Upgrade button missing in maintenance optimizer of Solution manager
Hi,
We are going to perform upgrade R/3 4.7*110 Non uniocde to ERP 6.0 EHP non unicode.
We used SAP EHP 1 for SAP Solution Manager 7.0 and support packake for SAP EHP 1 for SAP Solution Manager 7.0 is 24.
Applied following OSS notes pertaining to MOPZ :
0001450757
0001461849
0001485385
0001548530
0001590226
COnfigured using tx code SMSY - Product System is SAP ERP and product version is SAP ERP 2004.
Created logical components and assigned to <SID> of R/3 4.7 Development system.
Then created solution and configured solution landscape . Logical component was assigned to solution landscape.
Then clicked on "Create new Optimizer transaction"
Then select product version : ERP 2004
Then select Product system and selected <SID>.
But only "maintenance" button was displayed.
However "Upgrade with enhancement package" button is not showing.
Please help us the solution.
Thanks
ap
A Prasad Rao wrote:
Hi Sunny
> For R/3 4.7*110 product name is ERP and product version is ERP 2004
>
> I want upgrade button or upgrade with Enhancement package button should appear
>
> It seems we need to apply some OSS notes but coul not find anything becasue SP stack for solman installed was 24.
>
> Please help
> Thanks and Regards
> APR
As I said earlier, you need to register it as ERP 6.0 only to get Enhancement Package installation button. There is no other option for it. If you want to confirm then check How to install EHP4 guide on http://service.sap.com/erp-ehp.
Thanks
Sunny
Similar Messages
-
How to configuration Maintenance Optimizer in Solution Manager 4.0?
Hi All,
Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
If any one having the document for same then please give me.
My mail id is : - <email address removed by moderator>
Thanks a lot,
HarshalHello Harshal,
Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
Another document is attached in Note 990534.
If you have further issues, Note 1024932 might be a good starting point.
Best regards,
Victor -
Error with Maintenance Optimizer in Solution Manager 4.0
Hi, I am configuring Solution Manager for download SP, I check marketplace and download the guide, when I try to download a SP following message show me:
"Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM)."
I go to sm59, verify RFC SAP-OSS with correct data, I found at guide following Host :
/H/54.16.44.50/S/sapdp99/H/54.62.200.35/S/
When I try press Connection Test Buttom I can not connect to SAP.
Do you know which can be my error? .....
Regards.Hi,
Following the note 1024932
Steps to do before configre the maintance optimizer you need to configure sattilite systems in solution manager.
go to SMSY and configre R\3 systems.For these systems you need to create RFC connections and Logical comp.
http://service.sap.com/rkt-solman
for tutors and PDFs how to set up MOPZ.
Points if it helpfull
Regards
Neni -
Maintenance Optimizer in Solution Manager 3.2
We are experiencing the sheer joy that Solution Manager is, while trying to configure the Maintenance Optimizer.
From the document MOPZ_Component32_vers4.pdf document that is for SP15 for SolMan 3.2, we are confused by this section on Page 6.
"Your system administrator must have performed the following Customizing activities:
�� Maintain User for Communication with SAP Service and Support
�� Assign S-User for SAP Support Portal functionality or with the transaction AISUSER
Your S-User must be assigned to the same customer or corporate number as
the S-User which your administrator entered in the SAP-OSS RFC destination."
We just don't understand the last sentence. You enter an S-User in the SAP-OSS RFC destination in sm59?? Where??
Currently in AISUER I have an entry, with my SAP User ID (eg. FRED) and my S-User ID in the 'Contact Person' column (e.g. 123456, my S000123456, shortened).
We can access the Maintenance Optimizer, but packages are not visible there. No error is reported. I have the necessary Roles. Are these the correct values?
Our SAPOSS Rfc is functioning, as user OSS_RFC. What the document is trying to say about the relationship between this RFC and a service marketplace S-User is unclear.
Any assistance appreciated. Remember, SM 3.2!Hi,
You can download this to desktop or you can transfer same to server(/usr/sap/trans/EPS/in/)
You have to uncar using SAPCAR.
