Upgrade CUEAC 8.6 to 9.1 remote server
Hi,
We have CUEAC 8.6 (physical server) and we'd like upgrade to 9.1 (virtual machine).
I have checked the upgrade process (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/arc/CUACEE_91110WAG.pdf) but the process describe the upgrade on the old server and we like upgrade (keeping the same configuration) to virtual machine.
do you know the process for install the version 9.1 and retrieve the configuration from the version 8.6?
How workaround I though convert the physical server in virtual and then upgrade (OS, SQL and finally AC), but I don't know what happen with the licenses. what do you think? thanks a lot.
Regards,
Alberto
Hi,
I have captured the info which says:
Licensing Your New Server
Each new Publisher server requires a new license file.
Immediately after installation your new server will run for a 5-day evaluation period without a license.
You can extend this period to 60 days.
To obtain a new full (purchased) license file, contact the Cisco Technical Assistance Center (TAC) with
either:
• The SO number for the software you purchased
• The license activation code (LAC) for your previous installation
and request a re-host. Cisco TAC will reset the LAC, which will allow you to generate a new permanent
license
regds,
aman
Similar Messages
-
My screen sharing functionality did not show up in the dock with an updated icon. It had a question mark- shows my connections but nothing works, I did make sure screen sharing is on and also connected to VPN. Once I tried to launch screen sharing nothing happens. Such an elegant solution in Mavericks not does not work. Ugh. Help!
This is the post that got me set up- I too am running an older version at work vs. Yosemite. As soon as I followed is advice everything worked.
Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?
I believe the location of the "Screen Sharing" app has changed, which explains why if you had it in the dock it has been replaced by a ?
Don't forget you can launch screen sharing (once your VPN connection is up) by typing in the Safari destination slot vnc://remotemachinename:portnumber (omit the :port number if you are using the default VNC port, 5900). This should launch Screen Sharing and put its icon in the dock. You can drag the Screen Sharing icon to the left of your dock and it will hopefully remain there after you exit Screen Sharing, or you can right-click on the icon when it's running and select Options->Show in Finder to find out its new location and drag its icon to the permanent entries in your dock.
Hope this helps; worked for me. -
Last night I received the Windows 8.1 update and it has caused Remote Server Administration Tools to stop working. I tried to reinstall the tools using Windows8.1-KB2693643-x64.msu but get the following error:
Windows Update Standalone Installer
Installer encountered an error: 0x8007000d
The data is invalid.
In the event log I have the following error
Windows update could not be installed because of error 2147942413 "The data is invalid." (Command line: ""C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu" ")
System
Provider
[ Name]
Microsoft-Windows-WUSA
[ Guid]
{09608C12-C1DA-4104-A6FE-B959CF57560A}
EventID
3
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-11-05T12:14:18.035865000Z
EventRecordID
1562
Correlation
Execution
[ ProcessID]
5224
[ ThreadID]
5132
Channel
Setup
Computer
removed
Security
[ UserID]
S-1-5-21-1644491937-764733703-854245398-1794
EventData
UpdateTitle
ErrorCode
2147942413
ErrorString
The data is invalid.
CommandLine
"C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu"
I did have the Remote Server Administration Tools installed previously when I was running windows 8 pro and everything was fine. I've tried to remove the older version but according to the below it isn't even installed and Remote Server Administration
Tools doesn't appear in Turn Windows features on or off.
c:\RSAT>dism /online /Get-Packages
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 24/09/2014 06:33
Package Identity : Microsoft-Windows-Embedded-EmbeddedLockdown-Package-TopLevel~31bf3856ad364e35~amd64~~7.3.9600.17116
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 14:46
Package Identity : Package_for_KB2891214~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2902816~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2920189~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931358~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931366~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2934018~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939153~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2950153~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2954879~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2955164~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2956575~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958262~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958263~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959626~31bf3856ad364e35~amd64~~6.3.3.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2961072~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962140~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962872~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2964718~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965142~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965500~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966407~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966870~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2967162~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2968296~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2968599~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2969817~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971203~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971850~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2972103~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2972280~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973201~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973351~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2974008~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2975061~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 07:11
Package Identity : Package_for_KB2975719~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2976978~31bf3856ad364e35~amd64~~6.3.2.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2977292~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2978041~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979573~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979582~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2980654~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2987107~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2989542~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2990532~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2993651~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2998174~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000061~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000869~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000988~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
The operation completed successfully.
