Upgrade from CIC0 to CRM IC Web - is NetWeaver XI required?

Hi,
I have a customer who is looking to move their processes from the customer interaction centre (CIC0) in the SAP GUI to the CRM 2007 IC WebClient. They have upgraded to ECC 6.0, but do not have NetWeaver in place today, so they have asked whether this is required for the implementation of CRM. Do I correctly assume that the CRM middleware concept has not changed (ie it still uses BDocs) with CRM 2007? Also, can you please confirm whether XI required for them to move to the CRM 2007 IC WebClient?
Thanks
Janine

Hi Janine,
Yes. There is no change in the CRM Middleware concepts in CRM 2007. There is no need for an XI for using the CRM Webclient.
Regards,
Shwetha

Similar Messages

Issue in upgrading from Fatwire 7.6 to web center sites 1.1.1.6

Patch upgrade from Fatwire 7.6 to Web Center sites 1.1.1.6 is failing while importing catalog elements. The database ping and csLogin test is successfully completed at 75 % of the installation. After that below mentioned exception is coming in logs which is causing installation failure. Please provide your valuable pointers to troubleshoot this issue.
Access to CATALOGDIRECTORY and ELEMENTDIRECTORY is verified. Both paths are correct with full access.
PFB the logs.
===========================================================
[2013-12-08 20:29:48.724][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL success for http://devbox.corp.apple.com:12040/cs/HelloCS
[2013-12-08 20:29:49.145][CS.INSTALL][INFO] CSSetupEngine.doPing: Database Ping Successful.
[2013-12-08 20:30:10.411][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Testing user configuration and database connectivity.
[2013-12-08 20:30:10.425][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL success for http://devbox.corp.apple.com:12040/cs/HelloCS
[2013-12-08 20:30:10.433][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction:
Web Server and Application Server Configuration test finished successfully.
[2013-12-08 20:30:10.442][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Attempting to Ping the Database.
[2013-12-08 20:30:10.462][CS.INSTALL][INFO] CSSetupEngine.doPing: Database Ping Successful.
[2013-12-08 20:30:10.473][CS.INSTALL][INFO] CSSetupEngine.Initialization: Testing user configuration and creating/verifying user tables.
[2013-12-08 20:30:10.475][CS.INSTALL][INFO] CSSetupEngine.initReinitAction:
ContentServer Database Initialization beginning...
[2013-12-08 20:30:11.041][CS.INSTALL][INFO] CSSetupEngine.initReinitAction: ContentServer Database Initialization Completed Successfully.
[2013-12-08 20:30:13.374][CS.INSTALL][INFO] ActionHandler.ExecuteCommand: ExecuteCommand success for http://devbox.corp.apple.com:12040/cs/Install?COMMANDNAME=SETJSPROOT&USERNAME=fwadmin&PASSWORD=<hidden password value>
[2013-12-08 20:30:13.472][CS.INSTALL][INFO] ActionHandler.ExecuteCommand: ExecuteCommand success for http://devbox.corp.apple.com:12040/cs/Install?COMMANDNAME=FLUSHPROPERTY&USERNAME=fwadmin&PASSWORD=<hidden password value>&propertyname=futuretense.ini
[2013-12-08 20:30:13.532][CS.INSTALL][ERROR] ActionHandlerExecuteCommand: ExecuteCommand failed for http://devbox.corp.apple.com:12040/cs/Install?COMMANDNAME=IMPORTCATALOG&USERNAME=fwadmin&PASSWORD=<hidden password value>&CATALOGDIRECTORY=%2Fnps%2Fapp%2Ffsnd%2Fcm%2Fcmsd%2FCRMBASE%2FScopes%2Fcms%2F11gR1archives%2FWCS_Sites_11%2FSites%2FContentServer%2FInstallation&ELEMENTDIRECTORY=%2Fnps%2Fapp%2Ffsnd%2Fcm%2Fcmsd%2FCRMBASE%2FScopes%2Facms%2Fprdm_cs_shared%2F%2Felements
The response that was received =
HTTP/1.1 200 OK
HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1
Date: Sun, 08 Dec 2013 20:30:13 GMT
Transfer-Encoding: chunked
Set-Cookie: JSESSIONID=CC6C6BB6AEA70CC05287299877843F52; Path=/cs
Content-Type: text/html;charset=UTF-8
Server: Apache-Coyote/1.1
<html><head><title>Hello World!</title></head><body>Welcome to WebCenter Sites 11gR1! Oracle WebCenter Sites 11gR1 11.1.1.6.1 
Copyright (c) 2012 Oracle and/or its affiliates. All Rights Reserved. 
Copyright (c) 2003 - 2011 FatWire Corporation All Rights Reserved. 
Copyright (c) 2001 - 2003 divine, inc. All Rights Reserved. 
Copyright (c) 1999 - 2001 Open Market, Inc. All Rights Reserved. 
Copyright (c) 1998 - 1999 FutureTense, Inc. All Rights Reserved. 
 
