Upgrade CPU and RAM on Lenovo G480

Hello, I wanted to ask something: can I upgrade my CPU on my lenovo G480? And in case of a positive answer, which CPU's are compatible with it? Also, I bought an 8gb RAM, and installed it on my notebook, and it says that I have 12 GB of ram, but I read somewhere else that I can only have 8 GB of ram on my notebook... this means that what the system says is a lie and thus I still can only use 4gb of ram of the 12 that it shows? Thanks in advance.

Hi Snipercat94,
Welcome to Lenovo Community!
As per the query we understood that you are looking for CPU & memory up-gradation for your Lenovo G480.
Yes, you can up-grade the processor and the list is available in Hardware Maintenance Manual you can check it on page 101.
It is good to know that G480 is detecting 12 GB of RAM, and as per the OS it is showing 4 GB RAM that means you system is having 32bit Operating System, suggest you to install 64bit Operating System.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Portege R500 - Upgrade procesor and RAM

    Can I upgrade proceror and RAM in my R500?
    Is possible?? If yes, how procesor can i used?
    Robert

    hi RoboS,
    first of all the modell number is needed to check which hardware is in the machine.
    to upgrade ram: easy - there should be a door marked with a ram-symbol on the bottom of the machine. open up and insert more memory
    make sure that the system is powerless: remove ac-adapter and battery!
    make also sure that the new ram modules meets the specifications.
    upgrade the cpu: much more difficult and toshiba dont support this upgrade...
    search for your modeltype with a bigger cpu and check if it has a socket (should be), this cpu should go together with your machine...
    but remember: double the ram isnt that expensive than upgrade cpu and you have more fun with a bigger amount auf ram than a bit faster cpu....

  • Where to see CPU and RAM usage in IPAD 1

    Hi:-)
    While i have Apps running , I would like to be able to see CPU and RAM in use..and ideas how/where?
    Thanks

    There are several apps in the app store that can show you cpu and ram usage of your device, e.g. "system info"

  • Z77A-gd65A boot error code 15 rebthing i removed all except cpu and ram and oot

    my pc used to work fine yesterday i shut it down and started it today and it kept cycling rebooting at code 15 on debug i changed to bios B and the same thing did clear cmos both ways even removed  the battery the same also removed all except cpu and ram but still the same result please help !

      I have no idea how you possibly could corrupt bios A if you weren't running Live Update or manually attempted to flash. if bios is really corrupted follow: >>Flashing a Corrupted bios when the alternate bios still works<<

  • CPU and RAM size for database

    How can we see what is the CPU and RAM size for the database?
    <div class="jive-quote">select * from v$version</div>
    BANNER                                                          
    Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
    PL/SQL Release 10.2.0.5.0 - Production                          
    CORE     10.2.0.5.0     Production                                        
    TNS for HPUX: Version 10.2.0.5.0 - Production                   
    NLSRTL Version 10.2.0.5.0 - Production

    cat /proc/meminfo
    root:     total:      used:      free:           shared:     buffers:     cached:
    Mem:      1055760384     1041887232     13873152     0     100417536      711233536
    Swap:      1077501952      8540160      1068961792
    MemTotal:          1031016 kB     
    MemFree:          13548 kB
    MemShared:          0 kB
    Buffers:          98064 kB
    Cached:               692320 kB
    SwapCached:          2244 kB
    Active:               563112 kB
    Inact_dirty:          309584 kB
    Inact_clean:          79508 kB
    Inact_target:          190440 kB
    HighTotal:          130992 kB
    HighFree:          1876 kB
    LowTotal:          900024 kB
    LowFree:          11672 kB
    SwapTotal:          1052248 kB
    SwapFree:          1043908 kB
    Committed_AS:          332340 kB
    cat /proc/cpuinfo
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 15
    model : 31
    model name : AMD Athlon(tm) 64 Processor 3000+
    stepping : 0
    cpu MHz : 994.927
    cache size : 512 KB
    fpu : yes
    fpu_exception : yes
    cpuid level : 1
    wp : yes
    flags : fpu vme de pse tsc msr pae mce (snipped)
    bogomips : 1956.97
    TLB size : 1024 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 40 bits physical, 48 bits virtual
    power management: ts fid vid ttp

  • MOVED: getting most ffrom my cpu and ram cinfigd in the bios

    This topic has been moved to Overclockers & Modding Corner.
    getting most ffrom my cpu and ram cinfigd in the bios

    You can use CPU-Z to check your settings.  I find it best to just use good ole bios overclocking.  Set ram 1:1(FSB/Dram ratio) and FSB to 200 that that should give you 2200Mhz.