Any help on this issue would be appreciated, if you need any further information please let me know.
ThanksSeniorInternet,
I’ve seen this issue in the past and it occurred because the file was corrupted.
It’s possible that something went wrong when downloading it originally on your newly upgraded machine.
Try downloading
KB2693643 again from another machine and install it.
Hope this helps!
Mike
Windows Outreach Team – IT Pro
Windows for IT Pros on TechNet -
Upgrade to CF9 breaks Flex to CF remoting
I have been developing Flex 2 (Cairngorm) remoting applications with Coldfusion 8 with integrated LCDS on IIS. I recently upgraded the server to CF9. Prior to the upgrade, remoting to my CFCs worked flawlessly. However, after the upgrade I get this error when calling Remote Object:
[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error Invalid URL"]
I develop on a machine (Michael) and the web root is on IIS server (mdr009). The web root on the IIS server is C:\Inetpub\wwwroot (which is also a shared folder). My compiler argument in Flex Builder is "-services "\\mdr009\wwwroot\WEB-INF\flex\services-config.xml" -locale en_US". This configuration worked with CF8 no problem, and works again when I uninstall CF9 and revert back to CF8.
I tried to disconnect the CF8/IIS connector, stop the CF8 services and set them to manual startup, but this doesn't seem to help any. I can change the URI endpoint in services-config.xml to any location like http://neverneverland/flex2gateway and still get the same error.
I have tried MANY different fixes, but can't seem to get it working. I'd be glad to supply more information if needed. Can anyone help me please?
-MichaelUpdate on this problem.
Figured out that Remoting is working. Something very wierd about this:
Noticed if I manually (in IE from LAN computers AND server) navigated to URL http://mdr009/flexprojects/requestutility/bin/requestutility.html got an error: CFC cannot be accessed remotely. This is different than the Channel.Connect.Failed error. I changed all my CFC function's access properties from "public" to "remote". The application works correctly.
Also noticed if I manually (in IE on server) navigated to URL http://localhost/flexprojects/requestutility/bin/requestutility.html the application throws a wierd error:
[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultString="Channel.Security.Error error Error #2048"]
If I try to launch from Flex Builder 2 (Run or Debug) it fails with original error:
[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultString="Channel.Connect.Failed error Invalid URL"]
Anyone? -
After upgrade to Yosemite SMB connection to remote server no longer works. WHY?
HI,
Before I upgraded to Yosemite I had mapped a connection to a directory on a remote server using SMB. After upgrading from OS 10.9 these connections no longer work.
Any idea why? Nothing on either the remote network server or the SMB mapping has changed.There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
This is currently investigated and tracked via this bug report.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working
<i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i> -
Hi! I'm hoping you can help eliminate my frustrations....
I purchased a macbook pro 13 inch because my other macbook 2009 was already low on memory and I thought it best to upgrade. I needed more space but wanted also the ability to access remotely and not worry about computer being stolen with all the information on it because I travel A LOT.
I asked the salesperson if I purchased the 128g MBP and the time capsule would i be able to access all my information remotely? The thought process was:
1. With over 500GB already in my previous MB i would transfer all that information from the old MBP to the time capsule where it would be at home safe
2. set up the time capsule to access all files remotely (including iphoto, itunes, videos, etc)
Because my information already was over 500Gb, buying the 2TB was going to be plenty of space. So I went with purchasing the MBP with lower space (128G) + the 2TB Time Capsule.
Now I'm trying to set everything up, was on the phone for 2.5 hours, spoke to 5 reps and finally received an answer: CAN'T DO IT. DOESN'T WORK THAT WAY.
