UPGRADE ECC 6.0 with AFS 6.3 from R/3 4.7
We are now preparing the upgrade of our R/3 server to ECC 6.0 with
AFS . As per the plan and SAP guide for upgrade we started the prepare
phase with upgrade master for ERP 6.0 . But in the initial stage i saw
the page of prepare it showing all the induatry specific components
like ECC DIMP ,IS_OIL etc . But we want to use AFS 6.3 . So if i
continue the installation all the industry specific addon installed .
So why because of the conflict iam should not apply AFS into our
server .
So kindly tell me how can i remove ECC DIMP like industry components
from the prepare phase .
good
Similar Messages
-
Upgrade CS4 to CS5 with invalid serial number from pc to mac
I bought CS4 from a registered reseller a while ago, but now when I try to register the download, it says the serial number is invalid. I am now unable to reach the reseller. I have recently moved from pc to mac and would like to purchse CS5. Is it worth trying to register the CS4 so I can qualify for the reduced rate to upgrade to CS5? Or does the change from pc to mac mean I need to purchase new software entirely and pay the full rate?
If I am right , you are planning to buy the CS5 hence the article given by Mylenium would not help as Adobe provide the platform swap for the latest version.
You have to contact Adobe ....They will check the serial number of the CS4 is valid or not....and will register for you.
Once registered you can straight away place the order for the CS5 on the discounted price for MAC , there will be no problem weather you have the cs4 for mac or win
You should be bothered for your CS4 serial number because if you buy the upgrade of CS5 , when you will install the product it is gonna ask you the cs4 serial number .....hence get the serial number checked otherwise you have to buy the new software entirely.
Everything is dependent on CS4 serial numbr, buying CS5 is not the problem....you should have correct serial number of cs4 , get it checked. -
Hello
I recently purchased a Macbook Air with 1.7 Ghz Intel Core i5 4 gb Ram 11" with 128 Gb storage.
All is well but I would like to increase the storage in my Mac, to the maximum possible 512, 1 tb what ever possible.
I am in the Kingdom of Saudi Arabia right now. No Apple Stores exist here at the moment. But I have noticed several authorized resellers.
Kindly guide me if, first of all this is possible or not, if yes then how can I go about doing this being in the country (Jeddah, Saudi Arabia) that I am.
I also want to purchase an iMac, but the local shops don't seem to have stock and would like to inquire if I could order it online and have it delivered to my home/office here.
Thank you for your time.
AbdullahYou should go back to your Apple Reatiler Store since it is likely under warranty.
If'its not under warranty there e are a number of sites... here is one.
http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Air_2011
Personally I would sell the 128 and buy the one you need.
Cheers -
Can i upgrade my iCloud storage with itunes card ?
Can i upgrade my iCloud storage with itunes card ?
From what i understand, you want to buy more storage on iCloud using an iTunes card right?
-
To view Balance Sheets of previous period from table GLT0 in ECC 6.0 with N
How,
We are on ECC 6.0 , with New Ledger activated from FY:2009 .
Now, when we run the Transaction F.01 (Program: RFBILA00) it gives us the balance sheet figures picked
from the Table FAGLFLEXA .
It does not show us the Balance sheet figures of Balance currently in the Classic GL table GLT0 .
ie: f.01 to show report from 0L as well as GLT0 . (ie from Leading Ledger as well as Classic Ledger)
Pl.suggest ow can we view B/S of entries in Classic GL table GLT0 for previous years.
Regards,The balances in both tables should be the same, right? It is just that in FAGLFLEXA you may have some extra line items due to document splitting.
-
Upgrade from ERP 6.0 with AFS 6.0 to ERP EHP4 - AFS 6.4
Dear all,
I've upgraded our Solution Manager to latest maintenance (all latest release/all latest Sp/all Oss notes)
I 'm unable to have a queue with EHP4 - Afs 6.4 from Solution Manager
If I define a system as SAP ERP 6 with Afs, the sol. man. give me the option to upgrade to EHP4 but 'forget' AFS 6.4.
If I define a system as Afs Server 6, the sol. man doesn't show me the option to upgrade to EHP4.
Any Idea to exit from this stall condition ?
If I choose the option SAP ERP 6.0 to upgrade to EHP4, SAPHEPI will ask me the AFS upgrade CD and all AFS Sp ?
My target is:
- ERP 6.0 SPS 16 with AFS SP8 + ERP 6 EHP4 SPS 4 with AFS 6.4 SP 2, the max possibile now.
Thanks tho who will try to help me.
RegardsHi Reena
Yes, you can upgrade the system to ECC 6 EHP 6 or 7,
before that is any other SAP system are connected to ECC6 ?
If it is yes, Kindly refer the SAP Note, & you require to check those SAP version are supported to ECC 6 EHP 7 ?
