Upgrade CRM4.0 to CRM7.0
Hi,
we are planning a CRM upgrade from 4.0 to 7.0 and we are trying to get the picture what it would require. If someone could give some general answers or recommend suitable documentation for the below it would be most appreciated!
1. We use for example a lot of own-developed actions called manually from CRMD_ORDER, the user fills in values on new SAP GUI Dynpros and then we do a CRM_ORDER_MAINTAIN so the user can see the result back in CRMD_ORDER before saving. The user interface is IC/Transaction Launcher or SAP GUI. What would be the corresponding way to do it with the 7.0 Web UI (I heard CRMD_ORDER is even obsolete there)?
2. Is 7.0 a lot different from CRM 2007? We have some documentation about upgrade to 2007, is that more or less valid?
3. When is it better to use the Portal functionality and when Web UI?
Etc..
Regards,
Henrik
Hi stephen,
As per my understanding DynPro uses the SAP ASAP methodology to construct all version upgrade project task list.
There are five stages in upgrade process
Project preparation u2013 where we plan for project preparation and hard ware software requirement etc .now in current business scenario every organization have configuration up to that level
Business blueprint preparation u2013 here we identify the technical object abs strategy to upgrade ,this is
mainly a planning phase where we develop a blueprint how to upgrade
Relaization u2013 here we perform technical upgrade ,archiving the data ,perform testing ,upgrade dev
system , quality system etc
Final preparation u2013 here we plan for end user training and production system backup etc
Go Live and support phase.here we plan production system upgrade finally
resiezing is necessary for any upgrade project its a initial task which we perform.I am also seeking any documentation on this you said that we have some please <email removed by moderator>
Moderator message: Please do not post your e-mail address in the message.
take care
Thanks
Edited by: Stephen Johannes on Jan 29, 2009 8:12 AM
Similar Messages
-
Procedure and Process to upgrade CRM4.0 to CRM2007
Hi,
Could you please provide procedures and process for upgrading SAP CRM 4.0 to CRM 2007+ upgrade (Channel Management only)
Which will help us to assments and also upgrade process.
Thanks and Regards,
RaveendraNot got any information so closing the post.
-
Activity Monitor: activites created before upgrade not displayed
Hi experts,
After upgrade from CRM4 to CRM7, the activity monitor (tcode S_AE2_89000019) is not working proprely. After several tests and analysis, we came to the conclusion that the logical database CRMLDB_ACT_MON used by the SAP Query of the Activity monitor is not fetching all results.
It seems that activities created after upgrade are well fetched. Old activities are not fetched
Has someone experimented the same problem?
Is there a specific action to perform on logical databases after upgrade?
Thanks in advance for your helpHi Manfred,
Thanks for your answer. Unfortunately we haven't upgraded to Web UI yet..
I found the solution, I'm posting it just in case someone else is facing the same problem: CRMD_ORDER_INDEX is a table that consolidate orders data in order to make reports faster in CRM. This table is not updated after Upgrade, you need to run the program CRM_INDEX_REBUILD to have this table updated.
Many reports us this table. This report update data in new and obsolete tables as well (BUT021 and BUT021_FS) -
How to use SM7.0 to support an upgrade?
We have several upgrades for ECC5.0->ECC6.0, CRM4.0 ->CRM7.0, etc.
We have heard that SM7.0 can support the upgrade but do not know how.
Would you please share your experience? Blogs and links are highly appreciated.
Best regards!Hi Linda,
Please check the below blog to find the details about creating a project. Select Upgrade project as your project type.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID0726686550DB00233069886735880120End?blog=/pub/wlg/7317
This is not mandatory for doing any upgrade. You can always restrict the use of your solman for the creating key and maintenance optimizer function only.
Rajeev -
Hello Experts... Your kind and expert advice is deeply appreciated...
We had implemented a BADi in CRM4.0 and that is being called and working alright.
We are now upgrading CRM4.0 to CRM7.0. With this change classic BADis is not being called.
Difference I noticed in calling program is that in CRM 4.0 BADIs were pulled/instantiated by factory method. However in CRM 7.0 it uses "GET BADI" command. But since "GET BADI" does not fetch implemented BADi, it throws BADI not found exception.
- I searched and learnt that "Get BADI" can fetch classic BADIs and there is no need to migrate classic BADIs to new BADIs ...(if I am not wrong)..
- Also that I re-activated classic BADi in CRM 7.0 but still "Get BADI" does not pulled/instantiate BADi.
- Also I search to have report "ENH_BADI_ADD_MIGR_INFO" run to create link between Classic and new BADi. Will this work?