I kept searching online and see that
1. the Time Capsule can only be used as a time machine for backups. Can't use as a remote server but others say you set up a server file and works.
2. I can't place the iphoto library or itunes library there to access remotely because I risk it being corrupted (sales person said it would run slow but worked well)
SO, the big question...can SOMEONE please help me determine if this was worth the $350 purchase because right now it feels like i'm better off sticking with my external drive from WD that i have been working with. I'm seeing ZERO value add for this device....
PLEASE...if someone knows if i can really get it to work for what I need, I would truly appreciate your advice because right now FRUSTRATION is at it's max...especially after 2.5 hours on the phone with little to no solutions.Some of this depends on your home internet speed.. do you have a fancy 1Gbit link.. with 100Mbps uplink.. well that is faster than rest of the internet.. so you can well support some sort of home cloud device.
I would also strongly recommend business level internet accounts with static Public IP address.. not dynamic.
For most people with limited upload speed.. 1mbit is standard where I live.. and real throughput is 800Kbps. Forget it.
I would never advise anyone to depend on remote access.. for anything with 1Mbps upload.. and even 5Mbps is going to be a struggle.. Maybe 10 or 25Mbps you can function.
It is simply not the right way to do things. You are far better off carrying around a 500GB thunderbolt drive.. which weighs next to nothing and is as fast as the internal drive.. or use a standard cheap 2.5" USB hard disk which you can get up to 2TB now.
Backup to TC but not by Time Machine.. or backup to the cloud.. for sure..
You can also access some files in the cloud. That is much better than using a TC at home.. where you then have a domestic quality link to the internet.
Apple specifically say not to use iphoto on network drives.. that means any network setup.
iTunes you can use from a network drive.. but if you have a massive library and slow upload speed it will never finish loading.
The internet for the most part is just not there yet.. maybe another 20years. In Australia that will be 100years with the current bunch of Philistines running the place. And if you do international travel and depend on networks in hotels or cafes.. well forget it.. they are going to give you enough bandwidth to load your email as long as it is pure text.
Apple have a 2week return period.. just take it back if you are unhappy with it. -
ACC Setup Error - Remote Server not Responding in the Proper Manner - Windows 7 Pro
Hello -
I was able to install the CC upgrades to all my software on my laptop without issue. Whenever I try to upgrade them on my desktop I recieve the attached error. I am running Windows 7 Professional. My guess this is being caused my my company's firewall however my IT director claims he set me up to bypass the firewall when trying to install this.
Thank you for your help.Hi Mike603,
Please refer to the following help document on error " Remote Server not responding".
http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html
Hope this helps.
Please let me know in case of any problem.
Regards,
Sumit Singh -
The remote server did not respond to a connection attempt
I have two Exchange 2003 servers: Old and New. Emails from the new server can go out however, users on the new server cannot receive emails from the old or the internet.
I get the following error:'....remote server did not respond to a connection attempt....'
All emails are stuck in newserver.domain.com.
KimaniBobHi KimaniBob,
Since Exchange 2003 is a very old Exchange version, we have not supported for Exchange 2003. It is recommended to upgrade your Exchange server to Exchange 2010. Your understanding will be appreciated.
Best regards,
Amy Wang
TechNet Community Support -
SQL developer on remote server
I am connecting through SQL developer installed on my machine to a remote Oracle DB. I get an error ORA-30687 when I try the debugging function on SQL Developer. I set the Debugger port in Preferences to 4000. Is there something I need to set on the remote server as well? I am asking this because I do not see any debugger service running on the remote DB server. Debugger function works well if I run SQL developer on remote machine itself and it seems it using random ports every time I run a script. No firewall between the two hosts, they are just in different subnets. How can I let my users use debugger function on a remote DB is basically my question.
Thanks!You don't say what sqldeveloper version you are using but I assume recent one which uses the 11g JDBC drivers. Connection to 8.1.6 is not supported wit that JDBC drivers
Your only chance is to download an older version of sqldeveloper, 1.5 or perhaps 2.1.