Also you can directly upload from front-end using spam/saint as well.
Then apply the same using spam/saint.
Let us know if you need any clarification.
Regards -
How to configure maintanace optimizer in solution manager
Hi,
How to configure maintanace optimizer in solution manager.
Regards,
AsifHi,
Check this link... it has complete step by step configuration of Maintenance Optimizer...
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/90454eea-3564-2a10-d0b9-c84d468365ab
http://help.sap.com/saphelp_smehp1/helpdata/en/46/418970cdb45fabe10000000a1553f7/frameset.htm
https://websmp210.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp210.sap-ag.de/~sapidb/011000358700000086862008E.sim
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1787522650DB00553277662805589317End?blog=/pub/wlg/8217
Also, http://service.sap.com/rkt-Solman --> Technology Consultant & System Administrator -> Technical configuration ->configuaration of Basic settings in solman, Mopz simple usage and normal usage
Thnx,
Waseem. -
Maintenance Optimizer - Under Change Management in solman_workcenter
Hello,
If I go to transaction solution_manager and navigate to the Maintenance Optimizer in our solman system, I see dozens of lines of maintenance requests. Furthermore, I go start a new transaction and I will be shown the appropriate logical components which are assigned to the solution landscape that I chose when entering solution_manager/dswp.
However, when I use solman_workcenter instead (which is the direction that we want to go), and then go to the change management tab, and click on maintenance optimizer, I am not shown any maintenance requests. Furthermore, when I try to start a new transaction, the logical components are not displayed and I cannot choose the system for which I want to the transaction for.
Am I missing some configuration or setup within SOLMAN_WORKCENTER which is preventing me from being placed into the appropriate Solution Landscape?
Thank you.John,
Looks like this is an authorization issue.
Please check the user has these following roles.
SAP_SMWORK_ADMINISTRATOR_COMP
SAP_SMWORK_BASIC
SAP_SMWORK_BPM
SAP_SMWORK_CHANGE_MAN
SAP_SMWORK_DIAG
SAP_SMWORK_INCIDENT_MAN
SAP_SMWORK_JOB_MAN
SAP_SMWORK_LANDSCAPE_MAN
SAP_SMWORK_SETUP
SAP_SMWORK_SYS_ADMIN
SAP_SMWORK_SYS_MON
It's working fine for us.
Our user has these above said roles.
Regards,
Sanjai -
Upgrade on SAP Plant Maintenance and Product Data Management
Hi Gurus,
I assigned to a upgrade project for Plant Maintenance and Product Data Managemet modules.
Please guide me what are the steps to follow and provide more information on this ...
Thanks in advance!!!!!!!!!
Regds,
RKHello Kurni,
In PDM/PLM latest version is PLM 7.0.
There are many new functionalities available in this version.
Earlier version can be accessed from SAP GUI, but the latest one can be accessed from Portal/NWBC.
DMS side many notes have to be applied as you will be instaling EHP4.0 as part of the upgrade.
ECM side some standard reports are missing in PLM 7.0, which were available in ECC6.0.
Regards
Prasad K -
Automatic Master Data Maintenance in SAP Solution manager
Hello!
I am doing the settings from the "Configuration of Service Desk for VAR".
I find it difficulty "4.1 Automatic Master Data Maintenance (Standard)".
My questions:
1. Tcode SM30 -> V_AIINSNRS
http://imglink.ru/show-image.php?id=c095122ec4b0119d32ffab4675b174e7
How to insert data into a table "V_AIINSNRS"?
table V_AISAPCUSTNOS:
http://imglink.ru/show-image.php?id=f45703bd65e714ba309ecc3010fc7271
I Used report AI_SC_GET_SAP_CUSTOMER_NUMBERS.
2. I tried to run the report AI_SC_REFRESH_READ_ONLY_DATA.
http://imglink.ru/show-image.php?id=598159ed85a780096de8e5afead42095
What does this message?
Transaction SMSY_SETUP -> Expert Settings: performed
Thanks!Hi Dmitriy,
1.
