Upgrade clusterware to 10.2.0.5

Experts,
Can we upgrade oracle clusterware from base version to 10.2.0.5 directly and similarly for RDBMS ?
Where can we download the patchset ?
Patchset number seems to be same for RDBMA and clusterware, is it so ?
Need help.
AIX 5.3
Oracle 10.2.0.5 - to be installed
2 node RAC
=== Riaz

- Download 10.2.0.5 sw and unzip
- Stop crs - $CRS_HOME/bin/crsctl stop crs.
- Run preupdate.sh available in installation files
- Run runInstall
- Specify correct Home
- Select node
- Run prerequisite checks and run installation
- Than run upgrade script as root
To check version run:
$CRS_HOME/bin/crsctl query crs activeversion
$CRS_HOME/bin/crsctl query crs softwareversion
Regards,
Marko

Similar Messages

After upgrading clusterware cannot stop crsd daemon

Red hat linux itanium, 2 node rac.
Clusterware/database was at version 10.2.0.3.
We have upgraded clusterware to version 10.2.0.4 (not yet upgraded the database) and have found although the crs stack starts up fine, when we issue:
# crsctl stop
The stack shuts down except for:
# ps -ef | grep crs
root 11610 1 0 16:33 ? 00:00:00 /bin/sh /etc/init.d/init.crsd run
Previously at 10.2.0.3 the stack shutdown cleanly, including the crsd daemon. If we issue a kill on this it respawns.

Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544
http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/

Upgrading clusterware and RAC database including ASM

Hi All,
I have a 3 node RAC database with ASM running on RHEL4(32bit). current version is 10.2.0.1. I want to upgrade clusterware, database and ASM to 10.2.0.4.
Please let me know the patch number for this upgradation.
At the time of googling i found that 1st we have to upgrade 10.2.0.1 to 10.2.0.3 then we can upgrade it to 10.2.0.4. Is it true?
Thanks

You are absolutely correct. Database should be upgraded at last. I may be wrong regarding upgrading of ASM. but what my thought is saying it should be upgraded or it may upgrade when we will upgrade our database. So please think little bit on it. ASM has its own instance. we are upgrading clusterware and database. why we are not upgrading our ASM. Then what should be the method to upgrade ASM.
Please correct me in i am wrong.
With Regards,
snp

Patch number to upgrade clusterware from 10.2.0.1 to 10.2.0.5

Hi,
Please let me the know the patch number for clusterware to upgrade from 10.2.0.1 to 10.2.0.5 in RHEL 5.
Thanks,
Nagy.

Pl see these MOS Docs, depending on whether your OS is 32bit or 64bit
10.2.0.5 Patch Set - Linux x86 (32bit) README (Doc ID 1280607.1)
10.2.0.5 Patch Set - Linux x86-64 README (Document 1280606.1)
HTH
Srini

Upgrade Clusterware

Dear DBAs,
Is there an upgrade/patches for the Oracle clusterware to 10.2.0.4.0 on windows 2003?
could you please send me the full link because i get lost in the Metalink site.
Regards

Hi,
there is a patch Patchset 6810189 - 10.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER
but before you upgrade database ream README first and backup database.
Regards,
Tom
http://oracledba.cz

How to not upgrade clusterware 10203 when upgrading another oracle home

Hello,
We have a 4 node rac 10.2.0.3 and 10.2.0.3 clusterware on red hat 4. We want to install a new none-rac home on one of the nodes and patch that new none-rac home to 10.2.0.4. But if we install and patch the new 10.2.0.4, what happen to the clusterware already running on the 4 rac-node? What we want is to avoid upgrading the clusterware 10.2.0.3. We just want to install a new none-rac on one of the nodes and not touch the clusterware that is already running for the rac-node, 10.2.03. My question is, when installing a new separate none-rac oracle home 10.2.0.4 on RAC, does the new none-rac detect the clusterware 10.2.0.3? If so, what to do so the clusterware 10.2.0.3 is untouched when installing a 10.2.0.4 new none-rac oracle home? Thank you.

As long as you choose a different path name for your new 10.2.0.4 oraclehome, there is no problem. ;)
does the new none-rac detect the clusterware 10.2.0.3?Not if it's NON RAC!

Oracle clusterware upgrade 10.2.0.4

Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4....
why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware and database to 10.2.0.4
Now due to some problems clusterware got crashed and we installed new clusterware 10.2.0.1 and need to upgrade clusterware to 10.2.0.4 with out touching the Oracle RAC database which is already upgraded to 10.2.0.4...
early response is appreciated

Clusterware sits in its own home ... what specifically is the issue not answered by the docs so we can help with the current issue?
Installation docs can be found at http://docs.oracle.com and there is additional support at metalink.

Upgrade 10.2 clusterware to 11.2 ?