I realise it probably isn't in your control, but 8.1.6 has been out of support for many years and you really ought to upgrade., -
ABAP Database XIP must be started on remote server
Hi All
while starting the SAP through startsap.
startsap
Checking XIP Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.95 700 - AIX v11.65 5L-64 bit 090118
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 184746) is already running .....
saposcol already running
ABAP Database XIP must be started on remote server
while checking through the command R3trans -d
output is
R3trans -d
R3trans: Command not found.
scpa01:scpadm 3> r3trans -d
r3trans: Command not found.
scpa01:scpadm 4> R3trans -d
This is R3trans version 6.14 (release 700 - 25.10.10 - 11:48:42).
unicode enabled version
--- Unicode interface [nlsui1.c line 1842] pid = 197118 time = 1320146698:
Cmdline : R3trans -d
Function dlerrorU16 :
Array err_msgU length MAX_ERROR_LN is too small.
--- Unicode interface -
End of message -
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/XIP/SYS/exe/run') or dbms_type ('ORA')"
R3trans finished (0012).
What could be the error. Can anybody be help in this regards.
Thanks
Regards
RaviHi sunny
Output of trans.log is
cat trans.log
4 ETW000 R3trans version 6.14 (release 700 - 25.10.10 - 11:48:42).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 02.11.2011 - 09:49:50
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Nov 2 09:49:50 2011 90 0.000090
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000112
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 37 0.000149
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SCP/SYS/exe/run/dboraslib.o' ... 33 0.000182
4 ETW000 [dlux.c ,00000] *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SCP/SYS/exe/run/dboraslib.o") FAILED
4 ETW000 "errno=8, Exec format error" 1616 0.001798
4 ETW000 [dbcon.c ,00000] *** ERROR => Couldn't load library '/usr/sap/SCP/SYS/exe/run/dboraslib.o'
4 ETW000 52 0.001850
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SCP/SYS/exe/run') or dbms_type ('ORA')"
here it is written that maybe someone has set the invalid values for DIR_LIBRARY. we have upgraded the Oracle 10.2 to 11.2 & only changed in the scripts with values having 102 to 112 (/oracle/XIP/102_64/lib) to /oracle/XIP/112_64/lib) . i have again copied these files and changed it again and also checked the permission of these files & environment of sidadm also.
thanks
Regards
Ravi -
Twistedcaldav remote-server-not-found error
[notifications] 2012-01-01 18:53:11+0100 [XmlStream,client] [twistedcaldav.notify.XMPPNotifier#error] PubSub node creation error: <error code='404' type='cancel'><remote-server-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error>
Whenever I startup iCal on my OSX Server I see the following error.
Can anyone explain what this is caused by?
-Paul-''AG [[#answer-698983|said]]''
<blockquote>
disabling the .http2 configs did not work
is there a work around for the DNS "ANY" issue for me to try? I'll search.
A
</blockquote>
The easiest method is just to wait a few days for the Fx36.0.1 update. If you use
Firefox Menu Button -> Help -> AboutFirefox
each day that will check to see if the upgrade is available.
The bug fix is I think merely changing prefs and so you could do that yourself. It may be safer to use a spare additional profile, or backup the file ''prefs.js'' when trying that initially, because making mistakes in about:config may break Firefox.
* http://kb.mozillazine.org/Prefs.js_file
* http://kb.mozillazine.org/About:config
* [[Use the Profile Manager to create and remove Firefox profiles]]
Just toggling the pref '''''network.dns.get-ttl''''' to '''''false''''' should fix the issue, that basically is what is done in
Bug 1093983 - DNS resolver should not use 'ANY' to get cached records for TTL
One of the bug fixes about to be applied in the imminent Fx36.0.1 point Release -
I have installed the standalone beta on OS X and manually installed the Administrator files on my CF8 development server running Red Hat Enterprise 5.3 (SELinux is disabled). The Administrator starts with no problem on the server, just some info notices. I followed the excellent blog post linked earlier to set up the remote server, and got no errors on the client or the server.
