Upgrade Documentation in Technical Way

Hello All,
Can anybody provide me the step by step procedure for upgrade in a technical perspective way.
Thanks,
Karan

hi,
Process goes like this.
1. Run Prepare.Complete all the 11 steps successfully.
2. Then run the SAPUP tool. Follow the onscreen instructions.
3.During the EU_IMPORT phase select the number of hours according to the size of your database
4. System stops at ACT_700 phase.
5. Complete the modification adjustments for SPDD.
6. Carry the adjustments in the form of a change request.
7. Follow the steps mentioned above for SPDD and SPAU.
8. Continue till MODPROF_TRANS phase after which your Shadow instance will take over the Original Instance.
9. Before starting with MODPROF_TRANS take a complete backup of the database, kernel and the upgrade directory.
10. Start with the upgrade. You will have 14 days after upgrade for SPAU.
11. Complete the upgrade.
12. Complete the SPAU modifications.
For further questions refer
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/erp2005+upgrade&
Dont forget to reward points
Regards,
Suhas

Similar Messages

[Forum FAQ]Tips on Upgrading Windows 10 Technical Preview from Build 9841 to 9860

The new Build 9860 for Windows 10 Technical Preview has been released recently. Here, I would like to share some experience on upgrading Windows 10 Technical Preview from Build 9841 to 9860.
Tip 1: How to use Refresh option to upgrade.
Scenario
In order to upgrade to Build 9860, the new preview build should be downloaded firstly:
PC settings-> Upgrade and recovery->
Preview builds, which is as shown below.
If there are multiples PCs which are running Windows 10 Technical Preview Build 9841 need to be upgraded, you may just want to use one copy of downloaded preview build to upgrade all of them instead of downloading the new build on each PC.
Solution
If you have upgraded one PC from Windows 10 Technical Preview Build 9841 to 9860, the downloaded preview build (install.esd) can be used to upgrade other PCs. Here we can use install.esd to export the install.wim, then this intall.wim can be used as a recovery
image.
Step 1: Understand the basic information about install.esd.
Install.esd file is located at C:\ $WINDOWS.~BT\sources folder at first. When the upgrade is finished, it would be copied to
C:\RecoveryImage folder. Here is the information in setupact.log which contains information about setup actions during installation:
2014-10-28 19:03:38, Info SP Moving file D:\$Windows.~BT\Sources\Install.esd to D:\RecoveryImage\Install.esd
What’s more, the command Dism /Get-Wiminfo /Wimfile:<path_to_install.esd> is used to display the information about the file install.esd:
Step 2: Export the file install.wim.
The following command is used to export Windows 10 Technical Preview Build 9860 image:
Dism /Export-Image /SourceImageFile:<path_to_install.esd>
/SourceIndex:4 /DestinationImageFile:<path_to_install.wim> /Compress:recovery
Step 3: Copy exported install.wim to other Windows 10 Technical Preview Build 9841 computers, and set the recovery image.
For example, the install.wim has been copied to C:\image folder, the following command is used to set the recovery image:
Reagentc /setosimage /path C:\image /index 1 /target C:\Windows.
Step 4: Use Refresh option to upgrade your PC.
Go to
Update and recovery setting under PC settings, choose
Refresh your PC without affecting your files:
Note:
Applications needed to be reinstalled.
System would use the exported install.wim to refresh Windows 10 Technical Preview from Build 9841 to 9860:
Note: If you use install.esd to refresh directly, just need point the index location as 4:
Reagentc /setosimage /path C:\image /index 4 /target C:\Windows. However, install.wim is easier for deployment, such as creating bootable USB, WDS and SCCM deployment.
Tip 2: Workground to upgrade native boot VHD.
Scenario
Many users use the method native boot into VHD to test Windows 10 Technical Preview. However, there is a limitation on native boot when using VHDs:
If you boot from a VHD, you cannot upgrade the Windows version in the VHD to a newer version. This article describes how to upgrade VHD system Windows 10 Technical Preview from Build 9841 to 9860.
Solution
Step 1: Upgrade in Hyper-V.
Use Hyper-v to create a new virtual machine, and use your native boot VHD
as an existing virtual hard disk:
If booting from this virtual disk directly, it would fail to start due to lacking of boot files. You can use Windows 10 Technical Preview Build 9841 ISO file to repair the startup issue:
You can boot intosystem successfully in Hyper-v, then the upgrade process would be supported.
Step 2: Create Native Boot to VHD.
When the upgrade is finished, shut down the virtual machine, use the same way to create Native Boot to VHD:
Mount the 9860 native boot VHD file.
Use the following command to create boot entry for VHD system: Bcdboot
v:\windows (v: represents the mounted virtual disk drive letter).
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi Arman mohseni,
From my observation, if I click download now, it would create a BITS task:
We can use following command to check:
Import-module bitstransfer
Get-bitstransfer –allusers
From the output, we can see the system account created a BITS job for transferring, under the C:\Windows\Software Distribution\download, we can get the temporary downloaded file, which is approximately about 2.5G.
After we restart, and go to C:\Windows\Software Distribution\download, the temporary file is gone.
If I click the download again, the BITS would create a new task, a new temporary file, if we compare the JobIds of the two times downloading, they are totally different.
On the other hand, if we download a windows update, the JobId would be kept, and the temporary files would be kept, too.
Alex Zhao
TechNet Community Support

