Upgrade Exchange 2010 SP2 to SP3 getting fail

Hi,
I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
Preparing Exchange Setup
    Copying Setup Files                           COMPLETED
The following server roles will be upgraded
Languages
Hub Transport Role
Client Access Role
Management Tools
Performing Microsoft Exchange Server Prerequisite Check
    Configuring Prerequisites                                 COMPLETED
    Organization Checks                                      
FAILED
     Setup needs to contact the Active Directory schema master but this computer
 is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
     Setup encountered a problem while validating the state of Active Directory:
 Exchange organization-level objects have been created but have not yet replicat
ed to the local domain.  Wait for replication to complete and then run setup aga
in.
    Language Pack Checks                                     
COMPLETED
    Hub Transport Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
 Exchange organization-level objects have been created but have not yet replicat
ed to the local domain.  Wait for replication to complete and then run setup aga
in.
    Client Access Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
 Exchange organization-level objects have been created but have not yet replicat
ed to the local domain.  Wait for replication to complete and then run setup aga
in.
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Exchange Server setup encountered an error.
Thanks,
San

Hi,
Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
on domain controller holding schema master role.
Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

  • Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

    Hello Everyone,
    When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
    2010 sp3. Can anyone help me with this error?

    I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
    This is in the log;
    [10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
    '{ server.company.com }'
    [10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
    [10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
    [10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
    Internet services successfully stopped
    Attempting start...
    Restart attempt failed.
    The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start.  The service, or dependent services, may had an error during its startup or may be disabled.
    Process standard error:
    [10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
    [10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
    [10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
    [10-08-2014 21:55:31.0640] [1] 0.  ErrorRecord: Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
        Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
    " was run: "Process execution failed with exit code 1062.".
    [10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
    [10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
    [10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
    Anyone has any ideas?

  • Exchange 2010 SP2 to SP3 upgrade fails on Client Access Role

    Hello,
    I have searched everywhere and cannot find any answer to my problem. We have 1 Exchange server with all 3 roles installed and during the upgrade from SP2 to SP3 the server fails during the Client Access Role with the following error:
    Error:
    The following error was generated when "$error.Clear();
              Get-ClientAccessServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
            " was run: "Invalid URI: The format of the URI could not be determined.".
    Invalid URI: The format of the URI could not be determined.
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp
    here is more info from the ExchangeSetupLogs
    [10/09/2014 09:26:07.0463] [1] Executing:
              Get-ClientAccessServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
    [10/09/2014 09:26:07.0463] [2] Active Directory session settings for 'Get-ClientAccessServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'ADROOT.DOMAIN.local', Preferred Global Catalog: 'ADROOT.DOMAIN.local', Preferred Domain Controllers:
    '{ ADROOT.DOMAIN.local }'
    [10/09/2014 09:26:07.0463] [2] Beginning processing Get-ClientAccessServer -Identity:'EXCH2010.DOMAIN.local'
    [10/09/2014 09:26:07.0463] [2] Active Directory session settings for 'Add-ADPermission' are: View Entire Forest: 'True', Configuration Domain Controller: 'ADROOT.DOMAIN.local', Preferred Global Catalog: 'ADROOT.tioh.local', Preferred Domain Controllers: '{
    ADROOT.DOMAIN.local }'
    [10/09/2014 09:26:07.0463] [2] Beginning processing Add-AdPermission -User:'S-1-5-20' -ExtendedRights:'Exchange Web Services Token Serialization'
    [10/09/2014 09:26:07.0479] [2] Searching objects "EXCH2010.DOMAIN.local" of type "Server" under the root "$null".
    [10/09/2014 09:26:07.0479] [2] Previous operation run on domain controller 'ADROOT.DOMAIN.local'.
    [10/09/2014 09:26:07.0479] [2] Previous operation run on domain controller 'ADROOT.DOMAIN.local'.
    [10/09/2014 09:26:07.0479] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
    [10/09/2014 09:26:07.0510] [2] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Invalid URI: The format of the URI could not be determined.
    [10/09/2014 09:26:07.0526] [2] [ERROR] Invalid URI: The format of the URI could not be determined.
    The article it references doesn't exist and I cannot find anything related to this error searching the web.
    Please help!
    NJV

