Upgrade Error in HR module

HI friends,
               while upgrading we testing one report IN HR module im getting below error and schema is Z schema.
             An error has occurred during schema generation!
Call the schema editor to analyze errors*
            Check the syntax of the incorrect schema
<removed by moderator>
Thanks,
santhosh
Edited by: Thomas Zloch on Oct 18, 2010 9:52 PM

Hi,
That is not good... You have to check in PE01 where the schema is incorret.
Best regards,
Leandro Mengue

Similar Messages

Error in function module WWW_DISPATCH_REQUEST

Hi,
I am upgrading standalone ITS to integrated ITS.
In this process I refered to OSS notes number 979467. and i maintained all service files in WEBRFC service.
and when i am testing my services i am getting an error in the browser
saying:
'Error in function module WWW_DISPATCH_REQUEST'
Parameter Name Parameter value
sap-client 100
~USERAGENTTYPE M
~USERAGENTVERSION 6
~CALLED_FROM_ITS 6
~URLWGATE %_WEBRFC_HTTP_SERVICE
~SESSION SID:ANON:essap00_MIL_02:ByAZnf5VaI5DZcamNtjfwtDYdKZb5gkPV4oG3lBO-ATT
~URLIMAGEPATH C:\tmp\sapicons\
So i am not able to find an where i went wrong. Please suggest me or guide me to resolve the above error.
Thanks in advance

I am not sure this is an issue with getting the mime files for your webrfc service. If it is, please try the following:
From page 13 of the SAP document "Developing IACs with the SAP Integrated ITS"
MIME URL
MIME objects in the integrated ITS are accessed at runtime directly in the database. For this, a special ICF service mimes exists with the http request handler CL_HTTP_EXT_ITS_MIMES, which is stored in the ICF path defaulthost u2192 sap u2192 public u2192 bc u2192 its. It is used to fill parameter ~urlmime with the value /sap/public/bc/its/mimes. Also function mimeURL() returns this value as a result.
The ICF service mimes must be active if you want to execute an ITS service that accesses MIME objects.
Changes to the HTML templates are necessary only if the MIME URL in the ITS service does not contain the SAP default values.
Developing
Please also check out this OSS note 1076200 - WebReporting: Icon support for WebRFC Service
It may applies to your case.
The last parameter "~URLIMAGEPATH C:\tmp\sapicons\" may be the cause of the error.
Hope it helps.
Edited by: Danny Mak on Nov 23, 2009 8:03 PM

Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
I have upgraded the XP OS to SP3 with numerous updates;
Checked that the USB ports read Data sticks OK;
run a/v and malware programs, including Microsoft Safety Scanner;
checked that USB drivers are up to date;
uninstalled driver software and re-installed with software downloaded from HP;
carried out the procedures detailed in HP Support Forum 4022116
Error message the same.
This is for my elderly neighbour - help please!
This question was solved.
View Solution.

Hi @bodger50,
Welcome to the HP Forums!
I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
Hope this is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Problem upgrading and installing virtualbox-modules

Have some problems upgrading and installing virtualbox-modules
[elgringo@compjotr Desktop]$ sudo pacman -S community/virtualbox-modules
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: lirc: requires kernel26>=2.6.26-1
:: nvidia: requires kernel26>=2.6.26-1
Had to uninstall lirc nvidia and virtualbox-modules before I could upgrade the kernel and now I can't install the virtualbox-modules.
Anyone else who experienced the same problems?

virtualbox-modules depends on the kernel in core. If you want to use the kernel in testing, you'll need to rebuild the virtualbox-modules against it.
Virtualbox-modules will be fixed when kernel 2.6.26 will be moved in core. So you can wait if you prefer.

Quicktime Export Error: "An output module stopped responding."

