Upgrade firmware of n73.

How can i create playlist of video song for real player of n73. No option to create playlist or tracklis in real player n73 (like n80 real player). If the problem solve with firmware upgrade then please help me, How can i upgrade firmware of n73.

aj4036: i tried too but couldnt figure out how to create a video playlist... i dont think it has been implemented in the next firmware either...
you can update your firmware by taking your phone to your nearest Nokia Service Center or waiting for the N73 to be supported by the Nokia Software Updater

Similar Messages

  • Ipad wifi does not connect after upgrading firmware to 3.2.2

    So many posts and replies on connection to wifi with iPad not working... My issue is that everyhing worked perfect a home until i upgraded firmware to latest (3.2.2?). Now it connects and disconnects in second intervals ??!!
    no changes has been made to my router and my two macs connect as before, only iPad does not
    Very frustrating indeed, so any tips on what i should do?
    Cheers in advance

    krannisto wrote:
    So many posts and replies on connection to wifi with iPad not working...
    You may already have seen these suggestions, but in case you haven't:
    _Pad: Troubleshooting Wi-Fi networks and connections_
    ...from here:
    http://www.apple.com/support/ipad/wifi
    And every iPad comes with complimentary telephone technical support for 90 days:
    http://www.apple.com/support/contact/phone_contacts.html
    _iPad Service: Frequently Asked Questions_

  • Is it necessary to be connected to wireless router/ap to upgrade firmware of WRE54G V1.0 ?

    Is it necessary to be connected to wireless router/access point to upgrade firmware of WRE54G V1.0 in order to support universal repeater mode ??? Please let me know with full details what should I do in order to upgrade the firmware but without stay connected (in range) of a signal of a wireless router ot an access point. Thanks. 

    neighbour_devil wrote:
    Hey mike,
    the static IP of 192.168.1.5 has to be assigned to one of the wireless PC's that you have....make sure that you assign the static IP to the "wireless network connection" . once you have done so....check if you are able to see the SSID of the WER54G..connect to that SSID...and then try to ping 192.168.1.240 from the command prompt...if you get replies...then try to upgrade the firmware.
    Can someone walk me through the steps of assigning the static IP to the "wireless network connection" referred to in the last post? I would assume you would right click on My Network Places, then right click on the "wireless network connection", but give me the steps after that. I don't want to screw anything up. Also, is it necessary to turn the router off, or can I just temporarily disable the connection on my laptop?
    Thanks,
    ~MaxMessage Edited by maxrich on 08-18-2006 06:30 AM

  • I have the error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. need help please.

    error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. What sould I do?

    Hello Philly,
    I believe that when you reset your ipod(command given from the computer, right?)  touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
    I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
    ~Remember, I am just giving an educated guess on limited information

  • How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

    how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
    The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

    You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
    To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

  • To know about software upgrade of nokia N73

    my dear sir,
                         I want to know Processe of  about software upgrade of nokia n73.
                         I do not know any options of upgradation & update. So plz help me. I had lost my                                complate data From My phone. I know only Hindi language.

    Being an S40 device, the options are very much limited in this case. You need to take the phone to Nokia Care...
    ..only thing you can do is, confirm that the battery is charged..(Put on charging for about 15 minutes)..and then try switching ON. If no responce then do as mentioned above.

  • How can i Restore Old Firmware of n73 !

    How can i Restore or update Old Firmware of n73 !
    actually i want old ‎ - V3.0705.1.0.31 some like that !
    becoz new firmware is not good !
    problem in playing songs when i want to play new song its show all songs list from begning
    in old version easy to select any song
    and itz very slow
    please can any tell me how can i get it back in old one please
    my n73 is old
    date 2007 
    please help me

    You can't.
    What you can do is go to your nearest Nokia Care Point and explain the situation and why you'd rather roll back to an older version. They might be able to flash the phone with older firmware but there's no guarantee that they will.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • After upgrade firmware my iPod does not respond to touch. Help me!

    After upgrade firmware with iTunes my iPod does not respond to touch.
    To be more precise - works, but very, very bad. And around the icons on the display is visible GRAY line of width 1 px.
    Please HELP me! This iPod - the gift for my girl.
    p.s. Maybe this problem arose because I reflash iPod with old cable from the iPhone?

    Thanks all, i solved the problem yourself.
    I helped this one topic: http://discussions.apple.com/thread.jspa?messageID=12641053&#12641053

  • Error on trying to upgrade firmware on BEFW11S4-V2 ?

    Hi.
    I am trying to upgrade the firmware on a BEFW11S4 V2 router. From the Set-up panel, the current firmware is 1.45, dated Feb 28, 2003.
    I backed up the config. and downloaded the latest firmware:
     "BEFW11S4-V2_v1.45.10_fw.bin" from the Linksys website.
    When I go to update the firmware from the router's Set-up .../Help .../Upgrade Firmware,
    after selecting the above file, the update starts and goes for about 5-10 seconds and then fails with the messages:
    ..."Upgrade action is not finish!!
        Upgrade file pattern error"
        Continue
    ...which then returns me to the previous Upgrade Firmware page. Have I missed something??
    Also...
    As background info. (before I forget), I run the router from an XP destop for connection to a DSL ISP and printers connected to the XP machine and for wireless access for a new Win7 Toshiba laptop. Everything seems to work fine so far, but I thought I should get on the latest firmware, eventhough the update would only be a currency update as the release notes don't seem to be an issue from a quick read.

