Upgrade Failed in WAE's from 4.1.5f to ver 4.2.3c with SSL Error.

Hi all,
I am in the process upgarding the OS from 4.1.5f to 4.2.3c . There was no issue upgarding the central manger.
While upgarding the other WAE's from the CM and also from the CLI there is an Alarm as below.
        Alarm ID                 Module/Submodule               Instance
   1 mstore_key_retrieval      cms                          ssl_mstore_key
   2 mstore_key_failure        sslao                        mstore_key_failure
Also the central manager shows that devices offline.
Thanks for your help
Dhana

Hi Dhana,
Please apply following commands from CLI on the WAEs that are hsowing up this error:
1. cms disable on WAE. commnd: CM deregister OR CMS deregister force
2. delete the device from CM
4.Apply following commands to WAE:
WAE-674-1(config)#no accelerator ssl  enable
Disabled ssl accelerator.
WAE-674-1(config)#end
WAE-674-1#crypto pki managed-store initialize
All certificate/private keys in SSL managed store will be deleted and optimized SSL traffic will be interrupted. Are you sure you want to continue(yes/no)? [no]:yes
SSL managed store token file not present. Continuing with deletion of certificates in SSL managed store
Restarting SSL accelerator. Done.
WAE-674-1#conf t
WAE-674-1(config)# accelerator ssl  enable
Enabled ssl accelerator
WAE-674-1(config)#cms enable
Hope this helps.
Regards.
PS: Please mark this Answered, if it resolves the issue.

Similar Messages

  • HT202159 Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game

    Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game

    Hi aaronvilla,
    Sorry to hear you are having issues with your iTunes Store purchase.   The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Hope this helps ....
    - Judy

  • DCA-40002: Failed to read WSDL from xsd

    Hi,
    I am a newbie to JDeveloper, we are using Oracle JDeveloper 11g to consume a web service from PeopleSoft 9.0.
    We have a WSDL based on a PeopleSoft Component Interface. We can view the wsdl document through the PeopleSoftServiceListeningConnector URL and it appears ok.
    However, when we create a new Web Service Data Control in JDeveloper, it presents us with the following error:
    DCA-40002: The WSDL document is invalid due to the following reason: java.io.IOException: Failed to read WSDL from
    http://machine:port/PSIGW/PeopleSoftServiceListeningConnector/M999999.V1.xsd:
    HTTP connection error code is 500.
    Any advice would be appreciated.
    Thanks in advance.
    Regards,
    Dan

    Hi, after 1 1/2 years you can assume the thread to be closed. So please open your own thread and make sure the WSDL file is accessible from a browser URL.
    Frank

  • Failed to get dispatch from IBrwsr2! PHTML is null!

    Anyone figure out why this is happening?  So frustrating: - (

    Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11.  I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it.  I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
    Error message is FAILED TO GET DISPATCH FROM IBRWSR2.  Then when you click on it the next error message says:  PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
    Does anyone have a solution since Adobe will not respond?
    As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI.  Any ideas?
    JimP08758

  • ISE Upgrade Fails from 1.1.0 to 1.1.2.145

    Hi,
    I am trying to upgrade ISE from 1.1.0 to 1.1.2.145 but failed. Find the details below.
    DR-ise-pdp-01/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz ISE1
    Save the current ADE-OS running configuration? (yes/no) [yes] ?
    Generating configuration...
    Saved the ADE-OS running configuration to startup successfully
    Initiating Application Upgrade...
    Stopping ISE application before upgrade...
    Running ISE Database upgrade...
    % Application upgrade failed. Please check logs for more details.
    Regards

    Hi,
    Try to go to v1.1.1 first, add patch 3 and then go to v1.1.2.
    From ISE relaese notes:
    Upgrade from Cisco ISE, Release 1.1.1 to release 1.1.2
    Before you can upgrade to Cisco ISE, Release 1.1.2, you must first be sure you have upgraded your machine to Cisco ISE, Release 1.1.1 with patch 3 applied. For specific instructions on performing the upgrade procedure, see the Cisco Identity Services Engine Upgrade Guide, Release 1.1.x.
    HTH