I'm experiencing an odd export error whenever I use any Quicktime codecs:
"After Effects error: An output module stopped responding. The file may be damaged or corrupted. You may need to restart After Effects."
Similarly, Adobe Media Encoder hangs when outputting to Quicktime codecs. Neither program makes any progress at all before the hang occurs. At that point, I have to manually "end task" to exit. Also, it doesn't seem to matter what I try to export. In AME, for example, I can simply try to convert one video format to another and have it hang, so I don't think the problem is due to a problem with the source settings or effects. Also, I'm not attempting any multiprocessing since I don't really have enough RAM for that. Other output modules work, so I'm just exporting image sequences for the time being.
System specs:
Windows 7 64-bit
Intel i7-2600k processor
8 GB RAM
GTX 580 GPU
Software:
Adobe CS6
AE Plugins include Tracode Suite 12 and Optical Flares
Quicktime 7.7.3
Any thoughts on this? I've seen very few references to this error in other places, and not really found a solution that seems to apply to my situation. Thanks in advance for your help.
Josh

Thanks for setting me in the right direction. Clicking through to the 25 :: 101 error page (http://myleniumerrors.com/2013/01/06/25-101-4/) led me to a reference about other software, such as remote access software, using the same ports that AE needs for communication with its various processes. In my case, LogMeIn was the culprit. I had no idea that AE even used TCP for these types of operations, so that's very helpful to know.
*EDIT*
That worked temporarily, and now it doesn't work. I ran into a similar effect when I first disabled the Windows Firewall. But of course, as I type this and piddle around, it works again. It SEEMS like if I open AME and click into the output settings and scrub through the video preview, it makes everything work when I go to actually export. That's exactly the type of thing I would say is completely unrelated under normal circumstances, but at the moment all I know is that it is currently working and I don't want to test anything else until I finish the rendering I need to accomplish today. I'll work on it more later and post an update at that time.
Thanks,
Josh

Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

Hi All,
I'm using diadem from .net Program. While on the run I'm getting the following error.
Error While executing "" Command
Error type ACCESS VIOLATION
Error Address: 0006898E
Module name:gfsdesk.DLL
Anyone have any idea why this is happening?
regards,
Swaroop

Hi Swaroop,
It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
Andreas

I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

Error :the specified module could not be found --oci.dll : Oracle9i

hi ,
i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
"the specified module could not be found" for the file oci.dll.
earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
with regards,

Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.

Error message in excel 2003 : compile error in hidden module could be caused by Adobe Acroate add in

The error message in excel 2003 : "compile error in hidden module AutoExecNew" could be caused by Adobe Acroate add ins, thats waht microsoft told me.I use windows xp service pack3.I have got reader newest version and photoshop 6.0. With this and also with an older reader version I got the error message when opening excel. what can I do?
Best regards Ray

If you have Adobe Reader, you (probably) don't have Adobe Acrobat, a
commercial ($$) product. 5.0 is a very old release.
But you can check if the files are there anyway from long ago. See
http://support.microsoft.com/kb/307410
Aandi Inston

Reg: Error in RSQL module of database interface

Dear All,
I am getting this error.
Error in RSQL module of database interface. While i am giving the excise invoice date(j_1exchdr-exdat) more than 120 days i am getting this error.
SELECT VBRK~VBELN VBRK~FKART VBRK~WAERK VBRK~KNUMV VBRK~FKDAT
       VBRK~KURRF VBRK~KUNAG VBRK~FKSTO
       VBRP~POSNR VBRP~FKIMG VBRP~NETWR VBRP~VGBEL VBRP~MATNR
        VBRP~ARKTX VBRP~MATKL VBRP~WERKS VBRP~LGORT
      INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM VBRK
   INNER JOIN VBRP
    ON VBRK~VBELN = VBRP~VBELN
    WHERE VBRK~VBELN IN VBELN
    AND VBRK~FKART IN FKART
    AND VBRK~FKDAT IN FKDAT
    AND VBRK~FKSTO NE 'X'
    AND VBRP~MATKL IN MATKL
    AND VBRP~WERKS IN WERKS
    AND VBRP~LGORT IN LGORT.
what should i have to do? can i change this select query into selct for all entries what should i have to do?
Thanks,
Sankar M