  • Kernel_task is spending too much CPU and Ram

    I have Macbook Pro 13' mid 2012 I bought it 9/2013 and its started to become too slow like seriously slowed when I check the Activity Monitor kernel_task spend too much RAM and CPU and because of the usage of CPU my computer becomes overheated. This what comes up when I do the EtreCheck;
    EtreCheck version: 1.9.15 (52)
    Report generated 5 Sep 2014 18:00:42 GMT+3
    Hardware Information: ?
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 4000 - VRAM: (null)
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:36:17
    Disk Information: ?
      APPLE HDD HTS547550A9E384 disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209,7 MB
      Macintosh HD (disk0s2) / [Startup]: 499,25 GB (321,73 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information: ?
      Logitech USB Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Anywhere
    Kernel Extensions: ?
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
    Startup Items: ?
      FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.skype.skypeinstaller.plist Support
      [loaded] com.teamviewer.Helper.plist Support
      [not loaded] com.teamviewer.teamviewer_service.plist Support
    Launch Agents: ?
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [not loaded] com.teamviewer.teamviewer.plist Support
      [not loaded] com.teamviewer.teamviewer_desktop.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
      [loaded] com.BlueStacks.AppPlayer.Service.plist Support
      [loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
      [loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ?
      None
    Internet Plug-ins: ?
      DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
      Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
      FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 537 - SDK 10.9
    Safari Extensions: ?
      Searchme-2
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins ?
      BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
    3rd Party Preference Panes: ?
      Fan Control  Support
      Flash Player  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          22% Skype
          10% WindowServer
          7% coreaudiod
          4% Google Chrome
          3% sysmond
    Top Processes by Memory: ?
      181 MB Skype
      84 MB Google Chrome
      61 MB mds_stores
      57 MB systemstats
      57 MB WindowServer
    Virtual Memory Information: ?
      1.48 GB Free RAM
      1.51 GB Active RAM
      392 MB Inactive RAM
      637 MB Wired RAM
      561 MB Page-ins
      0 B Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • HELP: Premiere Pro CC not using all CPU and RAM during rendering and export

    Hello,
    I am using Premiere Pro CC on a Windows 7. My timeline is quite simple with two videos, one with the movie (mpeg) and the other with the subtitles (avi).
    When I render the sequence in PP or export, the rendering time is way too slow and it only uses around 15-20% of the CPU and 3 GB of RAM.
    My hardware config is :
    - CPU : i7-4770k 3.50Ghz
    - RAM : 8 GB
    - Disk : 2 x 3 TB SATA (no raid)
    RAM is not the bottleneck, neither the disk access.
    I have tried rendering and exporting the same project on an iMac (with an i5 2.7 Ghz and 4 GB RAM and only 1 disk) and the result is 4x faster !!!
    The CPU usage is close to 100% as well as RAM usage.
    So how come PP uses all resources availble on an iMac and not on a Windows 7 ?
    Is there any known bug or software bottleneck on Windows 7 ?
    My machine is brand new and nothing much installed besides Adobe products.
    Any help is very much appreciated.
    Thanks,

    I just rendered out a a 2 minute sequence with about 100 clips in it and Colorista effects on everything to the Vimeo 1080 H264 preset. It took about 5 minutes to render straight from Premiere, it used all the recourses it could, my CPU was running at near %100, same with my ram and GPU, I was happy.
    Then I did another render with Red Giant Denoiser and it now wants to take 30 mins and it is only using about %20 of the recourses available. My problem isn't that its taking longer with Denoiser but that its not using all of my computers CPU and GPU.
    Im rendering at maximum render quality and bit dept to H264 (Im happy to wait the extra time), if I try to use VRB 2 it encodes 1 pass at a time and wants to take up to 40 minutes.
    I would appreciate some advice on this.
    Premiere Pro CC 2013
    2.6 GHz Intel Core i7
    NVIDIA GeForce GT 750M 2048 MB (CUDA GPU enabled in Premiere)
    16 GB 1600 MHz DDR3
    OS X 10.9.4 (13E28)

  • Measuring the cpu and ram consumption of a given query in sql server

    hello there how you doing and am new to this sql server forum and i suddenly popped to ask questions related to sql server
    and my question goes like this
    in sql server i have table called testt and it have more thna10000000 records
    and i have written a query select * from testt limit 9000000; and what i want is to measure the
    CPU consumption of this given query=???????????????
    and
    RAM consumption of this given query=???????????????
    Time consumption of this given query=?????????????? this i will get it from the result bar but i don't know whether it is correct or not
    any help on this it may be query, tool or configurations all are acceptable and appreciated
    10Q for letting me ask questions and feeling freely.