  • Problem upgrading WAE 512 from 4.1.5f to 4.2.3

    Hi guys,
    I've just upgraded a wae 512 from version 4.1.5f  to 4.2.3 using the Rescue CD but after the installation the CLI shows me an error:
    No directory /local/local1!
    Logging in with home = "/".
    System Initialization Finished.
    Disk based software not installed.
    Some applications may not run correctly!
    show version command:
    CORE#sh ve
    Cisco Wide Area Application Services Software (WAAS)
    Copyright (c) 1999-2010 by Cisco Systems, Inc.
    Cisco Wide Area Application Services Software Release 4.2.3 (build b7 Jul 29 201
    0)
    Version: UNKNOWN-PRODUCT-4.2.3.7
    Compiled 01:16:47 Jul 29 2010 by damaster
    Device Id: 00:14:5e:95:ef:67
    System was restarted on Wed Sep 22 15:30:32 2010.
    The system has been up for 5 minutes, 37 seconds.
    I can't access interface giga and ohter commands neither. I really appreciate your help
    Thanks in advance
    Lenin

    Dear smnambia,
    i have problem the Wae 512 RMA can't booting stack at disk-100: disk apply.
    and i follow how to use rescue CD
    Enter the following option in sequence
    2,3,5,8 and 9
    for number 2,3,5 is normally,
    but when i wipe disk and press yes.
    Installer Main Menu:
        1. Configure Network
        2. Manufacture flash
        3. Install flash cookie
        4. Install flash image from network
        5. Install flash image from usb/cdrom
        6. Install flash image from disk
        7. Recreate RAID device (WAE-674/7341/7371/7541/7571/8541 only)
        8. Wipe out disks and install .bin image
        9. Exit (reboot)
    Choice [0]: 8
    Using cd-rom device (/dev/scd0)
    Enter full URL of .bin image to install.
       ftp://[user:pass@]ip_addr/path/to/file
      http://[user:pass@]ip_addr/path/to/file
      file:/local/path/to/to/file
    URL for .bin image [file:/media/images/waas-universal-4.4.1.12-k9.bin]:
    Continue?  This will wipe out all disks! [n]: y
    unmount device (/dev/scd0)
    Scro
    and nothing happen for a long time. its normal??
    how long when we wipe the disk?

  • RV220W - Upgrade failed when upgrading to 1.0.4.17 from 1.0.1.0

    I am a router newbie.  I have a RV220W running 1.0.1.0.
    When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
    I found this article: https://supportforums.cisco.com/message/3437182#3437182
    I assume I have to do a factory reset then an upgrade in order to upgrade properly.
    If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0?  I'm trying to avoid configuring the router manually all over again. 

    Hi bpattersoncisco, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for this issue you are having updating your device, you are right; in this case you can follow these steps:
    1) Create a backup of your configuration.
    2) Perform a factory reset.
    3) Update your device with the last firmware version.
    4) Perform a factory reset again in order to complete the process.
    5) Upload your previous configuration.
    This process will update your firmware and you will save your time with the configuration. I hope you find this answer useful,
    *Please mark the question as Answered or rate it so other users can benefit from it"
    Greetings,
    Johnnatan Rodriguez Miranda.
    Cisco Network Support Engineer.

  • Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upg

    Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upgrade from? So now I have spent lots $$ and nothing working. Why is this so complicated? what do I need to do?

    Hi Rave,
    Thanks for this; my issue is that I have now supposedly purchased a retail version of Acrobat X1 (i.e just spent more $$, after the upgrade attempt  to Acrobat X1 failed), and while this feigns an OK install, it fails in someway to override the "Upgrade Acrobat X1 version".  E.G. once I load up to read an acrobat file the "upgrade version" executes/intercepts and ask for serial numbers and check for a previous qualifying version which I do not have, (BUT what I do have is the current retail version of acrobat X1 which is not recognised)
    Do I need to uninstall and start over again? (I am reluctant to do this as I am sure serial number issues will arise, as I assume downloaded file will be cleaned up etc, and I am not spending more money trying again!)
    Any suggestions?

  • Hi. I'm trying to upgrade my 3G iPad 1 software from 3.2.2 to 5.0.1. iTunes tells me to upgrade. It then backs up my iPad Ok but it won't 'restore'. Thus the upgrade fails. Does anyone have any suggestions please?

    Hi. I'm trying to upgrade my 3g iPad 1 software from 3.2.2 to 5.0.1.   iTunes tells me that I need to upgrade.  It then backs up my iPad OK. But then it won't 'restore' and the upgrade fails.
    Does anyone have any suggestions, please.
    Thanks - Dafyd

    The version of iTune for the Mac is not capable of running on an iPad.