Oracle WebCenter Sites | Satellite Server 11.1.1.6.1 Build Date: Oct 23 2012 at 20:48:36 Build Number: 2371 Revision:152889 
Oracle WebCenter Sites 11gR1 11.1.1.6.1 
Copyright (c) 2012 Oracle and/or its affiliates. All Rights Reserved. 
Copyright (c) 2003 - 2011 FatWire Corporation All Rights Reserved. 
Copyright (c) 2001 - 2003 divine, inc. All Rights Reserved. 
Copyright (c) 1999 - 2001 Open Market, Inc. All Rights Reserved. 
Copyright (c) 1998 - 1999 FutureTense, Inc. All Rights Reserved. 
 
Oracle WebCenter Sites 11.1.1.6.1 Build Date: Oct 23 2012 at 20:48:36 Build Number: 2371 Revision:152889 
<hr>Sun Dec 08 20:30:13 GMT+00:00 2013 View source to see embedded status Result :
</body></html>
[2013-12-08 20:30:13.548][CS.INSTALL][ERROR] ActionHandlerExecuteCommand: Error Importing Installation Elements
[2013-12-08 20:30:13.585][CS.INSTALL][ERROR] Worker.run.
Install failed.
Please check log file.
Click Yes to modify your install choices
and re-try install.
Click No to terminate application.
=====================
Thanks,
Anil

May be it is expecting wlserver_10.3 directory.
Can you try giving a link to one directory above wlserver_10.3 OR the complete path to wlserver_10.3 directory.
One of this should make the upgrade successful.
Arun

Can i upgrade from CS5.5 design and web premiun to CS6 and still keep CS5.5 Dreamweaver

I want to upgrade from CS5.5 Design and web premium to CS6 standard. There are several programs like Dreamweaver that are not in CS6 standard. If i upgrade will i be able to keep the CS5.5 versions of programs that are not in the upgrade?

Yes, you can upgrade S&T editions by buying a commercial upgrade. Just make sure to pick the correct previous version during check-out or you'll get a serial number snafu...
Mylenium

How much is the price of upgrading from CS5.5 Design and Web Premium to CS6 Design and Web Premium?

How much is the price of upgrading from CS5.5 Design and Web Premium to CS6 Design and Web Premium?
And why is this price not on the Web site?
And when will this price be added to the Web site? It's long overdue.

Sorry. After downloading required Adobe CS6 Design and Web Premium files and attempting to install, the error message "
The file archive part of Adobe CS6 Design and Web Premium is missing. You need all parts in the same folder in order to extract Adobe CS6 Design and Web Premium. Please download all parts" appears. Using Window 8. This happens on the Adobe Design and Web Premium CS6 installer file.

Upgrade from SP2010 to 2013 [What is the minimum build required?]

Can SP2010 SP1 + June 2012 CU (14.0.6123.5000) be upgraded to SP2013? else, what is the minimum build required to move from SP2010 to SP2013?
Is there any Technet article which clarifies this?
Regards,
Harish Kumar

Actually the Build is not a problem because you will have to backup and restore SP 2010 backup on different machine and attach it to farm using powershell. you do not have a inplace upgrade option. you will have to go for database upgrade only
Check below article:
http://technet.microsoft.com/en-us/library/cc262483%28v=office.15%29.aspx
http://blogs.msdn.com/b/alimaz/archive/2012/07/17/upgrading-from-sharepoint-2010-to-sharepoint-2013-step-by-step.aspx

BI 4.1 Upgrade from BI 4.0 - MOBIServer web application is missing on AIX platform

Hello BI Technical Experts,
Recently, I have upgraded our BI environment from BI 4.0 SP05 Patch 06 to BI 4.1 SP03 Patch02 successfully. As per the BI 4.1 technical documentation the BI Mobile Server on the web application server (Tomcat 7) should have been deployed automatically but we are missing this in all our environments, looks like upgrading to BI 4.1 does not install MOBIServer automatically.
Technical Details:
From 4.1 Mobile Feature is available for AIX as well!
OS: AIX, DB: Oracle 11g
I would like to know if there is a way to run the setup.sh from the install directory in custom installation mode to modify the BI server platform to select Mobile Server under web application? I could not find this information anywhere in the SAP's knowledge base nor in the internet. I found how to do this operation in Windows and looks pretty simple but I am not getting the same wizard to choose the option when I run the setup.sh, it directly takes me to uninstallation step!!
Any input is much appreciated! This is holding our mobility project.
Thanks,
S Sumanth GV
This is the mobile application in CMC post upgrade. But I am missing the web application on top of tomcat.
Missing MOBIServer under warfiles and tomcat locations:

Hi Denis,
Thank you for taking your time to answer my concerns. However, I have tried running modifyOrRemoveProducts.sh from the install location but I did not get modify option to choose like you get in Windows. It just lists the installed products and add-ons and allows me to choose any one of those, if I select any of the BI Platform Server base components it directly takes me to the un-installation step. I ran the script just to show whats happening at my server for you to show.
Based on the product I select and once I click on continue then it will execute the following setupexe command which ultimately take me to the un-install step.
I am not sure which crucial step I am missing here?
Thanks in advance,
S Sumanth GV

Upgrading from CS4 design to CS5 web

I have the CS4 design premium suite. Does anyone know if I can purchase the CS5 web premium upgrade as is, or do I have to purchase full versions of the missing components of the web suite before I purchase the web premium upgrade? If someone could help, that would be greatly appreciated.

You can, but why do you want to? What will you find in the Web suite that's missing from Design. Answer: Flash Builder and Contribute.
IMO, Design Premium is the best bang for the buck out there and covers just about anything most designers would need. I have an article on my website you might find worthwhile: http://www.theindesignguy.com/purchase-advice.shtml
Also, be careful when buying. You need to get the CS4 to CS5 upgrade. You can get it on Amazon for about $580: http://amzn.to/ahaavR
Design Premium is $578: http://amzn.to/alNI7q
Hope that helps,
Bob

Upgrade from CS6 Standard to CS6 Web Premium?

I just bought CS6 Standard, but realize that I might need Flash and/or Dreamweaver. Can I upgrade to CS6 Web Premium?

You’ll need to call Adobe directly and ask.
Bob

Upgrade from CS3.3 to CS4 Web Premium but Flash CS4 doesn't install

I just installed my new version of CS4, and almost all the applications installed properly. All but Flash, that was greyed when I tried to make a "personal installation" and did not install at all when I used the "automatic" installation.
And there is something else : I had a beta version of Soundbooth, and Soundbooth neither was not installed. So, I presume I should uninstall it before trying again.
But what is it with Flash ?
Thanks for any help,
Gilles

Please could you be more specific ?
How do I find this script ? On the installation disk, I suppose ?
Or is it a way to launch the installation package ?
Thanks for your reply, Buko
Gilles
P.S. I checked on the disk 1 and there is 4 scripts into the resources/common/scripts/ directory :
ContainerProxy.js
localization.js
silentWorkflow.js
utils.js
P.P.S OK I found it : on the Lisez-moi file, there is a link to the CS4 support page (http://www.adobe.com/support/creativesuite/) and there is a link to the clean script. So I'll have to uninstall all of it...

Unable to open URL attachment from SBWP in CRM WEB UI

Hello Gurus,
Need your help please. I'm having some problem opening the URL attachment from SBWP via CRM 7 WEB UI (I used a Transaction Launcher for SBWP). The attachment is a Webdynpro application. I am able to open the attachment in SAP GUI, but not in CRM WEBUI. This problem occured when we update the SP level of CRM 7.
Here's the scenario,
- whenever I click the attachment, it open a new window, which also happen even before SP level update, with the following information:
Execute an Application on FrontEnd
Please wait. You will be forwarded automatically.
This page is included for technical reason.
Execute program.
Status: Displaying Office Document ..........
After a couple of seconds, it will return to the Workflow Workplace screen.
I have checked the workflow log and found no inconsistency on the attached URL.
Immediate response would be highly appreciated. Thanks in advance.
Regards,
Edwin

Thanks for the reply WD ABAP.
Yes, I did try to use the functionality of Worklist and the URL attachment successfully opened. However, there are some limitation in its functionality as indicated in the link below that opted us to use the SBWP in CRM WEB UI via transaction launcher.
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWorklist-AdvancewithDialognotSupported
We don't want to adjust the logic of our existing workflow at this point as described in the above link as it will entails end-to-end testing again. We just encountered this issue when we update the SP level of CRM 7.
Hope there is an alternative solution without shifting us to Worklist.
Regards,
Edwin

REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra Valy

Hi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy

I want to upgrade from Logic 9 to v.9.0.2-

Hi!
I want to upgrade from Logic 9 to v.9.0.2…this requires the origional Logic 7 serial number….. I origionally upgraded to Logic 9 from Logic Pro 7…. I still have the Logic Pro 7 black box, install discs and Dongle, BUT I don’t know where the origional Logic 7 serial number is actually located!!! Anybody know where it is? Thanks

Bluesjohan wrote:
Is there anyone who can help me to upgrade from 9.0.0 to 9.0.2?
I have downloaded 9.0.2 kpg but when i click on the file there`s a warning that says,
Your computer does not need this update.
what shall i do?
Go to the Applications folder and rename *Logic Pro 9.app* to *Logic Pro.app* .
Run the update installer.....
A

How to create new field while upgrading from CRM 4.0 to 7.0

Hi ,
How do we create new field on UI and store data into existing field in database?
Is there any option in AET to skip the creation of new field in the database table ?
Custom field is already created in GUI and database table while using CRM 4.0
Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
Using AET may create new field again in the database table.Please suggest.
New filed needed to be created in Marketing Campaign Element Header data.
Thanks
Jayasri

Hi Jayasri,
As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
Refer
FAQ - SAP CRM Upgrade from release 4.0 to 7.0
Regards,
Arjun

Upgradation from SAP CRM 5.0 GUI/PCUI to SAP CRM Ehp3

Hi Experts,
We have a requirement to upgrade SAP CRM 5.0 to SAP CRM Ehp3.
We can do the technical adjustment by using tcode SPDD and SPAU.
But how we can migrate from SAP GUI and PCUI screens to SAP WebUi screens ?
Please tell me all the upgradation steps and challenges to upgrade from GUI/PCUI screens to Webui.
Thanks & Regards,
Akhilesh Bhagat.

It's a tedious manual process to re-implement all your customizations over to the Webclient. I will say if you were good and kept business logic in BADI's then all you need to worry about is screen customizations. If not and you were like many folks, you are going to have to recode everything.
I did this about five years ago from CRM 4.0 to CRM 5.2(the first CRM release with webclient) and if you look at the content under my profile with way older blogs, you can find some of my commentary on doing this.
For EHP3, you need to learn/love/embrace the AET. You are also going to need to learn the SAP Web Client stuff ASAP. The great part for you is SAP offer classes or there is a book or two on it. You don't have to learn it from lean documentation like I did.
I disagree with the system reimplementation comment. There is no need to throw out your CRM instance. That's why we have upgrades. Keep your system, but reimplement the code in the SAP Web Client Logic. The great part is since you are coming from 5.0 -> EHP3 it's going to be like having a new CRM system again, as all the parts that need to be enhanced don't exist in your 5.0 box and that section of the upgrade system will look like a brand new system(at least that's how my 5.2 box looked like coming form 4.0).
Take care,
Stephen

Upgrade from CRM 4.0 to CRM 7.0 and disconnect mobile sales

Hi
With CRM 7.0 we want to utilize the web UI and stop using Mobile Sales. This means we will no longer need the comms station or workbench machines. Assuption is that with links to EEC6 from CRM 7.0 we no longer need to download sales orders and that CDB is redundant so mobile bridge can be turned off..
Has anyone done this before ? Do we need to be aare of anything ?
Best Regards
M

Hi,
we are also plan to do the same - replace CRM 4 MSA with CRM 7 Web UI. Technical Topics are more planning and checking: How does the User access the Solution (Netbook and UMTS), global availability, closing Mobile Bridge and deleting CDB Tables, check your Z Reports - some Developer used smo Tables which are not updated after the Upgrade. Plus Organizational challenges: With MSA you could do Rolloutwaves - Now for Example Frday Evening shut down all MSA User -> Monday morning All Users Go Live with CRM Web UI. This has to be handled (incl. deinstall/disable of TS Mobile) incl. Training and Support effort
Hope that helps for the Start
Andreas

Upgrade from CIC0 to CRM IC Web - is NetWeaver XI required?

Similar Messages

Maybe you are looking for