Upgrade from Cisco Prime infrastructure verion 2.0 to 2.1

Request you all to please let me know if i have to install point patch before upgrading the cisco prime infrastructure 2.0 to 2.1.

After moving to 2.1, there is a 2.1.1 point patch currently available.
You should install that and the latest device package (4.0 as of this posting).
As always, the Release Notes are the best place to check the current available updates.

Similar Messages

LMS 4.1 (Windows) & NCS 1.1 (VM) Upgrade to Cisco Prime Infrastructure 1.2

Hi All,
Im getting a bit confused about the whole upgrade migration process for the following config to Cisco Prime Infrastructure:
LMS - Version 4.1 , 500 devices. Windows Server 2008 R2 Standard SP1
NCS – version 1.1 , 50 devices Red Hat Linux ( 64 Bit) (Installation software - NCS-VA-1.0.1.4-small.ova)
I want to be able to backup databases and migrate licensing from LMS and NCS to one platform. Does anyone have experience of this and could possible guide me thorugh this process. LMS has SAS and NCS has SAU.
Help will be very much appreciated!!

It's a couple of steps but can be done. You may want to reconsider getting off of LMS since the latest Prime Infrastructure (PI 1.2) does not have full feature compatibility with the latest LMS (4.2.3). Have a look here for the comparison.
If you still want to do it:
1. Upgrade your NCS to PI 1.2 (instructions). If you're going with a total of 550 devices on a combined license you should use the medium ova file to get the correct server resource allocation. You will need to get the new license from the TAC or via the licensing portal. I'm not sure if you can get the PI license for your LMS upgrade directly via the portal but you do have the entitlement for LMS 4.2 and PI 1.2 (combined licenses not to exceed the original LMS number) if your SAS is current. You may need to contact the TAC and ask for the licensing team.
2. Upgrade your LMS to 4.2 and patch it to 4.2.2 (instructions). Once you've done that, there is a simple menu command to export your device credentials to Prime (Admin, System, Export Data to PI in LMS and then Operation, Device Work Center, Bulk Import in PI - instruction on Page 18 here). Do that and then in the new PI installation import the devices.
Verify everything is working and you can decommission the LMS server.

Collecting logs from Cisco Prime Infrastructure

Hi ,
I am currently working in integrating Cisco Prime Infrastruture with the siem tool Qradar.
Can any one help me out in below issues:
1)How and where is the log stored in Cisco Prime.?
2)Does the logs contains the logs of the devices that Cisco Prime manages?
3)Is there any way to sent out the logs from Cisco Prime to a third party device.?

Hi,
1)How and where is the log stored in Cisco Prime.?
/opt/CSCOlumnos/logs
2)Does the logs contains the logs of the devices that Cisco Prime manages?
AFAIK,
In the prime infrastructure Syslogs are directly read from udp port 514 and then filtered
, the non SEV1 and SEV2 syslogs will be dropped and will not be entered into db . The
syslog messages will not be saved into log files .
Till now PI support only SEV 0,1 and 2 syslog.
3)Is there any way to sent out the logs from Cisco Prime to a third party device.?
unfortunately , this feature is not there in PI so far.
Thanks-
Afroz
***Ratings Encourages Contributors ****

Change Interface availability threshold from Cisco Prime Infrastructure 2.0

Dear Community,
I’m working in Cisco Prime Infrastructure 2.0 and I’m having the following problem:
I want to monitor the interfaces availability from all the devices of my network. But only makes sense send an email notification for the most critical interfaces. I don´t want to receive an email notification every time anyone unplugs the network wire.
How can I achieve this?
I already tried to change the interface availability threshold from the Interface Health Threshold Template, but this one isn´t available to configure.
The idea was to change the severity of the alarm so I could distinguish what type of alarm would send email notification.
I also created a Custom SNMP Template that gets the ifOperStatus using the MIB IF-MIB. This also didn’t work because Prime Infrastructure doesn’t allow me to define thresholds to a Custom SNMP Template.
Without threshold, no alarm, without no alarm, no email notification!
Can you help?
Regards,
Daniel CJ

Only on the HA pair which would be the secondary.
High Availability (HA) RTU: If Cisco Prime Infrastructure is deployed in a high availability configuration with one primary and one secondary instance in an HA pair, then an HA RTU is required. You only need to purchase a single set of the regular licenses (for example, Base, Lifecycle, and so on) for the primary instance.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Export Alarm/Event Data from Cisco Prime Infrastructure 2.1+

I am looking to export the current Alarm data for my CPI 2.1 deployment. This so we can go through and organize the data in excel and better configure alarm/events....currently getting 3k a week and we need to tighten what constitutes a critical event and some other parameters. We need the raw data in csv format so do some analytics on it.
My issue is there is no reference in the admin/user guides to export alarm data. Also no button or option within the GUI. How can this be accomplished?

