Upgrade directly from 2004s SP07 to SP10

Hi Guys,
our XI 7.0 is currently on SP07. We want to upgrade to SP10 and my question is, can I apply directly SP10 or do I have to import SP 08 and SP09 before?
Thanks for your help.
Cornelius

dont have much info on that side. maybe you cud do a post in the the Netweaver Admin forum for more on that details - SAP NetWeaver Administrator

Similar Messages

  • Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?

    Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?
    For those who have done this,
    1.  What quirks did you find that you had to overcome in your installation (I know that everyone's environment is different and produces differest results)?
    2.  What part of your code broke for which you had to find fixes?
    Tips and suggestions for a smooth installation, besides following the installation document.
    Thanks!

    Create a car (archive file) in CF 9 enterprise which will capture all CF 9 settings like Data sources, Web services etc. Make sure when you are doing this, pop up blocker is disabled.
    NOTE : While creating the archive file, give the full name with the absolute path in the package name. For example C:\Test\mypackage.car
    Then move this car file into the server where you want to install CF 11. Install CF 11 and then  deploy this archive (car) file. All CF 9 settings will be migrated to CF 11 enterprise.
    Else, if you want to install CF 11 on the same server where CF 11 is installed, then remove the connector for all the websites which are configured with CF 9, make sure the CF 9 services are running and then run the CF 11 installer and at the end of CF 11 installation, you will get a dialogue box which will ask you to migrate CF 9 settings in CF 11.
    Run the Code Analyzer in CF 11 Administrator to check whether any the CF 9 code used in your application is breaking in CF 11 or not
    HTH
    VJ

  • Can I upgrade directly from CS3 to CS5?

    Can I upgrade directly from CS3 to CS5?

    Deactivate CS3 on your old computer. Install and activate CS3 on your new computer. After you have done that, you can upgrade to CS5.
    From the forum thread posted earlier: If CS3 is detected by the installer as being already installed in the machine, it will read the old serial number transparently and will prompt you only for the serial number for CS5.

  • HT4854 Can I upgrade directly from OS X 10.6.8 to Mountain Lion

    Can I upgrade directly from OS X 10.6.8 to Mountain Lion??

    Yes, you can, but make sure your machine meets the system requirements:
    http://www.apple.com/osx/specs/
    When you upgrade, you need to do the following:
    1) Check all your software for compatibility with the new system.
    2) Repair the hard drive with Disk Utility.
    3) Make a full backup of your whole system using Time Machine.
    4) Ideally, make a second full backup of your whole system using something else, like Carbon Copy Cloner. (I consider two backups to be the minimum.)
    5) Wait until you have time to deal with any possible problems that crop up.
    6) Install the upgrade.
    Some people recommend erasing your hard drive and installing the new system "cleanly." That certainly helps ensure that you don't have any problems with the new system, but is often unnecessary. I prefer to save clean installs for when they are actually necessary, but that is only an opinion. You can certainly choose to do a clean install if you prefer.

  • Can I upgrade directly from elements 3 to the latest version?

    Can I upgrade directly from Elements 3  to the latest version?

    Yes. But compare prices. Sometimes sites like Amazon have a lower price for the full product rather than the upgrade version. They are identical; so buy whichever is cheapest.

  • Can I upgrade directly from..?

    Hi,
    I have a Panther 10.3 full version and I have purchased Tiger 10.4 a couple of months ago which is an upgrade version. I haven't got the chance to install it because I am moving to another country.
    I would like to know can I upgrade directly from 10.3 or I have to upgrade step by step till 10.39?
    Thank you

    Well, according to Apple's Tech Specs for Leopard (http://www.apple.com/macosx/techspecs/), you'll be just fine if you upgrade directly.
    I would upgrade to Tiger first though, and play it safe.

