Upgrade FCE from 2.0 to 3.5

When I try to upgrade my FCE 2.0 to 3.5, the installation does not allow me to upgrade the app. It will upgrade the "helper" apps but not the FCE.
Version 2.0 runs well, no problem. And I'm using an AGP card (ATI Radeon 9600 Pro) on a dual G5, with plenty of speed and memory, as the requirements on the box state.
What am I doing wrong? Is the graphics card not "strong enough?"
Thanks.

Erased everything..started over with the Install of 3.5.
Still no go.
The installer accepts my serial number but the FCE HDapp is greyed out with the "action" labelled as "skip." Can't seem to get around it.
Soundtrack and Livetype can be installed.
Could it be that my graphics card is not Quartz "extreme?"
Merci...
Hi(Bonjour)!
All you need from your previous version is the serial
number.
It's a good idea to un-install the previous version
before installing 3.5.
see:
http://docs.info.apple.com/article.html?artnum=301182
The installer puts an entire new copy of FCE 3.5 on
your HD.
Michel Boissonneault

Similar Messages

Upgrading FCE 1 to 3.5 - on an Intel Mac

Hi all!
After much searching I'm still unsure if this is really possible - so here goes:
If I were to "persuade" FCE 1 to run on my Intel MacBook, would I be able to successfully upgrade it to FCE 3.5 by buying the upgrade software from Apple? Then would it run as a native Intel application?
Thanks!
Alastair

Hi(Bonjour)!
As FCE 3.5 update is available for any previous versions of FCE and as you'll get Soundtrack and Livetype in the package and as FCE 3.5 is universal binary (requiered for best performance on intel mac) it's worth every pennies of 99 bucks to go with 3.5 upgrade.
Michel Boissonneault

Upgrading FCE 2 to FCE HD in mid-project--asking for trouble?

I'm in the middle of a couple of FCE projects using FCE 2.0.3, OS 10.3.9, and QuickTime 6.5.
To gain SoundTrack and LiveType (I have no desire to edit in HD), I want to upgrade to FCE HD, OS 10.4.9, and QuickTime 7.
My question is, after I do the upgrades, will I be able to open these FCE 2 projects into FCE HD, and continue to edit them as usual, just as though I had created them in FCE HD? Or will I have problems trying to convert FCE 2 projects into FCE 3.5 projects like that?
Tom
G4 Quicksilver 1 GHz DP Mac OS X (10.3.9) 1.5 GB of RAM

Well, I went ahead and upgraded everything, and I am now running 10.4.9, QT 7, and FCE HD (v. 3.5).
And nothing drastic has happened; in fact there have been no serious problems at all in editing old projects in the new version. Success!
What I discovered is that the upgrade is only an upgrade in the sense that you end up with a newer version of FCE, because the old version is still sitting right there in the Applications folder beside the new one, and can still be launched and run as before. So, after "upgrading," you can take your pick which version of FCE you want to run.
Apparently the FCE HD installer program detects the earlier version and extracts all the user information from it, since the registration box appeared with all the information already filled in, and the only serial number it asks for is the new one. But it does not preserve and carry over any user preferences, button bar additions, etc. As far as that goes, you are starting out brand new in FCE HD.
Now, when I open an old project into the new version of FCE, a dialogue box tells me that I can save the project as a new version with a new name, while leaving the old version alone, which is just what I have been doing, for backup safety.
However, the old FCE 2 projects seem to run just fine in FCE HD, with no glitches at all. I did receive one complaint from FCE HD, upon opening an FCE 2 project, that a certain clip "had different in and out points" than it was supposed to have, or some such thing, so I just deleted that clip and replaced it with a fresh copy and all has been well since.
So, I guess I can report to anyone else contemplating doing this that there are no serious problems or glitches to be encountered while upgrading FCE projects in mid-stream, so to speak. I have now been doing considerable editing on old projects in the new version of FCE with no problems whatsoever (knocking on my wooden head!).
And I really like LiveType and Soundtrack! The upgrade comes with a tutorial DVD that walks you through FCE HD, LiveType, and Soundtrack, and I have subsequently made my first animated titles and soundtracks, quite easily. Impressive! Gaining those two programs made the upgrades worth the trouble and expense.
My only gripe, a minor one, is that a lot of the Soundtrack loops seem geared to teen or twenty-something boys, since it contains so much trendy synthesized throbbing, and the "people" sound effects consist of a great deal of agonized screaming--just what I would have enjoyed at age 17, but not now, forty years later. I was hoping for a selection of more sedate and melodic-sounding loops. (The tutorial also employs a demonstration project showing athletic boys roller-skating across a vast mud flat at suicidal speeds, while holding large kites or sails for wind-propulsion. A fall or crash under those conditions would be spectacular, and I watched eagerly for one, but amazingly, not a single lad came a cropper--not in the chosen clips, anyway).
Now, can anyone tell me where I might acquire some more classical and mature music loops (symphonic, perhaps) for this wonderful program, Soundtrack?
Tom