The supported method going forward is to have external tools interact with Prime Infrastructure via the REST API.
See the documentation on your Prime server for "GET Alarms":
https://<your server address>/webacs/api/v1/data/Alarms?_docs
...or you can download a copy of the API Reference here.

WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
Jelena

Hello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl           restoreDBTableMig.pl restoreJRMMig.pl      restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
     USER ID is ..................................... : sysadmin
     OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
     Generation to be restored is ................... : 0
     Backup taken from............................... : /opt/BKP/
     Common Services version in the backup data is... : 3.3.1
     Common Services is installed in................. : /opt/CSCOpx
     The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
     Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
     Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
     WARNING: The list of applications installed on this CiscoWorks server does not match the list of
              applications in the backup archive. If you restore data from this backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
     Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
     Available disk space in NMSROOT................. : 86451488 Kb
     Required disk space in NMSROOT.................. : 35906524 Kb
     (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
          Cross Platform Update started.
          Cross Platform Update completed.
          License check started.
             WARNING: The license details in the server are different from the backup data.
                      After restoring, please check the license available in the server.
             WARNING: Your current license count is lower than your earlier license count.
                      If you restore the data now, devices that exceed the current licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
Restoring DCNM CrossLaunch data.
          Restored DCNM CrossLaunch function.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
          Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
        10% of IPM Restore Completed
        30% of IPM Restore Completed
        50% of IPM Restore Completed
        60% of IPM Restore Completed
        70% of IPM Restore Completed
        100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena

Upgradding Prime Infrastructure version 1.2 and LMS 4.x to Cisco Prime Infrastructure 2.0

Hello,
A customer currently have 2,500 Cisco Prime Infrastructure Lifecycle device license using Prime Infrastructure version 1.2 and LMS 4.x. the customer wants to upgrade to Cisco Prime Infrastructure 2.0.
Does anyone know if it is possible to upgrade to version 2.0 without additional cost? the licenses from
Cisco Prime Infrastructure 1.2 has to be upgraded or we need only to rehost the VUDI.
Also could be possible to upgrade LMS 4.x to Cisco Prime Infrastructure 2.0?
thanks!

The two features you mention are two big missing ones. Another is full syslog capability. I don't believe CiscoView or day one support via package updates is included either.
Another is less tangible - the depth of experience and documentation available for LMS vs. Prime Infrastructure (particularly the wired management features). I agree for wireless PI 2.0 looks good. Some new features are coming for wired that look promising but they are new as of PI 2.0 so I'm taking a wait and see on them.
I hope to get 2.0 up in my lab in the next week or so and will hope to be pleasantly surprised but that's seldom the case with a major new release.

Cisco Prime Infrastructure and no new events / alarms since update to 2.2.1

Hello,
I have upgraded our Cisco Prime Infrastructure from version 2.1 to 2.2.1 (with a backup and restore). We have round about 700 APs and three 5208 Controller. So far everything seems to work really fine. The only problem is that there are no new alarms/events under "Monitor", "Alarms and Events".
The last entries (events and alarms) are dated before the upgrade. Other informations (like client counts for example) are correct.
Is there a known bug related to my problem? Can anybody help?
Thanks

I have done some research:
I see the following problems in the log-package (downloaded from Prime):
===
<msg time='2015-04-07T12:10:50.620+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
pid='9499'>
<txt>ORA-1652: unable to extend temp segment by 128 in tablespace TS_EVENTS
</txt>
</msg>
<msg time='2015-04-07T12:10:50.727+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
pid='15177'>
<txt>ORA-1652: unable to extend temp segment by 128 in tablespace TS_EVENTS
</txt>
</msg>
===
I think that there is a problem with a too small tablespace. But I can´t fix that. Anybody? ;)

Can i install Cisco prime infrastructure 1.3 with 1.1 license.

Can i install Cisco prime infrastructure 1.3 with 1.1 license.To be more precise it will be fresh installation
but the licenses I have is of 1.1.As per my overview from Cisco prime Infrastructure 1.2 NCS and NCS(WAN)
has been bundled into one service.But both were seperate entities in Cisco Prime Infrastructure 1.1.

It doesn't matter if you want to make a new installation or an upgrade. The questions is the license.
The base license is necessary for network management nodes (devices). But to get updates for your system you need the additional to your Base License the Lifecycle License (which can be ordered for 12, 24 or 36 months).
The Lifycycle License is also based on the number of managed devices. In your case 50 devices. So you have that License - congratulations!
Otherwise order the Lifecycle License for 50 devices (L-N-PI12-50-M). This generates CON-PSUU-PI12LF50 for 12 months, list price 414,81$. Then Upgrade from 1.1 to 1.2, patch the system and upgrade to 1.3.
Have fun,
Chris

CISCO PRIME INFRASTRUCTURE NETFLOW TRAFFIC REPORT

Hi,
I have a report from cisco prime infrastructure, that I don´t know how to interpret, because the fields in the report I don´t know what´s mean them, the difference between them, what are optimal values, the worse values, etc.
Can someone help me with this
The name of the report is: FLEX NETFLOW TRAFFIC TQPQ
The fields that I don´t know what are:

hello,
I also have a problem concerning the interpretation of the report that I got. if anyone knows how Cisco gets its premium reports, it will help me!

