Upgrade Camera Raw in PSE 7 on a Windows 7 64bit

Hi Guys,
Did anyone try it? I did place the file where it should go but my Panasonic DMC-FZ35 is in versions 5 and up of the plugin and still will not open.
Any suggestions? For now I had to use Silkypix.
Thank you!

Can you please tell which version on camera raw is currently installed on your system and also go through the following link about installing instruction of latest camera raw plugin. Link : http://kb2.adobe.com/cps/407/kb407344.html
thanks

Similar Messages

I edited a .nef file in Camera Raw and PSE 11 saved it as a .xmp file. I cannot open it now.

I edited a .nef file in Camera Raw and PSE 11 saved it as a .xmp file. I cannot open it now.
I am not sure if this is an issue but Windows does not recognize the .xmp file and give it an icon with the photo's picture. On a related note, when I edited some .nef files and Windows saved it as .dng file, it too, like the .xmp file, Windows does not recognize the .dng file and give it an icon with the photo's picture.
Do I need to download something to create this icon?

PSE didn't save your file as an .xmp file. The .xmp file is not the image--that's still the .nef. The xmp file is what adobe calls a 'sidecar' file, just a record of the settings you used in the raw converter. As long as it's in the same place as the image, when you open the nef in ACR again, it will open where you left off, with the settings you chose.
If you want to save as, you have two choices:
1. Click the Open button in the raw converter window and save in the image format of your choice.
2. Use the Save button in the raw converter to create a separate DNG file, which still must be opened in the raw converter and converted to an image format for use in other programs.

Problem using/upgrading camera raw

I have Windows 7/64 bit. When I first installed Photoshop CS5, I immediately upgraded Camera Raw. Later, after opening Bridge from Photoshop, I found I could not get Bridge to open a file in Camera Raw. I knew that Raw was working because I had previously opened an Adobe lesson file using it. When I attempted to open one of my files I received an error message: "Bridge's parent application is not active". I have since learned that Bridge will only open a file in Raw, if Bridge is initiated from the 32bit version of Photoshop (or if the 32bit version of Photoshop is open). OK, I thought I'd solved the problem, ie open both the 32bit and 64bit versions of photoshop and then access to Raw is fine. However, I then decided to upgrade Camera Raw in the 32bit version of Photoshop. When I then attempted to open what I thought was the 32bit version, I got the 64bit version instead and, of course, lost the access to Raw.
I've only learned this after uninstalling and re-installing several times. I'm now not willing to upgrade Camera Raw for fear of losing access to it again. This is not a very satisfactory situation.
Does anyone understand what is going on, and whether there is a work-around?
Thanks
Grahame M

There's nothing wrong here. You only all too quickly updated it. You need to run PS at least once, and open an image via ACR (the one that it installs by default), so it configures itself. Once that has happened, updates should go smoothly without all the higgledy-piggledy. For more specific guidance ask in the ACR and Photoshop forums.
Mylenium

What is the newest version of Adobe camera raw for PSE 11?

Wat is de nieuwste versie van Adobe Camera Raw voor PSE 11? What is the newest version of Adobe Camera Raw for PSE 11?

Camera raw 7.4
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
You should be able to use Help>Updates from within the pse 11 editor to get camera raw 7.4 if you don't already have it.
You can use the 8.7 dng converter if your camera requires a newer version of camera raw
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
If you have windows xp , vista or mac os x 10.6.8, then use the 8.3 dng converter
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube

Trying to upgrade Camera Raw- Elements file agent won't allow

While trying to upgrade Camera Raw, Elements 5.0 has an error message that says to turnoff Elements 5.0 File agent. I cannot find this anywhere. I use CS3 and Elements 5.0 but cannot upgrade to the new camera raw. Any one know how to shut off Photoshop Elements 5.0 file agent.exe ???
Thanks.

The file PhotoshopElementsFileAgent.exe is located in C:\Program
Files\Adobe\Photoshop Elements 5.0. It may be on the list of Windows XP
Services. Possibly also listed as Adobe Active File Monitor or Adobe Active
File Monitor V5. Set any and all of these services to 'Disabled'.
Additionally, it is a good idea to go to Elements Organizer preferences and
uncheck 'Automatically check for Services' and also uncheck 'Auto Launch
Adobe File Downloader on Device Connect'.
And, yes, ACR 4.3.1 should be manually installed. As a matter of fact, turn
off the automatic updater service, too (in >Help).
Juergen

