Upgrade Call Manager from 8.6.2 to 10.5
Hello All,
We are planning to upgrade a Cisco Call Manager Publisher node from 8.6.2 to 10.5. We want to install a new publisher on a new environment, but we are struggling with some questions.
If we install the Pub node 10.5 can we migrate the configuration from the 8.6.2 to 10.5? Do we need a special tool for this?
If above doesn't work, we can still migrate the existing call manager towards the new servers and start the upgrade, the only problem we face there is that we have to change the publisher's IP because we want to use a new ip addressing scheme.
Kr,
Yannick Vranckx
Your best bet is to use the new tool: cisco prime collaboration deployment. This fits perfectly into what you want to do here and can easily help you with all aspect of the migration including the ip address change. You can learn how to use the tool here..
https://www.youtube.com/watch?v=JzG4kz1_hL4
Similar Messages
-
Upgrading call manager from version 8 to 9
Hi All
Can anyone please tell me the summary steps on what I need to do to go from call manager version 8 to version 9?
many thanks
CarlThe answer to your question, is that they entirely depend on you exact CUCM versions, asking here and just saying "8 "does not work. You will need to do your due diligence, and read:
A) Upgrade guide for your target version
B) Release Notes
C) New and changed doc, if not included in the RNs already
They will provide you with ALL you need to perform the upgrade, pre-reqs, procedure, and post-upgrade changes to the VM. All the information is available on cisco.com under the CUCM main documentation site.
Once you've been thru those, you can come back with any further questions. -
We are upgrading UCM from 8.5(1) to 10.5(1) and migrating from MCS to UCS. We used UCM 8.5 OVA (7500 user) and migrated to UCS.
Once migrated to UCS we upgraded UCM to 10.5(1). We wanted to use OVA to accommodate 10,000 users, hence took backup of 10.5(1) cluster and installed new servers with new 10.5(1) OVA (10,000 users).
While doing DRS restore, system we were not able to perform a restore. It seems UCM is not recognizing the XML file. It is strange as we took the back from UCM 10.5(1) and trying to restore same version, only difference is upgrade was done with 7500 user OVA and we are now trying to install 10,000 user OVA.
Has anyone run into similar issue? any help will be great.
Thank You.This thread is 5 months old but doesn't seem resolved...
I ran into this same scenario last week. Was using the same SFTP server for backups and restores during migration from 7.1(5) to 10.5 and during final rebuild/restore of the "to-be" production 10.5 Publisher, the DRS server was unresponsive and blamed the Master Agent or SFTP server. I had restarted Master and Local agent repeatedly, and regenerated ipsec certs to no avail.
TAC suggested I try a different SFTP server (which I already had, with the same files), and try deleting the .xml files that were included with the backup (drfComponent.xml and processhost.xml). I installed TitanFTP, per TAC's recommendation, deleted the processhost.xml file, regenerated the ipsec certificate one last time, restarted DRF Master, and then DRF Agent, and was able to start a DRS Restore.
Try the above process if you're still having issues. -
Hello All,
our company is planning to upgrade Cisco Call manager 5.0 to version 8. Can you please help me out what the procedure will be. Or also what the steps i need to follow to upgrade from 5 to 8.Hi ,
For upgrading call manager from version 5 to 8 , u need to consider the following steps:
a. you need to have valid ESW and UCSS contract since this would be a major upgrade.
b. Check for existing Hardware since DRAM and HDD requirements are different for version 8.0(3) and above.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
c. you also need to check the software compatibility matrix.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
regds,
aman -
Upgrade Call Manager 6.5
Hello Team,
Just to get confirmation about the MCS Servers 7800 Series that is it recommanded to upgrade Call Manager 6.5 which is running
on MCS 7800 Series Server to Call Manager 9. CM-9 us fully unified.
Thanks,Supported Servers for Releases of Cisco Unified Communications Manager (Including Business Edition 3000/5000/6000 and Session Manager Edition) and Cisco Intercompany Media Engine
http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Hi There,
I am about to upgrade our Oracle Enterprise Manager OMS from 10.2.0.5 to 11.1. I'm trying to figure out which document to use. I have the SQL Server Plugin installed on our OMS and I'm wondering if this is concidered an add-on. If this is the case I should follow the document: Oracle enterprise manager grid control advanced installation and configuration guide and follow: upgrading enterprise manager grid control with add-ons? Correct?
Thanks,
Juser560159 wrote:
Hi There,
I am about to upgrade our Oracle Enterprise Manager OMS from 10.2.0.5 to 11.1. I'm trying to figure out which document to use. I have the SQL Server Plugin installed on our OMS and I'm wondering if this is concidered an add-on. If this is the case I should follow the document: Oracle enterprise manager grid control advanced installation and configuration guide and follow: upgrading enterprise manager grid control with add-ons? Correct?
Thanks,
JAs 12C is also launched , may be you can wait for some time and directly go for 12C. Because in 10.2.0.5 and 11.1 , we don't have much difference functionality wise.