Kindly advice to call classic BADi in CRM 7.0? Appreciate it. Thanks!
Warm Regards,
KalpitHi,
Check if this BADI is migrated to enhancement spot (In attributes TAB). If yes, you need create an enhancement implementation for
this BADI.
Thanks,
SKJ -
How transport profile set in segment builder to other CRM system?
Hello!
I create a lot of profile set in segment builder. I using CRM4 and CRM7 wich connected RFC and middleware.
How transport profile group from CRM4 to CRM7?
Edited by: Vladimir Shilov on Dec 19, 2010 11:08 AMDear Thomas,
Did this get solved?
Thank you,
-Vijay -
ISA - Display subTotal1 - 6 of IPC in jsp page
Please help.
I am trying to display on the order.jsp the IPC objects subTotal1 through 6. I can see how to display the objects like netValue or TaxValue but I would like to also add some new lines in and display subTotal 1 through 6. I would like to to this at header level and item level.
Can somebody tell how this is possable.
Many thanksSteven,
I hope your still around, because I think maybe you can help us. We are upgrading CRM4.0 to CRM5.0. So, ISA and IPC code needs to be looked at and altered.
I'm not the person working on this, but trying to help out. In 4.0 there's code in order.jsp like this
JspUtil.removeNull(header.getIpcHost()) %>',
'<%= JspUtil.removeNull(header.getIpcPort()).trim() %>',
'<%= JspUtil.removeNull(header.getIpcSession()).trim() %>',
'<%= JspUtil.removeNull(header.getIpcDocumentId().getIdAsString()) %>',
The developer is saying getIpcHost no longer exists. Is there something to replace it? Is this no longer necessary because the IPC now resides on the same server?
Any help would be greaty appreciated.
Cat -
Error came in the phase : SQLSCREXE_ALI_ORG
Hi Technology consultants,
I am Upgrading CRM4.0 to CRM2007 on Oracle with Solaris 10, i got PREPARE phase completed successfully.But in UPGRADE phase getting an issue, Executes scripts for shadow instance was failed.
ERROR: during execution of script 'ALORDC.XQL'.
Error found in logfile or standard output file.
Check log files 'TPSQLSTD.OUT' and 'ALORDC.LOG'.
Still i am unable to solve the issue, plz do the needful.
Thanks & Regards,
srini.Hi Mark,
Thanks for ur response, i provided the logfile for ALORDC.XQL is
SQL script generated during phase SCRGEN_ALI_ORG.
aliases for original tables
> ALORDR.LOG
DROP SYNONYM "RSS_CTS_SERIAL";
DROP SYNONYM "RSS_DD12L";
DROP SYNONYM "RSS_E070";
DROP SYNONYM "RSS_E070A";
DROP SYNONYM "RSS_E070C";
DROP SYNONYM "RSS_E070M";
DROP SYNONYM "RSS_E070TC";
DROP SYNONYM "RSS_E071";
DROP SYNONYM "RSS_E071C";
DROP SYNONYM "RSS_E071E";
DROP SYNONYM "RSS_E071K";
DROP SYNONYM "RSS_E071KF";
DROP SYNONYM "RSS_E07T";
DROP SYNONYM "RSS_TADIR";
DROP SYNONYM "RSS_TLOCK";
#? EAZPGGYY
END
and TPSQLSTD.OUT logfile below mentioned
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 21421 at 20080829234927
ENV <0x8dec04>: auth_shadow_upgrade=1
ENV <0x8e52ec>: DIR_LIBRARY=/usr/sap/put/exe
ENV <0xffbffbf9>: dbs_ora_tnsname=C01
ENV <0xffbffc0d>: dbms_type=ORA
ENV <0xffbffc34>: NLS_LANG=AMERICAN_AMERICA.WE8DEC
ENV <0x8e56ec>: LD_LIBRARY_PATH=/usr/sap/put/exe:/usr/jdk/instances/jdk1.5.0/jre/lib/sparc/server:/usr/jdk/instances/jdk1.5.0/jre/lib/sparc:/usr/jdk/instances/jdk1.5.0/jre/../lib/sparc:/usr/sap/C01/SYS/exe/run:/oracle/C01/102_64/lib:/oracle/client/10x_64/instantclient_10202:/usr/sap/put/exe