Upgrade FCE to FCP Apple Prores etc

Hi,
I just purchased my first mac a few weeks ago. I was deciding between purchasing FCE and FCP, and ended up buying FCE. None of the specs I read mentioned the 1440x1080 resolution limit on importing AVCHD, nor did I read anywhere that the import codec was limited to a heavily compressed AIC codec rather than ProRes.
I've only had FCE since July 1. Now that I realize that issue, I want to upgrade to FCP, but called an apple store in the area and they said there is no upgrade path from FCE 4 to FC Studio. Is there any way I can do this? I really like the software, but these limitations were not mentioned. It said AVCHD support and when I read about that further, there was no mention of the bad compression and resolution limits. The footage looks about as good as 720x480 DV.
Is there any way that I could upgrade my FCE 4 to FC Studio and make use of the ProRes codec and I hope full 1920x1080 resolution?
Thanks in advance!
Adnan Hussain

Adnan,
I am very interested in your post as a new user of FCE and a AVCHD camera user for awhile now. Can you tell us what your camera records in? Is is 1920 x 1080 i60, something else? Also what is the output you wish to use...SD DVD, Blu-ray DVD, Apple TV or internet.
My experience has been that with AVCHD, and most other formats I suspect, some loss of quality is to be expected during the editing process. Comparing clips from the camera to clips that have been imported to editing software and then exported to some other format is not an apple to apples comparison. ( no pun intended ). How the clips are imported and in particular how they are exported have a huge impact on the final result. The Pro res codec in FCP may offer some higher quality output, but at a much higher price and depending on what you want to view this on......it may not matter. So bottom line, as Ian has responded, in your case switching to FCP may not help.
One final question is how have you tried to export the movie, what was the work flow you used? There might be some settings that you can change to get closer to the results you desire.

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

Unable to Sign in analytics After Upgraded obiee from 10g to 11g

Hi all,
I have problem when upgrading catalog from 10g to 11g.
The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
I upgraded following the steps like this:
1.Login EM and check BI server is running successfully.
2.Started the UA.bat.
Select the operation:Upgrade Oracle BI RPD and Web Catalog.
Step by Step,and the upgrade completed successfully.
3.Open the RPD online using the Admintool succefully.
4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
5.Then I Try to Regenerating User GUIDs
1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
a. Open NQSConfig.INI for editing at:
b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
e. Save and close the file.
2. Update the Catalog element in instanceconfig.xml:
a. Open instanceconfig.xml for editing at:
b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
c. coreapplication_obipsn
d. Locate the Catalog element and update it as follows:
e. <Catalog>
f. <UpgradeAndExit>false</UpgradeAndExit>
g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
h. </Catalog>
i. Save and close the file.
3. Restart the Oracle Business Intelligence system components using opmnctl:
4. cd ORACLE_HOME/admin/instancen/bin
5. ./opmnctl stopall
6. ./opmnctl startall
7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
Important: You must perform this step to ensure that your system is secure.
8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
9. Restart the Oracle Business Intelligence system components again using opmnctl:
10. cd ORACLE_HOME/admin/instancen/bin
11. ./opmnctl stopall
12. ./opmnctl startall
BUT THE ERROR ALSO EXISTING!
So,waiting for the help,thanks!