Apart from Oracle Docs which you mentioned , you can also have a look at MOS note :
FAQ: Grid Control 11g Install / Upgrade Frequently Asked Questions [ID 1073184.1]
Thanks
Rajesh -
Error upgrading identity manager from 6.0 to 7.1 - help!!!
Hi all,
When upgrading from 6.0 to 7.1, I get error below when i am trying to access the approval form by going to workitems->approval->click on one of the items in the inbox. Throws a nullpointer exception...see below....
Alex and other experts pls help!!!
Error
An unrecoverable error has occurred processing the request. Contact your system administrator.
Syslog ID = LG-0223-155056.
java.lang.NullPointerException
at com.waveset.ui.util.PageProcessor.generateHTML(Ljava/lang/Throwable;)Ljava/lang/String;(PageProcessor.java:669)
at com.waveset.ui.util.PageProcessor.generateHTML()Ljava/lang/String;(PageProcessor.java:738)
at jsp_servlet._user.__workitemedit._jspService(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V(__workitemedit.java:921)
at weblogic.servlet.jsp.JspBase.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava/lang/Object;(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lweblogic/servlet/internal/FilterChainImpl;)V(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V(ServletStubImpl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava/lang/Object;(WebAppServletContext.java:6985)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic/security/subject/AbstractSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic/servlet/internal/ServletRequestImpl;Lweblogic/servlet/internal/ServletResponseImpl;)V(WebAppServletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic/kernel/ExecuteThread;)V(ServletRequestImpl.java:2766)
at weblogic.kernel.ExecuteThread.execute(Lweblogic/kernel/ExecuteRequest;)V(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:183)
at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread;)V(Unknown Source)
thanks a lot!
vikAlex,
Thanks a lot for the quick reply. I did a whole lot of things. I cleaned up the work directory in weblogic. Also, I did upgrade using the supplied scripts (upgradeto71from60.oracle). When I turned on the trace, this is the exact stack trace from the logs ( see below). Will installing the 7.1 Update 1 help? Right now I am at 7.1 without any updates. Also, I cant access the link for Update 1 Patch 10. Can you please point me to the download area...thanks!
20090220 13:15:28.154 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML() Exit void
20090220 13:15:31.740 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML() Entry no args
20090220 13:15:31.740 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Component) Entry arg1=root=com.waveset.ui.util.html.HtmlPage@40fd3dd
20090220 13:15:31.740 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) WavesetProperties#getString() Entry arg1=name=ui.Renderer
20090220 13:15:31.740 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) WavesetProperties#getProperty() Entry arg1=name=ui.Renderer
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) WavesetProperties#getProperty() Exit returned= null
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) WavesetProperties#getString() Exit returned= null
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) HtmlPage#toHTML(Renderer) Entry arg1=b=
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Component) Catch java.lang.NullPointerException
at com.waveset.ui.util.html.Component.getString(Lcom/waveset/ui/util/RequestState;Ljava/lang/Object;)Ljava/lang/String;(Component.java:744)
at com.waveset.ui.util.html.HtmlPage.generateJavascript(Lcom/waveset/ui/util/RequestState;Lcom/waveset/ui/util/html/HtmlBuffer;)V(HtmlPage.java:466)
at com.waveset.ui.util.html.HtmlPage.toHTML(Lcom/waveset/ui/util/html/Renderer;)V(HtmlPage.java:654)
at com.waveset.ui.util.html.Renderer.renderHtmlPage(Lcom/waveset/ui/util/html/HtmlPage;)V(Renderer.java:786)
at com.waveset.ui.util.html.HtmlPage.render(Lcom/waveset/ui/util/html/Renderer;)V(HtmlPage.java:548)
at com.waveset.ui.util.PageProcessor.generateHTML(Lcom/waveset/ui/util/html/Component;)Ljava/lang/String;(PageProcessor.java:600)
at com.waveset.ui.util.PageProcessor.generateHTML()Ljava/lang/String;(PageProcessor.java:726)
at jsp_servlet._user.__workitemedit._jspService(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V(__workitemedit.java:921)
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Throwable) Entry arg1=t=java.lang.NullPointerException
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Throwable) Data msg== java.lang.NullPointerException
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Throwable) Entry arg1=t=java.lang.NullPointerException
20090220 13:15:31.742 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Throwable) Data msg== java.lang.NullPointerException -
Ringtones and background images not available after call manager upgrade
Hi,
We have upgraded our call manager from version 8.5 to 10.5. Once after the upgrade we lost all the Ringtones and background images except the two default ringtone and background images. we got 8945 sccp phones(running 9-3-1 firmware) and 9951 sip phones(running 9-4-1 firmware). Both these phones lost these list. However the ringlist.xml is available in the tftp server with all the ringtones and the phones are pointed to the right tftp servers. I tried to restart the tftp servers and tried again, however that didn't help. we are using call manager 10.5 and h323 voice gateway. Could anyone please help on this.