  • Upgrade directly from Exchange Server 2010 SP1 to Exchange Server 2010 SP3

    Hi,
    We have current setup with Exchange Server 2010 SP1 ( DAG & CAS Array with WNLB).
    Can we upgrade directly from Exchange Server 2010 SP1 to
    Exchange Server 2010 SP3 . ? 
    Thanks in Advanced.
    Regards,Ali

    Hi Ali,
    Yes, you can. Please upgrade your Exchange 2010 SP1 server roles in the following order: Client Access, Hub Transport, Unified Messaging, Mailbox, Edge Transport. What's more, please note that when you install a Service Pack or update rollup on a server
    that's a DAG member, several services will be stopped during the installation, including all Exchange services and the Windows Cluster service.
    For more information, here is a helpful article for your reference.
    Installing Update Rollups on Database Availability Group Members
    http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Will I be able to upgrade Directly from Snow Leopard ro Mountain Lion

    Hello All!
    Will I be able to upgrade Directly from Snow Leopard to Mountain Lion without going through Lion?
    Thanks in advance

    You have to upgrade Mac OS X Snow Leopard to Mac OS X Lion, Then Mac OS X Mountain Lion.
    If You have Snow Leopard, then upgrading to Mac OS X Lion is only $29.99 via the Mac App's Store, a one time fee for all your Macs. I recommend that you download it to all your devices first before you actually run the installation process. Once you've upgraded to Mac OS X Lion, then upgrade to Mac OS X Mountain Lion for a one time fee of $19.99.
    Mac OS X Mountain Lion will be available as a single software upgrade via the Mac App Store beginning in July 2012. The BEST PART is you only have to purchase it one time to upgrade all of your Macs. So its only like $50 bucks total for ALL your Macs to get both Lion and Mt Lion. Approximately, the same price it was when Snow Leopard's family pack came out for only up to 5 Macs. Except this time you get 2 upgrades for about the same cost for unlimited Macs compared to only 1 upgrade for up to 5 macs like before.
    To watch an exciting video from the WWDC/June2012 regarding what Developers, APP's, Lion & Mountain Lion, iPhone4S, and IOS6 will brings to the table this season, click below.:
    http://www.apple.com/apple-events/june-2012/
    I can't wait.
    Good Luck,
    Jenn

  • Can I Upgrade Directly From Tiger To Snow Leopard?

    I'm operating OS X 10.4.11 (Tiger) on a pre-2008 Macbook with an Intel processor. I'd like to upgrade to Snow Leopard.
    After doing a little research, I didn't see anything on the Snow Leopard packaging or on the Apple website which clearly states this, but can I upgrade directly to Snow Leopard? The Apple Store says Tiger users must buy the Mac Box Set (which includes iLife '09 and iWork '09). I really don't want to since I don't plan to use the features of iWork and can purchase iLife '09 separately.
    Basically, my question is, can I upgrade to Snow Leopard (using a Snow Leopard upgrade @ $29) and, if so, will my prior version of iLife still function or will I be forced to upgrade to iLife '09. I'd rather pay $95 for things I know I would use, compared to $170 for extra, unused software.
    Message was edited by: Ken Kasten

    http://store.apple.com/Catalog/US/Images/popups/upgrade-requirements-overlay.htm l
    "Snow Leopard Upgrade Requirements
    Snow Leopard requires an Intel-based Mac.
    Mac OS X v10.5 Leopard users, buy the upgrade.
    Mac OS X v10.4 Tiger users, buy the Mac Box Set."
    I don't think there is any technical limitation to installing a clean 10.6 "upgrade" on a compatible machine, running either 10.4 or 10.5, however, the 10.6 license, that buyers must agree with, relies on the "honor system" for compliance.
    I am about to upgrade my black MacBook to 10.6 with the Box Set, my Intel MacBook shipped with 10.4, one of the later models not long before 10.5 came out, and as I skipped 10.5, the 10.6 Box Set seems to be the only option, even though I am not interested in iWork so much.

  • Can I upgrade directly from Snow Leopard to Mt. Lion?

    I was just in the Apple store and the genius there suggested upgrading so I would have full use of iCloud between devices.  I've downloaded Mt. Lion but have not yet installed it.  Should I have done an intermediate upgrade to Lion first, or doesn't it matter.  (Slightly paranoid about making the jump, particularly if I'm liable to lose access to some programs through compatibility problems.)  The main reason for the upgrade was to get access to iCloud.
    currently on OS 10.6.8 on a Macbook 6,1, Intel Duo core 2.26 GHz processor, 2GB memory, 3 MB L2 cache.

    You may directly upgrade to Mountain Lion from Snow Leopard. It requires access to the Mac App Store &, at least. Mac OS X 10.6.8 which you have.
    I think skipping Lion is a good move. I no longer have it on any Macs in this house.