  • ITunes upgrade failed on Vista  PC,  I now have no Itunes

    I had a working installation of Itunes and Quicktime on my Vista PC. The only problem was on each launch I was greeted with a message that a new version was available and presented with an option to upgrade. The upgrade always failed with a message that I should try the stand-alone installer. Also failed to upgrade. I uninstalled ITunes (from add/remove SW) hoping a new install would be the answer. Unistall worked fine. Itunes is gone.
    New install does not succeed. It ends on a message:
    “Error getting file security: C:\ProgramData\Apple\Computer\Installer Cache\Quicktime 7.55.90.70\ GetLastError:5”
    Followed by “Rolling Back Actions” and “The Installation of Quicktime did not complete successfully. iTunes requires QuickTime.”
    I have a working installation of QuickTime version 7.5.5. It opens without error from the default install location. However, attempts to ‘Update Existing Software’ fail with the same “Error getting file security…” message and “Rolling back…” message. Same response on attempting to uninstall QuickTime from Add/Remove Software.
    Where I previously had a working version of iTunes with only an annoying popup message, I now have no iTunes at all. I do have a working down rev QuickTime (that I cannot remove) but that is of no use to me without iTunes.
    I need help to remove QuickTime so I can proceed from ground zero. I assume this is likely a Windows registry issue. I am competent to maker registry edits but not by trial and error. I need more knowledgeable advice on how to proceed.
    Thanks

    Just a thought, but maybe consider returning the device.  Seems it might be a bit too complicated for you.