Thanks
BarryHi Tony,
I can see the ringtone files in the call manager (osadmin>tftp file mgmt), i have also restarted the tftp services, but it didn't help. I believe you advised to re-upload the ringlist file (Ringlist.xml) and try again. I will try this and update you. Please let me know if you have any other suggestions.
Thanks
Barry -
Call Manager 8.0 to 9.1 upgrade
We are currently running Call Manager 8, UCCE 8, and CVP 8. ICM/CTI 8.
We would like to upgrade Call Manager 8 to 9.1 first before upgrading UCCE, CVP, etc., it could be months before these are upgraded.
Does anyone know or foresee any issues if UCCE, CVP, etc., are not upgraded right away after CM is upgraded?
Any comment is appreciated. Thanks.Look at the UCCE compatibility matrix as you need the exact versions to find out whether they will work together, of ir you'll need a single window on which to upgrade all.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Upgrade to R2 from SCOM 2012 SP 1 UR 4 - Final configuration failed to install
I was upgrading our test SCOM 2012 SP1 UR 4 sever to R2 and ran into the following issue:
Setup cannot be completed… Final configuration failed to install.
Everything else upgraded fine.
There was no rollback performed…. The log states “Skipping rollback for install item Final Configuration as it was not successfully installed”
Looking in OpsManagerSetupWizard.log in the section for Final Configuration I see the following:
[16:00:43]: Always: :!***** Installing: POSTINSTALL ***
[16:00:43]: Info: :SetProgressScreen: StartMinorStep.
[16:00:43]: Warn: :ApplyUpdates: Unable to load QFE file.
[16:00:43]: Always: :Doing Preinstall task for POSTINSTALL
[16:00:43]: Warn: :CheckAndLoadUpdateFiles: Unable to load QFE file.
[16:00:43]: Always: :Doing Install task for POSTINSTALL
[16:00:44]: Debug: :DoInstallTask: Found Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall;PostInstallProcessor as type and method.
[16:00:44]: Info: :Type: Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall Method: PostInstallProcessor
[16:00:44]: Info: :SetProgressScreen: Init Exe Install progress.
[16:00:44]: Info: :AddUninstallChangeEntry: Cleaning out existing files at the ARP file cache location D:\Program Files\System Center 2012\Operations
Manager\Setup
[16:00:44]: Error: :InstallActionProcessor.DoInstallTask: method PostInstallProcessor threw exception. We will return installSuccessful = false.:
Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[16:00:44]: Error: :StackTrace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.SystemCenter.Essentials.SetupFramework.InstallActionProcessor.DoInstallTask(InstallItemsInstallDataItem itemToInstall)
[16:00:44]: Error: :Inner Exception.Type: System.UnauthorizedAccessException, Exception Error Code: 0x80131604, Exception.Message: Access to the path 'EULA_EN_EVAL.RTF'
is denied.
[16:00:44]: Error: :InnerException.StackTrace: at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive, Boolean
throwOnTopLevelDirectoryNotFound)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ARPFileCache()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.AddUninstallChangeEntry()
at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall.PostInstallProcessor(Func`3 setProgressScreen)
[16:00:44]: Error: :ProcessInstalls: Install Item Final Configuration failed to install. We did not launch the post process delegate.
[16:00:44]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Final Configuration
[16:00:44]: Info: :SetProgressScreen: FinishMinorStep.
[16:00:44]: Always: :****************************************************************
[16:00:44]: Always: :****Starting*RollBack*******************************************
[16:00:44]: Always: :****************************************************************
[16:00:44]: Info: :SetProgressScreen: StartMinorStep.
[16:00:44]: Always: :ProcessRollback: Skipping rollback for install item Final Configuration as it was not successfully installed.
[16:00:44]: Always: :****************************************************************
[16:00:44]: Always: :****Ended*RollBack**********************************************
[16:00:44]: Always: :****************************************************************
[16:00:44]: Always: :Entering Page: FinishPage
The log states “Access to the path 'EULA_EN_EVAL.RTF' is denied.” I was able to find this file in D:\Program Files\System Center 2012\Operations Manager\SetupTemp\EN, but when viewing its contents I see it
was from the SP 1 upgrade as it starts off with “MICROSOFT EVALUATION SOFTWARE LICENSE TERMS MICROSOFT SYSTEM CENTER 2012 STANDARD SERVICE PACK 1.” Based on everything else referenced in the log file previously, it seems like it was trying to locate
this file in D:\Program Files\System Center 2012\Operations Manager\Setup. Also, I applied the product key after installing SP1 previously, so it was not running with an evaluation license.
Running Get-SCOMManagementGroup | ft skuforlicense, version, timeofexpiration –a
gives me:
SkuForLicense Version TimeOfExpiration
Retail 7.1.10226.0 12/31/9999 11:59:59 PM
The version (7.1.10226.0) is that of SCOM 2012 R2 (as I noted before, there was no rollback.) Everything seems to be functioning fine (Console, Web Console, Reporting Services.)
