Upgrade Cisco Prime Infrastructure 2.1.1 to 2.2

Hi,
I would like to know how to
1. Upgrade Cisco Prime Infrastucture 2.1.1 to 2.2 procedure
2. How to backup existing config and data
Thanks in advance
- nazir

Hi Nazir,
Refer the below link for the upgrade from the exiting version ::
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#pgfId-113783
Follow the same steps :
Step :Backup on 2.1
Step 2: Restore 2.2
Backup and Restore::
Backup command::
PIServer/admin# backup MyBackupFileName repository MyRepo application NCS
Check the below link for
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/administrator/guide/PIAdminBook/backup_restore.html#pgfId-1080733
Step ::
Once Backup is completed , you need to Restore the backup to the Newly Buid PI 2.2 server::
Restore command:
PIServer/admin# restore filename repository repositoryName application NCS
Check the below link:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/administrator/guide/PIAdminBook/backup_restore.html#99810
Thanks-
Afroz
***Ratings Encourages Contributors ****

Similar Messages

Upgrade NCS 1.1.1.24 to Cisco Prime Infrastructure 1.2

Having a problem installing the ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz patch file on a virtual NCS before upgrading it to Cisco Prime Infrastructure 1.2.
I've followed the Cisco Prime Infrastructure 1.2 Quick Start Guide and did not had the same success as described in the document (see below):
gmsncs/admin# dir disk:defaultRepo/
Directory of disk:defaultRepo/
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 1544204288 bytes total used
                27185573888 bytes free
                30293413888 bytes available
gmsncs/admin# patch install disk:defaultRepo/ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Local file not found
Anybody experience with this procedure.
Thank You
--- Update ---
Skipped Step 4 and followed Step 5 in the Quick Start Quide, however now I receive a diffrent error:
gmsncs/admin# dir disk:/defaultRepo
Directory of disk:/defaultRepo
926193986 Sep 26 2012 17:48:12 GRDbackup-120926-1736.tar.gpg
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 2471309312 bytes total used
                26258468864 bytes free
                30293413888 bytes available
gmncs/admin# patch install GRDbackup-120926-1736.tar.gpg defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
gmsncs/admin#

Hi, Thank you again for your help, but I am still stuck. I have gathered the outputs from ncs start and a ncs status afterwards. Currently I am not able to access the web-UI of NCS..
deberncs01/admin# ncs startStarting Network Control System...This may take a few minutes...Dependency Check Failed: Matlab is not running.Dependency Check Failed: Ftp is not running.Dependency Check Failed: Tftp is not running.Failure during Network Control System startup. Check launchout.log for details.startdeberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin# ncs statHealth Monitor is running, with an error.failed to start NCS on startup Health MonitorReporting Server is StartingFtp Server is FailureDatabase server is stoppedTftp Server is runningMatlab Server is runningNMS Server is stopped.SAM Daemon is not running ...DA Daemon is not running ...Syslog Daemon is not running ...statusdeberncs01/admin#
Anyone got a clue on that? and where can I find that launchout.log on NCS? Thank you

Upgrade from Cisco Prime infrastructure verion 2.0 to 2.1

Request you all to please let me know if i have to install point patch before upgrading the cisco prime infrastructure 2.0 to 2.1.

After moving to 2.1, there is a 2.1.1 point patch currently available.
You should install that and the latest device package (4.0 as of this posting).
As always, the Release Notes are the best place to check the current available updates.

WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
Jelena

Hello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl           restoreDBTableMig.pl restoreJRMMig.pl      restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
     USER ID is ..................................... : sysadmin
     OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
     Generation to be restored is ................... : 0
     Backup taken from............................... : /opt/BKP/
     Common Services version in the backup data is... : 3.3.1
     Common Services is installed in................. : /opt/CSCOpx
     The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
     Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
     Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
     WARNING: The list of applications installed on this CiscoWorks server does not match the list of
              applications in the backup archive. If you restore data from this backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
     Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
     Available disk space in NMSROOT................. : 86451488 Kb
     Required disk space in NMSROOT.................. : 35906524 Kb
     (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
          Cross Platform Update started.
          Cross Platform Update completed.
          License check started.
             WARNING: The license details in the server are different from the backup data.
                      After restoring, please check the license available in the server.
             WARNING: Your current license count is lower than your earlier license count.
                      If you restore the data now, devices that exceed the current licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
Restoring DCNM CrossLaunch data.
          Restored DCNM CrossLaunch function.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
          Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
        10% of IPM Restore Completed
        30% of IPM Restore Completed
        50% of IPM Restore Completed
        60% of IPM Restore Completed
        70% of IPM Restore Completed
        100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena

LMS 4.1 (Windows) & NCS 1.1 (VM) Upgrade to Cisco Prime Infrastructure 1.2

Hi All,
Im getting a bit confused about the whole upgrade migration process for the following config to Cisco Prime Infrastructure:
LMS - Version 4.1 , 500 devices. Windows Server 2008 R2 Standard SP1
NCS – version 1.1 , 50 devices Red Hat Linux ( 64 Bit) (Installation software - NCS-VA-1.0.1.4-small.ova)
I want to be able to backup databases and migrate licensing from LMS and NCS to one platform. Does anyone have experience of this and could possible guide me thorugh this process. LMS has SAS and NCS has SAU.
Help will be very much appreciated!!

It's a couple of steps but can be done. You may want to reconsider getting off of LMS since the latest Prime Infrastructure (PI 1.2) does not have full feature compatibility with the latest LMS (4.2.3). Have a look here for the comparison.
If you still want to do it:
1. Upgrade your NCS to PI 1.2 (instructions). If you're going with a total of 550 devices on a combined license you should use the medium ova file to get the correct server resource allocation. You will need to get the new license from the TAC or via the licensing portal. I'm not sure if you can get the PI license for your LMS upgrade directly via the portal but you do have the entitlement for LMS 4.2 and PI 1.2 (combined licenses not to exceed the original LMS number) if your SAS is current. You may need to contact the TAC and ask for the licensing team.
2. Upgrade your LMS to 4.2 and patch it to 4.2.2 (instructions). Once you've done that, there is a simple menu command to export your device credentials to Prime (Admin, System, Export Data to PI in LMS and then Operation, Device Work Center, Bulk Import in PI - instruction on Page 18 here). Do that and then in the new PI installation import the devices.
Verify everything is working and you can decommission the LMS server.

Upgrading from LMS 4.1 to Cisco Prime Infrastructure

Looking for some information and confirmation on the upgrade process.
Currently we are running LMS 4.1 with a valid SAS Service Contract which will allow me to upgrade to Prime Infrastructure 1.1 or Prime Infrastructure 1.2 using the upgrade tool at no charge. After using the tool I am given access to download PI1.1 or PI1.2, however, it only actually let me download PI1.1 but said i do not have the proper permissions to download the 1.2 license. I also noticed that the software images for 1.2 are not available ont he ciso download page.
I am wondering what the latest version of Prime Infrastructure I will be able to upgrade to without an additional purchase. Can I upgrade up to all the way up to 1.4 or can I only go up to 1.2 (but then where is the download for the software).
If i can upgrade to 1.4 then what path should I take? 1.1 to 1.3 to 1.4? Just skip 1.2 since the download is not available and it will not let me download the license file?
Thank you for your help

LMS 4.x to Prime 1.x would not be considered a functional or recommended "upgrade" for most intents as you would lose several major capabilities (Topology, Ciscoview, many reports, compliance templates, etc.). Your best path right now would be to move your LMS along to the current version - 4.2.4. The release notes explain the upgrade path for that.
Licensing and upgrade eligibility-wise you need SASU for PI (not plain SAS for LMS) for major upgrades (i.e to go to 2.0). An LMS SAS contract entitles you to migrate to PI 1.2 which in effect means 1.3 although Cisco had some issues with updating the ordering system so there was not actually a SKU for PI 1.3 sold - only the 1.2 version which, when combined with your LMS SAS service contract, entitles you to move to PI 1.3 (or 1.4 but that's not generally recommended). More details are in the Prime Ordering and Licensing Guides here.
Personally, I recommend customers with existing LMS 4.x installations wait until PI 2.1 comes out to consider the upgrade. 2.0 still misses several tools present in LMS 4.x.
If you really want to move over to PI, you can export the data from LMS 4.2.4 and import into PI 1.3 (or 2.0).