ENV <0xffbffdc4>: ORACLE_SID=C01
ENV <0xffbffdd3>: ORACLE_BASE=/oracle
ENV <0x8df004>: dbs_ora_schema=SAPC01
ENV <0xffbffe13>: PATH=/oracle/C01/102_64/bin:/home/c01adm:/usr/sap/C01/SYS/exe/run:/usr/bin:.:/usr/ccs/bin:/usr/ucb
ENV <0xffbffe76>: ORACLE_PSRV=C01
ENV <0xffbfff53>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV <0xffbfff8a>: ORACLE_HOME=/oracle/C01/102_64
EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript C01 -x ALORDC.XQL
This is /usr/sap/put/exe/tp version 372.04.36 (release 700)
ERROR: Connect to C01 failed (20080829234927), failed to read table SVERS.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
TRACE-INFO: 1: [dev trc ,00000] Fri Aug 29 23:49:27 2008 56312 0.056312
TRACE-INFO: 2: [dev trc ,00000] load shared library (/usr/sap/put/exe/dboraslib.so), hdl 0
TRACE-INFO: 3: 40 0.056352
TRACE-INFO: 4: [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 1507 0.057859
TRACE-INFO: 5: [dev trc ,00000] -->oci_initialize (con_hdl=0) 42 0.057901
TRACE-INFO: 6: [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC 32477 0.090378
TRACE-INFO: 7: [dev trc ,00000] Logon as OPS$-user to get SAPC01SHD's password 66 0.090444
TRACE-INFO: 8: [dev trc ,00000] Connecting as /@C01 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
TRACE-INFO: 9: 58 0.090502
TRACE-INFO: 10: [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
TRACE-INFO: 11: 59 0.090561
TRACE-INFO: 12: [dev trc ,00000] 0 WE8DEC 1 1014cb238 1014d2cb8 1014d6650
TRACE-INFO: 13: 46 0.090607
TRACE-INFO: 14: [dev trc ,00000] Allocating service context handle for con_hdl=0 188 0.090795
TRACE-INFO: 15: [dev trc ,00000] Allocating server context handle 41 0.090836
TRACE-INFO: 16: [dev trc ,00000] Attaching to DB Server C01 (con_hdl=0,svchp=1014d6580,srvhp=1014d8920)
TRACE-INFO: 17: 104 0.090940
TRACE-INFO: 18: [dev trc ,00000] Assigning server context 1014d8920 to service context 1014d6580
TRACE-INFO: 19: 101760 0.192700
TRACE-INFO: 20: [dev trc ,00000] Allocating user session handle 68 0.192768
TRACE-INFO: 21: [dev trc ,00000] Starting user session (con_hdl=0,svchp=1014d6580,srvhp=1014d8920,usrhp=1014d34d0)
TRACE-INFO: 22: 65 0.192833
TRACE-INFO: 23: [dev trc ,00000] Assigning user session 1014d34d0 to service context 1014d6580
TRACE-INFO: 24: 37009 0.229842
TRACE-INFO: 25: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=55, stmth_p=1014e1360)
TRACE-INFO: 26: 154 0.229996
TRACE-INFO: 27: [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE (:A0, :A1); END;
TRACE-INFO: 28: 49 0.230045
TRACE-INFO: 29: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=55, stmth_p=1014e23b8)
TRACE-INFO: 30: 251 0.230296
TRACE-INFO: 31: [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO (:A0); END;
TRACE-INFO: 32: 43 0.230339
TRACE-INFO: 33: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=1014e23b8) 1809 0.232148
TRACE-INFO: 34: [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
TRACE-INFO: 35: 44 0.232192
TRACE-INFO: 36: [dev trc ,00000] Connected to session 53. 7380 0.239572
TRACE-INFO: 37: [dev trc ,00000] Now '/@C01' is connected: con_hdl=0, nls_hdl=0, session_id=53.