These tables are maintained by the report AI_SC_GET_SAP_CUSTOMER_NUMBERS.
Also, the report uses the S user is stored in the RFC SAP-OSS to determine all the SAP customer numbers that you support.
So, an S user from the Service Provider, with a password that has authorization to
display all customer information for the VAR customer numbers, must be available in the
RFC SAP-OSS.
For further information you can check note 1151450.
2.
To run the report AI_SC_REFRESH_READ_ONLY_DATA, you should be able to perform the above activitie first and flag customer numbers or installations for generating the data.
Best Regards,
Fernando Rocha -
Solution Manage Maintenance Optimizer Installation
Hi,
I am in the process of trying to configure maintenance optimizer for solution manager. I have performed the following pre-requisites as specified in the SAP documentation
1. Support Package 09 for Solution manager
2. Applied OSS Notes 1024932, 1008717, 0950974
3. Set up user with appropriate roles and authorizations SAP_MAINT_OPT_ADMIN
4. Activated BC Sets as dictated by OSS note 990534
5. Define a Solution
6. Assign S-user to MO user
7. Check RFC Destination and assign S-user Login details
When I enter the solution and attempt to configure MO via Change Management -> Support Package Stacks, I get as far as the screen where you select the appropriate product version. I select the product and click to continue however I receive the following message
<i>'Condition REQUEST_IN_PROCESS is not checked without Change Management integration'</i>
Can anyone give me any suggestions to resolve this error.Hi Stoecker,
I am also getting same problem.i followed that note which you have mentioned.
but where do i deselet the "íntegr' field?i am not getting
can plz exploain me on this.
and also one thing i want to add SAP ECC under systems in smsy transaction.
when i am trying to add it is asking for Product key.
can u plz provide me the key?
Thanx in advance.
Thanks and Regards,
Vinnu. -
SOL MAN - Maintenance Optimizer
Hi all
I configured Maintenance Optimizer in Solution Manager 4.0 but when launching:
dswp -> change management -> support package stack - > maintenance optimizer
select product versrion
select system
-> continue
only procedure 8000000x saved displayed on status bar. No further screen is displayed.
I read note 1032322 and attached file Setup_Maintenance_Optimizer.zip
RFC connection is working well.
Is anything missing in customizing?
Thanks
RHi raffaele,
I'm getting problems with setting RFC connection. Can i get your help ?
topic: Maintance optimizer - connection settings
mail: [email protected]
Thanks in advance,
Dimitry Haritonov -
Help about Solution Manager Maintanence Optimizer
Hi All,
I have a small confusion how to follow the configuration of Maintenance Optimizer in Solution manager.
Yesterday i installed the solution manager and assigned the ECC server to that solution manager using SMSY transaction.
Now i have to configure maintenance optimizer; what are the doubts i have:
1) I choose 001 client to configure; now i have to create any user with all roles or else can i use sap* ?
2) what are the roles i have to assign that new user?
3) Now what step i have to follow; it mean goto transaction SPRO and follow or any other configuration is required?
Please give me some suggestions...
Thanks & Regards,
Vivek N.> 1) I choose 001 client to configure; now i have to create any user with all roles or else can i use sap* ?
just create user with profile SAP_ALL and sap_new
> 2) what are the roles i have to assign that new user?
give all authirisation sap_all
> 3) Now what step i have to follow; it mean goto transaction SPRO and follow or any other configuration is required?
check http://service.sap.com/solman-mopz and SAP Note: 1024932
Samrat -
AISUSER not assigned - Giving error during Maintenance Optimizer
Hi Tech Masters,
I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
"Partner number 0000000000 was not found in table AICONTACTS."
Please help me out.
Thanks
Rabi PalAre you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
May be this problem is related with several customer number administration ? check these notes
Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
Note 1082010 - Administration of several customer numbers -
Applying support packs in ECC6.0 through solution manager
Hi,
Can you explain me how we can configure to apply a support pack in ECC 6.0 (Dev, Quality & Production) through solution manager.