Upgradding Prime Infrastructure version 1.2 and LMS 4.x to Cisco Prime Infrastructure 2.0

Hello,
A customer currently have 2,500 Cisco Prime Infrastructure Lifecycle device license using Prime Infrastructure version 1.2 and LMS 4.x. the customer wants to upgrade to Cisco Prime Infrastructure 2.0.
Does anyone know if it is possible to upgrade to version 2.0 without additional cost? the licenses from
Cisco Prime Infrastructure 1.2 has to be upgraded or we need only to rehost the VUDI.
Also could be possible to upgrade LMS 4.x to Cisco Prime Infrastructure 2.0?
thanks!

The two features you mention are two big missing ones. Another is full syslog capability. I don't believe CiscoView or day one support via package updates is included either.
Another is less tangible - the depth of experience and documentation available for LMS vs. Prime Infrastructure (particularly the wired management features). I agree for wireless PI 2.0 looks good. Some new features are coming for wired that look promising but they are new as of PI 2.0 so I'm taking a wait and see on them.
I hope to get 2.0 up in my lab in the next week or so and will hope to be pleasantly surprised but that's seldom the case with a major new release.

When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

We are running Prime Infrastructure 1.3 primarily for wireless management at this point. We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out. While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features. For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers. I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment. Does anyone know when it's officially being released? Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are? I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management. Any useful information or links would be appreciated.
Thanks,
Christian

PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
For what does it have for customers?
> As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
-Thanks

Cisco Prime Infrastructure 2.0 and Cisco ASA

Hello,
We've recently installed trial version of Cisco Prime Infrastructure 2.0 Express. We hoped that it already supports Cisco ASA 55xx series (especially 5505, we have pretty amount of them). But we had some problems with PI and asa durind the exploitation process.
First, I've added ASA to PI, and Inventory Collection Status is Completed, but I can't see CPU and RAM utilization graphs. Inventory.logs are non-informative.
Also, config backup is success, but when I try to watch the backuped configuration at Configuration Archive PI says "Failed to fetch raw configuration". And so on.
ASA version is 5505, image is 9.1(2).
So, I have a question: is it possible to manage ASAs with PI 2.0?
UPD: I've just tried to upgrade asa to 9.1(4), and behavior of the equipment is quite the same. Seems we shall wait for 9.2 to be released.

Have you downloaded and applied the latest Device Pack updates?
PI enhanced ASA support after the initial 2.0 release and the Device Packs incorporate that change.
The README file for Device Packs explains how to install them. (A bug currently does not allow the direct download in PI so you need to follow the method for installation from local storage after you manually download. Here is a link to the download location.

Ciscoworks LMS 3.0 to Cisco Prime Infrastructure LMS 4.2

In order to complete the upgrade the LMS 3.x runs over a physical server that ends with the upgrade(server its gona be retired), the think is that the Cisco Prime comes with an UCS and its gona run over a VM. The question here is the "Cisco Prime Infrastructure 1.1 - Maj Upg from LMS 2.x/3.x" media could be runs as clean install, I mean with no LMS 3.x intalled before? an the "Prime Infrastructure LMS 4.2 - 1.5K Device Maj Upg Lic" could be registered with no license installed of LMS 3.x?