Recent software upgrade has changed the way my iPhone syncs with my macbook, and diary items no longer upload from my iPhone. I've tried a to fix it and seem to have made things worse. What is the best way to get the two devices in sync ?

Recent software upgrades has changed the way my iPhone syncs with my macbook and items entered on my iPhone are no longer uploaded to my macbook. I've tried to fix it and seem to have made things worse, my iPhone now has a long list of calanders that I don't want and can't delete and nothing is uploading to my macbook.

You need to look at Mac's iTunes, check  > System Preferences > iCloud.
If you use iCloud for Calendar, Contacts then turn off those items in iTunes, Info tab with your iPhone connected and selected.

In new upgrade is there a way to get pics back on caller id

In the new upgrade is there a way to get pics back on the caller ID when people call you or when you call our rather than just a plain black screen?

No, it's a design change with 7.1 and - like it or not, it is what it is. I preferred the old design as well.

Where to find the documentation for technical wage types?

Gurus,
I need help finding the documentation for technical wage types such as /001...
There are hundreds of them...
Thanks,

you can go to the view v_512w_d, choose your country grouping, the list of wagetypes will be displayed.
there will be a help button available next to the wagetype name.
you can view documentation either for technical or modal wagetypes.
Have a good day!

I have lost all artwork since the recent upgrade, is there a way to refresh the 160gb classic ?

I have lost all artwork since the recent upgrade, is there a way to refresh the 160gb classic ?

You'll have to restore the iPod to factory settings. Then sync all your content from your iTunes library back over to it.
B-rock

Need R12 upgrade documens for technical development prospective

Looking for 11i to R12 upgrade documens for technical development prospective

Looking for 11i to R12 upgrade documens for technical development prospectivePlease also see these docs.
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
R12: How to Compile a Form in Release 12 [ID 1085928.1]
How To Bring Up 10G Forms Builder In R12 Environment? [ID 579318.1]
Running EBS R12 Oracle Reports From The OS Command Line [ID 1134993.1]
Upgrading your Customizations to Oracle E-Business Suite Release 12.1 -- White Paper [ID 1435894.1]
Preparing Custom Development for Next Oracle E-Business Suite Release [ID 374398.1]
Customizing Translation in Oracle E-Business Suite - R12 [ID 1382124.1]
Thanks,
Hussein

If you lose your ipad2 and it is dead is there any technical way to track or find it?

If you lose your Ipad2 is the any technical way to track it down or to find it?

If you have set up find my iPhone and enabled find my iPad, there is a way to do so. I don't know about fmi on Mac but if you have another iDevice with find my iPhone installed with the same apple id, you can track the iPad if it has an Internet connection

Health Report for existing role in support and upgrade documentation

Hi Experts,
I am looking for create a report or using existing report/FM (if any) which will show new objects been thrown for a role with there SAP suggested values when we use PFCG expert mode merge option. I think this will be very helpful for support person to health check for roles and during upgrade in step 2C documentation people can save a hell lot of time. I do not have ABAP knowledge. Can anyone help me on this?
Regards,
Arpan Paik