Hi,
if your using oracle db please make sure your db settings and tnsnames.oRA settings
also try you please try below troubleshooting steps:
1) please check latest error message and find the root cause,
presentation catalog log path:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
also check it nqserver.log file
oracle bi server log path ref:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
e.x:
C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
view physical data.
also paste it your latest error log message (nqserver.log and sawlog01.log message) here
THanks
Deva

Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?

Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?
For those who have done this,
1. What quirks did you find that you had to overcome in your installation (I know that everyone's environment is different and produces differest results)?
2. What part of your code broke for which you had to find fixes?
Tips and suggestions for a smooth installation, besides following the installation document.
Thanks!

Create a car (archive file) in CF 9 enterprise which will capture all CF 9 settings like Data sources, Web services etc. Make sure when you are doing this, pop up blocker is disabled.
NOTE : While creating the archive file, give the full name with the absolute path in the package name. For example C:\Test\mypackage.car
Then move this car file into the server where you want to install CF 11. Install CF 11 and then deploy this archive (car) file. All CF 9 settings will be migrated to CF 11 enterprise.
Else, if you want to install CF 11 on the same server where CF 11 is installed, then remove the connector for all the websites which are configured with CF 9, make sure the CF 9 services are running and then run the CF 11 installer and at the end of CF 11 installation, you will get a dialogue box which will ask you to migrate CF 9 settings in CF 11.
Run the Code Analyzer in CF 11 Administrator to check whether any the CF 9 code used in your application is breaking in CF 11 or not
HTH
VJ

R12 Upgrade Report from 11i Getting Error

Hi everyone,
We are currently working an R12 upgrade project from 11.5.10 to 12.1.3. I am currently converting a report from 11i to R12 but it is erroring out when I run it in R12. Below is the log. Any help would be greatly appreciated. Thanks.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXHH_APXNACHA_CHASE module: XXHH: NACHA Payment Format Chase (HHG)
Current system time is 06-DEC-2011 15:52:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='JRG120111b'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 6 15:52:04 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3660174.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 06-DEC-2011 15:52:06
---------------------------------------------------------------------------

It looks as though its failing in your beforereport trigger.
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.I dont believe payment batches are used anymore as they need to be done via Payment profiles and therefore you will need to use Payment Instruction ids instead. Also the setup at R12 is Mosaic
try including this. as the first statement in the Beforereport trigger. All the banks tables payment tables has changed so unless you have changed these to you will need to adjust these correctly to the R12 tables.
BEGIN
MO_GLOBAL.INIT ('SQLAP');
MO_GLOBAL.SET_POLICY_CONTEXT('S',FND_PROFILE.VALUE('ORG_ID'));
END;

Oracle Forms & Report Upgrade/Migrate from 6i to 11g

Hi All,
We are planning to upgrade/Migrate from Oracle Froms and Reports 6i to 11g. Can some one please give me an high level steps to upgrade and migrate from 6i to 11g version.
Many thanks in advance.
Kind Regards,
Mohan

hi ,
use below steps for Eliminate this issue
To start the wizard version of the Forms Migration Assistant:
1. On Windows systems, set the environment variable FORMS_PATH:
SET FORMS_PATH=%ORACLE_HOME%\forms
On UNIX systems, set the variable FORMS_PATH as in the example below:
setenv FORMS_PATH $ORACLE_HOME/forms
2.
In Windows, from the Start menu, select ORACLE_HOME | Forms Developer |Oracle Forms Migration Assistant (GUI Mode), or at the command line, start the conversion utility by entering: frmplsqlconv.bat mode=wizard.
or
in UNIX, enter frmplsqlconv.sh mode=wizard.
The Conversion Wizard Welcome dialog displays.
Regards,
Babu