Howto update Camera Raw in Photoshop CS6 on Windows Vista

Hi there,
i am trying to update the Camera Raw Plugin in Photoshop CS6 to the latest supported version 8.3 but i can not make it work...
What i want?
I want to view the RW2 Raw files from my Lumix GX7 in Photoshop CS6 and Bridge.
Lumix GX7 needs minimum Camera Raw 8.2 as of this site Camera Raw plug-in | Supported cameras
Camera Raw 8.3 is supported for CS6 as of this site Camera Raw-compatible Adobe applications
I found this link Keeping Photoshop Up-To-Date but there is only the latest version 8.6 available which does not support Windows Vista.
On this site Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.4 there is only the DNG Converter available.
Help Information in Photoshop shows Camera Raw 7.0 installed and now updated available (up to date).
The only other file i found was Camera Raw 8.5 here Camera Raw updates cannot be applied but does not help me either...
Has someone solved this problem before and could tell me how? Am i missing some hidden option to make the update work?
Greetings from Germany

You've tried Help>Updates from within photoshop cs6?
Or this 8.3 updater
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/setup.zip
If that doesn't work, you can install camera raw 8.3 by following the directions on the following page
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista

Unable to upgrade Camera Raw with CS4 in Lion...

Hi All,
very frustrating; I have been unable to upgrade Camera Raw despite several attempts.
I've downloaded the latest version as an upgrade; I've done Software upgrades through PhotoShop, but for some
reason these do not seem to have taken, ie., the version of ACR in Bridge preferences remains 5.0.
This makes it impossible for the computer (a brand new MacBook Pro) to read or convert to DNG raw files
from a Nikon D300S.
Oddly, ACR 5.0 converts raw files from a D700 just fine.
Also puzzling is that my attempt to upgrade to ACR 5.7 in a 5 month old iMac have been smooth as silk (OS 10.6.7)
Help!
Stu Rosner

At one point, I was one of the most vocal critics of camera raw in the CS4 / Lightroom v2 days. In short, I felt that there was not enough control over noise reduction and fine detail rendition when processing digital camera raw files, especially at higher ISOs, although I had been quite pleased with earlier versions. That all changed when CS5 / LR v3 was released. You now have an enormous amount of control over exactly how much sharpening and how much noise reduction will be applied to an image. The amount of fine detail one can extract from a low-ISO raw file is extraordinary. When you crank up the ISO and an image gets noisy, you now can choose whether or not you prefer a smoother look at the expense of some of the more subtle texture details, or a slightly grainier look where one has a feeling that no significant fine details are lost from the original capture (what I prefer). The raw processing defaults in Adobe's latest software are good starting points, but for my personal tastes, I generally do modify them a bit with less NR and slightly more sharpening at a smaller radius.
Even out-of-camera JPEG files will benefit from the new processing engine. I find that turning down the sharpening and NR in-camera, and then applying some subtle tweaking in LR, for example, makes for much better looking images even when starting from a JPEG. If you are a raw shooter, like I am, then upgrading to the latest Photoshop and Lightroom is absolutely 100% worthwhile in my opinion!
I personally feel that the quality of raw conversions in Adobe's latest software are pretty much the best there are. I have used many other raw converters (Capture One, Aperture, RAW Developer, Silky Pix, Canon's DPP etc.), and while each have their strengths, overall I far prefer the look of the final image from Adobe's latest software. Sure, I might find the colour rendition slightly better, in some cases, from some other raw converters, but colour I can fix. Poor detail rendition or heavy-handed/crude noise reduction I cannot.
EDIT: Also should mention how good the lens correction controls are. Not only are there automatic lens corrections available (possibly of limited use with an M8 due to potential lack of lens EXIF information), but the manual corrections are extremely useful. Chromatic aberration, vignetting, highlight fringing and distortion control all work extremely well and are minimally harmful to image quality, unlike performing those same corrections in Photoshop after the raw conversion stage. You also have excellent perspective corrections that, amazingly enough, seem to have very little impact on image quality even when fairly dramatic adjustments are made.
Lastly, I own both Noise Ninja and Topaz DeNoise and since upgrading to Adobe's latest software, I don't think I have felt the need to use either of those two third party NR plugins once. Purely from a noise reduction standpoint, upgrading to CS5 or LR v3 is almost like getting a new camera, almost like moving from a cropped sensor to a full-frame as far as high-ISO image quality.
I would suggest you download Lightroom v3 and give the 30 trial version a whirl. Spend some time in the Detail section of the Develop module and make sure that for each image you are looking at, ones that you may have edited in previous versions of Camera Raw or Lightroom, that you have "2010(Current)" chosen in the "Process:" section of the CameraCalibration tab in Develop. That will ensure that you are fully benefitting from the latest raw conversion engine. Zoom in to 100% before you tweak the Detail settings to make sure you are seeing actual pixel-level detail. I think you may be amazed at what you can do...
Regards,
Mike Mander

Problems upgrading camera raw 8.3 to 8.5, upgrade finished but version 8.3 still shows in Bridge

problems upgrading camera raw 8.3 to 8.5, upgrade finished but version 8.3 still shows in Bridge

Moving this discussion to the Adobe Camera RAW forum.

For new upgrade Camera Raw 8.4, I cant'nt use it with Bridge ...