    Please check these queries and this may helps you to get whats happening on with CPU currently..
    SELECT getdate() as "RunTime", st.text, qp.query_plan, a.* FROM sys.dm_exec_requests a CROSS APPLY sys.dm_exec_sql_text(a.sql_handle) as st CROSS APPLY sys.dm_exec_query_plan(a.plan_handle) as qp order by CPU_time desc
    Top 50 CPU usage :
    SELECT TOP 50 st.text
                   ,st.dbid
                   ,st.objectid
                   ,qs.total_worker_time
                   ,qs.last_worker_time
                   ,qp.query_plan
    FROM sys.dm_exec_query_stats qs
    CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
    CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) qp
    ORDER BY qs.total_worker_time DESC
    SP_Whoisactive --- download from : http://www.brentozar.com/responder/log-sp_whoisactive-to-a-table/
    Activity Monitor and sp_who2 active also will give some idea...
    Reference links...
    http://channel9.msdn.com/posts/SQL-server-High-CPU--Part-1
    http://channel9.msdn.com/posts/Troubleshooting-SQL-server-High-CPU--Part-2
    http://jeffstevenson.karamazovgroup.com/2008/09/identifying-high-cpu-sql-processes.html
    http://searchsqlserver.techtarget.com/tutorial/Step-1-CPU-usage
    ================
    Execute this script and and start doing your analysis in your server so that you will get more idea how its working and all the details...
    Sample CPU Test : Dont try this in production and try this in your test or Dev server..
    -- Query to Keep CPU Busy for 2 0 Seconds
    DECLARE    @T DATETIME, @F BIGINT;
    SET @T = GETDATE();
    WHILE DATEADD(SECOND,20,@T)>GETDATE()
    SET    @F=POWER(2,30);
    You can easily change the parameter in the DATEADD and can make it run for 50 seconds.
    -- Query to Keep CPU Busy for 50 Seconds
    DECLARE    @T DATETIME, @F BIGINT;
    SET @T = GETDATE();
    WHILE DATEADD(SECOND,50,@T)>GETDATE()
    SET    @F=POWER(2,30);
    Raju Rasagounder MSSQL DBA

  • Qosmio X775-3DV78 upgrades (HDD and RAM)

    I am looking to upgrade my laptop, is it possible to add more RAM to this? I see that the max is 8 gigs, anyway to upgrade it to use 2 - 8 gig sticks? Also, I am looking to replace the HDD with a faster SSD, any guides out there on how to do this? Thanks for the help!

    Solved: Since this board is so lively and bustling with activity for anyone else with the same quesion, I've upgrade to 16GB ram and a SSD HD. Go to crucial.com and check your sytem for available compatible upgrades.

  • MSI KT8 Neo2 F board, upgraded cpu and used MSIs Live Update, now unstable BSODs

    I've had this mobo for almost 2 yrs now with an AMD 3500+ cpu and recently upgraded that to the FX-55. To do that, it required using MSIs Live Update and needed newer chipset drivers. It has the latest bios according to Live Update.
      It took a few attempts but finally booted w/o BSODs and has been running for over 1 week BUT is still not right. It's sometimes unstable and will crash (BSOD) just by starting up a browser. I had the bios settings at "optimized" and have tryed a few other changes but so far, I'm not gaining. Last night I couldn't keep it running more than a few minutes w/o it crashing.
      I have the MSI manual for my board and plan to spend some more time playing with it tonight but might anyone here have any ideas? It's not running hot (reads 50C) and was stable before with the 3500+. I've tryed "Fail Safe" bios settings too but nothing's better that way either.
       I'm hoping that someone here has a few ideas?
    Perhaps related?
      After initially running this with the new cpu, I'd see the "searching for MAC address" message and it'd hang there on boot. Someone told me that was because it was trying to do a network boot, selected in the boot sequence SO I've unselected that and that's when things got worse (oddly as it shouldn't IMO). One can select the 3+ boot devices (floppy, USB, CD-DVD rom, HDD) and it use to see the HDDs (2) before but now I'm not (only floppy and CD-DVD rom) and if I unselect the ethernet option (boot other devices), it fails to boot at all and says "insert floppy" as if I was installing Win98 way back when (running XP Pro btw). Something's definately not right with my bios selections.

