10.1 players 10_1_d50_507

    Revision: 15172 Revision: 15172 Author:   [email protected] Date:     2010-03-31 10:32:40 -0700 (Wed, 31 Mar 2010) Log Message: integrate latest 10.1 players 10_1_d50_507 QE notes: no Doc notes: no Bugs: sdk-25787 Reviewer: no Tests run: ct Is notewo

  • Why "wait for operation complete" error ?

    HI, When I use the vi "Read multiple waveforms" there are an errors that appears in the VI "wait for operation complete" and I cannot found the cause of this error ! Can you bring me your help on this suject ? Thanks you beforehand Here my vi in LV20

  • Error at starting EHPI installar

    Hi Experts, Could you please let me know what needs to be done for below error ./STARTUP jce_policy_zip=/EHPSoftware/jce_policy-1_4_2.zip Checking if C++ runtime is installed ... Starting from /EHPSoftware/EHPI/sdt... Checking username "sidadm" for c

  • AR: Apply a debit memo to a credit memo - debit memo not showing on LOV

    Hello, We are trying to apply a credit memo to a debit memo, but the debit memo does not show on the list of values on the Application form. We are doing as follows: 1. Entered credit memo and completed 2. Entered debit memo and completed (same custo