Hi Julius,
I have been to that wiki before and one by you as well (regarding upgrade steps). For current upgrade I have also noticed that SU25 step2B is not only left with customer related changes only. Where USOBT_C/USOBX_C has same values as of USOBT/USOBX there update to customer table automatically happened in step2A. So 2B left with very less changes where customer prefer the standard way!!!
What I am looking for is actual authorization change delta. Step2C gives us only list of roles get affected. I am lookimg for what change actually can happen to a single piece of role due to upgrade.
I have followed below method.
1. Join table USOBT_CD and USOBT_C to see actual proposal for changed transaction and corresponding auth object. Here I had to perform few excel work to remove data repetation
2. Then take old data for roles from AGR_1251
3. Put together above 2 data and after proper sorting by object manually remove the data which SAP does by expert mode merge function.
Can this step be automated by some ABAP code? or function module?
Otto wrote :
If I start/ when I start and still remember this thread, I will update it
Please do so and thanks for sharing thoughts.
Regards,
Arpan Paik

Upgrade Documentation 10.7SC - Rel 11

Can anyone tell me where I can find the documentation for upgrading Oracle Apps 10.7
to 11.03.
I have been unable to find any in the Oracle
Website. Are there any books out there for this topic?
Thanks.

If you go to the Solaris 11 site on the Oracle Technical Network, you will see in the documentation tab a link at the top called
"Transitioning From Oracle Solaris 10 to Oracle Solaris 11" :
http://download.oracle.com/docs/cd/E23824_01/html/E24456/index.html
I'm not sure how you could have missed it.
-- Alan

I have an ipad 2 and just upgraded to IOS 8 I have never back up my photos and I lost all of them after upgrade is there a way to retrieve all the photos I lost?

I Have an ipad 2. I have never back up my photos ever since setting it up or ever since I bought it. Wiith all the previous upgrades that I have I never lost any photos and videos taken from the ipad itself. Now I upgraded to the new IOS 8 and all my photos and videos are all gone. Is there a way to retrieve the lost photos and videos?

Did you have I cloud that automatically back up you data to iCloud backup happens when you charge your iPad Have a look in Settings iCloud backup If you do then all your photos will be safe When you have iCloud if you buy a new iPhone / iPad And you use the same Apple ID all your Apps & photos will download to your new Device Cheers Brian

Upgrade to os4 - A way to get lost information - CONTACTS and TEXTS

I have been spending hours, and hours, trying to figure out what happened to this phone. I upgraded to os4, and when I did, I lost everything (contacts, texts, pics, apps, etc.), eventhough I backed up everything on a weekly basis. Not sure where Apple dropped the ball on this major issue. I have been looking for hours to find a fix. I came across a post that was helpful in finding a way to solve some of my problems, including FINDING MY LOST CONTACTS! I have to manually enter them into my phone again, but at least I have them! Like, me I am sure many of you don't memorize phone numbers anymore. I have just added to a post I found by Somebody2 on another forum (http://discussions.apple.com/message.jspa?messageID=11831613), as a starter, and added to it, to give more specific directions. I am extremely thankful; to have found this! I am still looking to find a way to get back my lost pictures, but that may be a lost cause. Hopefully this can help some of you out there, like it did me(....sigh of relief). Anyway, here is a way to find those lost contacts and texts:
Here are the main steps, assuming that you did backup your iPhone using iTunes recently:
1. Use the following tutorial to install FireFox with SQLite Manager add-in and point it to your backup folder:
http://www.skyontech.com/blog/iPhone-app-data-access
(**when following these directions, make a copy of the backup folder, and paste it on your desktop to make the overall process a little easier)
**2. Once you have opened SQLite, Click on the options (hammer/screwdriver icon) at the top. Change the "Default file extension for SQLite files" to mddata then click OK. Next, Click on the word "Directory" at the top, just under the menu bar. Then select choose "Select default directory". Choose the most recent folder inside the backup folder you copied to the desktop, then click OK.
**3. Now the more time consuming part (took me at least 30 minutes). Beside the word "Directory" you can now choose files from a drop down menu. The easiest way I found to do this is to click on the 1st one, then click go. You can continue down the list using the arrow key, and click go each time you go to a new file... As you do this, you will see the left side change. Sometime it has nothing (No directory found), and other times there is a list of menus (master table, tables, views, indexes, triggers). I found mine in the 38...range out of the hundreds of files.
**4. Continue to go through the files until you see "ABGroup" under the tables menu as an options (it does not show up under the "master table" menu, just under "tables").
5. Once you have found "ABGroup", Click on the "Execute SQL" tab in the SQLite Manager and copy/paste the following:
====================
SELECT First, Last, Organization, Note, value as Phone FROM ABPerson, ABMultiValue WHERE ABMultiValue.property=3 AND ROWID=record_id ORDER BY First
====================
Then click "Run SQL" button.
You should now see the list of all contacts backed up from your iPhone. You can also highlight all rows with the mouse and the SHIFT key, then right-click and select "Copy Rows as CSV for Excel", then paste them to Excel so that you can print your contacts spreadsheet.
NOTE: You can do the same thing for finding text messages. The only difference, is that you want to look for the word "message" under the tables menu instead of abgroup.
I have never posted here, but this was a HUGE help to me, so I thought I would try to share a more detailed way to get these back. I know it's not easy, but IT WORKS!! I am so relieved, and thanks a lot Somebody2!!!!
If anyone knows how to recover lost pictures, even if it is a process like this, please, please, please post it.