  • Upgrade fails at phase STARTSAP_TRANS

    We are upgrading to NW2004s (ABAP only)
    <u><b>How to re-start the shadow instance?</b></u>
    At this point, <b>anyway we cannot start the shadow instance.</b>
    At SAPMMC, the disp+work
    1) first show "running but the dialog queue standstill"
    2) then show" running but not connected to the message server"
    3) then the disp+work dies.
    Above happens in 1 minute after re-start.
    <b>The dev_ms reads:
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 4740] Mon Apr 02 15:07:53 2007
    [Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    94
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2932
    [Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c   1824]
    [Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
    [Thr 4740] MsGetOwnIpAddr: my host addresses are :
    [Thr 4740]   1 : [10.10.10.68] houston (HOSTNAME)
    [Thr 4740]   2 : [127.0.0.1] houston.monet.local (LOCALHOST)
    [Thr 4740] Mon Apr 02 15:07:54 2007
    [Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
    [Thr 4740] HTTP logging is switch off
    [Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
    [Thr 4740] ms/icf_info_server : deleted
    [Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
    [Thr 4740] CUSTOMER KEY: >B0790292062<
    [Thr 4740] Mon Apr 02 15:08:54 2007
    [Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requested from houston_XYZ_60 [msxxserv.c   4679]
    [Thr 4740] Mon Apr 02 15:19:35 2007
    [Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c   3165]
    [Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c   3169]</b>
    The dev_disp reads:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      60
    sid        XYZ
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    95
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        4036
    Mon Apr 02 15:07:53 2007
    kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 95 successfully loaded
         shared lib "dw_xtc.dll" version 95 successfully loaded
         shared lib "dw_stl.dll" version 95 successfully loaded
         shared lib "dw_gui.dll" version 95 successfully loaded
         shared lib "dw_mdm.dll" version 95 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Mon Apr 02 15:07:58 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >houston_XYZ_60                         <
    DpShMCreate: sizeof(wp_adm)          19888     (904)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1280)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 05BF0040, size: 4240712)
    DpShMCreate: allocated sys_adm at 05BF0040
    DpShMCreate: allocated wp_adm at 05BF1A28
    DpShMCreate: allocated tm_adm_list at 05BF67D8
    DpShMCreate: allocated tm_adm at 05BF6808
    DpShMCreate: allocated wp_ca_adm at 05F66A98
    DpShMCreate: allocated appc_ca_adm at 05F6B0E8
    DpShMCreate: allocated comm_adm at 05F6C858
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05FED708
    DpShMCreate: allocated gw_adm at 05FED748
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05FED778
    DpShMCreate: allocated wall_adm at 05FED780
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Memory Reset disabled as NT default
    <ES> 2039 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12314]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c   11663]
    DpStartStopMsg: send start message (myname is >houston_XYZ_60                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 95
    Release check o.K.
    Mon Apr 02 15:08:38 2007
    ERROR => W0 (pid 1084) died [dpxxdisp.c   14318]
    ERROR => W1 (pid 4200) died [dpxxdisp.c   14318]
    ERROR => W2 (pid 3316) died [dpxxdisp.c   14318]
    ERROR => W3 (pid 5276) died [dpxxdisp.c   14318]
    ERROR => W4 (pid 5348) died [dpxxdisp.c   14318]
    ERROR => W5 (pid 3436) died [dpxxdisp.c   14318]
    ERROR => W6 (pid 3920) died [dpxxdisp.c   14318]
    ERROR => W7 (pid 4868) died [dpxxdisp.c   14318]
    ERROR => W8 (pid 5380) died [dpxxdisp.c   14318]
    ERROR => W9 (pid 4584) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1f --> 0x1e
    ERROR => W10 (pid 4188) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1e --> 0x1c
    ERROR => W11 (pid 2700) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1c --> 0x18
    ERROR => W12 (pid 4604) died [dpxxdisp.c   14318]
    ERROR => W13 (pid 4916) died [dpxxdisp.c   14318]
    ERROR => W14 (pid 4440) died [dpxxdisp.c   14318]
    ERROR => W15 (pid 4544) died [dpxxdisp.c   14318]
    ERROR => W16 (pid 1888) died [dpxxdisp.c   14318]
    ERROR => W17 (pid 548) died [dpxxdisp.c   14318]
    ERROR => W18 (pid 2800) died [dpxxdisp.c   14318]
    ERROR => W19 (pid 2080) died [dpxxdisp.c   14318]
    ERROR => W20 (pid 2888) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x18 --> 0x10
    ERROR => W21 (pid 5572) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x10 --> 0x0
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:48 2007
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Mon Apr 02 20:08:48 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     1084 Ended         no      1   0             0                                                             
    1 DIA     4200 Ended         no      1   0             0                                                             
    2 DIA     3316 Ended         no      1   0             0                                                             
    3 DIA     5276 Ended         no      1   0             0                                                             
    4 DIA     5348 Ended         no      1   0             0                                                             
    5 DIA     3436 Ended         no      1   0             0                                                             
    6 DIA     3920 Ended         no      1   0             0                                                             
    7 DIA     4868 Ended         no      1   0             0                                                             
    8 DIA     5380 Ended         no      1   0             0                                                             
    9 DIA     4584 Ended         no      1   0             0                                                             
    10 UPD     4188 Ended         no      1   0             0                                                             
    11 ENQ     2700 Ended         no      1   0             0                                                             
    12 BTC     4604 Ended         no      1   0             0                                                             
    13 BTC     4916 Ended         no      1   0             0                                                             
