Upgrade failed, continuous loop requesting restart

I tried to download a newer version of firefox. It wiped out my old version. Every time I try to open firefox it requests that I restart to complete a previous version of firefox. I do this again and agauin and cannot open firefox. What do I do?

If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)

Similar Messages

Why does my computer say 'your computer restarted due to a problem' and continuously loop?

I am trying to upgrade from Lion to Mountain Lion on my iMac. It says that the installation is successful, but then shows 'Your computer restarted due to a problem' and continuously tries to restart.
I tried to set up Apple support with the 90-day complimentary support, but because the iMac itself is older it won't allow me to contact them.
Any help with fixing the problem or how to get in touch with Apple's support is appreciated.

You maybe having kernal panic problems.
Kernel Panics - About
Kernel Panics - Avoiding and Eliminating
Kernel Panics FAQ
Kernel Panics FAQ (2)
Kernel Panics - Understanding and Debugging

I am trying to update my iphone software from 4.2.5 through my Mac but am not successful. It just goes into a continuous loop saying that there is an update available and to install and restart but the update never happens.

I am unable to update my iphone software 4.2.5 to the latest version through my Mac. I get into a continuous loop of clicking on update and getting the message to restart the computer. But nothing updates.

I imagine you are talking about iPhone 4 CDMA (Verizon, Sprint). iTunes will only allow Update or Restore to iOS 6.0.1 You need to update iTunes on your computer to current version 10.7, with computer click the iTunes Tab at the top of this page and install current iTunes 10.7 If this iTunes will not install you may need to update your computer System, or try a different computer.

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upg

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upgrade from? So now I have spent lots $$ and nothing working. Why is this so complicated? what do I need to do?

Hi Rave,
Thanks for this; my issue is that I have now supposedly purchased a retail version of Acrobat X1 (i.e just spent more $$, after the upgrade attempt to Acrobat X1 failed), and while this feigns an OK install, it fails in someway to override the "Upgrade Acrobat X1 version". E.G. once I load up to read an acrobat file the "upgrade version" executes/intercepts and ask for serial numbers and check for a previous qualifying version which I do not have, (BUT what I do have is the current retail version of acrobat X1 which is not recognised)
Do I need to uninstall and start over again? (I am reluctant to do this as I am sure serial number issues will arise, as I assume downloaded file will be cleaned up etc, and I am not spending more money trying again!)
Any suggestions?

Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
             -1: 'startsap.exe' returned an error
             See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
     msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
     disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
     igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SID
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    150
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
     shared lib "dw_xml.dll" version 150 successfully loaded
     shared lib "dw_xtc.dll" version 150 successfully loaded
     shared lib "dw_stl.dll" version 150 successfully loaded
     shared lib "dw_gui.dll" version 150 successfully loaded
     shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01                      <
DpShMCreate: sizeof(wp_adm)          22968     (1044)
DpShMCreate: sizeof(tm_adm)          3642120     (18120)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Apr 02 11:53:30 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6916 Ended         no      1   0        0
1 DIA     7724 Ended         no      1   0        0
2 DIA     6044 Ended         no      1   0        0
3 DIA     4300 Ended         no      1   0        0
4 DIA     6992 Ended         no      1   0        0
5 DIA     2412 Ended         no      1   0        0
6 DIA      432 Ended         no      1   0        0
7 DIA     8168 Ended         no      1   0        0
8 DIA     5420 Ended         no      1   0        0
9 DIA     9712 Ended         no      1   0        0
10 UPD     4320 Ended         no      1   0        0
11 ENQ     3476 Ended         no      1   0        0
12 BTC     2676 Ended         no      1   0        0
13 BTC     6816 Ended         no      1   0        0
14 BTC     9636 Ended         no      1   0        0
15 BTC     8356 Ended         no      1   0        0
16 BTC     7004 Ended         no      1   0        0
17 BTC     7284 Ended         no      1   0        0
18 BTC    10048 Ended         no      1   0        0
19 BTC     4560 Ended         no      1   0        0
20 BTC     4196 Ended         no      1   0        0
21 SPO     4268 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          7
wake_evt_udp_now     0
wake events           total     3, udp     3 (100%), shm     0 ( 0%)
since last update     total     3, udp     3 (100%), shm     0 ( 0%)
Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
Vadi

Hi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi

This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?

This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?