oops...ouch...hard way to learn to always back up your stuff
you "never" backed anything up?? not even an old backup someplace? you really don't have to answer...i'm just feeling your pain. difficult.

Post upgrade problem activating technical chains

Hi
After upgrade do version 7.01 I would like to collect and activate technical process chains.
During this proces I got error "Shadow object 0PAK_...... cannot be expanded; chain is inconsistant" and not all Infopackages were collected.
Any sugestion what is cause of this problem.
Adam
THX

Hi Dhanya,
Thanks for your reply.
When activating the process chain, I have selected all infopackages that were collected automatically by the system (with the option "In the Data Flow Before"). I also tried to find these infopackages myself in the Business Content (in ISIP (Infopackage) object type), still no success.
I also thought I could create these infopackages manually, but I have absolutely no idea on what they are expected to do: loading? From where to where? Activating data? Changing attributes? I don't know.
In RSPC I can see these infopackages as a step in the chain, but only with their technical name which does not help me to find out what is the source and target of that loading.
Cheers,
Csaba

Hard drive upgrade, how? Best way?

I'm interested in upgrading my internal hard drive on my MacBook.
I made the mistake of only getting the 120 hard drive, not taking into account the fact that I would have a chunk of that allocated to the Windows machine that is created by Parallels.
So, I would like to go to a 200 or 250GB hard drive now. The issue that concerns me is how to go about doing the actual change over without loosing anything on my current one, as well as how I would go about transferring Parallels?
I do have 250GB external hard drive, so I can transfer all of what I have on the current internal to that. I'm wondering if there is a way to do the thing that I did when I first got this one, which is transfer ALL of my settings (system settings and all) and files from the old computer to this one.
Can I do this with a new hard drive?
Would I need to reinstall and start over with parallels or would I be able to transfer that onto the hard drive?

Hi,
I would use something like SuperDuper or Carbon Copy Cloner and make a full bootable backup of the internal HD to your external HD.
Be aware that this will delete everything that is now on the external HD.
For safety reboot your Mac while holding down the Option/alt-key and choose the external to boot from.
Verify that everything is okay and if so replace the internal HD with the new one.
Again boot from the external HD and run SD or CCC again to copy all from the external to the internal HD.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.bombich.com/software/ccc.html
Have Fun
Stefan

10.1.0.4 upgrade documentation question

Hi:
In the accompanying documentation (section 5.1.7) it says, "If any database uses Java Virtual Machine or Oracle interMedia, then install the Oracle Database 10g Products installation type from the ... Companion CD before installing the 10.1.0.4 patch".
What does that mean? What is the "installation type"? I assume since I already have the interMedia stuff running on a 10.x.x. database I have already loaded whatever I need from the companion CD. Is this saying to do any upgrades from the 10.1.0.4 companion CD section before applying the database patches or what?
Thanks.
MJG

Here's what I did. (Windows XP server)
* Installed Oracle 10.1.0.2
* Installed 10.1.0.2. Companion CD
* Installed "10g Products" from the 10.1.0.2 companion CD
* Installed 10.1.0.4 DB patch
* Installed 10.1.0.4 Companion CD patch.
Now I am in the "post processing" phase, trying to do a
STARTUP UPGRADE
but I get an error "SP2-0714: invalid combination of STARTUP options"
Does anyone know what's behind this? Did I need to run the catpatch.sql before installing the companion CD parts of the 10.1.0.4 patch?

Upgrade Documentation in Technical Way

Similar Messages

Maybe you are looking for