Upgrade certificate 9i to 10g.

Hi All,
Today i upgrade my oracle 9i OCP certificate to Oracle 10g OCP.
after complete the 9i OCP, i register in the oracle site, after 45 days i got the certifiacte through courier. now i completed the 10g, kindly tell me how to register for the certificate.
Regards
Senthil Kumar

Hi,
>>Today i upgrade my oracle 9i OCP certificate to Oracle 10g OCP.
First of all congratulations !!
>>for upgrade exam also we have to submit the hands on form????
Candidates who are upgrading their existing Oracle DBA OCP credential from a previous version are no required to submit it. For more information take a look at [url http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=99#2]Who should submit the form? page. Therefore, you just need to wait for your certificate.
Cheers
Legatti

Similar Messages

Issues after upgrading the Obiee from 10g to 11g

Hi all,
We have recently upgraded our rpd from 10g to 11g. And a part of Webcatlog is being upgraded. We observe issues with the upgraded reports.
As the for the report prompts the script was taking lot of time. And the browser pop's a message either to 'stop' or 'continue'.
The report is taking lot of time to run than the usual 10g environment. And the path BP1 is also applied for the 11g environment.
Please suggest a troubleshoot method to overcome the issues with the upgraded reports.
Thank you,
Chris.

Check this pdf file
http://www.rittmanmead.com/files/biforum2012/ranka_performance.pdf
If helps pls mark

Report upgraded from 6i to 10g not displaying data.

Hi,
I upgraded one report from 6i to 10g,
When I'm running the report for the same set of data.
After changing the layout for few fields in the subframe.
first time it has shown the data in the report output but now same report with same data is not displying the output.
I'm sure this is due to some layout problem.(may be due to upgradation from 6i to 10g)
Please guide me to resolve this problem.

Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard

Steps to upgrade from 9i to 10g

How to upgrade from 9i to 10g?
i dont have any idea

Choose an Upgrade Method
http://download.oracle.com/docs/cd/B10501_01/server.920/a96530/migprep.htm#1006935
10g Upgrade Companion: Doc ID: Note:466181.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3420297705404971166::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,466181.1,1,1,1,helvetica
Adith

Steps to upgrade from 8i to 10g

i look for some documents about this topic 'steps to upgrade from 8i to 10g' but i couldn't find in the site...
would you mind tell me where can i find a complete document , or if you can tell me in details please.
thanks alot in advance

http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10763/toc.htm
Nicolas.

Issue in oracle upgrade from 9i to 10g.

Hi,
I have an MS access application running on oracle database.Recently database is upgraded from 9i to 10g.
After upgrade application is facing the conversion problem.it is throwing an error on varchar and time stamp field showing invalid timestamp message.NLS setting of both the version is same.Please suggest.

Thank you,
Here are the answers of your queries.
Yes,This is affecting only MS access application because no other application is accessing this database.
No,No other component of the application is changed or upgraded it is only database which is upgraded.
The error is ORA-06502:PL/SQL:numeric or value error:Character to number conversion error.(In the application the value of this field is defind as Double and in database table it is VarChar and the system was working fine untill database upgrade after upgrade it is giving above error.)
For another field it is giving the error "No valid timestamp" although the same was working fine before upgrade.
No I have not traced the actual sessions but from the backup of 9i I have checked NLS setting and compared it with 10g and found that both are the same.
Hope I have not confused you.

Upgrade oracle 9i to 10g in apps 11i

I am trying to run dbua from 10g oracle_home. However it gives the following db to upgrade->FATST:/u02/fatstdb/10g:N (this is non-existent oracle home)
But actually databse that i have to update is -->
FATST:/u02/fatstdb/9.2.0:N
We have the following entries in oratab file-->
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
*:/u02/fatstdb/9.2.0:N
*:/u01/fatstora/iAS:N
*:/u01/fatstora/8.0.6:N
FATST:/u02/fatstdb/10g:N
FATST:/u02/fatstdb/9.2.0:N
Actually sometime back we tried to upgrade to 10g which failed and then i did clone it from prod. I installed 10g software,companion products,10.20.4 patch set on new oracle_home-/u05/fatstdb/10g
I believe rest of inventory is clean as i always create a empty oraInventory directory before cloning.
DBUA also gives message, that if you do not see database that you want, make sure that the entry with database name exists in file /var/opt/oracle/oratab file.
I think i will have to edit the file oratab manually to remove the entry "FATST:/u02/fatstdb/10g:N" as the desired entry is already there. Is this okay?
Also i manually copied init<sid>.ora from 9ihome/dbs to 10ghome/dbs modifying the required parameters. i want to know is this manual step required?
Thanks