TRACE-INFO: 38: 41 0.239613
TRACE-INFO: 39: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=1014e23b8) 57 0.239670
TRACE-INFO: 40: [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
TRACE-INFO: 41: 42 0.239712
TRACE-INFO: 42: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=1014e23b8) 798 0.240510
TRACE-INFO: 43: [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
TRACE-INFO: 44: 43 0.240553
TRACE-INFO: 45: [dbsloci. ,00000] *** ERROR => ORA-1403 when accessing table SAPUSER 1046 0.241599
TRACE-INFO: 46: [dev trc ,00000] set_ocica() -> OCI or SQL return code 1403 32 0.241631
TRACE-INFO: 47: [dev trc ,00000] Disconnecting from connection 0 ... 83 0.241714
TRACE-INFO: 48: [dev trc ,00000] Rolling back transaction ... 78 0.241792
TRACE-INFO: 49: [dev trc ,00000] Closing user session (con_hdl=0,svchp=1014d6580,usrhp=1014d34d0)
TRACE-INFO: 50: 358 0.242150
TRACE-INFO: 51: [dev trc ,00000] Now I'm disconnected from ORACLE 1962 0.244112
TRACE-INFO: 52: [dev trc ,00000] Try to connect with default password 30 0.244142
TRACE-INFO: 53: [dev trc ,00000] Connecting as SAPC01SHD/<pwd>@C01 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
TRACE-INFO: 54: 44 0.244186
TRACE-INFO: 55: [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
TRACE-INFO: 56: 47 0.244233
TRACE-INFO: 57: [dev trc ,00000] 0 WE8DEC 1 1014cb238 1014d2cb8 1014d6650
TRACE-INFO: 58: 45 0.244278
TRACE-INFO: 59: [dev trc ,00000] Assigning username to user session 1014d34d0 37 0.244315
TRACE-INFO: 60: [dev trc ,00000] Assigning password to user session 1014d34d0 37 0.244352
TRACE-INFO: 61: [dev trc ,00000] Starting user session (con_hdl=0,svchp=1014d6580,srvhp=1014d8920,usrhp=1014d34d0)
TRACE-INFO: 62: 46 0.244398
TRACE-INFO: 63: [dev trc ,00000] Assigning user session 1014d34d0 to service context 1014d6580
TRACE-INFO: 64: 10253 0.254651
TRACE-INFO: 65: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=55, stmth_p=1014e0d78)
TRACE-INFO: 66: 89 0.254740
TRACE-INFO: 67: [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE (:A0, :A1); END;
TRACE-INFO: 68: 44 0.254784
TRACE-INFO: 69: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=55, stmth_p=1014e1360)
TRACE-INFO: 70: 87 0.254871
TRACE-INFO: 71: [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO (:A0); END;
TRACE-INFO: 72: 43 0.254914
TRACE-INFO: 73: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=1014e1360) 1098 0.256012
TRACE-INFO: 74: [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
TRACE-INFO: 75: 43 0.256055
TRACE-INFO: 76: [dev trc ,00000] Connected to session 53. 737 0.256792
TRACE-INFO: 77: [dev trc ,00000] Now 'SAPC01SHD/<pwd>@C01' is connected: con_hdl=0, nls_hdl=0, session_id=53.
TRACE-INFO: 78: 42 0.256834
TRACE-INFO: 79: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=1014e1360) 55 0.256889
TRACE-INFO: 80: [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
TRACE-INFO: 81: 43 0.256932
TRACE-INFO: 82: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=1014e1360) 775 0.257707
TRACE-INFO: 83: [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN ('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
TRACE-INFO: 84: 43 0.257750
TRACE-INFO: 85: [dev trc ,00000] ETER
TRACE-INFO: 86: 42 0.257792
TRACE-INFO: 87: [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.WE8DEC 975 0.258767
TRACE-INFO: 88: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=1014e1360) 81 0.258848
TRACE-INFO: 89: [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
TRACE-INFO: 90: 43 0.258891
TRACE-INFO: 91: [dev trc ,00000] DB instance C01 is running on crmdev1 with ORACLE version 10.2.0.2.0 since AUG 26, 2008, 16:38:03
TRACE-INFO: 92: 1023 0.259914
TRACE-INFO: 93: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=1014e1360) 58 0.259972
TRACE-INFO: 94: [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS') FROM V$DATABASE
TRACE-INFO: 95: 43 0.260015
TRACE-INFO: 96: [dev trc ,00000] build_stmt: reallocating stmt buffer: 256 -> 2000 characters
TRACE-INFO: 97: 19569 0.279584
TRACE-INFO: 98: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=26, stmth_p=1014e1360)
TRACE-INFO: 99: 111 0.279695
TRACE-INFO: 100: [dev trc ,00000] SELECT VERSION FROM SVERS
TRACE-INFO: 101: 43 0.279738