Is there a way to get it to re-run only the Final Configuration steps (which will probably fail again as the EULA file does not exist where it expects it)? I am not sure if there were supposed to be any further
configuration steps that did not get completed, so i dont know how stable SCOM is now. Should I re-run the R2 installer? Or is it OK as is? The only info online about a SCOM Install where the final configuration failed to install dealt with
an error upgrading the SCOM Console, which is not relevant to my situation. This is my test SCOM environment, running on a VM. I could revert to the pre-upgrade snapshot and see if another upgrade attempt completes successfully, but if that does
work I am concerned that something like this may happen in my prod environment, which is not running on a VM, so has no ability to revert to a snapshot.Hi,
Please refer to the following links:
Do I need a specific Cumulative Update Release (UR) in order to upgrade to SCOM 2012 or 2012 SP1 or 2012 R2?
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Upgrading Operations Manager from 2012 SP1 to 2012 R2 step by step
http://www.systemcentercentral.com/upgrading-operations-manager-from-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+systemcenterforum+%28System+Center+Central+Rollup%29
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I want to move the Call manager from one domain to another, if I do that do I need to relicense the call manager? Thanks
Wrong forum, post in "voice - IP Telephony". You can move your post using the actions panel on the right.
-
I recently tried to upgrade my call manager in a lab environment from 9.1.1 to 9.1.2 but failed. The error stated that connection had been lost after 2 hours into it. Connect using CLI. Any help would be greatly appreciated.
SteveYou mean via GUI??
What does the upgrade status via CLI says?? -
Cisco Call Manager Upgrade from Ver 5.1.3 to Ver 8.6
Hi ,
My organization have 4 Subscribers and 1 publisher between 4 different sites. version of all call manager are 5.1.3. all are running on HP Proliant server.
I looking to upgrade to Version 8.6. Do I need to upgrade server hardware as well for upgrading latest version of call manager or I can use my old server ?
Thanks
Amit SharmaHi GP,
Thanks for your reply.
Please find below the hardware details of my old server. these details I get from Cisco call manager application.
Hardware Resources
Hardware platform type 7835H
The CPU type Intel(R) Xeon(TM) CPU 3.40GHz
Memory 2048 Mbytes
Detailed Report
Machine_Type = XXXX
Model_Number =
Serial_Number = GB8637LRFE
Product_Name = ProLiant DL380 G4
BIOS_Version =
BIOS_Build_Level = P51
BIOS_Date = 04/26/2006
BIOS_Manufacturer = HP
BIOS_Language =
Number_Of_Enclosures =
Enclosure_Type.0 =
Processor_Slots = 2
Active_Processors = 1
Processor_Family.0 = Xeon
Processor_Speed_MHz.0 = 3400
Total_Enabled_Memory_Mb = 2048
ROM_Diagnostics_Build_Level =
Thanks
Amit -
Hi
What is the procedure of Call Manager upgrade from version CUCM 7.1 (MCS Server) to version CUCM 10.2 (on UCS server) , please let me know the steps to what would be the backup procedures and upgrades.
Regards
GauravI'd suggest reading this guide to make sure you have prepared your environment to support 10.x first. The link below also contains the upgrade path to 10.0(1).
One of the ways you can do this is:
1/ Apply refresh upgrade cop file on all servers in cluster.
2/ Upgrade the cluster to 8.6(2). Take a backup of the cluster.
3/ Build a cluster of 8.6(2) servers on VMs, and assign them the same hostnames and IP address as the hardware cluster. (You may need to keep these on a separate network until switching off the hardware machines)
4/ Restore the backup taken from the hardware cluster on to the VM cluster.
5/ Upgrade VM cluster to 10.0(1).
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100_chapter_010.html#CUCM_RF_UA60AFAB_00 -
Hi All, looking for some assistance with the following issue.
We are attempting to upgrade our Operations Manager 2012 SP1 environment to Operations Manager 2012 R2.
We have completed all the pre-upgrade tasks detailed here
http://technet.microsoft.com/en-us/library/dn249704.aspx
We are then following the guidance detailed here regarding upgrading distributed management groups
http://technet.microsoft.com/en-us/library/dn249721.aspx. The upgrade fails on the first management server with the following screen being displayed.
OMServer.log file is as follows.
=== Verbose logging started: 22/01/2014 10:21:27 Build type: SHIP UNICODE 5.00.9200.00 Calling process: C:\Users\scomaction\AppData\Local\SCOM\Setup\SetupChainerUI.exe ===
MSI (c) (78:34) [10:21:27:040]: Resetting cached policy values
MSI (c) (78:34) [10:21:27:040]: Machine policy value 'Debug' is 0
MSI (c) (78:34) [10:21:27:040]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (c) (78:34) [10:21:27:040]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (78:34) [10:21:27:040]: Grabbed execution mutex.
MSI (c) (78:34) [10:21:27:071]: Cloaking enabled.