    14 BTC     4440 Ended         no      1   0             0                                                             
    15 BTC     4544 Ended         no      1   0             0                                                             
    16 BTC     1888 Ended         no      1   0             0                                                             
    17 BTC      548 Ended         no      1   0             0                                                             
    18 BTC     2800 Ended         no      1   0             0                                                             
    19 BTC     2080 Ended         no      1   0             0                                                             
    20 BTC     2888 Ended         no      1   0             0                                                             
    21 SPO     5572 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Mon Apr 02 20:08:48 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    1
    2000
    1
    1
    --------++++--
    +
    DIA
    3
    3
    2000
    3
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          7
    wake_evt_udp_now     0
    wake events           total     3,  udp     3 (100%),  shm     0 (  0%)
    since last update     total     3,  udp     3 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:               Mon Apr 02 20:08:48 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Apr 02 20:08:48 2007
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:53 2007
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >houston_XYZ_60                         < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (2072) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:2072  HANDLE:1580)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:54 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:2072  HANDLE:1580)
    DpStartStopMsg: send stop message (myname is >houston_XYZ_60                         <)
    NiIMyHostName: hostname = 'houston'
    AdGetSelfIdentRecord: >                                                                           <
    XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Mon Apr 02 15:08:55 2007
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11976]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1488 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1488 (pos=2)
    SiSelNRemove: removed sock 1488
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1488
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c   10333]
    Good Bye .....
    <b>The dev_w21 reads:
    trc file: "dev_w21", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon Apr 02 15:08:01 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
    B  Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
    B  Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
    B  New connection 0 created
    M sysno      60
    M sid        XYZ
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    95
    M intno      20050900
    M make:      multithreaded, ASCII, optimized
    M pid        5572
    M
    M  kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c   1301]
    I 
    I Mon Apr 02 15:08:02 2007
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          19888     (904)
    M  DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1280)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 063F0040, size: 4240712)
    M  DpShMCreate: allocated sys_adm at 063F0040
    M  DpShMCreate: allocated wp_adm at 063F1A28
    M  DpShMCreate: allocated tm_adm_list at 063F67D8
    M  DpShMCreate: allocated tm_adm at 063F6808
    M  DpShMCreate: allocated wp_ca_adm at 06766A98
    M  DpShMCreate: allocated appc_ca_adm at 0676B0E8
    M  DpShMCreate: allocated comm_adm at 0676C858
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 067ED708
    M  DpShMCreate: allocated gw_adm at 067ED748
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 067ED778
    M  DpShMCreate: allocated wall_adm at 067ED780
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 21 initializing ....
    X  Using implementation view
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host houston
    M 
    M Mon Apr 02 15:08:03 2007
    M  calling db_connect ...
    C  Thread ID:4020
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      87
    C    patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
    C  np:(local) connection used on houston
    C  CopyLocalParameters: dbuser is 'XYZ_shd'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Provider Release:9.00.1399.06
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Can't use MARS (on sql 8.0).  Reconnecting without MARS functionality.
    C  Using Provider SQLNCLI
    C  Provider Release:9.00.1399.06
    C  Using Provider SQLNCLI
    C  CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
    C  sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
    C  Procname: [CheckCodepageType -- no proc]
    C  Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
    C  Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
    C  procedure cache created/attached
    C  PSP: 0 procedure names registered
    C  Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
    C  pn_id:houston_XYZXYZ_XYZ_SHD
    C  Not using MARS (on sql 8.0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070402 150803 houston       
    C  The IRow interface is supported by this OLEDB provider
    C  sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
    C  Procname: [##YshoustonXYZ00000055720000000001150803]
    C  sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
    C  Procname: [##YshoustonXYZ00000055720000000001150803]
    C  ParamStmtExec failed.  HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP      1 VERSION FROM SVERS ]
    C  Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
    C  DbSlRead - Error 103 (dbcode 208) on open
    C  DbSlRead - <##YshoustonXYZ00000055720000000001150803>
    C  DbSlRead - Error 103 (dbcode 208) on fetch
    C  DbSlRead - <##YshoustonXYZ00000055720000000001150803>
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#3 @ 1299] [dblink  1299 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1426]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]
    M 
    M  Info for wp 21
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_SPOWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server houston_XYZ_60 on host houston (wp 21)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Apr 02 15:08:03 2007
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10439
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c   327]</b>
    On SDN there are many discussions about similar errors but none
    of them fits our situation.
    Please give your advice. Points will be given.
    Thanks!