TRACE-INFO: 102: [dev trc ,00000] DbSlRead(): table='SVERS' 73 0.279811
TRACE-INFO: 103: [dev trc ,00000] OCI-call failed with -1=OCI_ERROR 1970 0.281781
TRACE-INFO: 104: [dev trc ,00000] SQL error 1031: 'ORA-01031: insufficient privileges' 32 0.281813
TRACE-INFO: 105: [dbsloci. ,00000] *** ERROR => Error 1031 in stmt_fetch() from oci_execute_stmt(), orpc=0
TRACE-INFO: 106: 89 0.281902
TRACE-INFO: 107: [dbsloci. ,00000] *** ERROR => ORA-1031 occurred when executing SQL stmt (parse error offset=20)
TRACE-INFO: 108: 60 0.281962
TRACE-INFO: 109: [dev trc ,00000] sc_p=1014177b8,no=0,idc_p=0,con=0,act=1,slen=26,smax=256,#vars=0,stmt=101570768,table=SVERS
TRACE-INFO: 110: 61 0.282023
TRACE-INFO: 111: [dev trc ,00000] SELECT VERSION FROM SVERS ; 28 0.282051
TRACE-INFO: 112: [dev trc ,00000] set_ocica() -> OCI or SQL return code 1031 28 0.282079
TRACE-INFO: 113: [dev trc ,00000] sc_p=1014177b8,no=0,idc_p=0,con=0,act=1,slen=26,smax=256,#vars=0,stmt=101570768,table=SVERS
TRACE-INFO: 114: 58 0.282137
TRACE-INFO: 115: [dev trc ,00000] prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=0,ocistmth_p=1014e1360
TRACE-INFO: 116: 42 0.282179
TRACE-INFO: 117: [dev trc ,00000] IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=0,vmax=0,bound=0,iobuf_p=0,vda_p=0
TRACE-INFO: 118: 46 0.282225
TRACE-INFO: 119: [dev trc ,00000] lobs=0,lmax=0,lpcnt=0,larr=0,lcurr_p=0,rret=0 30 0.282255
TRACE-INFO: 120: [dev trc ,00000] OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=72,vmax=32,bound=1,iobuf_p=1014d8848,vda_p=1015710d8
TRACE-INFO: 121: 46 0.282301
TRACE-INFO: 122: [dev trc ,00000] lobs=0,lmax=0,lpcnt=0,larr=0,lcurr_p=0,rret=0 30 0.282331
TRACE-INFO: 123: [dev trc ,00000] SELECT VERSION FROM SVERS ; 26 0.282357
TRACE-INFO: 124: [dblink ,01299] ***LOG BZA=>table SVERS does not exist on database [dblink#5 @ 1299]
TRACE-INFO: 125: 92 0.282449
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
tp finished with return code: 232
meaning:
connect failed
Process with ID 21421 terminated with status 232
But i checked /usr/sap/put/exe/R3trans -d it showing rc <0000>
and also i checked /usr/sap/<SID>/SYS/exe/run/R3trans -d it showing rc <0000>.
The logfile for ALORDC.SAV is
#---- MASKING file ALORDC.LOG from /usr/sap/put/log
#---- TIME: 20080826165921
tp_exec_statement: DROP SYNONYM "RSS_CTS_SERIAL"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_CTS_SERIAL" FOR SAPC01."CTS_SERIAL"
tp_exec_statement: DROP SYNONYM "RSS_DD12L"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_DD12L" FOR SAPC01."DD12L"
tp_exec_statement: DROP SYNONYM "RSS_E070"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E070" FOR SAPC01."E070"
tp_exec_statement: DROP SYNONYM "RSS_E070A"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E070A" FOR SAPC01."E070A"
tp_exec_statement: DROP SYNONYM "RSS_E070C"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E070C" FOR SAPC01."E070C"
tp_exec_statement: DROP SYNONYM "RSS_E070M"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E070M" FOR SAPC01."E070M"
tp_exec_statement: DROP SYNONYM "RSS_E070TC"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E070TC" FOR SAPC01."E070TC"
tp_exec_statement: DROP SYNONYM "RSS_E071"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E071" FOR SAPC01."E071"
tp_exec_statement: DROP SYNONYM "RSS_E071C"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E071C" FOR SAPC01."E071C"
tp_exec_statement: DROP SYNONYM "RSS_E071E"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E071E" FOR SAPC01."E071E"
tp_exec_statement: DROP SYNONYM "RSS_E071K"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E071K" FOR SAPC01."E071K"
tp_exec_statement: DROP SYNONYM "RSS_E071KF"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E071KF" FOR SAPC01."E071KF"
tp_exec_statement: DROP SYNONYM "RSS_E07T"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_E07T" FOR SAPC01."E07T"
tp_exec_statement: DROP SYNONYM "RSS_TADIR"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_TADIR" FOR SAPC01."TADIR"
tp_exec_statement: DROP SYNONYM "RSS_TLOCK"
TPWARN- (object not found)
tp_exec_statement: CREATE SYNONYM "RSS_TLOCK" FOR SAPC01."TLOCK"
tp_exec_dbscript: 30 statement(s) successfully processed.