Hello. Having working 10gR2 2-node cluster. Want to upgrade to version 11.2 but for some time running both versions. Probably it is possible, Oracle states that "if you run Oracle RAC 10g and 11g in the same cluster, you must run Clusterware 11g (only)". So, I must first upgrade clusterware, is it possible ?

Yes, It's supported and you first must upgrade Clusteware before upgrade Database RAC.
You can only have one installation of Oracle Clusterware running in a cluster, and it must be installed into its own home (Grid_home). The release of Oracle Clusterware that you use must be equal to or higher than the Oracle ASM and Oracle RAC versions that are running in the cluster. You cannot install a version of Oracle RAC that was released after the version of Oracle Clusterware that you run on the cluster
Introduction to Oracle Clusterware

Clusterware upgrade to 10.2.0.4

Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4....
why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware and database to 10.2.0.4
Now due to some problems clusterware got crashed and we installed new clusterware 10.2.0.1 and need to upgrade clusterware to 10.2.0.4 with out touching the Oracle RAC database which is already upgraded to 10.2.0.4...
early response is appreciated

AIX is the operating system..... we installed new CRS ans it is functioning properly but now the problem is Clusterware version is 10.2.0.1 and ORacle RAC database version is 10.2.0.4.....
I read in some docs where Clusterware version should be same or newer level with Oracle RAC database home...
If there any patch can u just give the patch number for Clusterware 10.2.0.4....so that it can be downloaded from metalink.....

Need help on upgrade to 11.1.0.6 to 11.1.0.7 on RAC .

Hi,
we have a RAC setup with 2 nodes DB version is 11.1.0.6 and OS is LinuxX-86 64 bit machine. We found that 6890831 needs to be applied as a part of upgrade activity. I gone through read me of patch but have few doubts on the procedure. Can any body help me on the same?
Upon reading the document i am not clear on upgrade path like do i need to upgrade clusterware as well or not? Based on the initial study following action plan has been prepared by me, please correct me if my action plan is not correct.
1) Stop the DB.
2) Stop nodeapps.
3) Stop the CRS(using non-rolling upgrade).
4) apply the patch to CLUSTER ORACLE_HOME.
5) apply the patch to RDBMS ORACLE_HOME.
6) doing post-installation steps like DB upgrade.
Please emphasize on 4th step. Thanks in-advance.
Regards
APPS-DBA.

Upon reading the document i am not clear on upgrade path like do i need to upgrade clusterware as well or not?You need to upgrade the clusterware before RDBMS....therefore it is not optional. You first need to upgrade the clusterware and then the RDBMS.
The steps listed by you seems to be in order (from a high-level).

Clusterware patch for 10.2.0.4

Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4....
why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware and database to 10.2.0.4
Now due to some problems clusterware got crashed and we installed new clusterware 10.2.0.1 and need to upgrade clusterware to 10.2.0.4 with out touching the Oracle RAC database which is already upgraded to 10.2.0.4...
early response is appreciated

hi.
there is no separated patch... you must use the patch that you alredy download.
when you starts the OUI you need to specify the ORACLE_HOME of the clusterware. doing that the installation of the database is not touched.

RAC upgradation 9i to 11g R2

Hi,
I have been given the requirement to migrate a 9i RAC 3 node database( 9i cluster) to 11g R2 RAC database iam looking for a document or steps to do this activity. any help on this is highly appreciated.
should I upgrade the cluster first and then upgrade each node one by one or I should upgrade the cluster and upgrade all the home in one go ?
Thanks,
Satish Abraham.J

Hi,
Since you are using RAC database , you need to upgrade Clusterware (11.2.0.3) first , then RAC database upgrade(11.2.0.3).
For RAC Upgrade to 11.2.0.3 we have following options/upgrade_methods available:-
+1.Manual Upgrade (using catupgrd.sql script)+
You have to do this in two steps:-
9.2.0.3 ---->9.2.0.8 ----> 11.2.0.3
+2. Using DBUA (Database Upgrade Assistant)+
+3. Export / Import+
If you have MOS access, then you can refer following Note:-
*Different Upgrade Methods For Upgrading Your Database [ID 419550.1]*
Regards,

How to rollback crs upgrade?

Hi,
My database is running on two node cluster database.it is cluster filesystem. database is running on Windows server. Now database and clusterware are runing 10.2.0.2 version. we r going to upgrade clusterware to 10.2.0.4. once upgrade will fail .. how to rollback to 10.2.0.2? .plz help
Thanx in advance
Thanks,

You can Upgrade and Downgrade the OCR Configuration in Oracle RAC, here is the link
http://www.stanford.edu/dept/itss/docs/oracle/10gR2/rac.102/b14197/votocr.htm#BABDAIDI
oracle Clusterware downgrade is not supported, pls refer the below links
Re: downgrade database from 10.2.0.4 to 10.2.0.2
http://www.eygle.com/Notes/10204_patch_note_Linux_x86.htm
Hope this helps,
Regards,
http://www.oracleracexpert.com
Click here to [Time difference between the RAC nodes is out of sync|http://www.oracleracexpert.com/2009/12/time-difference-between-rac-nodes-is.html]
Click here to [Duplicate RAC Database using RMAN|http://www.oracleracexpert.com/2009/12/duplicate-rac-database-using-rman.html]

Please verify my RAC install with ASM procedure with a question.

