Upgrade Enterprise portal to EHP1

Hello All,
We are having an Enterprise portal on SP19.
We are now planning to upgrade to EHP1.
Can you please help me where to start.What is the guide that I should refer to EHP1 for portal?
Rohit

Please go through the installion guide of Netweaver 7 in service market place.
goto https://websmp205.sap-ag.de/instguides then click on Netweaver 2004s that is netweaver 7.
you shall find the EHP master guide here on the right of the page.
thanks
Rishi Abrol

Similar Messages

  • Upgrade Enterprise Portal from EHP1 SP5 to EHP2 SP7

    How do we upgrade from  EHP1 SP5 to EHP2 SP7 ?
    Can we do that directly from JSPM or i should go with ehpi ?
    Just download all the files of EHP2 SP7 to EPS/in directlry and start JSPM ?
    or
    Upgrade EHP1 to SP5 then run PREPARE tasks from the DVD's then apply the SP's.
    Let me know your thoughts.
    Thanks

    Hi Markus,
    I've upgraded Standalone JAVA stack from EHP1 -> EHP2 and basically, what EHPI did was just call up JSPM and perform the upgrade. Therefore, is feasible to upgrade standalone JAVA system via JSPM, of cos generate XML with MOPZ.
    also, from sap note 1472520:
    8. Question: Can I use JSPM for applying EHPs on JAVA only systems?
    Answer:
    Yes. On Java standalone systems it makes more sense using JSPM as a standalone tool using 'support package stack' option instead of running EHPI. Whereas on dual stack (ABAP + Java systems) you have to use EHPI with the exception of Solution Manager systems (see SAP note 1245473 for SolMan EHP installations).
    Cheers,
    Nicholas Chang

  • SAP Netweaver 7.01 to 7.3 Upgrade (Enterprise Portal)

    Hi,
    I'm just trying to upgrade to Netweaver 730 from 701 (Enterprise Portal).
    At the start of the upgrade program "startup" from the Upgrade Master DVD I get the following error:
    as-sap-t43:tp3adm 47> ./STARTUP
    Checking if C++ runtime is installed ...
    Running MIDBOOT to unpack and startup...
    Determined SAP system ID as 'TP3'
    Starting upgrade to SAP systems based on SAP Netweaver 7.30
    Using upgrade directory /usr/sap/TP3/upg
    Locating SAPCAR
    ERROR: Data unit with attributes 'type=SAPCAR;osname=LINUX_PPC64' not found.
    Unfortunately I could find nothing about this error in the marketpplace or in the SDN.
    Can someone help me???
    Sincerely
    Norbert

    Hi,
    Could you please check if SAPCAR is there in kernel directory ?
    Thanks
    Sunny

  • I am upgrading it to Enterprise Portal 6.0 Service Pack 22.

    Hi,
    I need to upgrade Enterprise Portal 6.0 Service Pack 09.
    I am upgrading it to Enterprise Portal 6.0 Service Pack 22.
    I am writting the download files names:
    1> WebAS 6.40 SP22(Part 2/4): SAPInst Control File for Oracl--> CTRLORA22_0-20000118.SAR.
    2> EP 60 SP22 SAPInst Control File: EP6CTRL22_0-10002786.SAR.
    3> EP 6.0 Tools SP22--> EP6TOOLS22_0-20000394.SAR.
    4> WebAS 6.40 SP22(Part 4/4): OS Indep. Parts of Java Runtime--> J2EERT22_0-10001982.SAR.
    5> WebAS 6.40 SP22(Part 1/4): SAPINST22_0-20000118.SAR.
    6> EP 60 SP22 SAP Installer: SAPINST22_0-20000394.SAR.
    7> TREX 6.1 REV34--> TREX61_34-10002767.SAR.
    8> KMC NW04 SP22--> EP6KMC22_0-10002972.SAR.
    9> WebAS 6.40 SP22(Part 2/4): SAPInst Control File for SAPDB.
    10> WebAS 6.40 SP22(Part 2/4): SAPInst Control File for MSS.
    11> WebAS 6.40 SP22(Part 2/4): SAPInst Control File for DB6.
    12> WebAS 6.40 SP22(Part 2/4): SAPInst Control File for DB4.
    13> WebAS 6.40 SP22(Part 2/4): SAPInst Control File for DB2.
    I have Oracle 9i as Database. So, I will not use Control Files for SAPDB, MSS, DB6, DB4 and DB2.
    I am installing other upgrades files but I need to know the sequence when installing the upgrades.
    Regards
    Kaushik Banerjee

    I am closing it.