Upgrade IDSM2 from 4.1(5)S225 to 5,1 using application partition

can i upgrade an IDSM2 (WS-SVC-IDSM2-BUN)in a 6513 from 4.1(5)S225 to 5.1 by copying the 5.1 application partition to the sensor
[from the cisco userguide]
Chapter 10 Configuring the Sensor Using the CLI
Reimaging Appliances and Modules
Reimaging the IDSM-2
This section contains the following topics:
Catalyst Software, page 10-124
Cisco IOS Software, page 10-126
Catalyst Software
To reimage the application partition, follow these steps:
Step 1 Obtain the application partition file from Software Center on Cisco.com and copy
it to an FTP server.
Step 2 Log in to the switch CLI.
Step 3 Boot the IDSM-2 to the maintenance partition:
cat6k> (enable) reset module_number cf:1
Step 4 Log in to the maintenance partition CLI:
login: guest
Password: cisco
Step 5 Reimage the application partition:
[email protected]# upgrade ftp://user@ftp server IP/directory
path/image file
Step 6 Specify the FTP server password.
After the application partition file has been downloaded, you are asked if you
want to proceed:
Upgrading will wipe out the contents on the hard disk. Do you want to
proceed installing it [y|n]:
Step 7 Type y to continue.
When the application partition file has been installed, you are returned to the
maintenance partition CLI.
Step 8 Exit the maintenance partition CLI and return to the switch CLI.
Step 9 Reboot the IDSM-2 to the application partition:
cat6k> (enable) reset module_number hdd:1
Step 10 When the IDSM-2 has rebooted, check the software version.
Step 11 Log in to the application partition CLI and initialize the IDSM-2.
See Initializing the Sensor, page 10-2, for the procedure.
IF NOT, THEN IS THERE A SHORT CUT FROM 4.1 to 5.1 ?

Just wanted to clarify some things.
As Scott has already confirmed you can re-image using the method described and following Scott's advice on what additional updates to install.
BUT understand that any configuration you have your 4.1 sensor will be lost during that method of re-imaging to 5.1.
Another alternative is to first upgrade from 4.1(5)S225 to 5.0(1), and then to upgrade to 5.1(1).
The upgrade to 5.0(1) will convert the 4.1 configuration into a compatible 5.0 format.
I saw another post you made implying that you had to downgrade back to 4.1(5)S189 to do the 5.0(1) upgrade. This is not the case. You can upgrade directly from your current 4.1(5)S225 to 5.0(1).
You can install the IPS-K9-maj-5.0-1-S149.rpm.pkg file directly on your current 4.1(5)S225 sensor.
When S225 was installed on your 4.1(5) sensor, it also placed in storage the corresponding S225 update for your 5.0 sensor.
So when IPS-K9-maj-5.0-1-S149.rpm.pkg is installed on the sensor it will detect that stored off S225 for 5.0 and install it at the same time.
So once installed you will be immediately at 5.0(1)S225.
Once at 5.0(1)S225, then you can upgrade directly to 5.1(1) using the IPS-K9-min-5.1-1d.pkg upgrade.
(NOTE: 5.1-1d file was created to fix some upgrade bugs, but still installs the same 5.1(1) files as the original 5.1(1) upgrade package).
So you will wind up at 5.1(1)S225.
Now at this point I would recommend installing at least one later signature update (S226 or higher in your case) BEFORE installing the 5.1(1p1) patch.
And AFTER the signature update, then install the 5.1(1p1) Engineering Patch (contact the TAC for this patch).
Because of this specific upgrade path, the best way to avoid some issues is to install at least one signature update before installing the 5.1(1p1) patch. The signature update helps to ensure the sensor is ready for the 5.1(1p1) upgrade. Some of the files needed for the 5.1(1p1) upgrade have been seen to not get carried forward properly in the upgrade from 5.0(1) to 5.1(1), but a signature update corrects those issues.
NOTE: This precaution of installing the signature update BEFORE the 5.1(1p1) is only needed when upgrading from 5.0(1) to 5.1(1). If imaging directly to 5.1(1) using the maintenance partition, then the 5.1(1p1) can be installed before a signature update without an issue.
Once 5.1(1p1) is up and running and monitoring packets and generating alarms, then additional signature updates can be installed afterwards.