I did that and restarted the DBUA. It went on smoothly but during the Post-install steps, the putty connection was lost and hence GUI also got lost. when i see the PostUpgrade.log
It states this-->
DOC> 1. Query returning the number of invalid objects remaining. This
DOC> number should decrease with time.
DOC> SELECT COUNT(*) FROM obj$ WHERE status IN (4, 5, 6);
DOC>
DOC> 2. Query returning the number of objects compiled so far. This number
DOC> should increase with time.
DOC> SELECT COUNT(*) FROM UTL_RECOMP_COMPILED;
DOC>
DOC> This script automatically chooses serial or parallel recompilation
DOC> based on the number of CPUs available (parameter cpu_count) multiplied
DOC> by the number of threads per CPU (parameter parallel_threads_per_cpu).
DOC> On RAC, this number is added across all RAC nodes.
DOC>
DOC> UTL_RECOMP uses DBMS_SCHEDULER to create jobs for parallel
DOC> recompilation. Jobs are created without instance affinity so that they
DOC> can migrate across RAC nodes. Use the following queries to verify
DOC> whether UTL_RECOMP jobs are being created and run correctly:
DOC>
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
When i checked the number of invalids they have increased to 173 ..originally they were 73. That is fine , i can recompile them manually.
SELECT COMP_NAME, VERSION, STATUS FROM
DBA_REGISTRY
COMP_NAME VERSION STATUS
Oracle Database Cata 10.2.0.4.0 VALID
log Views
Oracle Database Pack 10.2.0.4.0 VALID
ages and Types
Oracle Real Applicat 10.2.0.4.0 INVALID
ion Clusters
JServer JAVA Virtual 10.2.0.4.0 VALID
Machine
COMP_NAME VERSION STATUS
Oracle XDK 10.2.0.4.0 VALID
Oracle Database Java 10.2.0.4.0 VALID
Packages
Oracle interMedia 10.2.0.4.0 VALID
Spatial 10.2.0.4.0 VALID
Oracle Text 10.2.0.4.0 VALID
OLAP Analytic Worksp 10.2.0.4.0 VALID
ace
COMP_NAME VERSION STATUS
Oracle OLAP API 10.2.0.4.0 VALID
OLAP Catalog 10.2.0.4.0 VALID
Oracle Data Mining 10.2.0.4.0 VALID
Oracle XML Database 10.2.0.4.0 VALID
Oracle Enterprise Ma 10.2.0.4.0 VALID
nager
15 rows selected.
I also managed to shutdown and startup the 10g db successfully.
I checked the database upgrade step and in that it is mentioned that utlrp.sql is the last step in manual database upgrade step .I want to know is there any other post upgrade step that needs to be done or can i just continue the steps from Doc ID: 362203.1 Oracle Applications Release 11i with Oracle 10g Release 2 (10.2.0)

Sorting issue after upgrade from 9i to 10g

Dear all,
It is found that the sorting behavior is different after upgrade from 9i to 10g.
In 9i, even if the SQL statement does not specify the ORDER BY clause, the sorting order is consistent for a particular SQL statement and most likely the sequence follows the searched key fields' order.
After upgrade to 10g, the query output could vary as long as the SQL statement does not specify the ORDER BY clause.
Is it due to the Reverse Docid Sorting issue? How can I troubleshoot this issue?
Thanks for your help,
M.T.

903714 wrote:
Dear all,
It is found that the sorting behavior is different after upgrade from 9i to 10g.
In 9i, even if the SQL statement does not specify the ORDER BY clause, the sorting order is consistent for a particular SQL statement and most likely the sequence follows the searched key fields' order.
After upgrade to 10g, the query output could vary as long as the SQL statement does not specify the ORDER BY clause.
Is it due to the Reverse Docid Sorting issue? How can I troubleshoot this issue?
Thanks for your help,
M.T. This is expected behavior in 10g. Oracle will not order the dataset for you unless and until you explicitly specify it.
So without using order by clause in 10g, oracle doesn't guarantee that rows will be ordered.
To go back to old behavior like 9i, you can set a workaround by
alter session set "_newsort_enabled"=false;
Also see MOS - Order Of Data Retrieval Differs after upgrading 9i To 10g [ID 456707.1]

Tag not being created after upgrade from 9i to 10g

We're upgrading from 9i to 10g - about time - and we've hit some "unexpected behaviour".
If I run
    SELECT xmlelement("TestMsg",
                    XMLFOREST(m.tx_id   "MsgNum",
                              m.tx_type "MsgTyp"
                              ) MESSAGE -- this is the alias for the XMLFOREST item
                    ) ut_xml
    FROM (select 1 tx_id, 'test' tx_type from dual) mon my 9.2.0.4 database I get
<TestMsg>
<MESSAGE>
    <MsgNum>1</MsgNum>
    <MsgTyp>test</MsgTyp>
</MESSAGE>
</TestMsg>- an extra tag is created based on the alias of the XMLFOREST item.
on my 10.2.0.4 database I get
<TestMsg>
<MsgNum>1</MsgNum>
<MsgTyp>test</MsgTyp>
</TestMsg>no MESSAGE tag.
Some of the XML parsing we have is taking account of this MESSAGE tag and hence is now breaking.
I guess my question is whether we've messed up the install of XMLDB or whether the 9i behaviour was incorrect and we should amend the parsing to the 10g behaviour.

