Upgrade Call Manager from 8.5(1) to 10.5(1) and migrate from MCS to UCS...
We are upgrading UCM from 8.5(1) to 10.5(1) and migrating from MCS to UCS. We used UCM 8.5 OVA (7500 user) and migrated to UCS.
Once migrated to UCS we upgraded UCM to 10.5(1). We wanted to use OVA to accommodate 10,000 users, hence took backup of 10.5(1) cluster and installed new servers with new 10.5(1) OVA (10,000 users).
While doing DRS restore, system we were not able to perform a restore. It seems UCM is not recognizing the XML file. It is strange as we took the back from UCM 10.5(1) and trying to restore same version, only difference is upgrade was done with 7500 user OVA and we are now trying to install 10,000 user OVA.
Has anyone run into similar issue? any help will be great.
Thank You.
This thread is 5 months old but doesn't seem resolved...
I ran into this same scenario last week. Was using the same SFTP server for backups and restores during migration from 7.1(5) to 10.5 and during final rebuild/restore of the "to-be" production 10.5 Publisher, the DRS server was unresponsive and blamed the Master Agent or SFTP server. I had restarted Master and Local agent repeatedly, and regenerated ipsec certs to no avail.
TAC suggested I try a different SFTP server (which I already had, with the same files), and try deleting the .xml files that were included with the backup (drfComponent.xml and processhost.xml). I installed TitanFTP, per TAC's recommendation, deleted the processhost.xml file, regenerated the ipsec certificate one last time, restarted DRF Master, and then DRF Agent, and was able to start a DRS Restore.
Try the above process if you're still having issues.
Similar Messages
-
Hello All,
our company is planning to upgrade Cisco Call manager 5.0 to version 8. Can you please help me out what the procedure will be. Or also what the steps i need to follow to upgrade from 5 to 8.Hi ,
For upgrading call manager from version 5 to 8 , u need to consider the following steps:
a. you need to have valid ESW and UCSS contract since this would be a major upgrade.
b. Check for existing Hardware since DRAM and HDD requirements are different for version 8.0(3) and above.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
c. you also need to check the software compatibility matrix.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
regds,
aman -
Upgrade Call Manager 6.5
Hello Team,
Just to get confirmation about the MCS Servers 7800 Series that is it recommanded to upgrade Call Manager 6.5 which is running
on MCS 7800 Series Server to Call Manager 9. CM-9 us fully unified.
Thanks,Supported Servers for Releases of Cisco Unified Communications Manager (Including Business Edition 3000/5000/6000 and Session Manager Edition) and Cisco Intercompany Media Engine
http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi. I believe All my settings are correct. Device is recognized and sync From iPad is possible. Tablet is past warranty, so TechSup won't help. Any suggestions?
Thank you Meta, but I could not get the calendar and contact sync with Gmail to work. Apple support already suggested to use Google or a Windows PC. Maybe I should actually reset and try my old Windows PC. Seriously, ... can this be the solution after a Mac OS update for pure Apple users?
-
can't download mountain lion from app store, shows error message: retry/cancel and starts from begining,
I alreasy paid for it
Can I get a direct download link other than from app storeTry opening the Terminal utility in your system and running the following command to open the system's caches folder:
open $TMPDIR../C
Then locate and remove the folder called "com.apple.appstore" and then try relaunching the App Store and downloading the installer again. -
ACS4 installation and migration from ACS3
Question: Has anyone installed ASC4 and migrate from ACS3? Any problems, concerns?
The installation of ASC4 would happen on the same server as the current ASC3 correct?
Since you will need to restart the JBOSS etc for configuration changes. This means that ASCS3 could suffer some downtime?See,
to read how we performed the upgrade and see some issues:
http://www.oracle.com/technology/products/forms/index.html
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
http://www.oratransplant.nl/category/oracle/forms/6i-to-10g-upgrade/
Good Luck!! -
Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK. Something about the Migration Assistant is being missed, but I have no idea what it is.
HelpAddendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar? -
Upgrade Call Manager from 8.6.2 to 10.5
Hello All,
We are planning to upgrade a Cisco Call Manager Publisher node from 8.6.2 to 10.5. We want to install a new publisher on a new environment, but we are struggling with some questions.
If we install the Pub node 10.5 can we migrate the configuration from the 8.6.2 to 10.5? Do we need a special tool for this?
If above doesn't work, we can still migrate the existing call manager towards the new servers and start the upgrade, the only problem we face there is that we have to change the publisher's IP because we want to use a new ip addressing scheme.