Hi Fred,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

ST-PI 2008_1_700 upgrade fails on Lower Level SP

Hello all,
We are trying to upgrade our ST-PI component for an ECC 6.0 EhP4 SPS 06
system for end result of connecting/ being managed by our SolMan EhP1 SP25 SLM
system
Current: ST-PI 2005_1_700 SP06
Target: ST-PI 2008_1_700 SP03
The error we receive is: Request/task SAPKA70001 does not exist
We are currently on:
SAP_ABA 701 0006 SAPKA70106
SAP_BASIS 701 0006 SAPKB70106
We are on EhP4 SPStack 06 on most components in the managed system, our Solution Manager is EhP1 SP25
I have tried using KITLRDA (install), KITLRDG (supplement upgrade) and
the main one KITLRDB (upgrade) and all fail or KITLRDG is not
recognized at all.
All with KITLRD1, KITLRD2, KITLRD3
Steps taken:
Tcode SAINT
Load packages KITLRDB, KITLRD1, KITLRD2, KITLRD3 in SAINT OCS queue
Select target KITLRD3 003 > KITLRDB 000
Continue-->
Error: Request/task SAPKA70001 does not exist
During phase ADDON_CONFLICTS_?
Have already entered a SAP message, and there is no information on this error anywhere I can find. Any help resolving this and moving forward with my add-on upgrade would be appreciated.
Thank you

Hi
since you already have add on ST-PI 2005_1_700, please proceed with the delta upgrade cd for ST-PI 2008_1, and apply the latest patch for the same
Please refer SAP Note 1228898 - Installation/delta upgrade of ST-PI 2008_1.
as per that you could use SAPKITLRDB KITLRDB.CAR please check
Jansi

Mail Upgrade Failed. Launch mail assistant. Mail index damaged. Says it will repair when mail is launched but it never does repair it. Any idea why this is happening?

I downloaded Yosemite to upgrade from IOS 10.6.8. Mail will not work. It says the upgrade failed and to launch the mail assistant. Then the next message says mail index has been damaged. To repair it quit Mail. It will be repaired the next time you launch mail. However, this never works. I tried recovery and downloaded the software again but the same thing happened. Any ideas how to fix this?

I have the same thing happening. Everything else seems to be working fine, except i can't open my mac mail at all! it seems to be in a loop and won't let me retrieve any mail or even try to send mail before migrating, but it fails and then its back to the beginning and the same loop continues, so no mac mail working. I also came from 10.6.8 to 10.10
jane

IPad IOS6 upgrade failed, iPad is now frozen

My iPad is 3rd generation, and I run iTunes (latest version) on a Windows 7 laptop.
Initially I chose to 'download only' in iTunes. Subsequently I started the upgrade process with the iPad connected to iTunes.
I got an error message saying the upgrade failed.
Now my iPad is showing the symbol to connect with USB cable to iTunes, but the iPad is not appearing in iTunes.
I've gone through the trouble shooting guide (checking versions, restarting computer etc.).
If I try to restart my iPad (pressing on/off and homebutton simultanously for 10 secs) it simply turns off the screen, and when I turn it on it displays the same again.

Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

Failed to send request/response to peer. send() failed with error code 32?

hello, chris:
recently we check the tterros.log, we found the following erros:
2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32
2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(3048): TT16121: Failed to flush transaction queue. Restarting log read loop
2009-11-12 12:08:14.19 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32
2009-11-12 12:08:14.19 Err : REP: 893538: OCEDATA:transmitter.c(3048): TT16121: Failed to flush transaction queue. Restarting log read loop
what does these mean?? Does this have any effect on replication?? thank you ...

These messages indicate a loss of connectivity between the replication agents. This could be due to one some kind of failure (e.g. network issue). If the messages are infrequent and replication is otherwise working okay they are not a big cause for concern though if I were you I would check the network etc. for anything abnormal.
Chris

SCSM 2010 to 2012 Management server upgrade failed

I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30   Always:   Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites:        Logic Type:and   AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites:    Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites:        Logic Type:and   RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   PowerShell2Check-err: 0
02:49:36:CheckPrerequisites:        Logic Type:or   PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites:        Logic Type:and   ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.C

Jeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb

500 Internal Server Error Failed to process request in portal

Hi ,* We face problems to run Dev and Qual systems on our Sap portal devices. Production is OK The error message (see hereafter) does not occur on welcome page but on any page that communicate by Web Dynpro with ECC SAP system 500 Internal Server Error SAP NetWeaver Application Server 7.00/Java AS 7.00 Failed to process request. Please contact your system administrator. [Hide] Error Summary While processing the current request, an exception occured which could not be handled by the application or the framework. If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, ... com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WS metadata destination 'SSOL_WS_METADATA_DEST' and WS interface 'ZGetListCustomerAgent'. One possible reason is that the metadata destination 'SSOL_WS_METADATA_DEST' has not been properly configured; check configuration. at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:440) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:372) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:342) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:326) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo$Cache.getModelInfo(WSModelInfo.java:199) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:1035) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:248) at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModel.(WSTypedModel.java:41) at com.bluestarsilicones.ssol.models.customer.WS_GetListCustomersForAgentModel.(WS_GetListCustomersForAgentModel.java:53) at com.bluestarsilicones.ssol.wd.ordercreation.OrderCreationComponent.initalListCustomerAgentModel(OrderCreationComponent.java:587) at com.bluestarsilicones.ssol.wd.ordercreation.OrderCreationComponent.initalModels(OrderCreationComponent.java:555) at com.bluestarsilicones.ssol.wd.ordercreation.OrderCreationComponent.wdDoInit(OrderCreationComponent.java:193) at com.bluestarsilicones.ssol.wd.ordercreation.wdp.InternalOrderCreationComponent.wdDoInit(InternalOrderCreationComponent.java:943) at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108) at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215) at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200) at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430) at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73) at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869) at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229) at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344) at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356) at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549) at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:193) at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150) at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108) at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215) at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200) at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430) at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details. at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:157) at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.(DGenericServiceImpl.java:56) at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:88) at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:141) at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:429) ... 60 more Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Proxy generation problem. See nested exception. at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:284) at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:154) ... 64 more Caused by: java.io.IOException: Compilation fails... Compilation process error : Not enough space at com.sap.engine.services.webservices.jaxrpc.util.Compiler.compile(Compiler.java:53) at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compileExternal(PackageBuilder.java:328) at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.traversThrough(PackageBuilder.java:291) at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compileExternal(PackageBuilder.java:485) at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compilePackage(PackageBuilder.java:215) at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:271) ... 65 more Thanks for your help. TY.

Hi,
I think you are accessing the portal via one of the dialog instance and not using the Central instance.So you are not getting the error displayed in iview. If you want to activate navigate to system administration-system configuration-services and in portal runtime central configuration open the object and in portal .runtime .print cause .exception make it to true and restart the service. This may be for print but some where here in the services you can activate that.
For productive environment detailed exception is not recommended.Administrator can see the error log in
log files.
Thanks and regards,
gopal.sattiraju

On Windows 7 PC, got the "upgrade iTunes" notice, said sure, but the upgrade failed, now I can't access iTunes "invalid permissions"

On Windows 7 PC, got the "upgrade iTunes" notice this morning, said sure, but the upgrade failed, now I can't access iTunes "invalid permissions"
I wasn't paying attention so I don't know the precise error I got on the upgrade failure.
All other iTunes upgrades have been fine...no brainers. Done several on this W7 PC.
If I re-download and install a fresh iTunes I assume I will lose my library...true? Can I find and save off my library so I don't have to "discover" all my music which is scattered all over the PC and a 1T attached USB drive.
Or is there some way to get the iTunes upgrade to successfully restart and install correctly?
Help!

Hello there, Konami84.
The following Knowledge Base article provides some recomendations for troubleshooting:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

500 Internal Server Error Failed to process request. in ESS Travel req form

Dear Gurus ,
Please can someone help me out here....I have problem
for my ESS and MSS portal, but when I click on TRAVEL AND EXPENSES, and go
down to MY TRIPS and EXPENSES, I sure get to see all the Travel Requests I
have created, but when click on DISPLAY/PRINT, I get this error message
below....Any form of assistance would be grately appreciated.
Display Trip Form
500 Internal Server Error SAP NetWeaver Application Server 7.00/Java
AS 7.00
Failed to process request. Please contact your system administrator.
also i have restart the EP portal server and also check the master data and ADS services ,all are ok kindly check and do the needful why this error is coming in ESS portal
Thanks and regards
RS

Hi,
Move this issue to BASIS forum you will get the good solution on this.
Regards
Shayam

Upgrade failed, continuous loop requesting restart

Similar Messages

Maybe you are looking for