1388258 - Version Interoperability within the SAP Business Suite
BR
SS -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
CA-JVA on the upgrade 46C to ECC 6.0 (with HR module)
Hi experts,
We have now finished the upgarde but ne things make me feel not good:
In SAP Note 316815 - CA-JVA: Upgr. R/3 Enterprise / ECC- data transfer AFVC->AFVU
I think the transfer of those tables has not been worked fine.
And it seems that the implementation of this note does not woks at all. I mean to transfer of the Tables (AFVC to AFVU and VSAFVC_CN to VSAFVU_CN) before the upgrade and transfer them back after the upgrade.
Currently we have now both systems running: The Source system (the production system where the data comes from with release 4.6C) and the pilot system which has been upgraded in release ECC 6.0 (with source system data).
Is there any possibily to recover this step without to repeat the all upgrade (after a DB copy of course)?
Maybe export those tables?
Thanks in advance
HanseAtikI have to close it.. without answer from anyone...
-
What are the major differences b/w R/3 4.7 and ECC 6.0 with SAP BW/BI
Hi,
Any one can give an idea about the conversions from SAP R/3 to ECC 6.0 with respective of SAP BI/BW.
what are the major differences loading the data,delta methods,enhancements,lo's,FI-SL,CO-PA etc.....
if any one have documents and links please can you share it is very usefull for my client.
with out knowing i don't want to go forward,i don't misguide my client.
actually i am working as sap bw/bi consultant,my client is going to upgrade the R/3 4.7 to ECC6.0 and BW 3.5 to BI 7.0.can you help me or guide me .
Thanks in advance.
SAP Member......Check
http://service.sap.com/releasenotes
http://erp.fmpmedia.com/
Markus -
Error in Upgrading ECC 6.0 to EHP4
Hi sap gurus,
Am upgrading ECC 6.0 to EHP4. now am in configuration phase. in the EHP_INCLUSION phase am getting a error:
" Severe error(s) occured in phase PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION!
Last error code set: Stack inclusion failed: patch level 53 for component EA-HR is too low, destination level is already at 55"
Then i downloaded the required patches of patch level service pack 56-61 and continued, but getting the same error..after that i checked the current status of the server. its having EA-HR component till service pack 55. but when i checked the stack XML file, its showing only EA-HR component SP02 to SP53. i think this error is due to the mismatch in stack XML file. i dono what should i do for this. should i need to alter the stack XML file manually? Please help me guys. my upgradation is hanging. please help me guys.
Thanks and regards,
Santhosh Kumar.it is fine to assume that the stack file is mismatched with the system as the file suggested the ehpi to patch until level 53 but the original system already up to 55. if you are set on editing the xml file and this is not for production, you could try to remove the HR part entirely, just use find and try to remove all of that content that related to HR, be careful with the tag. just delete <software-component> until </software-component> for the HR part, remember to backup original file. it will avoid the error. Since the xml suggested 53 and the system already at 55 and assuming all other components correctly defined in the stack, i think it is fine to continue, and if i'm not mistaken after calculation with stack file, ehpi will offer to add support package level manually, you can add HR level until 61 or just leave it at 55 and add manually with spam later.
if this is for production system, i think you should go with AC suggestion, just find whats wrong with solman and reinstall using the right xml file.
Edited by: Henry Hsu on Oct 26, 2010 4:40 AM
Edited by: Henry Hsu on Oct 26, 2010 4:54 AM -
Error AFAB after upgrade ECC 6
Dear All,
My company just upgrade ECC 6, but when I test it with AFAB,
test run
System gives message:
T E S T R U N was terminated Refer to the error log
No documents were created in this run
Error Log:
Number range 30 has not been created for document type AF.
Message no. AA738
Diagnosis
No valid number range interval has been created for document type AF.
Procedure
Specify an interval for number range 30 in the year 999 for company code .
Please help me.
Thanks
OcepHi,
Kindly check in transaction FBN1 for Company code and number range 30 whether external number flag tick is marked or not. If it is marked , remove the same.
In ECC 6 above mentioned tick for external number flag is not required.
and later maintain number ranges for current period.
Hope this help you.
Regards, -
IS-Retails on ECC 6.0 with ehp4
HI,
I am looking to install IS-Retails on ECC 6.0 with ehp4
Can any one guide me exact location to find the component and also installation procedure.Thanks
Best Regards
NarendarHello,
Goto Service Market place and goto download page. Then click on Search for Installations and Upgrades under Installations and Upgrades.
In the search tab fill with EA-RET.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
In the above link check under Logistics-general for more details for IS-Retail.
Regards,
Yoganand.V -
ECC 6.0 with NetWeaver Ehp 1 without Ehp 4
Hello
Is this combination possible?