    Hi  NJv7300
    Thank you for your question.
    By your state, I know you get error when you use Get_ClientAccessServer. I think it caused by AutoDiscover, you can check it.
    You can refer to the following link:http://www.shudnow.net/?s=autodiscoverserviceinternaluri
    You can refer to the following steps:1. 
    1. Using LDP, locate the following container:
    CN=<SERVERNAME>,CN=Autodiscover,CN=Protocols,CN=<SERVERNAME>,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=<ORGNAME>,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=<DOMAIN>,DC=<TLD>
    2. Double-click the <SERVERNAME> under Autodiscover and look for the "serviceBindingInformation" value:serviceBindingInformation (2): AutoDiscover.Corp.HMSA.com;
    https://honmail.corp.hmsa.com/autodiscover/autodiscover.xml;
    serviceClassName: ms-Exchange-AutoDiscover-Service;The proper format for the Autodiscover URI is
    https://serverfqdn/Autodiscover/Autodiscover.xml
    3. Ran Set-ClientAccessServer -Identity HON10343 -AutodiscoverServiceInternalUri
    https://honmail.corp.hmsa.com/autodiscover/autodiscover.xml
    4. Ran Get-ClientAccessServer, but received an error after HON10343 was enumerated.
    5. Next, did another Set-ClientAccessServer on HON10344.
    6. Finally, ran Get-ClientAccessServer and enumerated all CAS servers in the org without error.
    7. Tested opening EMC on both Exchange 2007 and 2010 and were able to successfully expand the Server Configuration for every role and enumerate all servers.
    If any questions, please let me know.
    Best Regard,
    Jim Xu

  • Workaround instead of Upgrading Exchange 2010 Severs to SP3

    Hi
    I have a customer in an exchange 2010 environment who has 4 exchange servers in place with DAG and NLB setup. We plan to go ahead with a Hybrid setup however just need to clarify if there is any workaround that we could apply instead of having to upgrade
    there exchange server to 2010 SP3?
    Thanks & Regards
    Aaqib

    Hi,
    I notice that you want to deploy hybrid environment, and don’t upgrade to Exchange 2010 SP3.
    Depending on the Microsoft document, Exchange 2010 SP3 support hybrid deployment with Exchange 2013 CU1 or later version, however Exchange 2010 SP1 and SP2 are not supported.
    More details about Hybrid deployment prerequisites, for your reference:
    https://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
    Best Regards,
    Allen Wang

  • Updating Exchange 2010 SP2 to SP3

    Hi,
    I'm trying to migrate our Exchange 2010 to Exchange 2013 to different server but first I need to update it. I managed to update from SP1 to SP2 without any major problems but now I'm trying to update form SP2 to SP3.
    Update fails when it goes to Client access role phase. In ExchangeSetup log I have following error messages:
    [07.03.2014 07:39:27.0982] [2] Active Directory session settings for 'precompile-ManagedBinary' are: View Entire Forest: 'True', Configuration Domain Controller: 'MASTER.domain.local', Preferred Global Catalog: 'MASTER.domain.local', Preferred Domain Controllers: '{ MASTER.domain.local }'
    [07.03.2014 07:39:27.0982] [2] Beginning processing precompile-ManagedBinary -BinaryName:'C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe'
    [07.03.2014 07:39:27.0982] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe with arguments: install "C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe" /queue /nologo /verbose
    [07.03.2014 07:39:28.0247] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
    Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
    [07.03.2014 07:39:28.0263] [2] Process standard error:
    [07.03.2014 07:39:28.0263] [2] Process standard error: Retry(1/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
    [07.03.2014 07:39:29.0292] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
    Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
    [07.03.2014 07:39:29.0292] [2] Process standard error:
    [07.03.2014 07:39:29.0292] [2] Process standard error: Retry(2/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
    [07.03.2014 07:39:30.0322] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
    Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
    [07.03.2014 07:39:30.0322] [2] Process standard error:
    [07.03.2014 07:39:30.0322] [2] Process standard error: Retry(3/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
    [07.03.2014 07:39:31.0367] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
    Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
    [07.03.2014 07:39:31.0367] [2] Process standard error:
    [07.03.2014 07:39:31.0367] [2] [ERROR] Unexpected Error
    [07.03.2014 07:39:31.0367] [2] [ERROR] Process execution failed with exit code -1.
    [07.03.2014 07:39:31.0367] [2] Ending processing precompile-ManagedBinary
    [07.03.2014 07:39:31.0367] [1] The following 1 error(s) occurred during task execution:
    [07.03.2014 07:39:31.0367] [1] 0. ErrorRecord: Process execution failed with exit code -1.
    [07.03.2014 07:39:31.0367] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
    [07.03.2014 07:39:31.0367] [1] [ERROR] The following error was generated when "$error.Clear();
    $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.exchange.addressbook.service.exe");
    precompile-ManagedBinary -BinaryName $fullPath;
    " was run: "Process execution failed with exit code -1.".
    [07.03.2014 07:39:31.0367] [1] [ERROR] Process execution failed with exit code -1.
    [07.03.2014 07:39:31.0367] [1] [ERROR-REFERENCE] Id=AddressBookComponent___6f3e1aaa7a2d468a9f3e83382ec479b2 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [07.03.2014 07:39:31.0383] [1] Setup is stopping now because of one or more critical errors.
    [07.03.2014 07:39:31.0383] [1] Finished executing component tasks.
    [07.03.2014 07:39:31.0383] [1] Ending processing Install-ClientAccessRole
    I have tried couple of times and rebooted the server without success. Any help?
    Thank you.