    What is the Kernel level you are using.   Try using kernel above 75.

  • Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

    Hello,
    Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
    Error Message:
    SYSTEM START failed, code -1
                 -1: 'startsap.exe' returned an error
                 See file 'D:\usr\sap\put\log\R3up.ECO' for details.
    R3up.ECO:
    SAPup>  Starting subprocess startsap.exe with id 5844 at 20080402142258
    EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
    Environment: dbms_type=mss
    Environment: dbs_mss_schema=cdu
    STARTSAP failed
    Details are written to D:\usr\sap\put\tmp\startSID.log
    Process with ID 6276 terminated with status -1
    startSID.log
    running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
    SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
         msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
         disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
         igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
    D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
    It is trying to start the shadow instance and failing by ending all the work process
    DEV_DISP:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        SID
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    150
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        5348
    Wed Apr 02 17:22:10 2008
    kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
    length of sys_adm_ext is 364 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
         shared lib "dw_xml.dll" version 150 successfully loaded
         shared lib "dw_xtc.dll" version 150 successfully loaded
         shared lib "dw_stl.dll" version 150 successfully loaded
         shared lib "dw_gui.dll" version 150 successfully loaded
         shared lib "dw_mdm.dll" version 150 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Wed Apr 02 17:22:22 2008
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
    Wed Apr 02 17:22:40 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5373]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >HOSTNAME_SID_01                      <
    DpShMCreate: sizeof(wp_adm)          22968     (1044)
    DpShMCreate: sizeof(tm_adm)          3642120     (18120)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
    DpShMCreate: allocated sys_adm at 05560040
    DpShMCreate: allocated wp_adm at 05561B30
    DpShMCreate: allocated tm_adm_list at 055674E8
    DpShMCreate: allocated tm_adm at 05567518
    DpShMCreate: allocated wp_ca_adm at 058E0820
    DpShMCreate: allocated appc_ca_adm at 058E4E70
    DpShMCreate: allocated comm_adm at 058E65E0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05967490
    DpShMCreate: allocated gw_adm at 059674D0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05967500
    DpShMCreate: allocated wall_adm at 05967508
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2039 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
    DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 150
    Release check o.K.
    Wed Apr 02 17:23:20 2008
    my types changed after wp death/restart 0x1f --> 0x1e
    my types changed after wp death/restart 0x1e --> 0x1c
    my types changed after wp death/restart 0x1c --> 0x18
    my types changed after wp death/restart 0x18 --> 0x10
    my types changed after wp death/restart 0x10 --> 0x0
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:30 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Apr 02 11:53:30 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     6916 Ended         no      1   0        0                                                                         
    1 DIA     7724 Ended         no      1   0        0                                                                         
    2 DIA     6044 Ended         no      1   0        0                                                                         
    3 DIA     4300 Ended         no      1   0        0                                                                         
    4 DIA     6992 Ended         no      1   0        0                                                                         
    5 DIA     2412 Ended         no      1   0        0                                                                         
    6 DIA      432 Ended         no      1   0        0                                                                         
    7 DIA     8168 Ended         no      1   0        0                                                                         
    8 DIA     5420 Ended         no      1   0        0                                                                         
    9 DIA     9712 Ended         no      1   0        0                                                                         
    10 UPD     4320 Ended         no      1   0        0                                                                         
    11 ENQ     3476 Ended         no      1   0        0                                                                         
    12 BTC     2676 Ended         no      1   0        0                                                                         
    13 BTC     6816 Ended         no      1   0        0                                                                         
    14 BTC     9636 Ended         no      1   0        0                                                                         
    15 BTC     8356 Ended         no      1   0        0                                                                         
    16 BTC     7004 Ended         no      1   0        0                                                                         
    17 BTC     7284 Ended         no      1   0        0                                                                         
    18 BTC    10048 Ended         no      1   0        0                                                                         
    19 BTC     4560 Ended         no      1   0        0                                                                         
    20 BTC     4196 Ended         no      1   0        0                                                                         
    21 SPO     4268 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    1
    2000
    1
    1
    --------++++--
    +
    DIA
    3
    3
    2000
    3
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          7
    wake_evt_udp_now     0
    wake events           total     3,  udp     3 (100%),  shm     0 (  0%)
    since last update     total     3,  udp     3 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:35 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (1860) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:1860  HANDLE:1448)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:36 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1860  HANDLE:1448)
    DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
    NiIMyHostName: hostname = 'HOSTNAME'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Wed Apr 02 17:23:37 2008
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1356 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1356 (pos=2)
    SiSelNRemove: removed sock 1356
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1356
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
    Good Bye .....
    Please help me in resolving this issue
    Thanks,
    Vadi

