Upgrade CFM from Sap R/3 Enterprise (4.7) Sap to ECC 6.00

Hello,
We are in a project of upgrade Sap from Sap R/3 Enterprise (4.7) to Sap ECC 6.00. Our question is particularly for CFM component migration/upgrade.
As we checked we have activate the extension set:
EA-FIN: Financials Extension
EA-FS: Financial Services
According with the Component Version Data the extension set EA-FINSERV has the release 2.00. However, in order to execute the CFM migration with transaction TPM_MIGRATION we are not sure if our CFM installation is on release 1.00 or 2.00.
In the other OSS note 858966 mentions the following conditions to start points migration:
1. The start release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 1.10 or earlier.
2. The target release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 2.00 or higher.
Do you know a transaction o report Sap which provides this information?
Thank in advance.
Sergio

Within SAP, select System -> Status...  In the pop-up box, click the details button in the SAP System data section and you'll get another pop-up with system component information.  It's been a couple of years since I did the Treasury migration for our upgrade from 4.7 to 6.0, but I believe the component you're looking for is EA-FIN.  The Release column will have either 110 (for extension set 1.10) or 200 for (2.00).
Regards,
Shannon

Similar Messages

  • Installation of SAP R/3 Enterprise 4.70 & SAP BW 3.5 in Windows 2003

    Hi Everyone,
    I want to know, can i Install SAP R/3 4.70 & SAP BW 3.5 with Windows 2003 Enterprise Server. I know it's available on service.sap.com but is there anywhere else i can find the documentation on installation, pls give me a link where i can find the information.
    Thanks Everyone.
    Meghna

    Hi dear,
    www.service.sap.com/instguides !
    Hope it helps!
    Bye,
    Roberto
    (and please don't forget to reward the answer, when helpful...it's THE way to say thanks here...)

  • Migration SAP R/3 Enterprise 47x200 from HPUX to Windows.

    Hello,
    Due to cost-reducing we have to migrate our SAP environment (SAP R/3 Enterprise 47x200 - Oracle 9.2.0.6.0) from HPUX 11 to Windows. For the moment it's a production system, but it will become a sleeping system that needs to be active for legal reasons. Is it still possible to get the required installation CD's for this SAP version ? If yes, who do I have to contact, if not, do you have other suggestions to do this migration. Thanks in advance for your help.
    Regards
    René Jongeneelen

    >  Is it still possible to get the required installation CD's for this SAP version ?
    sure.
    >  If yes, who do I have to contact, if not, do you have other suggestions to do this migration.
    Download them:
    http://service.sap.com/swdc
    but
    keep in mind that you're doing a heterogeneous migration. This requires a certified migration consultant doing the migration on-site, otherwise you'll loose support for problems during the migration and for the target system.
    Check http://service.sap.com/osdbmigration --> FAQ
    Also keep in mind that Oracle 9.2 is (long) out of support, you should upgrade to 10g.
    Markus

  • Migration from Crystal Enterprise 10 to SAP Crystal Server 2011

    Hi all,
    We are currently using Crystal Enterprise 10 to schedule and view our reports and the designer is Crystal Reports 10 .
    we are planning to migrate to SAP Crystal Server 2011 with Crystal Reports 2011 as the designer.Can we do this migration directly or do we need to do the migration to an intermediate version before going to SAP Crystal Server 2011.
    Regards,
    Sreekanth S S

    1. So in this case, I need to migrate from Crystal Enterprise 10 to Crystal Reports Server XI R2/Crystal Reports Server 2008 or more using import wizard Then I will need to migrate from Crystal Reports Server XI R2/Crystal Reports Server 2008 to SAP Crystal Server 2011 using Upgrade Manager tool. Is my inference correct?
    That is correct. For XI R2, it would be XI R2 SP2 minimum. And you need to have a live installation of XI R2 SP2 as SAP does not have it in archieve download area.
    2.What is the potential risk if we try to migrate from Crystal Enterprise 10 to SAP Crystal Server 2011 using upgrade manager tool?
    I am not sure if that will work with success, If the reports migrated from CE10 do not work in CRS2011, it would be unsupported. You can however try it anyways.
    3.Can we open the reports developed using Crystal Reports 10 designer in Crystal Reports 2011 designer? .This is for another requirement of us where we have to just migrate the reports alone .
    Yes you can do that. Try opening and running them in CR2011, they should work but some of them can also result in some errors here and their, this is more specific to report design and what kind of grouping\ filtering\formulas you use.

  • Upgrading from 4.6C to Enterprise 4.70

    Looking for high level documentation / presentation with regard to functionality / pitfalls when upgrading from 4.6C to Enterprise 4.7 which can be used to demonstrate to my client.

    Hi Terence,
    Pl check this <a href="https://websmp201.sap-ag.de/upgrade">OSS Link</a>
    <a href="http://www.thespot4sap.com/upgrade_guide_v2.pdf">Upgrade Guide</a>
    Regards,
    Suresh Datti
    P.S. PL reward points if the answer is helpful

  • Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?

    Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?
    For those who have done this,
    1.  What quirks did you find that you had to overcome in your installation (I know that everyone's environment is different and produces differest results)?
    2.  What part of your code broke for which you had to find fixes?
    Tips and suggestions for a smooth installation, besides following the installation document.
    Thanks!

    Create a car (archive file) in CF 9 enterprise which will capture all CF 9 settings like Data sources, Web services etc. Make sure when you are doing this, pop up blocker is disabled.
    NOTE : While creating the archive file, give the full name with the absolute path in the package name. For example C:\Test\mypackage.car
    Then move this car file into the server where you want to install CF 11. Install CF 11 and then  deploy this archive (car) file. All CF 9 settings will be migrated to CF 11 enterprise.
    Else, if you want to install CF 11 on the same server where CF 11 is installed, then remove the connector for all the websites which are configured with CF 9, make sure the CF 9 services are running and then run the CF 11 installer and at the end of CF 11 installation, you will get a dialogue box which will ask you to migrate CF 9 settings in CF 11.
    Run the Code Analyzer in CF 11 Administrator to check whether any the CF 9 code used in your application is breaking in CF 11 or not
    HTH
    VJ

  • Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0

    Dear SAP,
    We are on the process of upgrading SAP R/3 Enterprise 4.7 with Ext:110 to SAP ECC 5.0.But during the VERSCHK_INI phase an error is been thrown showing that
    "The start release configuration :
    SAP_ABA  :620
    SAP_APPL :470
    SAP_BASIS :620
    SAP_HR:470.....is not supported "
    At this stage we decided to continue with this by ignoring the VERSCHK_INI phase,but it gave us a warning that to continue with the next phase(TOOLVERSIOn_INI phase) we require a password.
    we searched in several documents even in the documents along with the cd but was not able to find a password for this or a solution for the error in phase VERSCHK_INI.
    I request team SAP to help us in this regard.Expecting your reply ASAP.
    Thanks and  Regards
    Anantha Raman E.

    Were you able to find a resolution to this problem. We are also having a similar problem in our prepare phase and cannot find anything to help us as yet.
    Thanks,
    Barry Keating

  • Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

    Hi All,
    My client is upgrading from SAP R/3 4.6C to ECC 6.0
    We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
    we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
    The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
    Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
    If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
    Thank You,
    Ashok

    My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns.  ELM (External List Management), IDOC are some of the tools.
    You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
    We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system.  It also comes with batch tools to cleanse/dedup the entire systems name/address information.  See Data Quality Management for SAP for further details.

  • Upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5

    Hi
    We are doing upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5, can you please help in below points
    1. How much time does it take to run SP5 upgrade service pack for servers and client tools. The server need to be upgraded only on weekend, is it possible to upgrade in 1.5 days?
    2. The OS is Windows 2008 server. what should be the rollback plan in case of upgrade failure ? One of server uses VM image while Production server doesnt have any VM image.
    3. If BO client tools are on SP3, can they still connect to BO server components on SP5 - (for interim period when servers are upgraded first)
    Thanks
    anu

    Hi Anu,
    1. The upgarde should be completed in 1.5 days for the server and client componenets depending upon the number of servers you have in the cluster . If you are planning for upgarde do it successfully first on TEST , DEV and then proceed with PROD servers
    2. The roll back plan includes thebackup of the CMS database , the filestore directory and the complete installation folder . In case of any issue , you can the place the backup . If the servers are on the VM , it is always recommeded to have the snapshot of the images before the upgrade
    3. Yes, they can connect to the SP3 servers , but always recommeded to upgarde and have servers and client tools on same patch .
    Thanks,
    Sneha

  • Upgrading from P3e to P6 enterprise using existing licences.

    HELP !Please provide assistance especially from Primavera oracle agent to upgrade ourusing existing licences from P3e to P6 enterprise.

    I can't say for certain. I can only tell you what I did.
    Based on my understanding of how iMovie works, the Project file contains paths to the Event video clips in your iMovie Events, paths to the video clips in iPhoto (or Aperture), paths to music, paths to photos in iPhoto or Aperture.
    One of these that can be automatically updated is to move Events to another drive within iMovie.
    Another "automatic" update is to move the default iPhoto library to a different disk, but with the same name. That should still work.
    However, iMovie will not make the leap from iPhoto to Aperture for either stills or videos, as far as I know.
    When I switched to Aperture recently, I brought in my iPhoto photos as referenced, and left the videos in place.
    Alternatively, you could bring in your iPhoto photos to Aperture Library (not referenced) but leave the iPhoto Library intact somewhere. You could delete images or clips if you were absolutely sure they were not referenced in iMovie.
    I am enjoying Aperture, but it is difficult to make a clean break.