  • Error after upgrading to NW7.3 SPS5 (Enterprise Portal)

    Dear Experts,
    Could you please help with my problem ?
    I've just upgraded our Portal (NW 7.01 SPS6) to NW 7.3 SPS5. It seemed to complete successfully. And the system was restarted successfully with greenlight.
    I could log on to the start page with no problem  - http://en-adldbp-01:50000/startPage.
    But when I clicked on the "SAP NWA" or "System Information" links, then they came with "Internal Server Error 500" and "Details: WebApplicationException log ID is [C0000A40607900440000000400001AF0]."
    Would you please advise how to troubleshoot it from here ?
    Many thanks
    dan

    Hi Nicholas,
    Yes, we are using JVM 6.1.037.
    However, there is no other version of JVM available in our system. And, note #1579119 is not yet released by SAP.
    Hi Vasanth,
    Thanks for the suggestion.
    I drilled down to the Security/Configurations/Ticket level, there was no such key "template=spnego" in our system.
    Have you any other recommendation ?
    Many thanks
    dang

  • Double stack BI and Enterprise portal for SSO

    I am in the process of configuring a double stack BI and SAP Enterprise Portal. Both systems are residing on different domains. We want to utilize the standalone SAP Enterprise Portal for our BEx etc. For that I have exchanged certificates between the ABAP and the SAP Enterprise Portal systems and with the help of Support desk tool I have overcome the certificate issues. The RFC connection from ABAP and SAP Enterprise Portal works fine. The Support desk tool is complaining now about the prefix of these two servers. Also when I check the connection testing between these two systems all the messages are correct except for WEBAS connection it complains about the ping service which is already active on ABAP side. For Connectors it complains about SSO which is not detected/complained by the Support desk tool (0.426). I need your advice:
    1. Either uninstall the JAVA instance of BI or
    2. Make a Federated Portal network by making the BI JAVA as PRODUCER and the SAP standalone as CONSUMER.
    The Support package levels are the same as EHP1 SP 7 of both the double stack BI and the standalone Enterprise Portal systems. The source of users are both local to the systems.

    answered

  • Error while trying to apply SP20 to Enterprise Portal 6.0

    I am trying to upgrade my Enterprise Portal from SP13 to SP20, I am getting the following error message on one of the last steps.
    Start updating EAR file...
    start-up mode is lazy
    EAR file updated successfully for 3420ms.
    Start updating...
    EAR file uploaded to server for 10501ms.
    ERROR: Not updated. Deploy Service returned ERROR:
    java.rmi.RemoteException: Only Administrators have the right to perform
    this operation.
    at com.sap.engine.services.deploy.server.DeployServiceImpl.update
    (DeployServiceImpl.java:656)
    I also noticed that I cannot log on to the Visual Admin, I am getting the following error
    Error while connecting
    com.sap.engine.services.jmx.exception.JmxSecurityException: Caller
    Guest not authorized, only role administrators is allowed to access JMX
    Does anyone know what is causing this error?
    Thanks,
    Alma C.

    Hi Alma,
    This is one of the security issue.We had faced it sometime back.We searched some CSN's and found a solution.
    Go to Service Market palce and download the latest Cryptographic Tool kit (Service Market place---->software downloads)
    You will get a sca/sda something like tc/iaik./security(something like this)
    Deploy this on to your instance using your SDM.
    After that,Restart the Portal patching.It will go fine.
    reward points if helpful................