    Hi Suhas,
    Have checked the hostname and it is correct.
    I am getting the below output When i run r3trans -x
    This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
    r3trans finished (0000).
    I could see the below error message in dev_W21
    ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
    C  sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 'cdu_shd' failed -- connect terminated
    C  failed to establish conn. 0
    Thanks,
    Vadi

  • SCSM 2010 to 2012 Management server upgrade failed

    I upgrading my scsm 2010 to 2012 both Management and DW server.
    So i have set up the secondary lab environment and do this.
    The DW server has been upgraded successfully to 2012.
    When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
    Log as below.
    2014-08-26T14:48:28.7717429+05:30    Always:    Trace Session Started
    02:48:28:
    02:48:28:Application Started
    02:48:28:This is 64-bit application.
    02:48:28:Product ID  is NOT installed
    02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
    02:48:28:Found SMServer components
    02:48:28:Found SMConsole components
    02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
    02:48:28:Using local Analysis server as default instance
    02:48:28:Using 'DWASDataBase' as default Analysis server database name
    02:48:28:Using 'Default' as default Analysis server database file path
    02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
    02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
    02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
    02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
    02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
    02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
    02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
    02:48:29:All vital setup files found.
    02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
    02:48:29:Checking dependencies for Server upgrade...
    02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
    02:48:42:Datawarehouse is up-to-date
    02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
    02:48:42:[GetManagementGroupPropertiesFromDB]:  Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
    02:48:42:[GetManagementGroupPropertiesFromDB]:  Found Management Group information.
    02:48:42:[GetManagementGroupPropertiesFromDB]:  Found Primary SDK server:..net.
    02:48:42:Validating SmAdminRoleGroup
    02:48:43:Checking MU OptIn state
    02:48:43:MU is not opted in
    02:48:43:Start adding DataItems
    02:48:43:System Center Service Manager Install
    02:48:44:Final Install Tasks
    02:48:44:Done adding DataItems
    02:48:46:Getting Domain List
    02:49:35:LoadPrerequisites: Start adding ComponentTitles
    02:49:35:LoadPrerequisites: Start adding DataItems
    02:49:35:Memory check
    02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
    02:49:36:Memory check
    02:49:36:Processor speed check
    02:49:36:Processor speed check
    02:49:36:Processor speed check
    02:49:36:IIS check
    02:49:36:ASP.NET check
    02:49:36:Basic Authentication check
    02:49:36:Windows Authentication check
    02:49:36:Microsoft .NET Framework 4 check
    02:49:36:Windows Service Pack check
    02:49:36:Microsoft Report Viewer Redistributable check
    02:49:36:PowerShell 2.0 check
    02:49:36:SharePoint Server 2010 check
    02:49:36:SharePoint Farm Administrator check
    02:49:36:SharePoint Server 2010 configuration check
    02:49:36:ADO.NET Data Services Update check
    02:49:36:Microsoft SQL Server 2008 Native Client check
    02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
    02:49:36:LoadPrerequisites: Done adding prerequisites checks
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Memory check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    MemoryCheck-8gbWarn: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Memory check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
    02:49:36:Entered RequiredAMO
    02:49:36:Trying alternate method of detection using Assembly.Load
    02:49:36:CheckPrerequisites:         Logic Type:and    AMO-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Microsoft SQL Server 2008 Analysis Management Objects: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    ProcessorSpeedCheck2.5MHz-Warn: 0
    02:49:36:CheckPrerequisites:         Logic Type:and    ProcessorCoreCheck2Core-Warn: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Processor speed check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    Win2k8R2Sp1Check-Err: 0
    02:49:36:CheckPrerequisites:
    02:49:36:CheckPrerequisites:                 ProductType was not a match.  Looking for: LanmanNT Found: ServerNT
    02:49:36:CheckPrerequisites:         Logic Type:or    Win2k8R2Sp1DCCheck-Err: 2
    02:49:36:CheckPrerequisites:
    02:49:36:CheckPrerequisites:                 The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
    02:49:36:CheckPrerequisites:         Logic Type:or    WinSrvrVNextCheck-Err: 2
    02:49:36:CheckPrerequisites:
    02:49:36:CheckPrerequisites:                 ProductType was not a match.  Looking for: LanmanNT Found: ServerNT
    02:49:36:CheckPrerequisites:         Logic Type:or    WinSrvrVNextDCCheck-Err: 2
    02:49:36:
    02:49:36:CheckPrerequisites:     Windows Service Pack check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
    02:49:36:Entered RequiredReportViewer
    02:49:36:CheckPrerequisites:         Logic Type:and    RptVwrCheck-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Microsoft Report Viewer Redistributable check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    PowerShell2Check-err: 0
    02:49:36:CheckPrerequisites:         Logic Type:or    PowerShell2Check32-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     PowerShell 2.0 check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
    02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    02:49:36:Found version 3.5.30729.5420
    02:49:36:CheckPrerequisites:         Logic Type:and    ADODotNetDataServicesHotfix-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     ADO.NET Data Services Update check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    SQLNCLI10-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Microsoft SQL Server 2008 Native Client check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:37:CheckPrerequisites: Return Value 0
    02:49:39:Doing Pre-Upgrade checks...
    02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
    02:49:39:Validating SQL Instance TESTSER
    02:49:39:SQL Server: TESTSER
    02:49:39:SQL Server version: 10.50.1600.1
    02:49:39:Full text search installed: True
    02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
    02:49:39:Stopping Service OMSDK on server
    02:49:39:Starting Service OMSDK on server
    02:49:41:Stopping Service OMCFG on server
    02:49:44:Starting Service OMCFG on server
    02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
    02:49:47:Checking for available free disck space
    02:49:47:Checking directory write access
    02:49:47:*** Pre-Upgrade checks passed ***
    02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
    02:49:47:SetProgressScreen: StartMinorStep.
    02:49:47:statusUpdate: Resetting progress bar.
    02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor.  Launching it now.
    02:49:47:SetProgressScreen: Init MSI Install progress.
    02:49:47:statusUpdate: Resetting progress bar.
    02:49:47:LaunchMsi: Msi mutex is not in use.
    02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
    02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
    02:49:47:LaunchMSI:  Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
    02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode.  Setting the external UI.
    02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
    02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
    02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
    02:50:09:Install Progress - (ProcessComponents) Updating component registration
    02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
    02:50:10:Install Progress - (StopServices) Stopping services
    02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
    02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
    02:50:17:Install Progress - (RemoveFiles) Removing files
    02:50:17:Install Progress - (CreateFolders) Creating folders
    02:50:17:Install Progress - (InstallFiles) Copying new files
    02:50:30:Install Progress - (_CreateDatabase) Creating Database
    02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
    02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
    02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
    02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
    02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
    02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
    02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
    02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
    02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
    02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
    02:52:26:Install Progress - (RegisterUser) Registering user
    02:52:26:Install Progress - (RegisterProduct) Registering product
    02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
    02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
    02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
    02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
    02:52:26:Install Progress - (PublishFeatures) Publishing product features
    02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
    02:52:26:Install Progress - (PublishProduct) Publishing product information
    02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
    02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
    02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
    02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
    Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
    02:57:44:Install Progress - (Rollback) Rolling back action:
    02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
    02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
    02:57:44:Install Progress - (Rollback) Rolling back action:
    02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
    02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
    02:58:43:LaunchMSI: Setting rollback to true
    02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
    02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install.  We did not launch the post process delegate.
    02:58:43:SetProgressScreen: FinishMinorStep.
    regards Sundaresan.C