  • Question regarding Upgrading from Standard Edition to Enterprise Edition

    DB version:10gR2
    We want to upgrade from Standard Edition to Enterprise Edition.
    In the following documention
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#BABFBJCC
    It talks about
    Deinstall the Standard Edition server software.I don't understand what they mean by DeInstall the software.
    Question 1.
    By 'DeInstall' , they mean , use DeInstall Products in the Welcome screen of Oracle Universal Installer and Remove the chosen OUI Home.Right?
    Question 2.
    If i 'Deinstall' (ie. remove the software), all the binaries are lost. Right? So what is the point of having just the data files?
    Edited by: Citizen_2 on Apr 8, 2009 1:59 AM

    Citizen_2 wrote:
    DB version:10gR2
    Question 1.
    By 'DeInstall' , they mean , use DeInstall Products in the Welcome screen of Oracle Universal Installer and Remove the chosen OUI Home.Right?Yes, that means use OUI and deinstall the Standard Edition
    Question 2.
    If i 'Deinstall' (ie. remove the software), all the binaries are lost. Right? So what is the point of having just the data files?Because next point says install Enterprise Edition. For first get rid of old one and then install the needed one. There is no such option as upgrade in this case.

  • Upgrade from SAP R/3 4.7 to SAP ECC 6.0 with PSCD and TFA

    Hello!
    I have to upgrade an SAP R/3 4.7 to SAP ECC 6.0.
    We have SAP FI/CO, PSM, IM, FI-AA, PS, with PSCD (FI-CA) as well the special taxes component TFA.
    Is there some special procedures for the the Upgrade with this components (PSCD and TFA)?
    Is there some documentation for the special Uograde procedure as well the normal procedure?
    We use Windows with Oracle.
    Can some one

    PSCD is in ERP a Business function set - see 957295 - PSCD: Renaming PUBLIC_SERVICES business function set, the upgrade should automatically take care that activation.
    Is TFA the tax extension for Ireland? If yes, then the same should be true here.
    Markus

  • Graphs from xMII to SAP R/3 Enterprise 4.7

    Hi Experts, 
    We are having an requirement to display a graph from xMII to SAP R/3.
    The graph is based on the data collected from the historians.
    Is it possible to display the graph in SAP R/3 through some RFC ?
    Else, Can we pass on all the data from xMII to a z-table in SAP R/3 and generate graphs ?
    Please let me know your suggestions.
    Regards,
    Vivek K

    There is a GUI control for displaying web pages within SAPGUI. Sorry, I can't recall the object

  • Upgrading from SAP R/3 4.6D to SAP ECC 6.  Config. To be taken

    Hi All,
       We are configuring for Depot Sale for our Client in Sap 4.6D. As they are updating from SAP R/3 4.6D to SAP ECC 6.00. I like to know what the things to be taken care are.
    While configuring for Depot Sale in Sap 4.6D. We have updated the patches & OSS Notes. We need to transport that also.
    Please let us know at the earliest.
    Thanks in Advance,
    Sapuser

    Hi,
           Insted of doing in 4.6D do it in 6.
    RV

  • SAP R/3 ENTERPRISE 4.7 / ORACLE 9i / kernel 640 for AIX 6.1

    Hello,
    We plan to migrate our SAP systems from AIX 5.3 to AIX 6.1.
    We are currently running a SAP R/3 ENTERPRISE 4.7 on ORACLE 9i with a 640 kernel 64 bits UC.
    I would like to know if AIX 6.1 is validated for our system (SAP 4.7, ORCALE 9i and kernel 640).
    Thanks.

    I would like to know if AIX 6.1 is validated for our system (SAP 4.7, ORCALE 9i and kernel 640).
    Read
    Note 1137862 - Using SAP systems with AIX 6.1
    Note 1087498 - Support für AIX 6.1
    The first note will tell you the necessary TL/SP you need to install. The second note tells you about the minimum kernel version.
    What does not work is Oracle 9.2 --> not supported under AIX 6.1 (http://service.sap.com/pam or Oracle Metalink 169706.1).
    Since Oracle 9.2 is out of support already I highly suggest upgrading to Oracle 10.2.0.4 and using the latest 640_EX2 kernel.
    Markus

Maybe you are looking for

  • How can I copy a iPhoto album onto a flashdrive along with the photo information?

    How can i copy an iPhoto album to a flashdrive along with photo information, in order to send it to a friend please?

  • Display Black out

    My BRAND NEW MacBook´s display went completly dark... after 1 week´s use. There is a hint of light on the right top corner but that is all. WHATS GOING ON? Has this happened to anybody else? I´m very dissapointed in this computer.

  • Resetting column sequence in SQL

    Hi All, I have a simple requirement but I cant think of the solution... to simplify the problem, I have a master field and its child field, I need another column to bring back a sequence starting from 1...n and resetting itself back to 1 when a new m

  • Where are Validation settings stored?

    I'd like to be able to export/import settings for validation -- I've created custom validation information for HTML elements such as video, audio and canvas. I can't find anything in the userdata or Common Files directories, or in the registry.

  • Smart View - Excel Formulas

    Hello - New to the system, but wanted to know if there's a way to keep Excel formulas after refreshing in SmartView. Appears as though we lose the formulas after clicking the refresh icon. Thanks in advance