    Hi,
    I'm running SBS2011 and was not able to use ExBPA.
    I ended to create new domain + exchange to my enviroment since I had backed up data from server previously.
    Thank you

  • Exchange 2010 SP2 to SP3 Powershell script execution policies

    Hi,
    I have broken Labs when installing service packs on exchange 2010 servers because the powershell execution policies have been incorrectly configured. Once the WMI service has been stopped, the scripts within the SP haven't been able to start it up again. 
    I can't find any info on Powershell script execution policies in relation to the SP3 for 2010 prerequisites. Does anyone know what they should be set at? And why haven't these been at the top of the list of prerequisites for installations of service packs
    for exchange? 

    Hello,
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Cara Chen
    TechNet Community Support

  • Exchange 2010 SP2 to SP3 upgrade question regarding Forefront

    When doing an upgrade from 2010SP2 to SP3 is it recommended stopping all exchange services manually before installing the update?  I know there is a prereq of stopping forefront or you may have an issue with services starting.  I have not run into
    this issue in my test environment.  I do not know if the SP3 install requires any checks of services to be running or not.
    I have also notices on a cas/ht server with forefront installed, you can't stop forefront without shutting down the transport service.  So is it best to just shut all services down first before doing the upgrade?

    Hi,
    Based on the article below, you can stop all Exchange services before you decide to install an Exchange service pack, if you really require this.
    How to install a service pack or software update on an Exchange Server computer that is running Forefront Security or Forefront Protection
    http://support.microsoft.com/kb/929080/en-us
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Exchange 2010 SP2 Upgradation in DR site

    Hi All,
    I am planning upgrade exchange 2010 SP2 from SP1in DR servers which is in different site of AD.
    I have already run the prepare schema and prepare ad in schema master which is in production site and it got replicated in DR Domain controllers.
    But, still i am not able to upgrade the server. The error says,
    :\Exch SP2>Setup /m:upgrade /InstallWindowsComponents /Hosting
    Welcome to Microsoft Exchange Server 2010 Unattended Setup
    Preparing Exchange Setup
        Copying Setup Files                           COMPLETED
    The following server roles will be upgraded
    Languages
    Hub Transport Role
    Client Access Role
    Management Tools
    Performing Microsoft Exchange Server Prerequisite Check
        Configuring Prerequisites                                 COMPLETED
        Organization Checks                                      
    FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Language Pack Checks                                     
    COMPLETED
        Hub Transport Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Client Access Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
    The Exchange Server setup operation didn't complete. More details can be found
    in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    Exchange Server setup encountered an error.
    Please let me know if you have options

    Hi All,
    I am planning upgrade exchange 2010 SP2 from SP1in DR servers which is in different site of AD.
    I have already run the prepare schema and prepare ad in schema master which is in production site and it got replicated in DR Domain controllers.
    But, still i am not able to upgrade the server. The error says,
    :\Exch SP2>Setup /m:upgrade /InstallWindowsComponents /Hosting
    Hi,
    If you run Get-OrganizationConfig | fl Name,objectversion in your DR-Site, what is the version number you see?
    If its not 14247, the schema has not been upgraded.
    /Hosting is not supported with SP2, so you need to leave that out.
    It might be better if you post in the forum
    Exchange 2010 for Hosters
    Some additional reading:
    Future of /Hosting Mode
    Martina Miskovic