There are a couple of things to distinguish:
1. The product SKU you need to order to migrate from LMS 3 to LMS 4.2.
2. The license file that is installed on that new LMS server.
#1 is based on Cisco agreeing, usually through the partner or reseller you are working with, that you are entitled to order the upgrade SKU (vs. buy a complete new product). The upgrade SKUs are all listed in the ordering guide here.
L-PI12-1.5K-UP (note - NOT the 1.1 product description you noted in the original post) would be the SKU for a major upgrade from LMS 2.x/3.x to the current Prime Infrastructure 1.2 release at the 1500 device license level. That upgrade includes licenses for both PI 1.2 and Prime LMS 4.2. You may choose which to install - most LMS customers stick with LMS for now as PI 1.2 does not yet have full feature parity. Your managed devices should not exceed 1500 combined (in this case) but that combined number is not enforced technically by the product's license daemon.
Once you have purchased the product and have the media you can install it on any host that meets the installation prerequisites as far as OS, memory, disk etc. A clean installation of LMS does not check for or require a previous installation as far as technical checks.
#2 - Once you have installed the new LMS server (and optionally a step near the end of installation, you need to add in the license file (*.lic file). That is obtained through the Cisco licensing portal (or via the TAC if you prefer) using the Product Activation Key (PAK) received with your product.

Cisco Prime Infrastructure 1.2 and Aironet 1250 + VSS issues

Hi,
I am new to the NCS implementations and configurations. I have one very specific case with Cisco Prime Infrastructure 1.2 and autonomnous APs and several issues with Cisco VSS on 6500 switches.
So here is the version from Prime:
NCS/admin# show version
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.1.038
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: NCS
Version information of installed applications
Cisco Prime Network Control System
Version : 1.2.1.012
IOS version on our APs (which are autonomnous) is:
AP-N-1>show ver
Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 11-Aug-11 03:23 by prod_rel_team
Well the issue what we have now is that access point has been added but its not recognized by the NCS prime. I have tried all three versions of SNMP but I get the same result. The SNMP configuration is valid since I use the same for my switching infrastructure. When I enter "debug snmp packets" and "terminal monitor" I can see the SNMP communication between Prime and Aironet 1250 which is standalone.
When I switch to Lifecycle theme and go to Operate > Device Monitor Center I see all devices I have added. The Aironet 1250 is reachable but under collection status I get Managed with Warnings. When I hover over with my mouse I get "None available".
I have successfully added my switching infrastructure in total, which is operating perfectly for Catalyst 2960/3650/3750/4500 series but for 6500 under VSS I have some warnings. The device is recognized by the system which is excellent and all is operational. I get the following errors under Collection Status:
feature_sensor
SNMP request timed out
feature_powerSupplyFanStatus-6k
SNMP request timed out
IdentityCapability
The device is unreachable.
feature_flashdevice
SNMP request timed out
sam_ipsla_feature
The device is unreachable.
What can be done to resolve these issues ? I have attached a screenshot of this particular issue. The affected access point is 172.16.165.241.
Predrag Petrovic

Hi rajeeshp,
Currently I am not allowed to upgrade it because of internal procedures involved in upgrading a specific piece of software (obtaining permissions from various departments). Is it free to upgrade from 1.2 to 1.3 or there is a specific charge for that.
Predrag Petrovic

Cisco Prime Infrastructure 1.3 to 2.1

I have a Cisco Prime Infrastructure version 1.3 virtual appliance and we have a new Prime Infrastructure version 2.1 virtual appliance set up. I would like to get the wireless information put into the new server. This includes the WLC and APs and then the campus maps and the location of each AP on the map Im not sure if the heat mapping is a feature of Prime or if I have to set that up too. But I would like the heat maps.
What would be the easiest way todo this?

