Upgrade Error 1604 - Would this work to get iphone OS 3.0 running?

Last week, I tried to update my iPhone 3G with the new 3.0 OS only to get the 1604 error and what I had originally thought was a bricked iPhone. After some digging on these forums, I figured out how to revert back to the older OS. I found it on the internet, downloaded it, and then restored my iPhone using that. My question is, if I were to go about manually downloading the 3.0 OS from the internet to my computer, and then restoring my iPhone using it, would it work? My god, all I want to do is have the new OS on my iPhone! What the heck is going on?

I can send invitations and accept invitations through my Exchange Calendar, but not through my gmail CalDav?
Why would this be removed and not included? Is this feature going to be added next year and advertised as some new feature that other phones don't have, like cut and paste? My Dell PoctetPC from 2000 has cut and paste...
Come on Apple - listen to users and bring in all of the basics! You want this to be fully recognized in the Enterprise - CalDav meeting invites are going to be necessary!

Similar Messages

  • I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only with wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

    I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only to wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

    Trust me when I say this coming from 20 years of experience.
    Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
    Download and install Carbon Copy Cloner, clone internal drive to external drive.
    Set a schedule to remind you to do it at least once a week, keep it near your charger.
    When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
    CCC will do the rest.
    If you want to boot from it, hold the option/alt and select it Startup Manager.
    I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
    It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
    Make as many clones as you want, keep them time seperated, off site etc. etc.
    Cables don't have network issues, clones can be verified in seconds merely by booting from them.
    Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
    Software problem? No sweat, boot of the clone and reverse clone your problems away.
    If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
    I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
    Most commonly used backup methods

  • HT204053 My husband and I both have iPhones but we only have one iPad. We use the same apple ID because we also share the same email address. How would this work with iCloud because we don't share the same contacts?  Thanks Elainecontacts

    My husband and I both have an iPhone and we share an iPad. We also share the same email address so how would this work with iCloud because we don't share all the same contacts?
    Thanks

    An icloud account is designed to be used by one user.  That user can have all his/her devices synced with the same Apple data (email, contacts, calendars, notes, reminders, etc.) .  When two people use the same account, then problems usually occur when one user edits data that the other user doesn't want changed on their device.  You can continue sharing the same ID for the itunes account in order to share the purchased music, apps, etc.  itunes accounts and icloud accounts are different.
    It's by far better that each user has his/her own icloud account.

  • I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

  • [WS-C3850-12S-E]---[WS-C2960X-48FPD-L]---[AIR-CAP2702I-x-K9] , Would this work?

    Does the Cisco Catalyst 3850 support indirectly connected access points?
    [WS-C3850-12S-E]---[WS-C2960X-48FPD-L]---[AIR-CAP2702I-x-K9]
    Would this work in any way?

    NO it will not work. AP must be directly connected to the 3850 for it to work in MA or MC mode.
    Regards
    Dont forget to rate helpful posts

  • ERROR 1604 AGAIN! CAN'T RESTORE iPHONE, GRRRRR!

    Why is it that everytime there's a new software update for the iPhone it completely crashes my iPhone and then takes over 4 hours to get it working again? Seriously, I'm not lying, you can check my history and all the topics I've created in the past...THEY ARE ALL ABOUT THE SAME **** THING: ERROR 1604 WHILE ATTEMPTING TO RESTORE! I've deleted iTunes, re-downloaded/re-installed it, I've restarted my PC several times, I've tried using multiple USB cords, I've used all 4 USB ports on my PC...NOTHING WORKS! And now, for the first time...once it says: "preparing iPhone for restore" it makes the screen on my iPhone flash different colors like Joseph's technicolor dreamcoat, LOL! Can anyone help me get my iPhone restored and running again, PLEASE???

    Ok, so I finally took it to the Apple store and they were able to restore it within minutes without a problem. I took it home, put an ad on Craigslist, sold my 2G iPhone for $170, went to the AT&T store, bought a brand new 16GB iPhone 3G S and brought it home...AND THE SAME THING HAPPENED WHEN TRYING TO INSTALL THE LATEST SOFTWARE UPDATE! I brought it to my GF"s house and tried her laptop...IT WORKED PERFECTLY! So I guess it's my PC?

  • Error message says "This page requires a plugin that can only run in 32-bit mode"

    When I try to write an email from my BT site I get the following message
    "This page requires a plugin that can only run in 32-bit mode"
    Then there's a link to restart the page in 32-bit mode. However, it resets to whole page, drags things back out the trash.
    I have only had this problem since updating to the latest Firefox

    Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.