MSI (c) (78:34) [10:21:27:071]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (78:34) [10:21:27:071]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:082]: Running installation inside multi-package transaction F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:30) [10:21:27:082]: Grabbed execution mutex.
MSI (s) (D4:A0) [10:21:27:086]: Resetting cached policy values
MSI (s) (D4:A0) [10:21:27:086]: Machine policy value 'Debug' is 0
MSI (s) (D4:A0) [10:21:27:086]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (s) (D4:A0) [10:21:27:175]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (D4:A0) [10:21:27:181]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:190]: SRSetRestorePoint skipped for this transaction.
MSI (s) (D4:A0) [10:21:27:192]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (D4:A0) [10:21:27:200]: File will have security applied from OpCode.
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi' against software restriction policy
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi has a digital signature
MSI (s) (D4:A0) [10:21:27:354]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (D4:A0) [10:21:27:354]: MSCOREE not loaded loading copy from system32
MSI (s) (D4:A0) [10:21:27:360]: End dialog not enabled
MSI (s) (D4:A0) [10:21:27:360]: Original package ==> F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:A0) [10:21:27:360]: Package we're running from ==> C:\Windows\Installer\4b8344.msi
MSI (s) (D4:A0) [10:21:27:371]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:378]: Machine policy value 'TransformsSecure' is 1
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisablePatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:380]: Transforms are not secure.
MSI (s) (D4:A0) [10:21:27:380]: Note: 1: 2205 2: 3: Control
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log'.
MSI (s) (D4:A0) [10:21:27:380]: Command Line: OM_INSTALLDIR=F:\Program Files\Microsoft System Center 2012 R2\Operations Manager SEND_CEIP_REPORTS=0 MU_SETTING=0 ROOT_MANAGEMENT_SERVER_PORT=5723 SC_DB_SERVER=SCOM-XXX-AG SCDATABASENAME=OperationsManager DW_DB_SERVER=SCOM-XXX-AG DWDATABASENAME=OperationsManagerDW REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Users\scomaction\AppData\Local\SCOM\Setup CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=4472
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{58EFE971-58C1-4DBD-A400-A7607A745475}'.
MSI (s) (D4:A0) [10:21:27:380]: Product Code passed to Engine.Initialize: ''
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table before transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table after transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product not registered: beginning first-time install
MSI (s) (D4:A0) [10:21:27:380]: Product {C92727BE-BD12-4140-96A6-276BA4F60AC1} is not managed.
MSI (s) (D4:A0) [10:21:27:380]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (D4:A0) [10:21:27:381]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (D4:A0) [10:21:27:381]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (D4:A0) [10:21:27:381]: Adding new sources is allowed.
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:381]: Package name extracted from package path: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:381]: Package to be registered: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:383]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableMsi' is 1
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (D4:A0) [10:21:27:383]: Running product '{C92727BE-BD12-4140-96A6-276BA4F60AC1}' with elevated privileges: Product is assigned.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding OM_INSTALLDIR property. Its value is 'F:\Program Files\Microsoft System Center 2012 R2\Operations Manager'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding ROOT_MANAGEMENT_SERVER_PORT property. Its value is '5723'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Modifying SC_DB_SERVER property. Its current value is 'OperationsManager'. Its new value: 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DW_DB_SERVER property. Its value is 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DWDATABASENAME property. Its value is 'OperationsManagerDW'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Setup'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '4472'.
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (D4:A0) [10:21:27:383]: RESTART MANAGER: Disabled by MSIRESTARTMANAGERCONTROL property; Windows Installer will use the built-in FilesInUse functionality.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: TRANSFORMS property is now:
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (D4:A0) [10:21:27:395]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming
MSI (s) (D4:A0) [10:21:27:396]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Favorites
MSI (s) (D4:A0) [10:21:27:398]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (D4:A0) [10:21:27:399]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Documents
MSI (s) (D4:A0) [10:21:27:401]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (D4:A0) [10:21:27:402]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (D4:A0) [10:21:27:404]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (D4:A0) [10:21:27:406]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Local
MSI (s) (D4:A0) [10:21:27:408]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Pictures
MSI (s) (D4:A0) [10:21:27:411]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:413]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:414]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:415]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:417]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (D4:A0) [10:21:27:420]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:421]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:423]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:424]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:426]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Desktop
MSI (s) (D4:A0) [10:21:27:427]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:428]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (D4:A0) [10:21:27:428]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (D4:A0) [10:21:27:433]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\4b8344.msi'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi'.
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: User policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 22/01/2014 10:21:27 ===
MSI (s) (D4:A0) [10:21:27:435]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:436]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (D4:A0) [10:21:27:438]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (D4:A0) [10:21:27:438]: Doing action: INSTALL
Action start 10:21:27: INSTALL.
MSI (s) (D4:A0) [10:21:27:444]: Running ExecuteSequence
MSI (s) (D4:A0) [10:21:27:444]: Doing action: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76
MSI (s) (D4:A0) [10:21:27:447]: PROPERTY CHANGE: Adding SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:448]: Doing action: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76
Action ended 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:450]: PROPERTY CHANGE: Adding System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:450]: Doing action: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6
Action ended 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:452]: PROPERTY CHANGE: Adding WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6.