  • How insert Enterprise portal in Solution Manager

    Hi guys,
    Can anyone explane me how can I insert an enterprise portal in Solution Manager?
    I have execute this steps:
    - transaction smsy
    - landscape components -> Systems -> Create New System With Assistant
    - Choose SAP Enterprise portal
    After that I can see the Entreprise portal in smsy but I haven't inserted the ip of EP.
    How can connect the E.P. with my solution manager?
    I would  configure the "System Monitoring" scenario for EP..
    Thank in advance for help.
    best regards
    giovanni

    does this actually work out?
    To have SolMan 7.0 EHp1 installed and than to install SAP EPC on top of this?
    SAP EPC is based on NW, so is SolMan 7.0. But according to the SolMan 7.0 Master Guide EPC/EP is not listed as a available Usage Type
    Nesimi

  • Upgrade tool for technical upgrade of portal

    Hi,
    For upgrading SAP Enterprise Portal 6.0 SP 2 to the latest version of Enterprise Portal (7.0 or 7.1), is there any upgrade tool from SAP that can be used?
    An early response would be greatly appreciated.
    Thanks.

    Hi,
    Check SAP note 1245473 and 1175848...
    Thanks
    sunny

  • BI 7.0 Web Report and Enterprise Portal

    Hi,
    We have recently performed technical upgrade to BI 7.0
    Now we would like to migrate web reports to NW2004s functionality. Is it necessary to configure inbuilt BI Portal before we can use web reports?
    Best Regards,
    UR

    Hi,
    take a look at this note which describes how to setup BEx Web in SAP NetWeaver 2004s. All required steps are mentioned. Additionally, this note contains a checklist to check the installation and configuration.
    SAP NetWeaver 2004s: Setting Up BEx Web
    SAP Note Number: [917950 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393137393530%7d]
    In SAP NetWeaver 2004s, load is moved from AS-ABAP (BI-ABAP) to AS-Java (BI-Java). BI generates load on Portal (AS-Java), therefore BI users generate more load on Portal than normal Enterprise Portal users. See note 927530 for additional information about BI-Java sizing.
    Which functionalities of BEx Web in SAP NetWeaver 2004s are requiring a Portal?
    - New BEx Web Application Designer (Unicode, Command Wizard, ...)
    - Exporting to PDF and Printing
    - Integrated Planning
    - Drag&Drop (Analysis Web Item)
    - Web Items (Container Layout, Menu Bar, Tab Pages, Button Group, ...)
    - Formatted Reporting with BEx Report Designer
    - Document Integration with storage in Knowledge Management
    For details, see Release Notes for Usage Type BI-Java under http://help.sap.com/saphelp_nw04s/helpdata/en/index.htm
    If you don't want to use the new BEx Web functionality, you can still use BEx Web 3.5 Runtime that is running only with Usage Type AS-ABAP.
    Take also a look:
    [Setting up BEx Web - Short Track|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e]
    Regards
    Andreas

  • How do i know what is the latest version of PeopleSoft Enterprise Portal?

    Hi,
    I would like to know what is the latest version of PeopleSoft Enterprise Portal. The problem is we want to upgrade our current Portal to the latest one.Also i want to know if the version has a Release Value Proposition.
    Thanks,
    Sriram

    Hi,
    The latest released version is Enterprise Portal 9.1.
    You can find the RVP here:
    https://blogs.oracle.com/peopletools/entry/release_value_propositions_available
    Oracle support link:
    https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=817803.1
    For the upcoming release of Enterprise Portal 9.2, find the RVP here:
    https://blogs.oracle.com/peoplesoft/entry/peoplesoft_hcm_and_fscm_9
    Oracle support link:
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=REFERENCE&id=1473726.1
    Regards,
    Wijnand
    Edited by: gritterw on 23-aug-2012 9:45

  • Enterprise Portal DC Migration Issue into 7.31

    Hi Experts,
    I have created one Enterprise Portal DC created in 7.0 into 7.31.
    After creating it is building successfully using deprecated dependencies.
    I need to resolve those dependency before deploying into 7.31 server?
    For the Enterprise Portal DC deploy option is also coming as disable.
    Am I doing correctly?
    We are using NWDS is EHP1 SP08 PAT0011 and JDK 1.6_0_30.
    Dependency:
    Need your help.
    Thanks,
    Patralekha

    Hi,
    Did you find any deprecated API in class files(*.java), It represents like below image.
    Then you have to find relevant jar and replace with a new one.
    Second option is to create new external library with required jars(Replace deprecated jars with new jars) and give reference to existing dc.
    Regards,
    Surya.

