Upgrade error messages and wont sync
I upgraded, as normal, and afterwards it said my computer wasn't authorized and therefore it would not sync it. i also wouldn't let me authorize it.. everytime an error message popped up. i can't do anything with my phone and its been almost a week since this started and i haven't found a solution. anyone else have any advice?
Try using the 12 digit code from the Android device, which is already connected to the Sync server, into the Desktop PC to set that device up after the format.
Similar Messages
-
I rented a movie about 45 mins ago. It stopped downlaoding at 20 mins of the movie. It gives me an error message and wont finish downloading.
It gives me an error message and wont finish downloading.
What does the error message say? Include error message numbers if you're getting any, please. -
I recently noticed that a ton of songs weren't playing all the way through and I tried to sync them up. That led to "restoring" my iPod a few times. Finally able to sync and get all songs and podcasts and photos onto my iPod, but along with an error message that the sync couldn't be done due to an unknown error 13010. The songs are there but I can't do anything with them such as make playlists or even change how they're listed. This is incredibly frustrating as NOTHING has happened to this iPod to cause this to happen.
AND i already tried to delete the iTunes library genius.itdb file!!
-
Keep getting error message itunes wont sync with iphone...help anyone
keep getting error message...iphone wont sync with itunes..help anyone
keep getting error message
What does the message say? (Precise text, please.) -
I had to wipe firefox on my desktop because of a virus. i had set up sync but did not save my recovery anywhere. I had also synced my droid but when i typed in the 12 digit code that my desktop generated onto the droid, it said "sync encountered an error while syncing: wrong recovery key. sync will automatically retry this action." i tried to unlink and set up sync again, but i keep getting this error. how can i get my recovery key without losing my saved bookmarks?
Try using the 12 digit code from the Android device, which is already connected to the Sync server, into the Desktop PC to set that device up after the format.
-
Why do I get error messages and failed sync's of wma songs?
I'm pulling my freakin hair out.
I have been able to transfer songs burned from cd's to my crackberry (converted in wma format) but have not been able to sync songs purchased from walmart in wma format (windows media player) or songs purchased from I-tunes in their format. I've got a 8330 curve, the 4.2.1.5. (whatever) latest update with Roxio, a Sandisk 1 gb micro sd card. The songs have unlimited sync rights and everything from hardware to software seems to be in order. Mass storage device is on and all the card properties are just as the instructions suggest (are they right?)
I've tried copying and pasting from desktop and sending to the usb port and it will copy over but you get about 1.2 seconds of song and it pukes out.
Either I'm an **bleep** or the phone and the formats are too smart for each other or are in divorce court. This really shouldn't be hard. WTF? Do we really have to be .edu guy to figure this crap out?
Any help would be greatly appreciated.
Thanks
Jeffhow can email site be reconfigured?
-
I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not sync more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync process. The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack. Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause. The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that. Your advise would be enthusiastically received.
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??
Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X -
I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?
make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
copy the installation files to a desktop folder and install from there. -
what do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?
Hello brainiac08
Typically that error occurs because of a backup issue. Check out the article below to resolve it.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am attempting to sync my phone with iTunes and I keep getting an error message 42001 so my phone can not sync with iTunes... What is this error message and what can I do to fix this problem and sync my phone to iTunes?
Dear Apple team,
I recently bought an iphone3GS from USA and jail broke it. Since I heard the there are lots of disadvantages I thought to unlock it officially through the original owner (in copy). He assisted me and confirmed that he unlocked it with AT& T (See the attachment). According to the instructions I restored the phone. But it is not activating with “Activation server is currently not available, please try again or try with iTunes”
When I try with iTunes , it says “you haven’t inserted a SIM” even though I insert the original AT&T SIM.
My current location is Sri Lanka ,so don’t have any apple support.
Please help me to be a good fan of apple. -
In downloading iTunes onto my PC (Dell XPS 8700) with Windows 8.1 trying to sync my iPhone but receive keep receiving following error message and I just don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.
I would greatly appreciate help with this matter.See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
Since updating my iPhone 3GS to iOS 4.3.3 I have been unable to sync my photos! Keep getting the error message unable to sync and 'the required file cannot be found.' Please help?
Try deleting the iPod Photo Cache on your computer.
http://support.apple.com/kb/ts1314 -
I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!
Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection. -
I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.
There have been problems reported with Sync.
They are working on it, so please try again later when those problems are fixed.
*https://services.mozilla.com/status/
*http://twitter.com/#!/mozservices
Maybe you are looking for
-
Apple File Settings "Greyed" out?
I'm trying to access the Apple File Setting pane of a folder that is shared through my workgroup manager however all the settings have been greyed out. Specifically I want to toggle the option of Inherit permissions from parent as opposed to the curr
-
Hi All, There are two ODS in our scenario. One Standard and One Custom ODS. For this standard ODS ( for Region - 1) we performed an Init long before for which the Deltas are running everyday smoothly. Now we have built a custom ODS for Region - 2 whi
-
SAP Web dispatcher not forwarding incoming HTTP portal sessions.
Hello, We are using an EP6 Portal from which Abap Web dynpros are launched. The incoming http sessions were accessing our backend ECC6 SAP system through the sap server message . The http sessions were badly dispatched between the two abap servers. W
-
Mucho strangeness: passwords not propagating to AD, and other annoyances
Hi all, I'm dealing with a few problems in IDM at the moment, and am looking at a small grab-bag of symptoms, which may or may not be linked to each other or to the problem at all. The main current problem is that passwords aren't propagating into ou
-
Changing radio button property dynamically
Hi, I decalred two blocks in selection screen named B1 and B2, each have 2 radio buttions. B1 has radio button named B1R1 and B1R2. B2 has radio button named B2R1 and B2R2. If i select B1R1 then B2R1 should be selected and B2R2 should be disabled(use