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8

    I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
    I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error.  Is this even possible?  I cannot find any documentation on this scenario yet.
    VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
    version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
    VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
    The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
        + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
        + FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest

    Hi Steve,
    I'm a little confused what you are saying. Here is my understanding:
    When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
    If I have misunderstood your concern, please let me know.
    For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
    2007.
    Hope it helps.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • EWS 1.2, Exchange 2010 SP2/SP3 - Appointment message body gets wrecked on update

    We're seeing a very irritating issue with EWS and Exchange when updating the message body on an Appointment. To head it off, it does not appear to be the bug detailed here:
    http://blogs.msdn.com/b/dhruvkh/archive/2012/05/18/sending-appointments-from-ews-apps-where-did-my-html-go.aspx
    It happens on both 2010 SP2 and SP3. We're creating Appointments with some HTML formatting the message body. Nothing fancy, just a few tables and a little bit of inline styling (since a css style header disappears into a black hole when you try to use it
    as part of the Appointment message body). We're able to make a nice-looking message body that goes out in the meeting requests. Well, with the exception of downlevel text at the top, but there doesn't seem to be much we can do about that short of a double-tap
    save.
    The problem comes into play if we need to update the message body on the Appointment. All of this is automated, so the user cannot directly edit it. If we make any changes to the message body, it completely wrecks the HTML. It's still an HTML-formatted message,
    but much of the styling is lost and it looks awful. This happens without fail when we alter the message body of an Appointment with any considerable level of HTML formatting. BodyType is HTML, of course. I've done some digging on the best body algorithm and
    some of the MAPI properties related to it. Some interesting bits of note:
    When the Appointment is first saved, PidTagRtfInSync is true. PidTagNativeBody is 2, which indicates an RTF message. PidTagBody is present. PidTagRtfCompressed is present. However, PidTagBodyHtml is not present. After updating the Appointment with a message
    body edit, PidTagBodyHtml is present, but now PidTagRtfInSync is false and PidTagNativeBody is 3.
    If PidTagBodyHtml is set directly as an extended property instead of setting the message body via the EWS Appointment object, then the formatting is wrecked right out of the gate. At least it's consistent that way...
    Attempting to set PidTagNativeBody manually had no effect.
    When viewing the PR_BODY_HTML contents between a good and bad message, the good one will contain the transformed HTML. It doesn't look much like what we had initially handed to it, but gets changed in the conversion process. The bad one is much closer to
    what we wrote in actual HTML, but has still had much of the styling removed. It's as if creating the Appointment does the RTF conversion, but any subsequent changes use a completely different code path serverside and there does not appear to be any way around
    it short of even more guess and check with EWS and Exchange chewing up HTML. This is complicated by being unable to find any documentation that details how and what gets changed, discarded, etc in the process.
    This will always affect requests, but only seems to affect Appointments in the calendar of attendees if the body includes the downlevel text. Appointments without the downlevel text appear to survive updates with their formatting intact. Appointments with
    downlevel text get their formatting wrecked with updates.
    Has anyone run into this before? It was painful enough when we found that our previously-used email HTML formatter wouldn't work with EWS and everything had to be inlined, but now it seems that there are even more inexplicable problems to get around. Is
    there a way to update the message body without this happening?