For that 4.0 is enough or it should be upgraded to 7.0Mohammed,
1. First, You have to configure Maintenance Optimizer in Solution Manager.
2. Then create the systems in SMSY.
3. Finally create solution for each system in DSWP, Apply support packages to the systems ECC6.0(DEV, QAS and PRD).
Refer these threads:
Configure Manintainance optimizer
UPGRADE SESSIONS: What's SAP Solution Manager Maitenance Optimizer?
These SAP tutors explain in detail(Step by Step)
https://websmp209.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp209.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if you still need any help
Regards,
Sanjai -
Support Packs in Solution manager
Hi,
I have a query, when I am going to select patches through maintenance optimizer for solution manager I can see the source and target stack level at SMP and when I am putting the source stack(17) and the target stack as latest, solution manager 7.0 EHP 1-23 and going further for download it shows the support packs corresponding to release 701 but not to 700, as my current support pack level for solman is 16(release 700) and I can see there are support pack level up to 21 for release 700, I am confused why it is not taking account the remaining patches for 700 or can I switch directly to 701 and apply the support packs corresponding to release 701.
Regards,
MridulDear Mirdul,
Check SAP note 1169247. In which it is mentioned that:
ABAP stack requirements
You can start the SAINT update from any Solution Manager 7.0 ABAP Stack.
Java stack requirements
A direct JSPM update to Solution Manager 7.0 Java Stack 18 and higher is not possible from some of the Java stacks. Therefore, proceed as follows: First, use the JSPM update to update the Java stack only to Solution Manager 7.0 Java stack 17 and then update to the relevant Solution Manager 7.0 Enhancement Package 1 Java stack.
Take the numbering into account: Solution Manager 7.0 Java stack 17 contains NetWeaver 7.0 Java stack 16.
Also, check point number 5 in that.
I think now it will be clear.
Thanks
Sunny
Edited by: Sunny Pahuja on May 13, 2010 6:10 PM -
How to include an enhancement package with upgrade without Solution Manager
Hello,
I have been trying to do an upgrade from SAP R3 46C to ERP6 in my sandbox. I want to include Enhancment package 3 with the upgrade. I have tried using the Solution Manager to download the Enhancement package and it work fine except that it did not create the XML Stack configuration file that the upgrade is looking for. Therefore I downloaded the DVD for Enhancement package 3 and included that in the mounted CDs in the PREPARE portion of the upgrade and it does not recognize it.
Now for my question, is there a way to include the Enhancement package with the upgrade without using Solution Manager? If so, could someone please let me know where to find the information or share the procedure with me?
Thank you in advance,
RonThe EPs are just like support packages (optional); if the upgrade is not letting you put it during upgrade then just do it once the upgrade is completed.
Maybe you are looking for
-
Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)? Exemple: Table1 Cliente name: John Client number: 12345 Survay number of negative answers: 3 Table2 Questions and answers that were
-
XML file not getting transferred to archive folder once upload is done!!
Hi all, I am working on a scenario where SAP R/3 sends data to SAP MDM 5.5 (SP04 PATCH 2) with XI as middleware.The XML file sent by XI is getting uploaded from the FTP folder using Manual Import (Import Manager). But after importing for the
-
Pages 5 docs are unzipped packages - won't upload nicely
Just an FYI really. Turns out Pages 5 documents are 'unzipped' packages. So they won't upload from browsers like Firefox - because they see the package simply as a folder. Safari seems to know to 'zip' a file during upload, but you end up with a zi
-
Hi All, I am crawling documents from a file server. I created a new content source and crawled the documents. All documents are crawled successfully. Then I went to my enterprise search center site collection and created a new result source. I have a
-
"Check Video Cable" Message on HP 2311x (different issue than original post by jca93)
Hello, Monitor Status displays: MONITOR STATUS DVI: No Signal HDMI: No Signal VGA: Active Auto-Switch Source: Off Default Source: VGA Recommended Settings: 1920 x 1080 - 60 Hz I only have VGA cables, so I do not use DVI or HDMI to connect monitor to