    I think you should reset the router first.
    Connect the computer with the Ethernet cable to the router Ethernet Port.
    Download the latest firmware from the Linksys website.
    Open the setup page of the router.
    Upgrade the firmware using the .bin file which you have downloaded.
    Do not take the backup.
    After successful upgrade,reset and reconfigure the router settings.
    And see if that helps you.

  • Should I upgrade firmware to Samsung version NK1 (VZW) or stay with Version's latest NG6 (VZW) is asked by Samsung Kies software check?

    Should I upgrade firmware to Samsung version NK1 (VZW) or stay with Version's latest NG6 (VZW) is asked by Samsung Kies software check?

        Thanks for asking, jrh4054. We always recommend updating your software to the most recent version. At this time, NK1 is the way to go.
    http://vz.to/1BkClyB
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Switch fail to upgrade firmware

    Hi 
    I use a SG200-26 smartswitch. It's a fine switch and works OK no problems.
    Recently a new firmware was released 1.4.0.88 My current firmware is 1.3.7.18 - but when I try to load the new firmware I end up with an error message saying the file is over size. What can I do to make it load the file ?? I redownloaded the firmware but got the same result.
    I you got an idea of how to make it load the firmware, please share it :-)

    Hi,
    You need to upgrade boot version first to latest one then try to upgrade firmware. upgrade boot version to 1.4.0.02 through tftp
    switch57053a#show version
    Unit SW version Boot version HW version
    1 1.4.0.88 1.4.0.02 V02
    Regards,
    Akash

  • How to downgrade Timecapsule 7.6.4 to 7.6.1... I have no button "Upgrade Firmware" on the latest release of rhe Airport utility

    With a TC 2nd generation, I have problem with Wifi dropping down after few days.
    I'm running 7.6.4 firmware and it looks that people having same problems have fixed it with downgrading to 7.6.1
    On the latest Airport utility (running on my MacOSX maverick), I could find any button (or menu) to upgrade firmware (or choose to downgrade to a previous version)
    Has anybody an idea to force this downgrade?
    Many thanks for your help!
    Best
    Marc

    It is a hidden option.
    Click on the TC in the airport utility.. then in the summary screen..
    Click on the version with the option key held down.. all the other firmware available show up.. select one..

  • Firmware for N73 & new ver. real player

    I need new Firmware for N73 because in n73 real player can not create video playlist. Anyone help me.
    How can i install new firmware for n73. Please give full details for installation process.

    As far as I know N73 new firmware can be installed only by Nokia Service Center nearest you at the moment.
    Nokia N97 v. 12.0.024

  • I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks

    I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks

    vinayakfrommonroe wrote:
    I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks
    Hi: Check out the Apple article below.
    https://discussions.apple.com/message/15112985#15112985
    Stedman

  • AG310:How to upgrade firmware on the Voice part?

    Team, Very simple question, where do I get the latest sipura code to upgrade the voice section of the AG310. Currently running 5.1.5(GWa). Is that the latest, I check the AG310 download section, it only has the router firmware and not the voice component, unless it gets bundled together ? Please help. Thanks.

    You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
    To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

Maybe you are looking for

  • PROBLEM Creating a Sample Application from Uploaded Data - ENDECA 3.1

    Good morning. I'm installing OEID 3.1 and y have many problems. One is when i want to créate a Sample Application from Uploaded Data following "InfoDiscGettingStarted.pdf" I have the next error message: "Task execution failed for workflow ID 1. Task

  • Logical file name or logical path name incorrectly defined

    Dear All, We are doing archival in our IDES for test purpose before we do it to our Production. Steps Performed Copied AM_ASSET archive object to ZAM_ASSET Logical Path   Logical path    ZAM_ASSET   Name            Asset   Syntax group    UNIX      

  • The question about htmldb_item.radiogroup

    Hi, I use htmldb_item.radiogroup founction to setup a radio group in report like that: select requestid , htmldb_item.RADIOGROUP(1,requestid,requestid,null,null,null,null,'foo(this)') from table ....... I hope to save the radio value into a global va

  • Pls reply urgent

    Hi all, I am using a function mod for mail alert. The user wants cretain names as BOLD & Colors in the text. Is there any function mod which sends the mail with BOLD, COLORS & any other options? Pls urgent. Thanks in advance. Vijay

  • Create a listview in hierarchy and bounded using LINQ

    Hi, I would like to know how I can setup a listview (or any other asp control), so that it can be bounded to LINQ and will show the hierarchy of the data. Here is my data: Year      Name 2014     Apple 2014     Orange 2014     Manago 2013     Apple 2