However, the client never changes from "unknown" status. I tried changing the server config in builder to an incorrect port, to see if it was communicating with the server and I *did* get an error message in the console on the server. RDS works fine for files and datasources. I realize builder is only supported for Mac and Windows at launch, but I haven't seen anything about not supporting linux remote servers, which would be a show-stopper for us.
I also tried a CF9 beta server on RHEL, and saw the same problem. Any insight would be appreciated.Sure. The server is Red Hat Enterprise Linux 5.3 with SELinux disabled, 32 bit, kernel 2.6.18-128.2.1.e15.
Apache 2.2 (2.2.3-22.el5_3.2) unmodified.
CF 8.01, no hotfixes, standalone. Clean install of 8.01, not upgraded. Installed the administrator files by hand, fixed permissions.
CFBuilder is a standalone install, not plug-in, on OS X 10.5.7, Mac Pro, 8 cores, 10 gigs.
The test servers are VMs, so I can clone and break them if you want me to test anything. -
error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
successHi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support -
Log on to remote server and start database -error while installing CI in HA
Hello All,
We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node. Please find the log below.
TRACE 2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25742
INFO 2011-06-10 16:31:45.835
CJSlibModule::writeInfo_impl()
Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
WARNING 2011-06-10 16:31:46.345
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
Database PE2 must be started on remote server
Log on to remote server and start database
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2011-06-10 16:31:46.355
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25793
ERROR 2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </p> </body></html>
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly let us know how to rectify the error and prroceed further with the instalaltion.
Thanks
RishiDear Guys,
we didnt change the date and time but i m very sure it is same trans.log file.
for your kind information please note SID and Nodes details
Sid (PE2)
DB Node : DBMDB001
CI Node : DBMCI001
also i am attaching starting part of the file.
4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.11.2010 - 03:44:06
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Nov 7 03:44:06 2010 295 0.000295
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000317
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 116 0.000433
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
4 ETW000 64 0.000497
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 32161 0.032658
4 ETW000 [dev trc ,00000] Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
4 ETW000 39 0.032697
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 111 0.032808
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
patchlevel (0.25)
4 ETW000 265 0.033073
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 41 0.033114
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 82 0.033196
4 ETW000 [dev trc ,00000] New connection 0 created 52 0.033248
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.033289
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 84 0.033373
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 31 0.033404
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.033441
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 601 0.034042
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 25 0.034067
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 35674 0.069741
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
4 ETW000 57 0.069798
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 55 0.069853
4 ETW000 [dev trc ,00000] Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
151208)
4 ETW000 34 0.069887
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 52 0.069939
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 58 0.069997
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.070037
4 ETW000 [dev trc ,00000] Allocating server context handle 27 0.070064
4 ETW000 [dev trc ,00000] Attaching to DB Server PC1
(con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
4 ETW000 63 0.070127
4 ETW000 [dev trc ,00000] Assigning server context 0x600000000106de78 to service context
0x600000000106aa68
4 ETW000 60612 0.130739
4 ETW000 [dev trc ,00000] Allocating user session handle 97 0.130836
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0,
usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 64 0.130900
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 9302 0.140202
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
4 ETW000 198 0.140400
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;
4 ETW000 38 0.140438
4 ETW000 [dev trc ,00000] CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
erroneous calls
4 ETW000 291 0.140729
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
4 ETW000 33 0.140762
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 35 0.140797
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 937 0.141734
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.141770
4 ETW000 [dev trc ,00000] Connected to session 297. 639 0.142409
4 ETW000 [dev trc ,00000] Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
4 ETW000 38 0.142447
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 37 0.142484
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 36 0.142520
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 327 0.142847
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 36 0.142883
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 728 0.143611
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 38 0.143649
4 ETW000 [dev trc ,00000] Rolling back transaction ... 31 0.143680
4 ETW000 [dev trc ,00000] Closing user session
(con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
4 ETW000 210 0.143890
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 721 0.144611
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
700 151208)
4 ETW000 40 0.144651
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 37 0.144688
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 37 0.144725
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 35 0.144760
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 40 0.144800
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 337 0.145137
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 4085 0.149222
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
4 ETW000 63 0.149285
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 37 0.149322
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 585 0.149907
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.149943
4 ETW000 [dev trc ,00000] Connected to session 297. 350 0.150293
4 ETW000 [dev trc ,00000] Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
session_id=297.