    Let's go back to basics here for a bit. Start by posting your complete specs in your signature like we do. Make sure that your PSU values are also in there.
    Let's also look at some tests to help determine where the issue is. I would recommend Memtest86+, OCCT, Prime95, and 3DMarks as a great first series. Also get CPUz and lets see what it shows for CPU and Memory.
    If we can get an idea where things begin to fall apart then maybe we can determine if this is driver, hardware or some other issue without having to make the flash happen first. The reason why I am avoiding the flash at this point is that if things are mostly working maybe there is some other cause than Bios. We know that some FX's work with 3.x and some that don't. So I would like to try a bit of checking before we dive into a flash that could cause more issues than it solves if we get this wrong. As things are mostly working now we can assume at least for the moment that maybe the flash is not needed. If we don't see anything during testing that sheds some light then maybe we go ahead with the flash.
    That is if your willing to take some time to try and sort this out and maybe learn some stuff in the process. It is of course your call and we will respect whichever decission you make here.

  • Upgrading the GPU, CPU and RAM of my Laptop n201ax

    This maybe is a really long post but please answer because i really need answers for each one of these questions and i really want to upgrade my laptop to the best configuration If i Can.Let me make this clear first.* In the upcoming content the words "this laptop" always refers to Hp Pavilion 15-n201ax*
    Okay so first of all i read somewhere that the maximum Ram of this laptop can be expanded till 16gb but the i came up with this link here -http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/I-would-like-to-upgrade-memory-of-my-laptop-HP-15-n201ax/td-p/5146905 And then i came to know that it can only be upgraded to 12gb by reading Page #2 Chapter 1 Description of this Guide-http://h10032.www1.hp.com/ctg/Manual/c04438537.pdfFirst of all i would like to ask is that, 1. Can i buy a ram of any brand but ofc the same clock speed ie 1600mhz?, so can i go for the GSkill 4gb 1600Mhz DDR3 ram?2. Does the size matter to the respective slots? or i can install the 8gb and 4gb ram in any alternate slots? So this was all about the RAM But i need to know if i can change the discrete GPU and APU of this laptop3. And if Yes - Which are the compatible mobile GPU's that i can install by removing the previous one ie AMD 8600M (For example the R9, R7 and R5 Laptop graphics)4. And Which are the compatible APU's that i can install by removing the previous APU ie AMD A10-4655M APU (For example the AMD FX APU for Laptops)5. If i can upgrade the GPU and APU both please tell that does the compatibility matters? like only a specific GPU can work with a specific APU ie like in this laptop AMD A10-4655M APU + AMD 8600M GPU. Please Help Me out, Please.Thanks in advance.

    Huffer wrote:
    Pavilion 15-n201ax? We are going to need to refer to the Service Manual here: Your Service Manual Officially, it only supports 12 gigs. Your model has a single 8 gig module so you have an open slot. Unofficially, may users here have reported that adding another 8 gigs to make a total of 16 gigs will work fine. But that is something you take the risk of doing, since it is unofficial.  The part numbers for the proper memory are listed on page 42. You need DDR3L-1600 SO-DIMM.  If you are going to go official, the 4 gig module is:   691740-001 This is it on amazon.com: http://www.amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/dp/B00CI08FX4/ref=sr_1_1?ie=UTF8&qid=1437948185&sr=8-1&keywords=691740-001 You should just leave the 8 gig where it is and add the new memory in the open slot.  On your model laptop, the GPU/APU is soldered to the motherboard. In order to do any upgrade you would need to buy a new motherboard. You have a whole incorrect idea that the GPU/APU can be removed and replaced and this is incorrect. The term APU means a processor that has video built in so the whole question about compatibility between GPUs and APUs just misses the mark. On some systems the GPU/APU is socketed and can be replaced which serves to replace/upgrade both the processor and video function but as stated above, on yours this involves pulling and replacing the whole motherboard.  There is a slightly better processor/graphics available using the AMD A10-5745M 8670M (2.9 GHz/2.1 GHz, 2 GB L2, 1333MHz DDR3L Quad 25W) for use with Windows Standard. The motherboard part is 734824-501 HP does not stock the board but I found this online: http://www.discounteddealz.com/product.asp?itemid=327740&gclid=CO78y6rn-cYCFQmCaQodOP0GLQ Never heard of this seller and can't vouch but the price is very reasonable for that board. I expected it to be quite a bit more which makes me wonder about this seller a bit. I would advise keeping what you have. It is very strong for AMD and upgrading to the A10-5745 board will only result in a very small uptick in performance at a very high cost in money and effort.  If this is "the Answer" please click "Accept as Solution" to help others find it. Hey sorry but i should have mentioned this before, I live in India and the links you provided are for amazon.comi tried to search on amazon.in and eneded up with this http://www.amazon.in/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=HP+691740-001+4GB%2C+1600MHz%2C+PC3L-12800+DDR3L+DIMM&rh=i%3Aaps%2Ck%3AHP+691740-001+4GB\c+1600MHz\c+PC3L-12800+DDR3L+DIMM Instead, can i get this one ? beacuse the hp one on the above result costs 41% more than the Transcend one below and that's very much http://www.amazon.in/Transcend-4GB-DDR3L-1600-LAPTOP/dp/B00B5LOOJG/ref=sr_1_2?s=computers&ie=UTF8&qid=1437984575&sr=1-2&keywords=ddr3l+4gb+1600mhz And last thing is that Will the performance be better if i go for Ram branks like Corsair or GSkill same types of memory?