Runtime Errors         DBIF_RSQL_INVALID_RSQL
Exceptn                CX_SY_OPEN_SQL_DB
Date and Time          21.11.2008 15:24:50
ShrtText
Error in RSQL module of database interface.
What happened?
Error in ABAP application program.
The current ABAP program "Z_EXCISE_DET11H1" had to be terminated because one of
      the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception will be dealt with in more detail
     below. The exception, assigned to the class 'CX_SY_OPEN_SQL_DB', was not
      caught, which
led to a runtime error. The reason for this exception is:
     The SQL statement generated from the SAP Open SQL Statement violates a
     restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
      o The statement contains too many input variables.
      o The space needed for the input data exceeds the available memory.
      o ...
You can usually find details in the system log (SM21) and in the
    developer trace of the work process (ST11).
    If an error occurs the developer trace often informs you about the
    current restrictions.
Missing Handling of System Exception
    Program                                 Z_EXCISE_DET11H1
Trigger Location of Exception
    Program                                 Z_EXCISE_DET11H1
    Include                                 Z_EXCISE_DET11H1
    Row                                     112
    Module Name                             START-OF-SELECTION
Source Code Extract
Line SourceCde
82                 FKART FOR VBRK-FKART,
   83                 FKDAT FOR VBRK-FKDAT,
   84                 VBELN FOR VBRK-VBELN, " OBLIGATORY DEFAULT '90002130',
   85                 MATKL FOR VBRP-MATKL OBLIGATORY," OBLIGATORY DEFAULT '01' NO INTERVALS NO-EX
   86                 LGORT FOR VBRP-LGORT NO INTERVALS NO-EXTENSION. "OBLIGATORY DEFAULT '1110'
   87
88 SELECT J_1IEXCHDR~RDOC
   89 FROM J_1IEXCHDR
90 INTO CORRESPONDING FIELDS OF TABLE EXCISEDOCNO
   91 WHERE
92   J_1IEXCHDR~TRNTYP = 'DLFC' AND
   93   J_1IEXCHDR~SRGRP IN SRGRP AND
   94   J_1IEXCHDR~EXDAT IN EXDAT AND
   95   J_1IEXCHDR~EXNUM IN EXNUM.
   96
97 LOOP AT EXCISEDOCNO.
98   VBELN-SIGN ='I'.
99   VBELN-OPTION = 'EQ'.
100   VBELN-LOW = EXCISEDOCNO-RDOC.
101   APPEND VBELN.
102 ENDLOOP.
103
104 LOOP AT EXCISEDOCNO.
105   IF J_1IEXCHDR-TRNTYP = 'CEIV' .
106     DELETE EXCISEDOCNO.
107     MODIFY EXCISEDOCNO.
108   ENDIF.
109 ENDLOOP.
110 *ENDLOOP.
111
>>>>> SELECT VBRKVBELN VBRKFKART VBRKWAERK VBRKKNUMV VBRK~FKDAT
113 VBRKKURRF VBRKKUNAG VBRK~FKSTO
114 VBRPPOSNR VBRPFKIMG VBRPNETWR VBRPVGBEL VBRP~MATNR
115 VBRPARKTX VBRPMATKL VBRPWERKS VBRPLGORT
116   INTO CORRESPONDING FIELDS OF TABLE ITAB
117 FROM VBRK
118
119 INNER JOIN VBRP
120 ON VBRPVBELN = VBRKVBELN
121 WHERE VBRK~VBELN IN VBELN
122 AND VBRK~FKART IN FKART
123 AND VBRK~FKDAT IN FKDAT
124 AND VBRK~FKSTO NE 'X'
125 AND VBRP~MATKL IN MATKL
126 AND VBRP~WERKS IN WERKS
127 AND VBRP~LGORT IN LGORT.
128
129
130
131