Kr,
Yannick VranckxYour best bet is to use the new tool: cisco prime collaboration deployment. This fits perfectly into what you want to do here and can easily help you with all aspect of the migration including the ip address change. You can learn how to use the tool here..
https://www.youtube.com/watch?v=JzG4kz1_hL4 -
Upgrading call manager from version 8 to 9
Hi All
Can anyone please tell me the summary steps on what I need to do to go from call manager version 8 to version 9?
many thanks
CarlThe answer to your question, is that they entirely depend on you exact CUCM versions, asking here and just saying "8 "does not work. You will need to do your due diligence, and read:
A) Upgrade guide for your target version
B) Release Notes
C) New and changed doc, if not included in the RNs already
They will provide you with ALL you need to perform the upgrade, pre-reqs, procedure, and post-upgrade changes to the VM. All the information is available on cisco.com under the CUCM main documentation site.
Once you've been thru those, you can come back with any further questions. -
can anyone help me get all of my edited holiday video visible again? my mac upgraded itself from iPhoto where i keep my imported video and photos, to "photo" now all of my current project (and probably old ones as well! ) are showing media offline. how can i get this back seeing the clips on 'photo'?
When you open a project you need to point PPro to the new media location and relink
>mac upgraded itself from iPhoto
THAT is not good... I am Windows, but at least a Windows update gives ME the option of unchecking an update -
Upgrade and migration from Netware to Linux best practice
Hi folks,
We've been running NSM 2.5 for a few years on Netware and have been very satisfied with the product and performance. We are planning to migrating to SLES11 with OES11 very soon to finally move away from Netware and I have some issues I can't seem to find answers to. Of course I want to use NSM to move my home directories from my Netware to my SLES so I want this working well when we migrate.
I've searched but not found a good resource to show how to move the NSM engine from a Netware server to a Linux server with best practices. Anyone have experience with this and any gottchas?
The other question is of course is to upgrade NSM to a new version before or after the move to Linux/OES11? We are at Ver 2.5.0.43 and want to move to the latest version. Upgrade procedure and best practices would be handy.
The last of course is NSM compatible with SLES/OES11? I presume it is and certainly hope so because we want to move all of our users to SLES11 NSS.On 5/9/2012 11:06 AM, jlauzon wrote:
>
> Hi folks,
> We've been running NSM 2.5 for a few years on Netware and have been
> very satisfied with the product and performance. We are planning to
> migrating to SLES11 with OES11 very soon to finally move away from
> Netware and I have some issues I can't seem to find answers to. Of
> course I want to use NSM to move my home directories from my Netware to
> my SLES so I want this working well when we migrate.
> I've searched but not found a good resource to show how to move the NSM
> engine from a Netware server to a Linux server with best practices.
> Anyone have experience with this and any gottchas?
The NSM 3.0.x Engine setup process actually handles the migration from
NSM 2.5 fairly easily. Our 3.0 Installation Guide (available at
http://www.novell.com/documentation/storagemanager3 ) includes all the
information you should need regarding migration, including the
suggestions I'll list here.
You'll want to leave NSM 2.5 running during the migration so that the
NSM 3.0 setup wizard can connect to that Engine and import its policies
and pending events. You'll also want to have as few pending events as
possible in NSM 2.5 -- deferred deletes are fine, but all pending events
will slow down the migration process, since they'll have to be
transferred over.
> The other question is of course is to upgrade NSM to a new version
> before or after the move to Linux/OES11? We are at Ver 2.5.0.43 and want
> to move to the latest version. Upgrade procedure and best practices
> would be handy.
Again, this information is available in the 3.0 Installation Guide. To
migrate from 2.5 to 3.0.x, you'll have to have at least one OES11 server
in your tree to install it on; but you'll also have to leave the NSM 2.5
Engine running on its Netware host long enough to migrate from it.
> The last of course is NSM compatible with SLES/OES11? I presume it is
> and certainly hope so because we want to move all of our users to SLES11
> NSS.
We are about to release version 3.0.4 of NSM, which provides full
support for OES11 on SLES11. The NFMS Support Team can also provide you
with builds of NSM 3.0.3 which support OES11; if you need those for
early testing, please send an email to storagemanager[at]novell[dot]com.
Hope this helps!
- NFMS Support Team -
Upgrade 11.5.10.2 to R12 and migrate from linux 32-bit to linux 64-bit
Dear all ,
I have two servers :
1. OS . Redhat 4 32-bit have the EBS 11.5.10.2 .
2. OS . Oracle Linux 5.3 64-Bit have the DB 10.2.0.5 .
i want to upgrade the EBS to R12 and migrate it on another server 64-Bit .
Can you provide me please with the steps for this with the notes number.
and should i run the upgrade first or migrate first.
should i download R12 32-bit or 64-bit for linux .
where should i run the rapidwiz .
Note : the DB will stay on the same server and wont change anything on it.