  • Unknown error (1604) occured when trying to get Ipod out of recovery.

    I installed the new version of Itunes yesterday, and that went fine, but when I went to restore my ipod, it sent it into recovery mode, and no matter what I do, I can't get it to come out.
    In order for the Ipod to even show that it is connected to Itunes, I need to restart my entire computer, and then plug in the USB connector.
    That works; however, when I go to restore it, I gets to the "Preparing Ipod for recovery" stage, and sits there for maybe 5 minutes, then the error window comes up, saying "an unknown error has occured" (1604)
    I have tried all the steps that has been reccomended to me by the Apple techs, and still nothing happens.
    I would greatly appreciate any help with this. :S

    Let's hope the problem is not that 'exotic', the windows world can be different sometimes, as you mentioned in an other thread
    Indeed ...
    Please feel free to leap into threads where it looks like I've missed something, Ingo. (Always a relief when I know someone's got my back.)

  • I want to try and keep my iMac cooler , would this work ..?

    My new iMac 24 inch is working fine , the only thing is its getting very hot on the casing at the top, I think this may be due to the fact it is working in a very hot room, the iMac sits on a nice and clear desk top well away from the wall , the room is well ventilated with all the windows open, but the room temperature get’s very hot and there’s no room air conditioning . I was wondering if I placed a fan on the desk top
    To blow some air onto the iMac’s case , this may help reduce the machine from getting hot ..? . Where does the iMac draw its cooling air from , the bottom or top of the casing..? and do you think that putting a fan on the desk would reduce the iMac’s
    Casing temperature in any way ..?

    Is the ambient temperature within the operating limits stated for the iMac? (Operating temperature: 50°F to 95°F - 10°C to 35°C) If so, why worry about some Heath-Robinson cooling arrangment. If the heat is being dissipated out of the iMac then it's doing the job it's designed to. 
    If you look at the iStat Pro widget:
    are there any that are actually higher than they should be. The metal case of the iMac acts as a heat-sink so it will feel warm in places whereas other computers may be far hotter inside but feel cooler to the touch.
    mrtotes

  • IPhoto upgrade/error message, solution not working. Can you help?

    I have installed iLife 06. To upgrade my photo library I got the message:
    "There is a problem accessing 1 or more files in your iPhoto Library folder. In FINDER I chose: GET INFO & changed all permissions to both READ & WRITE.
    If this doesn't solve the problem you are then supposed to go to the UTILITIES folder. I did the following: 1. Opened the TERMINAL & 2. At the prompt typed
    sudo chflags - R nouchg (this is followed with a space & using the "R" in upper case. 3. I am then prompted for a password & then in FINDER supposed to locate the iPhoto icon & drag that to the terminal.
    ISSUE: I keep getting a message saying "permission denied".
    HELP! WHAT can I do?
    G4   Mac OS X (10.4.8)   Processor: Dual 1GHz PowerpC G4 1MB L3 cache per processor. Memory: 1.75 GB DDR SDRAM

    spysmart
    I have no idea why the terminal commands didn't work, but then again, I'm no UNIX expert. But you can achieve the same thing by downloading BatchMod from
    http://macchampion.com/arbysoft/
    And apply it to the iPhoto Library Folder using the settings found here:
    http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
    (Credit to Old Toad for this one).
    Regards
    TD

  • My ipod touch 4g will not connect to tv, will not display picture. keep getting a message saying this accessory is not supported by ipod touch, what do ido to make this work and get rid of the message i keep getting?

    My ipod touch 4g 5.0.1 will not connect to tv, will not display picture. Also keep getting a message sayin this accesory is not supported with ipod touch. How do i get this to work and stop getting this message? Please help.

    - What cable re you using? Digitasl, VGA, composit, componet and who made it?
    - TV out only works with apps that support it.  It does not morror the iPod's screen
    - Have tired another TV or other display?

  • PHP Code, Variables & CSS. Would this work?