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

See Burger Error in BICMODULE-module:Adapter call failed. Reason: null

Hello All,
Scenario IDOC to File using Seeburger BIC problems in in my receiver adapter when converting from XML to EDI.
Error is:
"Message processing failed. Cause: Error in BICMODULE-module:Adapter call failed. Reason: null"
The Seeburger modules used in my receiver adapter:
1     localejbs/CallBicXIRaBean     Local Enterprise Bean     BIC_MT
2     localejbs/CallBicXIRaBean     Local Enterprise Bean     BIC
3     localejbs/Seeburger/FileStore     Local Enterprise Bean     ARCHIVE_EDI
4     CallSapAdapter     Local Enterprise Bean     0
with following module configurations
BIC     destDelimiter     @http://seeburger.com/xi/bic/destDelimiter
BIC     destSourceMsg     source
BIC     destTargetMsg     MainDocument
BIC     dynamicConfiguration     true
BIC     newLine     true
BIC     useAttribIfSet     true
BIC_MT     PartnerLookup     on
BIC_MT     destSourceMsg     MainDocument
BIC_MT     destTargetMsg     MainDocument1
BIC_MT     mappingName     XML_Generic_ANSI_X12_to_DB_MT_OUT
BIC_MT     saveSourceMsg     source
Can some one tell me why there is an Error and what additional module configurations it requires .
Thank you,

Hi,
If possible go to mapping in BIC designer Tool and execute the same by passing your payload there...
if you encounter any errors then there might be a problem with mapping developed...or can be payload..
Also check the parameter used for destSourceMsg source ...is that the source message which contains the payload ?
HTH
Rajesh

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

Problem deploying application - ERROR: No j2ee modules detected

Hi
I am new to jDeveloper, and I have created a stateless session EJB, and a JSF page with one ADF component on. When I try to deploy my application to Weblogic, I get this error:
ERROR: No j2ee modules detected in EAR archive. Deployment aborted
Any ideas what I can do to fix this?
Thank you
Søren

Hi, I had this same problem. The whole purpose of a EAR is containing a J2EE app. It's divided on a Web Components Archive (WAR) and a JAR with the Enterprise App. I found this document useful and the app could be deployed successfully to an EAR. Remember to include all you extra libraries as another file Group of the "Libraries Type". Basically you owuld have to separatelly create the WAR deployment descriptor, the EJB JAR deployment descriptor and after that create the EAR based on one or two of them.
[http://download.oracle.com/otndocs/tech/ias/portal/files/RG/OBE/deployToAppServer/lesson_Deployment.htm|http://download.oracle.com/otndocs/tech/ias/portal/files/RG/OBE/deployToAppServer/lesson_Deployment.htm ]
This document is intended for Jdev10g and OracleAS 10, but the procedure is almost the same for both versions.

Error in BIC MODULE BIC MODULE modules: trigger file [not specified] conta

Hello, i have a problem with the BIC Seeburger MD
Scenario overview:
IDoc Invoice02 => Message Mapping (Seeburger content) => FTP Seeburger Comm. Canal integrated with BIC adapter. This works correctly. Then I tested the field mapping and the BIC Adapter brings no more errors in field mapping.
BUT NOW THIS ERROR MESSAGE IS:
Error in BICMODULE modules: Temporary error: BIC XI Adapter call failed. Reason: Error: [Error: ID = 1104; LEVEL = 3] trigger file [not specified] contains no valid trigger. DESCRIPTION: You have specified no valid trigger for that mapping. Please change this within BIC Mapping Designer.
Destination Message is the Edifact Invoic D96A
I hope one of you can help me
Kind regards
Tobias

Hi Tobias,
there is a either a problem with your XML Message or with the BIC Mapping which converts XML to EDI.
What's the name of the BIC-Mapping that you use in your FTP Module chain?
You can also check the following to make sure, your BIC Mapping works correctly:
a) Take your Invoice Idoc and convert it with the Message Mapping into Edifact-XML
b) Use BIC Mapping Designer and open the Mapping that you use in the Module Chain (Should be XML-->Edifact)
c) Take the Edifact-XML Message from your PI Message Mapping and convert it in the Test Environment of BIC Maping Designer.
If you get the same error, there's something wrong with your Edifact-XML message
If the mapping works, there's something wrong in your module configuration. (Maybe you can post your module configuration)
regards,
Daniel

Upgrade Error in HR module

Similar Messages

Maybe you are looking for