  • How to disable forward button for particular workitem in SAP Enterprise portal 7.4

    HI Experts,
    We have recently upgraded our enterprise portal to 7.4 version. We have a requirement to disable the forward option for a particular shopping cart workitem coming from SRM system.
    I searched the help document and other threads and found that the FORWARD button can be removed from iview property:" LIST OF ACTIONS TO BE EXCLUDED"  But this disables the forward button for all the other workitem type also.
    Is there any way to disable the FORWARD BUTTON ONLY FOR SHOPPING CART ITEM THROUGH XML CONFIGURATIONS?
    I have attached the screen shot. Kindly revert with your suggestions.
    Best regards,
    Rahul

    Hi Gaurav,
    In you xml file , you can check forward action in<action>..</actions> tag . Also I am assuming , the shop cart workitem uses default view , so you can check default view in your xml and remove the actions from that view. For ex:.. you can create a custom view and make your task use that view and you can remove 'forward' action from that view.
    Hope this helps !
    Thanks & Regards
    Saikrishna

  • Startup of Enterprise Portal - 2004s

    Hi,
    we did an Upgrade of our Enterprise Portal to NetWeaver 2004s SPS11. The startup of the Portal takes now more than 2 hours. The applications running on the SAP WAS are still the same as before the upgrade. We didn't deploy new applications. Are there any ideas what's the reason for this??
    Thank you in advance.
    Best Regards
    Ines

    Hi Ines,
    Can you tell us the behavior of the server during the 2hr startup?
    Is the CPU extremely busy? if so what is using the most CPU time?
    How much memory is being consumed?
    Please also examine the log file. Tell us what task it is getting to before there is a long wait during start up or is it continually writing to the logs?
    Examining these items should give us some indication where to look as what maybe the cause.
    Regards
    Dan

  • Looking for Enterprise Portal training

    I am looking for recommendations, for Portal Admin training (EP6).  We are about to upgrade from EP5 to EP6, and take on a few new projects on the new platform.  I would be interested in topics such as installation, security, deploying iviews, system configuration, user management, monitoring and tuning. 
    I am NOT looking for developer training, I am in Basis and we have other developers that will write the code.
    Thanks,
    Scott

    I am new to SAP Enterprise Portal (NetWeaver) and am looking for advice on SAP courses to take.
    I am looking to start with SAPEP (SAP NetWeaver Portal Fundamentals).  Do you know of anyone that has taken this course and could you tell me if it is beneficial to take as a preview to JA100 (SAP J2SE fundamentals)?  Can I continue with the Java courses without this class, etc?
    Is SAPEP worth the costs?
    Any advice would be much appreciated.
    Thanks in advance.
    Steve

Maybe you are looking for

  • Can't access store. So go back to v4.? but even that ain't easy.

    Given I am still unable to find the needle in the haystack that is the problem that prevents me from accessing the music store under version 6, I tried to re-install ver 4, but the library file (.itl) has been altered by the upgrade and itunes throws

  • Call Transaction 'PA40'  ALWAYS returns with error code

    Hi, I'm having issues with updating personnel actions using CALL TRANSACTION 'PA40'. The call always ends with an error code. I checked the message table and there are no error messages, only warnings and status messages. Warning and information mess

  • What happens here and how does it all work?

    ok so lets say i have 3 things running: 1 model (obejct A) 2 objects (B and C) which update model A at random intervals ok so lets say B tells A to update(params). this update takes a long time to finish, meanwhile C asks A getInfo() which returns th

  • Can't import Flip video, getting error -2000

    I'd like to view a number of videos made with a Flip Mino HD with an iPod Touch. I'm trying to convert them into iPod format using iTunes 10.0.0.68 on a Windows 7 computer. The videos are 1280x720 mp4. I can play the videos in iTunes. Altough iTunes

  • DAC Inital install Fails

    Hi I am new to BI APPS and I am having some problems doing my first Initial Import from the DAC Client. I followed all the steps in the Oracle Documention Oracle® Business Intelligence Applications Installation Guide for Informatica PowerCenter Users