MSI (s) (D4:A0) [10:21:27:453]: Doing action: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522
Action ended 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6. Return value 1.
MSI (s) (D4:A0) [10:21:27:455]: PROPERTY CHANGE: Adding System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522.
MSI (s) (D4:A0) [10:21:27:456]: Doing action: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522. Return value 1.
MSI (s) (D4:A0) [10:21:27:458]: PROPERTY CHANGE: Adding WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:458]: Doing action: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:461]: PROPERTY CHANGE: Adding SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:461]: Doing action: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:463]: PROPERTY CHANGE: Adding WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:463]: Doing action: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:466]: PROPERTY CHANGE: Adding System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:467]: Doing action: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8
Action ended 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:468]: PROPERTY CHANGE: Adding WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8.
MSI (s) (D4:A0) [10:21:27:469]: Doing action: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9
Action ended 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8. Return value 1.
MSI (s) (D4:A0) [10:21:27:471]: PROPERTY CHANGE: Adding WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
MSI (s) (D4:A0) [10:21:27:472]: Doing action: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE
Action ended 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9. Return value 1.
MSI (s) (D4:A0) [10:21:27:474]: PROPERTY CHANGE: Adding WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE.
MSI (s) (D4:A0) [10:21:27:475]: Doing action: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE. Return value 1.
MSI (s) (D4:A0) [10:21:27:477]: PROPERTY CHANGE: Adding ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\'.
Action start 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4:A0) [10:21:27:477]: Doing action: FindRelatedProducts
Action ended 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
Action start 10:21:27: FindRelatedProducts.
MSI (s) (D4:A0) [10:21:27:481]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT_AGENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _SearchOpsMgrShellPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Doing action: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: FindRelatedProducts. Return value 1.
MSI (s) (D4:08) [10:21:27:501]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI847C.tmp, Entrypoint: SetMonadFilePath
MSI (s) (D4:B0) [10:21:27:502]: Generating random cookie.
MSI (s) (D4:B0) [10:21:27:505]: Created Custom Action Server with PID 4964 (0x1364).
MSI (s) (D4:34) [10:21:27:527]: Running as a service.
MSI (s) (D4:34) [10:21:27:529]: Hello, I'm your 64bit Impersonated custom action server.
Action start 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4!DC) [10:21:27:638]: PROPERTY CHANGE: Modifying MONAD_SHELL_PATH property. Its current value is 'Error: Value Never Set. Check the CACore:SetMonadFilePath CA'. Its new value: 'C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe'.
GetRegistyStringValue: Registy key value found.. C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
MSI (s) (D4:A0) [10:21:27:640]: Doing action: _Set_CORECOMPONENTPRESENT
Action ended 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
MSI (s) (D4:A0) [10:21:27:643]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
Action start 10:21:27: _Set_CORECOMPONENTPRESENT.
MSI (s) (D4:A0) [10:21:27:644]: Skipping action: _AbortDowngradeProductAttempt (condition is false)
MSI (s) (D4:A0) [10:21:27:644]: Doing action: _AbortIncompatibleComponents
Action ended 10:21:27: _Set_CORECOMPONENTPRESENT. Return value 1.
Action start 10:21:27: _AbortIncompatibleComponents.
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5044 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1580 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5512 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 4268 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5024 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 6064 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 3396 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 2704 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5568 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5940 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1968 could not be cancelled. Error: 1168
MSI (s) (D4:A0) [10:21:27:652]: Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
Action ended 10:21:27: _AbortIncompatibleComponents. Return value 3.
Action ended 10:21:27: INSTALL. Return value 3.
Property(S): DiskPrompt = Please Insert Disk 1
Property(S): UpgradeCode = {17058653-A628-4C03-8F80-5E2B179ECD55}
Property(S): SCDATABASENAME = OperationsManager
Property(S): SC_DB_SERVER = SCOM-XXX-AG
Property(S): SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): CORECOMPONENTPRESENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): OM_INSTALLDIR = F:\Program Files\Microsoft System Center 2012 R2\Operations Manager
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): Privileged = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): DONOTSKIPDELETESERVICES = 0
Property(S): DONOTSKIPINSTALLSERVICES = 0
Property(S): OM_COMMON_PRODUCT_REGISTRY_PATH = SOFTWARE\Microsoft\System Center Operations Manager
Property(S): OM_COMMON_PRODUCT_RELEASE_REGISTRY_KEY = 12
Property(S): OM_COMMON_PRODUCT_DEFAULT_INSTALL_DIR = System Center Operations Manager
Property(S): NetFxVersion = v2.0.50727
Property(S): IS_OM_SERVER = 1
Property(S): InstallAPMAgent = 1
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): ARPNOREPAIR = 0
Property(S): ARPURLINFOABOUT = http://www.microsoft.com/mom
Property(S): ARPURLUPDATEINFO = http://www.microsoft.com/mom
Property(S): ARPHELPLINK = http://support.microsoft.com
Property(S): MSIRESTARTMANAGERCONTROL = Disable
Property(S): SQL_PORT = 1433
Property(S): DbSizeGood = 1
Property(S): DbFileOptionsGood = 1
Property(S): DbFilesSpaceGood = 1
Property(S): DbNameGood = 1
Property(S): SqlServicesStarted = 1
Property(S): _SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): DialogWizardTitle = System Center 2012 R2 Operations Manager Setup
Property(S): MinimumOSMsg = This product must be installed on Windows Server 2008 R2 or higher.
Property(S): MOMSDKPortDesc = Operations Manager SDK.
Property(S): MOMConnectorPortDesc = Operations Manager Connector Framework.
Property(S): MOMAEMPortDesc = Operations Manager Application Error Monitoring.
Property(S): MOMSQMPortDesc = Operations Manager Customer Experience Improvement Program.
Property(S): MOMHSPortDesc = System Center Management Health Service
Property(S): SCOMV3SP1ProgramName = System Center 2012 R2 Operations Manager
Property(S): FWRulePingRequestName = Operations Manager Ping Request (Echo Request - ICMPv4 OUT)
Property(S): FWRulePingRequestDesc = Operations Manager network monitoring ping request
Property(S): FWRulePingResponseName = Operations Manager Ping Response (Echo Response - ICMPv4 IN)
Property(S): FWRulePingResponseDesc = Operations Manager network monitoring ping response
Property(S): FWRuleSnmpRequestName = Operations Manager SNMP Request
Property(S): FWRuleSnmpRequestDesc = Operations Manager network monitoring SNMP request
Property(S): FWRuleSnmpResponseName = Operations Manager SNMP Response
Property(S): FWRuleSnmpResponseDesc = Operations Manager network monitoring SNMP response
Property(S): FWRuleSnmpTrapListenerName = Operations Manager SNMP Trap Listener
Property(S): FWRuleSnmpTrapListenerDesc = Operations Manager network monitoring SNMP trap listener
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductCode = {C92727BE-BD12-4140-96A6-276BA4F60AC1}
Property(S): ProductLanguage = 1033
Property(S): ProductName = System Center Operations Manager 2012 Server
Property(S): ProductVersion = 7.1.10226.0
Property(S): SecureCustomProperties = ACTIONSPASSWORD;CORECOMPONENTPRESENT_AGENT;CORECOMPONENTPRESENT_GW;CORECOMPONENTPRESENT_RC;CORECOMPONENTPRESENT_SCE;CORECOMPONENTPRESENT_SMB2;CORECOMPONENTPRESENT_SMRTM;IS_AVICODE_AGENT_INSTALLED;IS_MOMASPAGENT_INSTALLED;MOM_DB_SERVER;MOMDATABASENAME_OLD;OM_NEWER_PRODUCT_FOUND;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650;SQL_PORT
Property(S): MsiHiddenProperties = _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;_SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;ACTIONSPASSWORD;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650
Property(S): WixPdbPath = d:\btvsts\20867\private\product\setup\wix\msi\server\om\obj\amd64\OMServer.wixpdb
Property(S): CORECOMPONENTPRESENT_AGENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): MONAD_SHELL_PATH = C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Property(S): EnableEV.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = 1
Property(S): AddInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = add
Property(S): RemoveInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = remove
Property(S): WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE = C:\Windows\
Property(S): VersionNT = 602
Property(S): DW_DB_SERVER = SCOM-XXX-AG
Property(S): DWDATABASENAME = OperationsManagerDW
Property(S): OMDATABASENAME = OperationsManger
Property(S): MaximumDataAgeMinutes = 10080
Property(S): MaximumQueueSizeKB = 102400
Property(S): MOMSDKPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 5724
Property(S): MOMConnectorPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51905
Property(S): MOMAEMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51906
Property(S): MOMSQMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51907
Property(S): SDK_SERVICE_TYPE = 4
Property(S): ROOT_MANAGEMENT_SERVER_PORT = 5723
Property(S): SERVER_MANAGEMENT_GROUP_TYPE.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = 1
Property(S): MaximumForwardedVirtualQueuePercentage = 8
Property(S): QueueSendDataSinglePriority = 0
Property(S): ADMIN_ROLE_GROUP.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = Administrators
Property(S): USE_MANUALLY_SPECIFIED_SETTINGS = 1
Property(S): WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 = C:\Windows\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): CAN_REGISTER_FOR_MU = 0
Property(S): MU_SETTING = 0
Property(S): IS_ROOT_HEALTH_SERVICE = 0
Property(S): IS_MOM_SERVER = 0
Property(S): IS_MOM_GATEWAY = 0
Property(S): WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 = C:\Windows\
Property(S): WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\
Property(S): System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\system32\
Property(S): DirectoryTable100_amd64.1C11561A_11CB_36A7_8A47_D7A042055FA7 = DirectoryTable
Property(S): WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\
Property(S): SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\SysWOW64\
Property(S): DirectoryTable100_x86.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = DirectoryTable
Property(S): SEND_CEIP_REPORTS = 0
Property(S): System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 = C:\Windows\system32\
Property(S): ACS_AGENT_ACCOUNT.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 =
Property(S): WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 = C:\Windows\
Property(S): SC_COMMON_REGISTRY_PATH = SOFTWARE\Microsoft\System Center\2010\Common
Property(S): DISCOVERY_DATA_AUTHORIZATION_ENABLED = 0
Property(S): IcmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): IcmpRequestType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 8:*
Property(S): IcmpResponseType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0:*
Property(S): SnmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 17