Upgrade 4240 from 4.1 to 5.0

Salam
i want to upgrade 4240 from 4.1 to 5.0
when i am in romon mode and i give ip address to managment Interface of IDS and Tftp Server Address. After giving address i am not able to ping in romon mode to tftp server. i have use cross cable between IDS and TFTP Server and also droping straight cable from IDS and tftp server on switch. But when i am in configuration mode then i can ping. So please tell me what i do to upgrade 5.0. also tell me if any other method to upgrade . Thanks in advance

If you are truly attempting to upgrade from 4.1 to 5.0 (versus a re-image), the correct approach is to install the 5.0(1) Major update file using the CLI upgrade command. This will retain any configuration settings on the sensor.
The steps you describe above are to re-image your sensor using the 5.0(2) system image. I am not sure why your settings are not working. Have you assigned an IP address to the gateway? Depending on your network topology, this may be necessary. You should also try pinging your gateway or another active address on your network to see if you are even getting out of the sensor.
-Rusty

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Problems with charts after upgrading APEX from 3.2 to 4.1

After upgrading apex from 3.2 to 4.1 the combination stacked bar/Stepline charts no longer works. Any help would be appreciated.
Thanks.

Hi "904055",
I believe the reason your chart is no longer working is because you are attempting to generate a chart type that is not covered by our AnyChart Flash charts license i.e. Stepline charts are not one of our support chart types. We only support the chart types exposed via the Application Express UI i.e. the chart types listed in the Create wizards. If you wish to create other AnyChart chart types, you will need to contact AnyChart directly, in order to obtain a separate license and swf file.
If you believe that your chart is only using chart types covered by our license, but are still experiencing issues, then please place a testcase on apex.oracle.com, post some login credentials, and I'd be happy to take a look.
Regards,
Hilary

Flash builder 4.7 upgrade issue from Flash builder 4.5 (key is not valid)

Hi,
We (Company) are buying Adobe products more than 6-7 years now. We bought the Flash builder premium 4.5 and Flash builder premium 4.5 for PHP volume licence. Now flash builder 4.7 should be complementary upgrade for us. But when we are using Flash builder 4.7 trial version and adding serial number (Flash builder 4.5 serial number), it's just not working and showing a error "key is not valid".
I chat with Adobe customer care 4 different people, they end up saying that let us transfer you to volume licence department and then chat ended. No more chat messages, I checked more than one hour and still no message.
Then I called they, it took 15 mins to connect with customer care. I picked the "upgrade" option from phone menu and then connected with a guy. After listening complete case he forwarded my call to Volume licence executive and the volume licence executive transferred it to some other guy and the other guy redirect it to some specialized person. So total 4 guys. The last guy (specialized) name was Rohit.
This guy Rohit asked me, did I buy a customer support programme (some product about $2.nn.00 )? I said no, we bought volume licenses for Flash builder premium 4.5 ( about $4000.00 ****). He said, sorry sir I can not help you in this, but I can provide you an e-mail address and you can report your concern there. I already passed my 1.5 hour in this conversation. I said okie. He gave me a case number and told me that he will send a email mentioning that email address as per my request I disconnect the phone.
I never get that email address.
Can some one suggest me what to do next. My case number is : 209-788-274.
My email is: [email protected]
Thanks,
Amitabh Arya

I have the same problem, and i have send request complementary upgrade (Adobe® Flash® Builder® 4.7 Complimentary Upgrade), and only received a Acrobat change licensed...
I´m working with 4.7 Beta the last mounths, and now all the days have to see "please enter your license". So one problem that you can jump with money (if you have that money..), isn´t a problem. Like a i have license from flex 3, upgrade to flex 4, and upgrade to flex 4.5, i´m going to take de upgrade from 4 standard to 4.7 standard (47,97 euros), and not waste my time and money on calls. So yes, I'll see adobe with another eyes...
Best regards,
José Ramón León

Upgrade FCE from 2.0 to 3.5

Similar Messages

Maybe you are looking for