#---- MASKING file ALORDC.LOG from /usr/sap/put/log
#---- TIME: 20080826171417
tp_exec_statement: DROP SYNONYM "RSS_CTS_SERIAL"
tp_exec_statement: CREATE SYNONYM "RSS_CTS_SERIAL" FOR SAPC01."CTS_SERIAL"
tp_exec_statement: DROP SYNONYM "RSS_DD12L"
tp_exec_statement: CREATE SYNONYM "RSS_DD12L" FOR SAPC01."DD12L"
tp_exec_statement: DROP SYNONYM "RSS_E070"
tp_exec_statement: CREATE SYNONYM "RSS_E070" FOR SAPC01."E070"
tp_exec_statement: DROP SYNONYM "RSS_E070A"
tp_exec_statement: CREATE SYNONYM "RSS_E070A" FOR SAPC01."E070A"
tp_exec_statement: DROP SYNONYM "RSS_E070C"
tp_exec_statement: CREATE SYNONYM "RSS_E070C" FOR SAPC01."E070C"
tp_exec_statement: DROP SYNONYM "RSS_E070M"
tp_exec_statement: CREATE SYNONYM "RSS_E070M" FOR SAPC01."E070M"
tp_exec_statement: DROP SYNONYM "RSS_E070TC"
tp_exec_statement: CREATE SYNONYM "RSS_E070TC" FOR SAPC01."E070TC"
tp_exec_statement: DROP SYNONYM "RSS_E071"
tp_exec_statement: CREATE SYNONYM "RSS_E071" FOR SAPC01."E071"
tp_exec_statement: DROP SYNONYM "RSS_E071C"
tp_exec_statement: CREATE SYNONYM "RSS_E071C" FOR SAPC01."E071C"
tp_exec_statement: DROP SYNONYM "RSS_E071E"
tp_exec_statement: CREATE SYNONYM "RSS_E071E" FOR SAPC01."E071E"
tp_exec_statement: DROP SYNONYM "RSS_E071K"
tp_exec_statement: CREATE SYNONYM "RSS_E071K" FOR SAPC01."E071K"
tp_exec_statement: DROP SYNONYM "RSS_E071KF"
tp_exec_statement: CREATE SYNONYM "RSS_E071KF" FOR SAPC01."E071KF"
tp_exec_statement: DROP SYNONYM "RSS_E07T"
tp_exec_statement: CREATE SYNONYM "RSS_E07T" FOR SAPC01."E07T"
tp_exec_statement: DROP SYNONYM "RSS_TADIR"
tp_exec_statement: CREATE SYNONYM "RSS_TADIR" FOR SAPC01."TADIR"
tp_exec_statement: DROP SYNONYM "RSS_TLOCK"
tp_exec_statement: CREATE SYNONYM "RSS_TLOCK" FOR SAPC01."TLOCK"
tp_exec_dbscript: 30 statement(s) successfully processed.
please do the needful.
Thanks and Regards,
srini. -
Hi All - I am upgrading from CRM2007 to 7.0 and I am facing a issue in XPRA_UPG phase where there are unprocessed BDocs. I used transaction smw03 to display them, but I am not sure how to process them or delete them.
A2PE/SAPCND/CUSTOMIZING 212 Generation for application "CRM", Usage "BO" and table "SAP12132" failed
A2PECND_MAST 299 Generation interrupted; process mBDocs first (see description)"CND_M_SUP"
A2PE/SAPCND/GENERATOR 215 Generation was prevented by an object.
A2PE/SAPCND/CUSTOMIZING 212 Generation for application "CRM", Usage "PR" and table "SAP12132" failed
A2PECND_MAST 299 Generation interrupted; process mBDocs first (see description)"CND_M_SUP"
A2PE/SAPCND/GENERATOR 215 Generation was prevented by an object.
Any input will be appriciated.
Regards,
KHi,
Have you got the answer to this question? I am also getting this error while upgrading CRM2007 to CRM7.0 in XPRAS_UPG phase.
CURRENTPHASE XPRAS_UPG
1PEPU203X> Messages extracted from log file "SAPR701WD1.CMS" <
Long text:
Cause
During the upgrade, a message relevant for postprocessing was written
to a log file. This message is not dealt with until the end of the
entire upgrade. The upgrade continues.
System Response
The upgrade stops in phase CHK_POSTUP. To create the reference to the
original log file, this message is generated by R3up.
What to do
Note the messages following this message and proceed according to the
instructions.
A2PECND_MAST 271 Error when generating table "CMBCCPSAP12130": Incompatible change (Description)
Long text:
Cause
You have tried to generate a CDB table. By doing so, the already
existing table has been changed in such a way that the corresponding
synchronization BDoc has been made incompatible. The incompatible
change could lead to data loss, and is therefore only possible with the
help of the CND_MAST_GEN_TRANSFER_OBJECTS report. This report should be
executed online.