  • Is it necessary to manually set cpu and ram specs in bios anymore?

    I just ugpraded with a K8N Neo2-F board, and Venice 3500+ cpu.   I didn't do anything in particular with the cpu/ram spec settings in the bios.  CPU-Z recognizes the cpu as a venice core 3500+, using multiplier 11 and fsb clock 200mhz, and the ram is recognized as 1GB pc2700, with assorted clock settings.  The ram is from Crucial and was spec'd out to my old MSI KT4AVL board, so I looked the same ram up again at Crucial.com, but it didn't list the various clock settings anywhere in the specs on that particular chip online.  At least the CAS Latency is showing up correctly in CPU-Z, from what the label on the ram says.  Should I just assume the other clock settings are correct, too?  How can I find out what they should be for my ram?  (I know - I should probably be using Corsair DDR400's like everyone else here, but $ is tight  so I just reused what I had...)

    RAM timings should be set up if you want the best performance. Alot of times the motherboard is able to determine this but not always. In CPU-Z there are two tabs related to memory. One is SPD which should show you the recommended timings for your memory, the other tab Memory should show you what your memory is currently running out. If they are different I would go with what is listed on the SPD tab and put those values in the bios.
    It would definitely be beneficial to upgrade your memory to 2 PC-3200 matched sticks, so you get the speed increase from the increased memory bandwidth and also so you can get dual-channel. I would put memory as the top priorty for the next item to get for the computer.
    Good Luck
    Jeremy

  • MSI GT660 Upgrade CPU and/or GPU

    I've searched the forum(and net) for this question but came up empty. Is it possible to upgrade MSI GT660's CPU(current i7-740QM) and/or GPU(current GTX-285M)? Any help would be greatly appreciated. Any idea if GPU on it is MXM 3.0 B(like on GX660) or a different type? If its possible - which(better) CPU/GPU are available that would fit?
    Thanks in advance!!!
    P.S. If anyone needs any help on upgrading RAM or HDD/SDD on this model - post your question here as i have done both(went to 10GB(4/4/2) of RAM, upgraded HDD to faster Samsung M4 and added 120Gb Sata6G SSD to 2nd bay) and will be glad to walk you through this(quite simple) process.
    Update: SOmeone send me a link to this - http://50.22.71.151/store/msi-nvidia-gtx-560m-1-5g-gddr5-mxm-3b-graphics-card.html
    And accoring to it GT660 is in fact MXM v3.0 B compatible. Just want to confirm it before pulling the trigger though(also would prefer a bit faster card since 560m is not much faster than my gtx-285m(well not faster to justify the upgrade price), was hoping to get AMD 6970M(or 6990 perhaps) if thats compatible with my system(already have 150w PSU)

    Hi,
    The following book shows you CPU's supported from day one:
      h10032.www1.hp.com/ctg/Manual/c02641795.pdf
    I don't think you can upgrade the GPU unless buying a new motherboard and many things.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Getting most ffrom my cpu and ram cinfigd in the bios

    Dera list,
    Hi there I am new to the list and have an k7n2 delta 2 platinum board I have upgraded to. I have 2gb of crucial ram and striped raid set up. This is a board upgrade.
    now the bios is well confusing in comparison to the via one I was using on my abit board.
    bascially my barton 2500 xp is unlocked and I can ramp it up to a 3200xp. Now I have ddr 400 ram and I want to tweak it as fast as I can while keeping it stable. now all this commander stuff is well confusing.
    basicall I want make sure the fsb is running at 400mhz or more, and the chip is at a 3200xp+. and stable, any one any suggestions for a start point so its all set manually rather than these auto functions which seem to exist.
    cheers
    brummie

    You can use CPU-Z to check your settings.  I find it best to just use good ole bios overclocking.  Set ram 1:1(FSB/Dram ratio) and FSB to 200 that that should give you 2200Mhz.

Maybe you are looking for