    Jeremiah,
    We ran into this as well. One of two options:
    1.) Just run a repair on the SQL Server installation
    2.) Repair the WMI settings on the SQL Server as descibed here:
    http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
    bb

  • CUCM 8.6.2 to 9.1.2 Upgrade fails

    I am trying to complete an upgrade of CUCM 8.6.2 to 9.1.2 however the upgrade fails at the very end - I have attempted this 4 times in various different ways from using SFTP to local media I get the following error;
    HWModel=7835I3
    CPUCount=1
    CPUType= Intel(R) Xeon(R) CPU           E5504  @ 2.00GHz
    CPUSpeed=2000
    MEMSize=4096
    BIOSVer=IBMCorp. -[D6E150CUS-1.11]- 02/08/2011
    ObjectId=1.3.6.1.4.1.9.1.585
    OSVersion=UCOS 5.0.0.0-2
    SerialNumber= ********
    VendorOID=1.3.6.1.4.1.2]|<LVL::Info>
    05/17/2014 13:54:49 upgrade_install.sh|Cleaning up download...|<LVL::Info>
    05/17/2014 13:54:49 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
    05/17/2014 13:54:49 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
    05/17/2014 13:54:51 upgrade_install.sh|Removing /common/download/9.1.2.10000-28>
    05/17/2014 13:54:51 upgrade_install.sh|Started auditd...|<LVL::Info>
    05/17/2014 13:54:52 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
    05/17/2014 13:54:52 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::>
    05/17/2014 13:54:52 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
    05/17/2014 13:54:52 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000>
    05/17/2014 13:55:02 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade>
    05/17/2014 13:55:02 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
    05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock >
    05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_in_progress: Already locked b>
    05/17/2014 13:55:02 upgrade_install.sh|release_upgrade_lock: Releasing lock (pi>
    Installation of UCSInstall_UCOS_9.1.2.10000-28.sgn.iso failed
    An unknown error occurred while accessing the upgrade file.
    A system reboot is required when the upgrade process completes or is canceled. .
    I have previously used this ISO for other clients without an issue and have checked the MD5 is correct
    Has anyone else experienced this issue?
    Thanks,
    Richard

    We have got this resolved, after raising a case with TAC they identified that we were hitting the following bug;
    CSCub53409
    The detail on the bug is very limited but in our case it was caused by an issue with the numbering plan, GBNB 1.1(21) - we upgraded to the latest version 1.1(29) and the upgrade has now completed.

  • Repository upgrade fails 11.1.0.7 db -10.2.0.5 GC patchset

    Installing GridControl 10.2.0.5 on Windows 2003 Server SP2. Initial install successful of 10.2.0.2 using existing database 11.1.0.7. The database was created new to use for GC. Patchset no problems until Configuration Assitant step "Repository Upgrade" failed with errors:
    rem Copyright (c) 1999, 2009, Oracle. All rights reserved.
    oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
    oracle.sysman.emcp.oms.OmsPatchUpgrade -configureOms
    oracle.sysman.emcp.aggregates.ConfigPlugIn
    oracle.sysman.emcp.oms.StartOMS -configureOms
    oracle.sysman.emcp.oms.EMCLISetup
    oracle.sysman.ccr.configCCR.ConfigCCRPlugIn
    oracle.sysman.ccr.configCCR.ConfigRepeaterPlugIn
    Tried to find cause of errors and cannot seem to understand why this step failed.
    Considering uninstalling GC and Oracle 11g and reinstalling GC with "new database" option.
    Anyone successful at installing GC 10.2.0.5 with an 11g database?
    Thank you,
    Curt Swartzlander
    DBA

    pasinc wrote:
    Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
    You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

Maybe you are looking for