Behavior change...?
SELECT xmlelement("TestMsg",
                    xmlelement("MESSAGE",
                    XMLFOREST(m.tx_id   "MsgNum",
                              m.tx_type "MsgTyp"
                    )) ut_xml
FROM (select 1 tx_id, 'test' tx_type from dual) m
will give output in 10.2.0.4.0 EE
UT_XML
<TestMsg>
   <MESSAGE>
      <MsgNum>1</MsgNum>
      <MsgTyp>test</MsgTyp>
   </MESSAGE>
</TestMsg>Edited by: Marco Gralike on Mar 29, 2011 1:07 PM

Database upgrade from 8i to 10g using exp/imp

Dear Friends,
Please provide the steps to upgrade from 8i to 10g using exp/imp.
Thanks,
Rathinavel

Hi;
Please also see cold backup option
How to migrate from 8i to 10g to new server using cold backup [ID 742108.1]
Also see:
Upgrading from 8i to 10g with import utility
http://searchoracle.techtarget.com/answer/Upgrading-from-8i-to-10g-with-import-utility
Regard
Helios

Upgrade from 8i to 10g

Can a direct upgrade from 8i to 10g is possible?
OR
Do we need to upgraded from 8i to 9i , before we upgrade to 10g?
If we can migrate from 8i to 10g , directly please suggest me the metalink note number.
Thanks
Naveen

Dear Naveenanand,
I Agree with Jaffy!,
You can direct upgrade only if the current version is 8.1.7 or up. If this is not your case, you will need Upgrade to an intermediate Oracle Database release before you can upgrade to the new Oracle Database 10g release.
Here is a example:
8.0.n -> 8.1.7.4 -> 10.2
8.1.n -> 8.1.7.4 -> 10.2
All information you will need, you can found in this link:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/preup.htm#i1007718
Best Regards,
Francisco Munoz Alvarez
www.oraclenz.com

Upgrading Forms v5 to 10g web forms

Hi,
Can you upgrade directly to forms 10g from forms v5 (client server) or do you have to go to forms 6 first?
Can anybody summaries the upgrade path from v5
Thanks in anticipation
SD

Arun is correct. Specifically to your question, see [Chapter 16 Upgrading from Pre-Forms 6i Applications to Oracle Forms |http://download.oracle.com/docs/cd/B25016_02/doc/dl/web/B15572_01/plsqlconv.htm#i1007147].
Craig...

Does anyone upgrade from 9iAS to 10g?

Dear all,
Does anyone upgrade from 9iAS to 10g only? The EBS version (11.5.8) and the oracle database version (9.2.0.4) are still same.
Best Regards,
Amy

You can upgrade 9i database to 10g in Ebusiness suite using metalink note
Note:362203.1 Oracle E-Business Suite Release 11i with Oracle Database 10g Release 2 (10.2.0)
Note:369693.1 Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2
But for the application server components you can follow
Note:125767.1 Upgrading Developer 6i with Oracle Applications 11i
But Application server itself should be upgraded from 9iAS to 10gAS if you are planning to move your oracle applications Ebusiness suite to release 12.
Check the following metalink note
Note:403339.1 Upgrade R11i to R12
Sami Malik

Upgrading Rulebased applications to 10g database.

Hi
It may sound silly for you. I just wanted to know what happens upgrading my pl/sql code which is on Oracle 8i versions using Rule based optimizer to 10g database without channging it to CBO. What would be the worst thing it can happen, assuming that all fuctional features are supported in 10g that were in the code? Application doesn't work at all? Will perform very slow, in case how much slow?
Can someone give quatifiable value?
That would great.

Since the CBO is different in every release of Oracle, you're probably best off upgrading the database to 10g, gathering appropriate statistics on all the objects, and then testing to see which, if any, queries now take too long to run. Most of the time, you'll be able to fix those problems by adjusting the statistics that you gather. Otherwise, you may have to rewrite the query.
Justin

Upgrading from 9i to 10g on OS X?

Has anybody successfully upgraded from 9i to 10g on OS X?
I am stuck with Mac OS X 10.2.6 Jaguar for the next several weeks until I can upgrade to 10.3.4 Panther. According to the Oracle 10g on OS/X Oracle Installation Errata Information and Tools ( see http://www.crispdata.com/oracle_osx/ ), 10.3.4 is required for 10g installation.
In the meantime, I would prefer to experiment with 9i to learn more about Oracle database technology, and then upgrade to 10g after upgrading the OS to 10.3.4.
Has anybody already done this? Is this feasible?
-- Benjamin L. Russell
[email protected] (previously OTN Member, Since: Jul, 2000--just created new OTN account because of change in e-mail address)

Would it be sufficient to just set the passwords to expired? In this case generated the needed statements on your source DB and apply them on your destination DB, i.e.
select 'alter user ' || username || ' password expire;' from dba_users where account_status like 'EXPIRED%';
You might also consider other status values. Possible values are
OPEN
EXPIRED
EXPIRED(GRACE)
LOCKED(TIMED)
LOCKED
EXPIRED & LOCKED(TIMED)
EXPIRED(GRACE) & LOCKED(TIMED)
EXPIRED & LOCKED
EXPIRED(GRACE) & LOCKED
e.g.
select 'alter user ' || username || ' account lock;' from dba_users where account_status like '%LOCK%';

Upgrade certificate 9i to 10g.

Similar Messages

Maybe you are looking for