ECC 6.0 with NetWeaver Ehp 1 without Ehp 4
Thank you very much!That combination is not possible. The information below is taken from http://www.sdn.sap.com/irj/sdn/nw-70ehp1.
Regards,
John
What is the implementation strategy for SAP Business Suite?
With the unrestricted shipment of enhancement package 1 for SAP NetWeaver 7.0, only implementations within standalone installations of SAP NetWeaver 7.0 are supported (e.g. for BI, EP, etc.).
For existing installations of SAP Business Suite systems (i.e. SAP ERP 6.0, SAP CRM/SRM/PLM, ...) etc.) that are based on SAP NetWeaver 7.0, the SAP enhancement package 1 for SAP NetWeaver 7.0 shall not be installed separately, as it will result in malfunctioning of the installation procedure and/or the final system state.
Business Suite 7 (generally available since May 5th, 2009) is technically based on the SAP enhancement package 1 for SAP NetWeaver 7.0. All relevant parts of enhancement package 1 for SAP NetWeaver 7.0 are included in the respective SAP Business Suite 7 installation routines and will be installed automatically underneath the SAP Business Suite systems when an upgrade to SAP Business Suite 7 is performed. More information is available in this overview presentation, more details can be found at the service marketplace quick- link /ERP-EHP (SMP login required).
General note on the relation of enhancement packages for SAP Busiess Suite and SAP NetWeaver:
Customers who have implemented certain enhancement packages for SAP Business Suite might have to implement a certain enhancement package for SAP NetWeaver 7.0 as well. Please refer to the respective documentation of the SAP Business Suite for details. -
Patches apply on ECC 6 AND WITH AIX
Dear ALL,
I want to patches apply on ECC 6 AND WITH AIX. can me tell me the all the process step by step.
Rrgards,
AshutoshHello,
Goto Service Market place and goto download page. Then click on Search for Installations and Upgrades under Installations and Upgrades.
In the search tab fill with EA-RET.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
In the above link check under Logistics-general for more details for IS-Retail.
Regards,
Yoganand.V -
Difference between J_3AMADKA and MBEW / Update SKU standard prices with AFS
Dear reader,
Environement: ECC 6 with AFS 6.3
In a first step,I am trying to create, and in a second step, to update the SKU standard prices using FM: BAPI_MATERIAL_SAVEDATA.
It is really strange the way it performs changes on table MBEW and J_3AMADKA.
Can anyone explain to me the different use of those two tables? I thought that the J_3AMADKA was dedicated to SKU level, but finally, the TA: /n/afs/conv1 create the SKU standard prices only in MBEW !? But BAPI_MATERIAL_SAVEDATA.
just create ONE entree in MBEW (?!?) while all SKU entree but without prices in J_3AMADKA.
In FM: BAPI_MATERIAL_SAVEDATA., I mainly filled structure VALUATIONDATA (=> MBEW) and SKU_PLANTDATA_VALUATION, where surprisingly, there is no standard price field for the SKU !?
Any link or remarks about this topice will be most apprecitaed,
Thanks,
DanielHi Kalias,
Many thanks for your fats reply.
I had a look to the (really old) SAP notes and after some few researches, it seems that AFS 6.3 insert the PRICE and ZKPRS columns again into table J_3AMADKA.
Those columns are even populated with values So it means that they are required by some SAP standard programms.
Maybe you have another clue about this topic?
Thanks again for your help,
Daniel
Maybe you are looking for
-
ESI calculation for employee leaving on a mid of month
Hi, Employee left org on 12 th of month. When i am calculating ESI it deducted on the basis of Actual ESI i mean Gross of full month, though it should be on gross of only those days when employee served the orgnisation, for 12 days in my case. I mad
-
Importing from iMovie 11: Unexpected Error - "not a movie"
Hi, I was creating and cutting my videos from my last vacation in iMovie and wanted to export it to iDVD. It worked for the first project just fine, but get an error message for the next iMovie project: "Unexpected Error" and "This is not a movie" I
-
Can not open camera raw from 70d to adobe photoshop cc
can not open camera raw from 70d to adobe photoshop cc
-
Hello: I have installed Itunes on my new Windows 7 based computer (64 bit) and get the following error message everytime the program opens, "ITunes not properly installed. If you wish to import or burn CD's, you must reinstall ITunes." So, I have r
-
Unequal height in BOX in SAP Script??
Hi Experts, In the SAP Script, am defining a BOX with the below code, /: POSITION WINDOW /: POSITION XORIGIN '-0.5' CH YORIGIN '-0.25' LN /: SIZE WIDTH '+0.4' CH HEIGHT +2 LN /:BOX FRAME 10 TW /:BOX HEIGHT '1.7' LN INTENSITY 20 WINDOW size is, left: