Upgrade from 4.7 to ECC 6.0 - Purchase Order Statiscal Delivery Date
Hi.
I need your help please. When an order is created via ME21N, the Statistical Delivery date on the Delivery Schedule Tab gets populated automatically with the delivery date that was captured on the Item Detail, if not manually updated.This is how it works on version 4.7, I tested this on the 4.7 Box and it works in the above manner. Now after the upgrade to ECC 6.0, the statistical Delivery Date does NOT, get automatically updated. According to System help etc, it should. When you also change an order that already had the Statistical Delivery date, the system now changes the date to a blank value. In version 4.7, this did not happen
Can someone please shed some light, is there a setting that needs to be done in Config or a note that needs to be applied?
Regards,
Jody Ponnusami.
Hi Jody ,
I got similar issue with statistical delivery date , but from version 4.6c to ECc 6.0 . and it is for PO doc type NB , not for STO .
The solution as per the note # 1164767 works only for STO ? or It works for PO with doc type NB also ?
Could you confirm when you apllied the note , whether the issue resolved for all types of POs or only for STOs?
Thanks
Manyam
Similar Messages
-
Interview questions on upgrades from 4.7 to ECC
Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
ThanksHi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact. -
Error during Upgrade from 4.6c to ECC 6.0
Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar KHi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar -
Unicode error while upgrading from 4.6 to ECC 6.0
Dear All,
I am getting unicode errror while upgrading from 4.6 to ECC 6.0, when iam trying to open downloaded file in excel.
In debugging, error occurs while executing statment "CALL METHOD OF obj_ex_sheet " in the code given below:
FORM open_downloaded_file_in_excel *
FORM open_downloaded_file_in_excel.
DATA:
lv_ole_books TYPE ole2_object,
lv_ole_sheets TYPE ole2_object,
lv_subrc LIKE sy-subrc,
lv_title(70) TYPE c,
lv_text1(70) TYPE c,
lv_text2(70) TYPE c.
start excel
CREATE OBJECT obj_ex_sheet 'EXCEL.SHEET'.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
CALL METHOD OF obj_ex_sheet 'Application' = obj_ex_app.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_app.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
SET PROPERTY OF obj_ex_app 'Visible' = 1.
open data file: main file
CALL METHOD OF obj_ex_app 'Workbooks' = lv_ole_books.
CALL METHOD OF lv_ole_books 'Open' = obj_ex_wbook
EXPORTING #1 = gv_filename
#2 = 2
#3 = 0
#4 = 1
#5 = 0
#6 = 0
#7 = 1.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_wbook.
FREE OBJECT obj_ex_app.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
FREE OBJECT lv_ole_books.
CALL METHOD OF obj_ex_wbook 'Worksheets' = lv_ole_sheets.
CALL METHOD OF lv_ole_sheets 'Item' = obj_ex_wsheet
EXPORTING #1 = 1.
FREE OBJECT lv_ole_sheets.
GET PROPERTY OF obj_ex_wsheet 'UsedRange' = obj_ex_usedrange.
CALL METHOD OF obj_ex_usedrange 'AutoFormat'
EXPORTING #1 = 18.
SET PROPERTY OF obj_ex_wsheet 'Name' = sy-tcode.
FREE OBJECT obj_ex_usedrange.
PERFORM free_ole_objects.
CALL FUNCTION 'FLUSH'
EXCEPTIONS
OTHERS = 0.
ENDFORM.
regards,
Divyahi,
In the OPEN DATASET STATEMENT ADD THE ENCODING ADDITION IN TEXT MODE.
Regards,
Balakumar.G
Reward Points if helpful. -
Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)
All,
we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28.
The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown:
Message no. KG346
The variant does not adhere to the current Customizing setup
We have saved the variant again, and no problem are present, but the error message refers also to Customizing setup.
Is there a section in the Customizing where it is possible set up the field to show in the initial screen or the new fields (All Valuation Views, Legal Valuation View and Profit Center Valuation View) are due to the release upgrade?
If yes, do you know the transaction/path?
Thanks in advance for your collaboration.
Regards,
Jody Mancini.Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridharHi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Issues during technical upgrade from 4.6c to ecc 6.0
Hi
We are doing a technical upgrade from 4.6C to ECC 6.0. Some transactions in QM module when tested in ECC 6.0 test client give a abap termination message (or dump) and certain transactions like qs42,46, qa18, qs34 etc do not get executed (error = no entry foound for......) and similarly in PP-PI module transactions like C203 have similar problems, even though master data does exist. What should I look for? Can somebody pl. give details on configuration checks and the OSS notes from a functional point of view for a technical upgrade?
For certain transactions I get the error message - "Central system of distribution SM-P06CLNT430_TRUSTED is unreachable RFC destination SM_P06CLNT430_Trusted does not exist" - what does this mean?
thanks
BEHi,
1. Have you done successfull installation from 4.6C to ECC 6.0 at the time of PrePare ans SAPUP?
2. Check SP' for QM and PP-PI modules from http://service.sap.com/sp-stacks.
3. Configure RFC connections correctly, SM_<SID>CLNT<No>_Trusted automatically created, not manually.
http://service.sap.com/notes --> search for RFC trusted connections for Ecc 6.0
http://service.sap.com/upgrade.
Regards,
Srini Nookala -
Upgrade from 4.6c to ecc 6.0
Hi,
We are doing a technical upgrade from 4.6c to ecc 6.0 without activating New GL. As a functional consultant, what should i look for? I know that we need to test the business processes and check Z programs but anything specific, plzz let me know.
What changes should be made in Asset Accounting?
Regards
SatyaThanks for the reply.
What are the changes made in Asset accounting after upgrading?
I heard of RBE tool...how is it used for FI?? (u check for the mostly used transactions or what??)
Anyone, plzz answer..waiting for ur replies
Regards
Satya -
Upgrade from 4.7 to ecc 6.0
hi
it would be great help if you tell me about the upgrade from 4.7 to ecc 6.0 am an sd functional consutlant so wat would be my role in this upgrade and are the transaction codes and menu path same or have some changes in it and could please tell me some sd transaction code and some interview related question wat they ask while taking an upgrade interview for a sd consultant
thanks in advance
pritiDear Priti,
Visit the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/ .......give source and target versions to find the difference.
Major difference is ECC6 is netwear product having WASJAVA+ABAP secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides.
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack. 4.6C supports NONUNICODE.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/4d2091de9657bfe10000000a155369/content.htm
Hope this will help.
Regards,
Naveen. -
Upgrade from 4.0B to ECC 6.0
Hi
I have few questions related to upgradation from 4.0B to ECC 6.0 (wrt HR)
To wat extent it is possible, if yes then how simple or difficult it is ?
Time Factor (Duration)? ?(assuming the size of the company close to 1000)
Do we have any set of standard procedures and guidelines that are to be followed ?
any helpfull documents to understand the process?
Thanks in advance..
Regards
RaoRao,
My new project is upgrade project from 4.0B to ECC 6.0 in MM/IM/WM area,
I have to give an estimate of duration to complete this project.
Have you started your project. how is it going? how long the project? and any other useful documents please pass on "[email protected]" -
After upgrading from 4.6C to ECC 6.0 templates not working in smartform
Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
AbhishekHi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran -
Upgrade from 4.7 to ECC 6.0 and MICR no longer printing
Hello,
We are in the process of upgrading from 4.7 to ECC 6.0. Our checks in FI and HR which have MICR fonts/lines are no longer printing the MICR lines. Any ideas on what to check?Hi Kenneth,
If you have any documentation for Upgrading from 4.7 to ECC 6.0 can you pls send it to me ?
Thanks
Christine -
Schema error after upgrade from 4.6C to ECC 5.0
Hi all,
We have recently upgraded from 4.6C to ECC 5.0. We are having problem in payroll run. When I did a syntax check in schema, I got "UDPM" rule doesn't exist. I checked, this rule is present in 4.6C. This is the standard rule. If I am right, it should have come with upgrade right?
or SAP has changed this? From where Can I get the info about this?
Also similar error I got in Function 'USTAX' parameter 3 is not allowed. If I remove that parameter, I don't know what is the implication of that.
I checked for SAP notes. I did not find anything.
Please let me know if any of you have come with such situation.
Thanks in advance.
Sarika.Hi Sarika,
We are also in a similar transition i.e. 4.6C to mysap Ecc5.0 . But we are on Canadian Payroll.
I had search OSS and got a PDF document regarding " Upgrading to SAP R/3 Enterprize - A User Guide to Canadian mysap HR Customers" . U may be can find a similar one for US payroll. I can give u mine, but it wont be of any use as it is for Canadian Payroll.
In Canadian mysap Upgrade , the function P0224 has been replaced by function KXDTM . Although P0024 is still in used in Schema K00T for conversion purposes.
Regards,
Jay Gandhi -
Layouts disappear after upgrade from 4.6c to ECC 6.0
HI friends ,
In the upgrade from 4.6c to ECC 6.0 , the layouts in the SAP QUERIES in the new system are either lost or showing lesser fields than original system .How do get the exact layouts as in 4.6c?
Please help...
Many thnx ,
Hemanth .Try using SQVI transaction .
Please reward if useful.
Maybe you are looking for
-
Macintosh HD icon showing as "in-use" ipod
My Macinotsh HD icon is showing as an "in-use" ipod on the desktop as well as in the finder. These problems started after my girlfriend tried to download itunes onto this computer (even though itunes was already installed). Now, whenever we plug in a
-
Itunes won't open, no error, just won't show up at all
I have an older version of itunes stuck on my computer because i cannot open itunes to upgrade or download a newer version from online. There is no error message or anything. Nothing happens when you click on it. It's very frustrating. I'd appreciate
-
Date Format Issue With Sharepoint DateTime Control
I Have a Web part where in create child control I am creating my controls. Where I have SharePoint date time control and I want to change the format of the control on change in the browser languages settings. Currenlt I am doing it by setting localID
-
Fast delete in Oracle database
Hi experts, Is there any way to fast delete records in the table with the condition? We can do the truncate statement this is the fastest way to remove all records in table, but for my case is need to keep records with do not match with conditions. T
-
Oracle Apps 11i Access from external harddisk
Hi..I recently got Oracle Apps11i installed in external harddisk.I am trying to access the sofware from my laptop..Which is by the way giving me hard time....My Laptop supports windows7 Os and my Apps support windows 2003....I am trying to access the