Property(S): SnmpPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 161
Property(S): SnmpTrapPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 162
Property(S): DirectionIn.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0
Property(S): DirectionOut.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\SysWOW64\
Property(S): System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\system32\
Property(S): ADVISOR_UPLOADFREQUENCY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_UPLOADDAY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEHOUR_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEMIN_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_MAXCACHESIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_MAXMAILBOXSIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_ARCHIVEPERIOD_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #5
Property(S): ADVISOR_LOGLEVEL_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #3
Property(S): ADVISOR_NEEDMPINITIALIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_LYNC_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): ADVISOR_SHAREPOINT_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): MsiLogFileLocation = C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log
Property(S): PackageCode = {58EFE971-58C1-4DBD-A400-A7607A745475}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): REBOOT = ReallySuppress
Property(S): CURRENTDIRECTORY = C:\Users\scomaction\AppData\Local\SCOM\Setup
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 4472
Property(S): MsiSystemRebootPending = 1
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 602
Property(S): WindowsBuild = 9200
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\SCOMAC~1\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): AppDataFolder = C:\Users\scomaction\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\scomaction\Favorites\
Property(S): NetHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\scomaction\Documents\
Property(S): PrintHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\scomaction\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\scomaction\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8192
Property(S): VirtualMemory = 7854
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = scomaction
Property(S): UserSID = S-1-5-21-607126847-70518424-489426498-210484
Property(S): UserLanguageID = 2057
Property(S): ComputerName = SCOMMS1-VM
Property(S): SystemLanguageID = 2057
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 10:21:27
Property(S): Date = 22/01/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.17929
Property(S): MsiWin32AssemblySupport = 6.2.9200.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): USERNAME = Windows User
Property(S): DATABASE = C:\Windows\Installer\4b8344.msi
Property(S): OriginalDatabase = F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
MSI (s) (D4:A0) [10:21:27:697]: Note: 1: 1708
MSI (s) (D4:A0) [10:21:27:698]: Product: System Center Operations Manager 2012 Server -- Installation operation failed.
MSI (s) (D4:A0) [10:21:27:698]: Windows Installer installed the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.1.10226.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (D4:A0) [10:21:27:744]: Deferring clean up of packages/files, if any exist
MSI (s) (D4:A0) [10:21:27:744]: MainEngineThread is returning 1603
MSI (s) (D4:30) [10:21:27:744]: No System Restore sequence number for this installation.
=== Logging stopped: 22/01/2014 10:21:27 ===
MSI (s) (D4:30) [10:21:27:746]: User policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D4:30) [10:21:27:747]: Destroying RemoteAPI object.
MSI (s) (D4:B0) [10:21:27:747]: Custom Action Manager thread ending.
MSI (c) (78:34) [10:21:27:748]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (78:34) [10:21:27:749]: MainEngineThread is returning 1603
=== Verbose logging stopped: 22/01/2014 10:21:27 ===
Any assistance anyone can provide will be greatly appreciated.Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Maybe you are looking for
-
When i connect my ipod touch it doesnt recognize it and cant sync
when i connect my new ipod touch to my computer it doesnt recognize it and doesnt sync
-
Is there a limit to the number of books and PDFs one can store in iBooks?
My Bookshelf has about 8 books and more PDFs and today I added an airline timetable and just like that, half of the books and half of the PDFs are gone! Is this normal behavior because of a limitation to the capacity of the Bookshelf? If so, it would
-
Hi Experts, For one of my reports, I need the Open Stock Transport Order Quantity to be displayed. From which table can I get these value from ? Thanks
-
WLK1 Table mandatory field data for DATBI & DATAB missing
Hi ABAPers, I have an issue in production i.e in table WLK1 few records have created which have data missing from mandatory field DATBI & DATAB . Can anyone tell me the reason for that and how to delete those records. Thanks, Soumya .
-
MacMini+x4Zoom ADSL+Sony DCV TRV110e=No Video Conference!
A couple days ago, I bought a MacMini. Everything was ok until I have received a message from ichat saying that "Failed to start Video Chat Because ......(me) didn't respond". Internet is Ok, I don't have a firewall installed MacMini G4 1,42 512 KBps