  • Upgrade direct from 9i File System DB to 10g ASM instance

    Can I upgrade from a 9i file system based instance directly to a 10g ASM based instance? without the middle step of a 10g file system instance.
    Thanks
    MN

    The minimum compatibility for ASM storage system is 10.1.0, it is not possible to manage 9i instances in ASM, and there is no way to waive the 10g migration requirement.
    If you are planning to use 10g ASM storage then you will have to migrate or upgrade your database to 10g first. Next you will have to move your datafiles, control and log files into the ASM storage.
    0. Configure your +ASM instance
    1. Upgrade to 10g (Upgrade procedure) or Migrate (exp from 9i/imp to 10g)
    2. In case you upgraded then use RMAN as stated in the below given reference to move your datafiles to the ASM instance, or if you created the database in 10g make sure you defined +ASM as the default storage mechanism
    Ref. Oracle® Database Backup and Recovery Advanced User's Guide
    10g Release 2 (10.2)
    Part Number B14191-03
    Chapter 16.
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmasm.htm#i1016581
    ~ Madrid
    http://hrivera99.blogspot.com

  • Document Problems when upgrading B1 from 2004 to 2005

    When upgrading from B1 2004 to b1 2005 any documents over 2 pages cause B1 to crash - anyone found the same problem or a solution.

    Hi clive
    When you say it crashes, does it just close and no error. i've came across that problem when making complex documents. If you have made your document as an A4 document, check what the default printer is? Go to file->page setup  .You'll see the printer it will print with and it's page size (letter,A4,etc). Make sure that is the same as the one you have set in the pld in the document.
    Hope this helps

  • Upgrade directly from 1.2 to 2.0?

    Hi,
    Do I need to upgrade from my current version of 1.2 to the last pre 2.0 version (1.4 or whatever it was last on) before I can upgrade to 2.0?
    Thanks a lot.
    -keith.

    Thanks for the response.
    I'll follow your advice and do the 2.1 upgrade....it never ends does it?
    Thanks again.
    -Keith.

  • Upgrading directly from windows 7 to windows 8 consumer preview?

    I am currently running windows 7 pro 64bit via bootcamp on my late 2009 macbook pro 15". i am wondering if it will work the same way if i use the windows 8 installer to upgrade the existing windwos OS as to install windows 8 consumer preview from scratch via bootcamp. Anyone?

    You are completely wrong. Doing any install as a upgrade over an older OS is never faster then doing a clean install. With upgrading the install routine has to move/save/overwrite/discard files that are no longer needed, or so the new version can be removed.
    MS has actually gone to Saving the old OS to a folder called WindowsOld and does basically a clean install. This started with Vista I think (although I'm not sure as I never used that Win OS and I NEVER do upgrades over the top of older OSs).
    That is just a very poor idea with either OS X or Windows, IMHO.

  • Can I upgrade directly from OS 10.4.11 to OS 10.6.3 on my 2GHz Intel Core Duo?

    <br mcebogus="1">

    Check that your current Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Specs:
    http://support.apple.com/kb/SP575
    If it does... then Purchase and Install Snow Leopard...
    Mac OS X 10.6 Snow Leopard

Maybe you are looking for

  • Issue with re-importing images after using Nik plugins

    Currently, when images are edited in a Nik plug-in and saved back to Aperture, the project folder the image originated in is changed from being organized by "date" to "manual" and then that image is inserted as the first image in that folder. In past

  • Brand new iMac screen is black

    Anybody have any idea what is wrong, the sound is working but I have no display at all.

  • Datatype missing in LDM diagram when reverse engineer from relational mode

    I'm using OSDM v3.3.0.734. I created relational model by importing DDL script. Then I reverse engineered to create LDM. However I don't see data types of attributes in LDM diagram. If I Right click --> View Detail -->All details still it doesn't show

  • Assets Capitalisation Entry

    Dear Friends, I am having One Assets Capitalisation Transaction Entry Problem. I have Configured L400000 GL Account for Assets Cost Debit & E21710 GL Account for Eliminate US Gaap GLR Credit for Assets Capitalisation Entry in AO90 in assets configura

  • Having 2 POVs in the same web form in HFM?

    Can we do that?. Also can we have like a text box in the web form in the top?