Thanks. waiting your reply.965322 wrote:
Dear all ,
I have two servers :
1. OS . Redhat 4 32-bit have the EBS 11.5.10.2 .
2. OS . Oracle Linux 5.3 64-Bit have the DB 10.2.0.5 .
i want to upgrade the EBS to R12 and migrate it on another server 64-Bit .
Can you provide me please with the steps for this with the notes number.
and should i run the upgrade first or migrate first.
should i download R12 32-bit or 64-bit for linux .
where should i run the rapidwiz .
Note : the DB will stay on the same server and wont change anything on it.
Thanks. waiting your reply.I would suggest the following:
1) Upgrade the database to 11.2.0.3
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0) [ID 881505.1]
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
2) Install R12 (64-bit) and upgrade to 12.1.1 on Node 1 after you install a 64-bit OS
Oracle E-Business Suite Installation Guide Using Rapid Install
http://docs.oracle.com/cd/E18727_01/doc.121/e12842/toc.htm
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
3) Upgrade to 12.1.3
Oracle E-Business Suite Release 12.1.3 Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_1213_available
Note: Please make sure you back up your 11i Apps tier files before you install 64-bit OS on Node 1. In case you have CUSTOM_TOPs you need to copy them to Apps R12 Apps tier (APPL_TOP) which can done before or after the upgrade.
Thanks,
Hussein -
I have an older macbook 2.1 intel OSX 10.6.8 that I want to wipe clean and then migrate from my macbbok pro with OSX10.6.8 to the older macbook, is it possible ,how would I do it..especially how do I wipe clean the older macbook?
Connecting to a TV is no different than connecting to any other external display. It's possible that there's a problem with the mini dvi port on the macbook r that you have bad adapters. You might try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Does the Macbook recognize that there's an external display connected when you look at the Display preference pane? -
Oracle 10G Installation and Migration from 6i to 10G and
I never had the opportunity to Install or Migrate oracle any version.
We are in the process of Installing Oracle 10G and moving Oracle Forms and Reports from 6i to 10G. I am asked by my superiors to conduct the interviews and decide which candidate will be best. These are temporary positions but are very important as a wrong candidate will affect the entire project. Need the right candidate.
I would like some hints or suggestion as to what skills should I test or what questions to ask.
Any sites or any questions will help me.
Thanks to AllSee,
to read how we performed the upgrade and see some issues:
http://www.oracle.com/technology/products/forms/index.html
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
http://www.oratransplant.nl/category/oracle/forms/6i-to-10g-upgrade/
Good Luck!! -
Login Error after installing Lion and migrating from time machine
I cannot log into Lion under my user setting, I am getting the error: "You are unable to login to the File Vault User account {name} at this time."
Apparently I did not turn off file vault before upgrading to Lion and when I set up Lion I did not migrate from time capsule because it was not finding it even thought the firewire was plugged in so I went ahead and filled out my name and set up a password. I was in Lion and attached the external drive and finally it read it so I migrated the information. I'm not sure if I didn't check the transfer "user" box or the Lion password does not match my File Vault password but now I cannot get into Lion.
I contacted Apple Support and they told me I would not be able to access my old user info because it is locked. I tried to reinstall Lion and get back to the screen where it prompts me for a password so I could change it to my file vault password and cannot get back to that screen. I also cannot create a new user - I can only use guest.
I tried reset password from the terminal and this did not work.
Is there any way I can do a clean Lion install and try the migration again to make sure the passwords and user box is checked?
Please help... I'm desperate!You say Downloads folder has never been excluded and you can't find the Downloads Folder. Do this... OpenFinder then in Finder select your Downloads Folder, open Time Machine if your Downloads Folder has been backed up, Time Machine will take you directly to your Downloads Folder backups.
Maybe you are looking for
-
Hi all, I take wildlife photos (mostly birds) as a hobby, and have become frustrated with the quality of my photos recently when shared online, particularly Facebook. I started blaming my camera ( a Canon 7D) as I changed it a few months ago from a C
-
Share iCal among all the users on one iMac
I guess this is impossible, but I'll ask anyway. My family shares one iMac in the family room. We all have our own login profiles and we want to have a shared calender so we can see when and when we all have plans... Is this too much to ask for from
-
I did a new install and went for the ext4 option, I installed everything I usually do but went with nvidia-xcofig rather than the usual Xorg -configure, now having set everything up all I get is a blank screen, I cant ctrl alt backspace to get to con
-
Anyone else have uneven lid when macbook is closed???
when i close my macbook the is raised a tad more on the right side than the left.....it is raised maybe a millimeter more than the left side....anyone else have this probelm and know how to fix it??
-
Email adress used to send the password after a password reset
Hi, I finally got the ampassword webapp to email the new password. Now emails are being sent by a Lotus Notes server. This server is reached thanks to sendmail. I'd like to know where I can configure the email address of the sender of the mail Thanks