Are you logged in with a cisco.com (CCO ) userid? I just checked it and it works fine for me.
You can navigate down to it via:
HOME
SUPPORT
PRODUCT SUPPORT
CLOUD AND SYSTEMS MANAGEMENT
CISCO PRIME INFRASTRUCTURE
INSTALL AND UPGRADE
INSTALL AND UPGRADE GUIDESCisco Prime Infrastructure 2.1 Quick Start Guide

Cisco Prime Infrastructure 1.x Server requirements & Operating System

Dear Friends
I wish you are in very good health ........ I really very confused regarding LMS and i really needs your help ........ I need to order LMS for one of our customer with 500 devices and reporting cabailities ..... So i chosse base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and
Compliance Management - 500 Device License "L-PI-1.1-CM-500"
What really confused me that i tried to search server cabalitity for my requirments & Operating system and couldn't find it ...... what i need your help for is the following:
1) What is the server requirments ???
2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
3) Is their any deticated applicance from Cisco ??
Please help
Thanks in advance

In addition to the release notes for the 4.2.3 patch noted above, please also see the 4.2 release notes which further direct you:
Server and Client Requirements
For information on server and client requirements for the system and browser, see Chapter 2 of Installing and Migrating to Cisco Prime LAN Management Solution 4.2 at:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/
install.html
To summarize the options it describes, you can run the LMS product on any number of platforms - a dedicated Cisco hardware appliance, a physical server of your own with Windows or Solaris OS, a VMware server with a Windows server OS guest, or a "soft appliance". The soft appliance is package built with the underlying guest OS (a customized RHEL distribution with Cisco's Application Development Environment OS (ADE-OS)) built-in.
Once you have installed LMS 4.2, you should patch - first to 4.2.2 and then to the current 4,2,3. then run the software update feature to bring all package components up to date.
Regarding licensing, there is a Cisco Prime Infrastructure Ordering and Licensing Guide here.
When you order the licenses for PI 1.2 (new customer), you order the base product and then Lifecycle licenses (required for either PI 1.2 Lifecycle and LMS installations - which option is a customer choice) and, optionally, Compliance and Assurance licenses. An upgrade order for an existing LMS customer will include the base PI 1.2 with Lifecycle licenses as well as LMS in a single SKU as noted in tables 4 and 5 of the Ordering Guide.

Cisco Prime Infrastructure 1.2 licensing

I have a customer that is running CiscoWorks 3.2 and they also have NCS 1.1 (upgraded from WCS 7.0). They have found that it costs way more to upgrade CiscoWorks to Cisco Prime Infrastructure than it would be to just buy licenses after they finish upgrading NCS to Cisco Prime 1.2.
The main question about Cisco Prime 1.2 is how the licensing works, we need to know if the licensing will work the same as it did for CiscoWorks where they only needed one license for a full stack of switches. They believe that Prime 1.2 will require a license for each switch in the stack, which will cause them to buy several more licenses than what they feel they can afford.
If anyone knows how the licensing works, it would be appreciated.
Thanks.

Have you gone through the below link
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide_c07-714720.html

Cisco Prime Infrastructure and no new events / alarms since update to 2.2.1

Hello,
I have upgraded our Cisco Prime Infrastructure from version 2.1 to 2.2.1 (with a backup and restore). We have round about 700 APs and three 5208 Controller. So far everything seems to work really fine. The only problem is that there are no new alarms/events under "Monitor", "Alarms and Events".
The last entries (events and alarms) are dated before the upgrade. Other informations (like client counts for example) are correct.
Is there a known bug related to my problem? Can anybody help?
Thanks

I have done some research:
I see the following problems in the log-package (downloaded from Prime):
===
<msg time='2015-04-07T12:10:50.620+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
pid='9499'>
<txt>ORA-1652: unable to extend temp segment by 128 in tablespace TS_EVENTS
</txt>
</msg>
<msg time='2015-04-07T12:10:50.727+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
pid='15177'>
<txt>ORA-1652: unable to extend temp segment by 128 in tablespace TS_EVENTS
</txt>
</msg>
===
I think that there is a problem with a too small tablespace. But I can´t fix that. Anybody? ;)

Upgrade Cisco Prime Infrastructure 2.1.1 to 2.2

Similar Messages

Maybe you are looking for