System Response
Generation of the CDB table is terminated.
What to do
Inform your system administrator.
Tasks for system administration
Check whether the table, and therefore, also the BDoc may be made
incompatible. If this is the case, execute this with the
CND_MAST_GEN_TRANSFER_OBJECTS report.
A2PECND_MAST 271 Error when generating table "CMBCCPSAP12131": Incompatible change (Description)
Long text: see above
A2PECND_MAST 271 Error when generating table "CMBCCPSAP12132": Incompatible change (Description)
Long text: see above -
Can CRM4.0 be directly upgrade to CRM7.0?
Please help, thanks!
I agree with Markus that you probably want to have SMP access http://service.sap.com if you are planning an upgrade. If you are an SAP customer or partner then you should contact your local SMP administrator for an account. The master guides and upgrade guides are very well written and can take care of most of the basic needs.
That whole windows 2008 vs 2003 issue is a nasty one dealing with memory management. Technically even CRM 2007 customers need to move to windows 2008 due to memory management issues in windows 2003. That reminds I need to talk to my basis folks about that issue again.
Take care,
Stephen -
Project plan for upgrading CRM7.0 to EHP3
Dear Expert,
Currently we are preparing to help customer upgrade their CRM7.0 to EHP3,
and I am thinking the necessary steps for this upgrade project.
What in my mind currently are:
Basis team upgrade the system
ABAPer help to check the impact caused by upgrade and adopt code if
necessary
Function consultant to test all the as-is business scenarios to make sure
everything works fine
Is there anything else we need to do?
Thanks a lot for your suggestions in advance!
Regards
HedyYou should first check PAM whether the OS and DB are supported for the target release. The upgrade guide speaks about the preparation tasks and also about the follow activities for the Middleware. They basically come under the BASIS scope (Technical Upgrade). The best would be build a sandbox by copying the existing production and upgrade the sandbox system first and if it is convincing for the business then upgrade the whole landscape.
-
How to configure interaction center after upgrading to CRM7.0?
I upgraded a CRM to CRM7.0.
However, the interaction center is not working anymore. We cannot figure out.
Would you please help with your experience? Thanks!Hi Raghu,
The standard business process for handling complaints in the Interaction Center is defined at the following:
http://help.sap.com/saphelp_crm60/helpdata/en/1e/446b41466b021de10000000a155106/frameset.htm
Is there anything specific you want to do and you need suggestion?
Regards,
Deepak -
Is it possible to upgrade from CRM5.2 to CRM7.0
Hi all
i got the following doubt:
SAP CRM2007 is not yet released to customers and CRM5.2 is a ramp-up version.
If a customer stats today a CRM implementation which version could be suggested to implement?
CRM5.0 and then upgrade to CRM2007?
CRM52 and then upgrade to CRM2007?
Which one of the above mentioned options could be technically feasible?
Thanks and regards
C*Hi Carmine,
The upgrade path is available from CRM 5.0 to CRM 2007 as well CRM 5.2 to CRM 2007.SAP says the from CRM 5.2 migration have to be done to CRM 2007.
Currently only CRM 5.0 is available for the customers. CRM 5.2 and CRM 2007 are just the ramp up version which will be available for the Ramp up partners.
The ramp up version of CRM 2007 will be released on 14 Dec.
For a customer an imnplentation now can be suggested for CRM 2007, which will be available by Dec 14, there are around 150 seats available.SInce the latest vesion is more easy to use and user frndly as compared with CRM 5.0 It is completely Web based, using the IC Webclient framwqrk.
Wish the information is useful.
Regards,
Shalini Chauhan -
ECC6 Upgrade and EHP 4 because of a CRM7 in the landscape?
Hi,
I am in the way to upgrade my SAP 4.6c system to ECC6.
In my overall landscape, I have a CRM 7 installed.
Do you believe I need to perform a simple ECC6 upgrade or a ECC6 upgrade including EHP4 SR1?
In other words, is it mandatory to go through the Upgrade + EhP4 because I have a CRM 7 around?
Thank you,
ChrisHi,
according to my view upgrade from SAP 4.6c to ERP 6.0 EHP4 is easy because you can save your time in all preparation task that you to carry before starting upgrade as EHP upgrade itself takes time for preaprtion task....
also, you can reduce the downtime of your production environment if you will directly go to ERP EHP4..
As EHP4 takes significant downtime to upgrade the system ( also depends on hardware and database size)...
Also, you can reduce probablity of error free upgrade by carrying out one upgrade instead of carrrying out 2 upgrade (from SAP 4.6c to ERP6.0 then ERP6.0 to EHP4)...