    Ugh... hopefully I can ask you gentleman how to solve my issue.
    I recently implemented code to allow our users to turn-on HTML-encoding for when our Sync'ing app goes to add/update items for them into Exchange.
    If thev'ye turned-on HTML formatting, when I create a CalendarItemType's (in C# based off the EWSProxies.EWS.Itemtype) the Body.Value is being set with a string which contains very minimal HTML tags... just <br>'s instead of "\r\n" and for
    URL link values we are embedding into the text, I'm encapsulating those within an <a href> 
    Example: <a href="http://TheWebSite.com/EventDisplay.aspx?uri=1234">Event Display Link</a>
    My problem is... when I retrieve an item from Exchange... there is a huge amount of extra HTML encoding it wraps around everything! 
    By inspecting in the debugger... I've discerned that :
    For Appts... the main bunch of text that I inserted in an item when originally creating it is contained just within the <div> tag.
    For Tasks... the main bunch of text that I inserted in an item when originally creating it is contained just within the <body> tag (and on these there is no <div> tag created).
    I was able to use the HTML Agility Pack and load this Body.Value string into the enhanced HtmlDocument object.  I first attempt to parse first for the <div> nodes contents. If the <div> is not-null that's an Appt.  If the <div>
    is null, I instead parse out the <body> nodes contents, and those are Tasks.
    I noticed for Appts :
    For every <br> tag I had in my original text.. it appends two consecutive "\r\n" 's after it!  No problem I can just do a Replace("\r\n", "")  and zap those. But then the <a href> I have in there... it
    encapsulates it with a <font> node where it sets a color for the link and also an underline <u> node.  I can handle the <u> nodes easy enough with a Replace("<u>","") and a Replace("</u>", ""); 
    But what about the damn <font> node?  It's in the format of <font color=\"blue\"></font> and I'm sure the \"blue"\ part could be different for every user.
    I noticed for Tasks :
    It prepends a "\r\n" just inside the begininng<body> tag. Each of the original <br> tags gets an "\r\n" appended behind it.  and for the TaskType for the <a href> node IT DOES NOT encapsulate it with the <font>
    and <u> nodes as it does for the Appt.
    How can I stop it from changing the Body content when retrieving it?  Will it not change anything if I go the extra mile and make sure to wrap everything with an <html> and <body> node when initially creating the items?
    Any and all help on this issue is sorely appreciated.
    Thank You,
    -G

  • Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter

    We are upgrading from Exchange 2007 SP2 to SP3.
    Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
    DC is on windows 2008 Enterprise 32 bit OS - SP2
    When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
    On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 1:12:38 PM] [0] End of Setup
    [2/1/2015 1:12:38 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:53 PM] [0] **************
    [2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server''  
    [2/1/2015 2:17:53 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [0] **************
    [2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [0] **************
    [2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:55 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [0] **************
    [2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Ending processing.
    [2/1/2015 2:19:07 PM] [1] Beginning processing.
    [2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:07 PM] [1] Ending processing.
    [2/1/2015 2:19:08 PM] [1] Ending processing.
    [2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:19:20 PM] [0] **************
    [2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
    [2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''  
    [2/1/2015 2:19:20 PM] [1] Beginning processing.
    [2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
    [2/1/2015 2:19:20 PM] [1] The following roles are current: 
    [2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
    [2/1/2015 2:19:26 PM] [1] Found 22 components
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
    [2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
    [2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/1/2015 2:19:32 PM] [2] Beginning processing.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/1/2015 2:19:35 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:51 PM] [2] Process standard error: 
    [2/1/2015 2:19:51 PM] [2] Ending processing
    [2/1/2015 2:20:07 PM] [2] Process standard error: 
    [2/1/2015 2:20:07 PM] [2] Ending processing.
    [2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:07 PM] [2] Beginning processing.
    [2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
    [2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:10 PM] [2] Process standard error: 
    [2/1/2015 2:20:10 PM] [2] Ending processing.
    [2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:10 PM] [2] Beginning processing.
    [2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
    [2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:12 PM] [2] Process standard error: 
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
    [2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
    [2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
    Appreciate if someone can help us move forward in this scenario.
    We have
    1. disabled anti virus and tried.
    2. removed watermarks and action entries in the registry
    3. tried almost everything mentioned on google but i am not able to move forward.
    Please help. we need this as part of our migration to Exchange 2013 for co-existence.
    Thank you.
    Philip

    ExchangeSetup.log (part 3)
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
    [2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/2/2015 8:06:45 PM] [2] Beginning processing.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:07:00 PM] [2] Ending processing.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/2/2015 8:07:00 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
    [2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
    All compilation targets are up to date.

  • Upgrade Exchange 2010 from SP2 to SP3 RU4

    Hi All,
    We are planning to upgarde Exchange 2010 SP2 servers with stretched dag across 2 AD sites to SP3 RU4.
    I have few questions.
    1. We are planning to Upgrade HUB/CAS servers in both the sites in first  week.
    2. Then we are planning to upgrade mailbox servers in the next week in both sites.
    3.
    Do you think this is a good approach. Can some one please share best pratices document as we are using F5 load balancing.