Good morning.
My installation procedure on RAC with ASM (ASM will be on separate home from DB):
1. Install clusterware 10.2.0.1
2. Apply database patchset 6810189 upgrade clusterware to 10.2.0.4
3. Apply CRS patch bundle #4 8436582 to clusterware
4. Install oracle DB home 10.2.0.1
5. Apply database patchset 6810189 upgrade to 10.2.0.4
6. Apply DB PSU (patch# 8576156) 10.2.0.4.1 (includes CPUJUL2009) to the oracle home
(steps 7-9 are similar as step 4-5, except for ASM home. Or should I install ASM home before installing DB home? )
7. Install oracle DB home 10.2.0.1 for ASM and configure ASM
8. Apply database patchset 6810189 upgrade to 10.2.0.4 for ASM
9. Apply DB PSU (patch# 8576156) 10.2.0.4.1 (includes CPUJUL2009) to the oracle home for ASM
10. Run DBCA to create database.
Can I apply DB PSU (patch# 8576156) 10.2.0.4.1 (INCLUDES CPUJUL2009) to DB while the clusterware is 10.2.0.4, as I know DB version should not be higher than clusterware version? Or can I upgrade clusterware to 10.2.0.4.1?
Thanks for advice,

Hi,
Applying PSU (10.2.0.4.1) does not mean that you are moving to higher version of Oracle. Oracle releases will be like 10.2.0.4 , 10.2.0.5 like that.
10.2.0.4.1 is the PSU version for Jul 2009 PSU.
10.2.0.4.2 is the PSU version for Oct 2009 PST.
Like CPUs PSUs are also quarterly. It is not necessary oracle should release the PSU/CPU for every oracle home/CRS home every quarter.
For now, the PSU (Patch no: 8576156) is only applicable as shown below.
PSU 10.2.0.4.1 includes the following previously released bundle patches:
- Generic Recommended Bundle #4 (Patch 8362683)
- RAC Recommended Bundle #3 (Patch 8344348)
- Data Guard Broker Recommended Bundle #1 (Patch 7936793)
- Data Guard Physical/Recovery Recommended Bundle #1 (Patch 7936993)
- Data Guard Logical Recommended Bundle #1 (Patch 7937113)
Refer to the installation types of this patch (download README of this patch bundle).
Table 1 Installation Types and Security Content
Server homes - PSU 10.2.0.4.1
Client-Only Installations - None
Instant Client Installations - None
(The Instant Client installation is not the same as the client-only Installation.
For additional information about Instant Client installations, see Oracle Database Concepts.)
ASM (Automatic Storage - PSU 10.2.0.4.1
Management) homes
CRS (Cluster Ready Services) - None
homes
So, there is no PSU patch for this quarter for CRS Home. You may check the previous CPU/PSUs to make your home secured/updated with all patches.
Regards,
Vasu
Edited by: vasu77 on Sep 22, 2009 3:01 PM

Need help on Standby database v8.1.7 on Windows

Hello All,
Our current setup to create a standby database consists of a bunch of scripts. I'm trying to convert this such that we can use OEM 9.2 and have jobs to do the backup and be able to create the standby database using point and click. Does anyone have this setup?
This is where I am....I've created the primary database and the standby database. They both work well and next i try to do a failover. The failover works and my new primary database is now active. I want to recreate the standby database now (old primary).
I do a backup of the new primary database do say D:\backup\. I go on the standby and I restore the controlfile. Next when I attempt to do the restore, I get the following error: RMAN-03002: failure during compilation of command
RMAN-03013: command type: IRESTORE
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 1 found to restore.
How can i fix this? Is there a way to tell RMAN that the backup is under D:\Backup\? How do I catalog the files? I remember on 10g you could do this..but that's if you use a recovery catalog. In this case, i'm using the controlfile to do the restore...not using Recovery Catalog.
Any assistance is appreciated.
Thanks!

Upon reading the document i am not clear on upgrade path like do i need to upgrade clusterware as well or not?You need to upgrade the clusterware before RDBMS....therefore it is not optional. You first need to upgrade the clusterware and then the RDBMS.
The steps listed by you seems to be in order (from a high-level).

Upgrade clusterware to 10.2.0.5

Similar Messages

Maybe you are looking for