4 ETW000 38 0.150331
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.150369
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 34 0.150403
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 294 0.150697
4 ETW000 [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
4 ETW000 66 0.150763
4 ETW000 [dev trc ,00000] ETER
4 ETW000 34 0.150797
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 329 0.151126
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 856 0.151982
4 ETW000 [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
4 ETW000 36 0.152018
4 ETW000 [dev trc ,00000] DB instance PC1 is running on scmdb001 with ORACLE version
10.2.0.4.0 since NOV 07, 2010, 03:23:10
4 ETW000 349 0.152367
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.152405
4 ETW000 [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
FROM V$DATABASE -
How to set up local server to use a remote server for login authentication?
Thank you in advance for any help you can offer.
We are trying to set up a "sub-network" (dont' know if this is the right terminology) using a 10.4 Server OS, to manage a set of clients... the trick is that the client login/home directory information is on a different remote server, and shall remain there, for the most part.
To make it easy to understand here's the environment:
*Local Server:* 10.4 G4 Server Quicksilver 1G dual--we have total control of this one
*Main/remote server:* 10.5 Xserve.. don't know which vintage--we have very very very little input on this machine.. effectively at the mercy of the sysadmin of this system who is very conservative in changing anything (hence the need for a separate server to install applications and client machine-specific profiles, etc since the Xserve admin refuses do it). This serves MacBooks/MacBookPros and few iMacs. (no Windows PC.. as that group of comptuers have their own server)
client: ~20 eMacs/iBooks all running 10.4.
use environment: elementary school-->very low network demand (no e-mail, just running local apps linking to server(s) for licensing and login, and some file saving small files on remote server, user preferences, etc).
The remote server (the Xserve) has all the login authentication, as well as the home directories. every school year, the directories get updated as new students enroll and old students graduate. Currently all the clients are directly linked to the Xserve via LDAP while we bring the local server on-line.
the local sever (our G4 Quicksilver) will have few network applications that will support the client machines. We also will be setting up computer accounts and groups for our clients so that we can properly set their environments (the Xserve admin will not do this on the Xserve, so currently all the clients are connecting to the server as a "guest computer" from what little I understand watching what was done)
now, what is the best way to approach this type of set up with minimal "inconvenience" of the Xserve admin?
I am pretty experienced with standalone UNIX and macOS X administration, but a novice to this whole Server and network setup thing. Any suggestions, instructions, pointers to URLs with how-tos is much appreciated. I am not afraid to use Terminal (grew up on UNIX before GUI), etc., and willing to try safe but unconventional setups if that is what's needed...
thanks for any help!Oh never mind.... I figured it out myself helps to read up on the manuals. d'oh. sorry for the bandwidth waste...
Maybe you are looking for
-
How can i use the apps i have downloaded on itunes
how can i use the apps i have downloaded on itunes
-
SGA_MAX_SIZE and SGA_TARGET in Oracle 10G
We have the following H/W with Solaris 9 SPARC-IV 16 CPUs 32GB RAM 128GB swap What is the optimal size of sga_target and sga_max_size that can be configured for a heavy batch processing oracle server. Nothing runs except oracle in the above server. W
-
hi, I need to write a new routine, Basic price + VAT *10% / 365 * no. of days in payment terms. Here value of no. of days is not picking up, field name is ZTERM. Any suggestions. vandana
-
In process Inspection Lot Qty and Actual Lot quantity difference.
Hi Experts, In case of In process Inspection Scenario : 1. Production Order created, released but before saving the qty is changed. 2. Production Order created released and saved. Then qty is changed in Change Prod order txn. These s
-
Using iWeb 1.1.1., my Blog entries typically include several photos. Increasingly I am finding that over time some of the photos on my Blog entries disappear, i.e., I now have an empty photo rectangle where I used to have a photo. All Blog photos wer