Bonjour
Depuis la mise a jour Camera raw 8.4
je n'y ai plus accès dans bridge ; Je ne peut plus ouvrir directement Camera raw dans bridge par le clic droitet il ne prend plus en compte les mots clés et les corrections déjà faitesCordialement
Loïc

Thank you
Message du 17/04/14 10:56
De : "R_Kelly"
A : "Grignon Loic"
Copie à :
Objet : For new upgrade Camera Raw 8.4, I cant'nt use it with Bridge ...
Re: For new upgrade Camera Raw 8.4, I cant'nt use it with Bridge ...
created by R_Kelly in Bridge General Discussion - View the full discussion
Okay, now your in the right library.Use the plugin from this page to replace the existing one in your screenshot.
(don't forget to remove the plugin folder and plugin you created in your user library)http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.htmlThen you'll probably need to purge the Bridge CS6 cache.http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6306475-630487/450-209/Untitle d-1.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6306475#6306475
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6306475#6306475
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6306475#6306475. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Upgraded camera raw to 8.4 and now lightroom edit in ps pano super slow

Upgraded camera raw to 8.4 and now lightroom edit in ps pano super slow. Running cc versions of ps & lr

Camera raw not part of lightroom sentence difficult 2 understand

Upgrade Camera RAW in older PS ver.

Hello, just a quick question, can you upgrade Camera RAW with out upgrading PS or Bridge?
I have PS-CS3 running on a PC and I see there are some nice features in CR 6.3. Can this be done or do I need upgrade PS and Bridge - funds are low!
Thanks,
Captain 1854

Thanks Jeff, That's all I needed!
Captain------------

Update Camera Raw for PSE 8.0

Hi, what's the latest version of Camera Raw that can be used with PSE 8.0?

Thanks so much. I thought it might have been 6.2, but wanted to be sure. The list is very helpful, too.
SCB
Date: Thu, 2 Aug 2012 14:15:54 -0600
From: [email protected]
To: [email protected]
Subject: Update Camera Raw for PSE 8.0
Re: Update Camera Raw for PSE 8.0
created by R_Kelly in Photoshop Elements - View the full discussion
Camera raw 6.2 Here's a list: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applic ations.html If you need to open files from a newer camera you could use the 7.1 DNG Converter to convert the files to dng copies which will open in pse 8.

I cant upgrade camera raw and need to to be able to work with new camera files why?

i cant upgrade camera raw and need to to be able to work with new camera files why?

Boilerplate text from Best Practices FAQ
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    * Adobe product and version number
    * Operating system and version number
    * The full text of any error message(s)
    * What you were doing when the problem occurred
    * Screenshots of the problem
    * Computer hardware, such as CPU; GPU; amount of RAM; etc.

Camera Raw in PSE 6

I'd appreciate help. I have PSE 6 and was editing RAW files using Camera RAW just fine until I purchased a new desktop last week. I'm running VISTA now. I re-installed PSE 6 but when I try to load my RAW images, I get the message "no valid files found". I assume the RAW files are not being recognized. I assumed that when I re-installed the PSE 6 that Camera RAW would also be re-installed and I'd be "good to go". Not so. I've had the suggestion to simply to to the Adobe site and install the new 5.5 upgrade of ACR. Do I need to do this and, if so, how? And....it would seem that simply re-installing 6 would have done it and I'm not sure why....unless this is Adobe's way to encourage me to upgrade to PSE 8.
Thanks.

Thanks. I went to the Adobe site and spent a lot of time reading yesterday and it clearly stated that the 5.5. was the upgrade for PSE 6. One other question: am I right in assuming that Camera Raw is a normal part of Elements and, if so, would the latest upgrade be a part of PSe 8?
Randy Wolthuis, Ph.D.
Director, Broene Counseling Center
Licensed Psychologist
Calvin College
>>> Barbara Brundage <[email protected]> 10/20/2009 9:18 AM >>>
I don't think that PSE 6 for windows can run ACR 5.5, but it wouldn't hurt to try. What I would do is to get the 4.6 update, which you can download here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4044
Follow the instructions EXACTLY, including removing, not renaming, the existing version of the plug-in.

RAW converter, PSE 9 and Windows 8

I've just upgraded from Windows 7 to 8 and now find that when I try and open Canon CR2 files in the PSE 9 RAW converter, I get a message saying PSE can't open the file because it is "the wrong type of file". TIF and Jpeg files open without any problem, so it seems to be just the RAW converter that is the problem.
Also, when I download pictures from my camera into the Organiser, I am no longer given the option to select only certain images to be downloaded and given a particular folder. The only route that seems to be available is to download everything on the camera card.
Anybody got any ideas how to solve these two problems? All suggestions gratefully received.
Julian

Launch Full Edit and go to the menu:
Help >> About Plug-in >> Camera Raw
Check the installed version.
The last update for PSE9 was version 6.5
Have you changed your Canon model?

Upgrade Camera Raw in PSE 7 on a Windows 7 64bit

Similar Messages

Maybe you are looking for