    Hello,
    I am new to PHP, this is my first script I have made without any help, I am using xammp to test my site, but the basics of the code is this. I am adding an include code into the navigation menu and in the CSS I have defined certain rules for the nav. Now in the code when you click on one of the links, it will change the variable to a corresponding number. The Code is pretty much self explanatory.
    Menu.php:
    <?
    $active = 1;
    ?>   
        <ul>
          <li><a href="#"  onclick="<? $active = 1; ?>" class="<? if ($active = 1){?>#navigation ul li a.active<? } ?>">Portfolio</a></li>
          <li><a href="#"  onclick="<? $active = 2; ?>" class="<? if ($active = 2){?>#navigation ul li a.active<? } ?>">Web Examples</a></li>
          <li><a href="#"  onclick="<? $active = 3; ?>" class="<? if ($active = 3){?>#navigation ul li a.active<? } ?>">Contact Me</a></li>
        </ul>
    Menu CSS:
    #navigation { text-align: right; font-weight: bold; text-transform: uppercase; font-size:14px; line-height:18px; height:70px;}
    #navigation ul{ list-style-type: none; }
    #navigation ul li{ display:inline; padding-left:15px; }
    #navigation ul li a{ text-decoration: none; color:#fff; }
    #navigation ul li a:hover,
    #navigation ul li a.active { color:#ffe6a5; }
    Now what I want to happen is when you click on one of the links, it will change to active, changing the color of the text to tell the visitor that, that link is active. Now normally I would do it though CSS, changing the texts rule to the active, but in order to be able to change buttons without having to do it though all the pages and also because I want to start using PHP more.
    The Include works, as you can see below, but the code above does not work, because the home button should be a light yellow color.

    I can't comment on your PHP, but you can achieve your desired result quite simply using this demo from Nancy.
    http://alt-web.com/Articles/Persistent-Page-Indicator.shtml

  • I have a 27" Flat Panel Cinema Display with a failed LED panel. How much would this cost to get fixed?

    Just wondering if it's worth it to get fixed, or if I should just save my money for a new one. It is currently out of warranty. Any information would be great!

    Save your money.  The repair costs will be the same as buying a brand new Cinema Display.  Dell sells the same IPS display with different connectors, but they include a 3 year warranty.

  • AX as a ADSL router & bridge - would this work?

    I actually use a wired (ethernet) bound ADSL router, and an AXn wireless station, connected to the wired network, which includes an ethernet enabled laser printer and an MacMini used as a backup machine.
    I would like to replace the ADSL router by another AXn, which would use its ethernet port as a WAN port and be connected as a remote WDS base to the existing AXn.
    Basically this would look like this
    Internet (WAN) <---> AXn (new) <........> AX (existing <----> wired ethernet network
    1. Is this feasible?
    2. How should I configure the wireless side of the new AX connected to the WAN ?
    Thx in advance

    2. How should I configure the wireless side of the new AX connected to the WAN ?
    The new AXn's Ethernet port will need to be connected to your ADSL modem by Ethernet cable. If your ISP requires PPPoE credentials (username/password) in order to access their service, you would need to configure the AXn with these credentials through the AirPort Utility.

  • Animation: would this work?

    Say you want do make a cartoon, the old way. You draw all the cells, photograph them, and load them all in sequence into Imovie.
    It won't play as a smooth animation because you can't reduce the screen duration of a still shot down to 1/25th of a second.
    But if instead of taking a photo of each cell, what if you take a very short burst of video of each one, and load all those little video segments into Imovie. Then, you delete all frames of each segment except ONE. Shouldn't that leave you with a series of single frames, each of a different animation cell, that will run as a smooth animation when you hit play?
    I wanted to ask before I start. It'll take a loooong time, I know.

    ... I want "Disney-smooth. ...Disney? that WAS the company doing cell anim, right....?
    ok, the Disney classics as "Snowwhite" were painted every cell (not easy to get: the DVD has some "making of", showing the REAL Snowwhite.. forgot the actress' name, and how they used that as a blueprint for the paintings..), but most productions do 1:2/1:3 or higher.. the cheap Asian production do a mixture, they use realtime camera movements and some computer aided animations..... do some research with DVDs of your favorite, use the frame-forward-feature of your player, you'll be surprised…
    I can' recommend any good book (I'm sure, there are many), my knowledge is a collection from the last 30y I'm interest in that topic...-
    happy painting, "Disney smooth" (<< I like that term!) is 24 paitings per second (doing that with video, you do 25/30fps)... maybe that is the true reason why the gave up that part of the company... besides: a shame! they earn enough money with the productions of Pixar...
    I would spend some money on that boink… ploink… boom… what's its name??... software......esp. "onioning" is very easy done with video+Mac...
    A Mac is just a tool, but with your talent... probably, you'll be the next Carl Barks (ok, he never did animations, but he was THE BEST at Disney...), it was Georg Lucas, who said, he's afraid of these new "Garage Movie Makers". ;-))

Maybe you are looking for