    Hi,
    Vishwanath's suggestions are pretty helpful. Besides that, we should make sure that the update process should be managed to prevent all of the DAG members from being offline at the same time.
    Here is an article about how to install Update Rollups on Database Availability Group Members for your reference.
    Installing Update Rollups on Database Availability Group Members
    http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Upgrade From Exchange 2010 SP1 to SP3 - Schema Upgrade Question

    Hello,
    We're currently running Exchange 2010 SP1 in our environment and want to upgrade to SP3.  I just had a couple of questions related to preparing AD for this new SP that I was hoping that someone could answer.
    Setup
    We have a single forest with two domains within it (A and B for example).  The schema master is in Domain A but this domain doesn't contain any Exchange 2010 servers.  Domain B contains our 2010 CAS and Mailbox servers.
    Both domains have Windows 2003 SP2 domain controllers.
    I understand that before I proceed with the upgrade to SP3, I first need to update the AD schema on our schema master. I was planning on doing the following :
    Log onto an existing Windows 2008 R2 64 bit "member" server in domain A (containing the schema master) with an account which is a member of the Schema Admins and Enterprise Admins groups.
    Run SETUP.EXE /PrepareAD.
    Do I need to also run SETUP.EXE /PrepareDomain on domain A as well or does the /PrepareAD sort this out ?
    I was then going to turn my attention to domain B (which contains the 2010 CAS and Mailbox servers) and do the following :
    Log onto an existing Windows 2008 R2 64 bit 2010 Mailbox server with an account which is a member of the Domain Admins and Enterprise Admins groups.
    Run SETUP.EXE /PrepareDomain
    Is this the correct procedure to follow ?  I assume that I can then go ahead and start to upgrade the Exchange 2010 SP1 servers in the following sequence :
    CAS\HUB Server(s)
    Mailbox Server(s).
    Clarification on the AD upgrade steps would be appreciated.
    Thanks
    Mark

    This has all the info you need:
    http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
    Prepare Active Directory and Domains
    and
    http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
    Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
    Note: There is no harm in simply running setup/PrepareAllDomains.
    You should break out each Prep step since you have multiple domains:
    setup/PrepareSchema
    setup /PrepareAD
    setup /PrepareAllDomains
    you can run all of these from the same DC you run the setup/PrepareSchema step!
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • AutoDiscover not working after Exchange 2010 SP2 - SP3 update.

    Hi Everyone, 
    I'm sorry if this is a really simple thing, but i've played around for hours and exhausted google.
    I run a 2010 exchange server for everyone at the office, and today I updated from 2010 SP2 to SP3.
    The problem I have is auto discover no longer accepts anyones username or password. If you set the account up on the client machine by manually entering the details everything works great.
    All the DNS records are correct and have been working for 2+ years. I have recreated the Autodiscovery virtual directory in EMC.
    If i manually browse to mydomain/Autodiscover/Autodiscover.xml, when asked for a username and password it says it incorrect. I can then log in to OWA with the same credentials and it works. 
    Thanks,
    Garrett
    The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://mydomaincom.au:443/Autodiscover/Autodiscover.xml for user mydomain.com.au.
    The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response.
    Additional Details
    An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).
    HTTP Response Headers:
    Transfer-Encoding: chunked
    Connection: keep-alive
    Content-Type: text/html
    Date: Wed, 22 Apr 2015 00:44:51 GMT
    Set-Cookie: __cfduid=dc0261b4643b5dbe27f750bbc28bfef7c1429663490; expires=Thu, 21-Apr-16 00:44:50 GMT; path=/; domain=.macarthurcs.com.au; HttpOnly
    Server: cloudflare-nginx
    WWW-Authenticate: Negotiate,NTLM,Basic realm="mydomain.com.au"
    X-Powered-By: ASP.NET
    CF-RAY: 1dad4d701ae911c5-SJC
    Elapsed Time: 3357 ms.
    Attempting to test potential Autodiscover URL https://autodiscover.mydomain.com.au:443/Autodiscover/Autodiscover.xml
    Testing of this potential Autodiscover URL failed.

    Hi,
    Based on my knowledge, the above issue is caused by the loopback check being enabled. Please follow the steps below to disable loopback on the CAS servers:
    1. Run regedit, in Registry Editor, locate and then click the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    2. Right-click Lsa, point to New, and then click DWORD Value.
    3. Type DisableLoopbackCheck, and then press ENTER.
    4. Right-click DisableLoopbackCheck, and then click Modify.
    5. In the Value data box, type 1, and then click OK.
    6. Quit Registry Editor, and then restart your computer.
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

Maybe you are looking for