Hope it clears to you...
Thanks
Sunny -
Upgrading ECC5.0 to ECC6.0 and Internet Sales ISA4.0 CRM4.0
We are performing a technical upgrade of ECC5.0 to ECC6.0 and we are seeking confirmation and instructions for connecting our existing ISA4.0 system to ECC6.0. I have searched OSS and SDN and queried our SAP account manager for some confirmation and documentation on ISA4 and ECC6.0 compatability
Any advice, confirmation and documentation on connecting Internet Sales version 4.0 component to ECC 6.0 is greatly appreciated.
Here are the details of our ISA4 system
Kind regards
ISA System
sap.com SAP-JEE 6.40 SP9 (1000.6.40.9.0.20041119045409)
sap.com com.sap.mw.jco (6.4009.00.0000.20041026130530.0000)
sap.com com.sap.security.dbschema (6.4009.00.0000.20041115123517.0000)
sap.com crm.b2b (400.200904212104)
sap.com crm.b2b_lanl (400.200904221705)
sap.com crm.b2c (400.1020060105115443.0000)
sap.com crm.mcm (400.1020060105115443.0000)
sap.com crm.shopadmin (400.1020060105115443.0000)
sap.com crm.trexr3 (400.1020060105115443.0000)
sap.com IAIKSecurityFS (1.3.12)
sap.com isacoreddic (400.1020060105115443.0000)
JDK 1.4.2_11-b06
TREX6.1
Windows 2003 (x86) 5.2
Warm regards
Lee LewisWhen an incorrect password is entered, the expected message:
"Name or password is incorrect (Please repeat logon) "
is displayed. When the correct password is entered, this message is displayed:
"Error in user administration"
No error messages are logged during the login attempt, only the following:
Message , Datasource
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.isacore.action.b2b.LoginAction' [path]='/b2b/reallogin' [forward]='/b2b/login/login.jsp' [exectime]='94' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofunctionexecution]='end' [funcname]='BAPI_USER_GET_DETAIL' [ashost]='sapsbx' [sysid]='SBX' [exectime]='31' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofuncionexecution]='begin' [funcname]='BAPI_USER_GET_DETAIL' [ashost]='sapsbx' [sysid]='SBX' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofunctionexecution]='end' [funcname]='SUSR_LOGIN_CHECK_RFC' [ashost]='sapsbx' [sysid]='SBX' [exectime]='15' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofuncionexecution]='begin' [funcname]='SUSR_LOGIN_CHECK_RFC' [ashost]='sapsbx' [sysid]='SBX' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofunctionexecution]='end' [funcname]='RFC_SYSTEM_INFO' [ashost]='sapsbx' [sysid]='SBX' [exectime]='0' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofuncionexecution]='begin' [funcname]='RFC_SYSTEM_INFO' [ashost]='sapsbx' [sysid]='SBX' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][actionxecution]='begin' [actionclass]='com.sapmarkets.isa.isacore.action.b2b.LoginAction' [path]='/b2b/reallogin' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.isacore.action.DetermineBrowserVersionAction' [path]='/b2b/login' [forward]='/b2b/reallogin.do' [exectime]='15' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][actionxecution]='begin' [actionclass]='com.sapmarkets.isa.isacore.action.DetermineBrowserVersionAction' [path]='/b2b/login' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Maybe you are looking for
-
Multiple users on multiple macs sharing iPhoto Library
How can different family members (using personal logins) all access the same iPhoto library, regardless of which of our two iMacs they happen to be logged into? I thought the solution would be as simple as: Plug an external hard drive into the Airpor
-
hello, i'm forced to develop in jdk 1.5 and need to use package javax.xml.stream (StAX), which is not included in jaxp1.3 (in jdk 5), so there is a need to somehow integrate jaxp 1.4 to jdk5. first thing i've tried was getting jaxp 1.4 src and includ
-
Having purchased an I pod almost a year ago I have had a problem free time with both my i pod and i tunes. However, a couple of wheels ago i tunes stopped working. This may have been because I purchased the Sony Ericsson w800i mobile phone and instal
-
Data open/save-as in Excel worksheet
Hi all, i created implement one diagram into my existing vi for opening and saving the data in microsoft excel worksheet but it doesn't work. I have been looking through Excel Macro Example but couldn't make sense of it much. still new in this and wi
-
HT1386 how do I get shared music to sync on my ipod touch
I have iTunes on 2 computers. They are now showing as shared but I can only sync to one computer at a time and it will wipe out the music from the other. I want the contents of both iTunes on my Ipod touch. thx