Cisco Prime Infrastructure 2.1 Custom Reports

Hi, I need to generate a custom Guest User report from Cisco Prime Infrastructure 2.1. It needs to have a couple more fields added to the existing "Guest User Association" report.
Is it possible to connect to the Cisco Prime Infrastructure Database and Generate custom reports? Is there any documentation on this?
Thanks

Programmatic access to PI's data is via the REST API.
Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

Upgrade NCS 1.1.1.24 to Cisco Prime Infrastructure 1.2

Having a problem installing the ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz patch file on a virtual NCS before upgrading it to Cisco Prime Infrastructure 1.2.
I've followed the Cisco Prime Infrastructure 1.2 Quick Start Guide and did not had the same success as described in the document (see below):
gmsncs/admin# dir disk:defaultRepo/
Directory of disk:defaultRepo/
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 1544204288 bytes total used
                27185573888 bytes free
                30293413888 bytes available
gmsncs/admin# patch install disk:defaultRepo/ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Local file not found
Anybody experience with this procedure.
Thank You
--- Update ---
Skipped Step 4 and followed Step 5 in the Quick Start Quide, however now I receive a diffrent error:
gmsncs/admin# dir disk:/defaultRepo
Directory of disk:/defaultRepo
926193986 Sep 26 2012 17:48:12 GRDbackup-120926-1736.tar.gpg
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 2471309312 bytes total used
                26258468864 bytes free
                30293413888 bytes available
gmncs/admin# patch install GRDbackup-120926-1736.tar.gpg defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
gmsncs/admin#

Hi, Thank you again for your help, but I am still stuck. I have gathered the outputs from ncs start and a ncs status afterwards. Currently I am not able to access the web-UI of NCS..
deberncs01/admin# ncs startStarting Network Control System...This may take a few minutes...Dependency Check Failed: Matlab is not running.Dependency Check Failed: Ftp is not running.Dependency Check Failed: Tftp is not running.Failure during Network Control System startup. Check launchout.log for details.startdeberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin# ncs statHealth Monitor is running, with an error.failed to start NCS on startup Health MonitorReporting Server is StartingFtp Server is FailureDatabase server is stoppedTftp Server is runningMatlab Server is runningNMS Server is stopped.SAM Daemon is not running ...DA Daemon is not running ...Syslog Daemon is not running ...statusdeberncs01/admin#
Anyone got a clue on that? and where can I find that launchout.log on NCS? Thank you

After Update Cisco Prime Infrastructure from 1.3 to 2.0 imported floor plans has black background

Hello everybody,
we have updated cisco prime infrastructure from 1.3 to 2.0. When we now import a floor plan (autocad-file, dwg-format), the background from finally image, that is show in prime, is black. Previous imported floor planes has a white background. We also tried to import a previous imported floor plan again, the background is now black. Is there a possibilty to change the background to white? Thanks

Hi,
Look no further, these issues are related to know bugs. It seems that autocad files have multiple issues with PI 2.0, Only feasible way is to convert them to JPGs and import them. Lets hope these will get fixed to the level they where at PI 1.3.
CSCuj63017, PI 2.0 dwg(AutoCAD file) import reports Tailormade is for Demo use only
Symptom:
When dwg files are imported to Prime Infrastructure, they report
"For Demonstration Purposes only
Tailor made software"
Conditions:
Prime Infrastructure - 2.0.0.0.294
Use of dwg (Auto cad) files
Workaround:
None at this time
Further Problem Description:
CSCuj94500, Loading DWG floor maps on PI 2.0 appears in black background
Symptom:
On PI 2.0 when we try to import autoCAD .dwg file to map, the map appears in black background.
Conditions:
On PI 2.0 when we try to import autoCAD .dwg file to map
Workaround:
use 3rd party tool like Draftsight or AutoCAD Trueview to change the file to .jpg and import again to PI, after that the map appear in white background in PI 2.0.
Further Problem Description:
However, the same .dwg file when we imported it to PI 1.3 appear in map with white background.

Cisco Prime Infrastructure 2.0 not showing alerts from switch

Hello,
I have a prime infrastructure 2.0 running at a customer place and the customer now complains that he is not receiving link up/down messages from the switch. When i checked I have seen that if I shut down a port in the switch the prime identifies after a long time, but its not generating an alarm still. How can I fine tune the prime to fix this issue. Please help on this.
Thanks in advance

Hi,
Same problem here.
I am using Cisco Prime Infrastructure 2.0 (evaluation version for 60 days). I want to deploy port monitoring for my trunk ports between switches and some other important ports e.g. servers. Basically I want to get alarms when these ports are down, there are errors on ports and etc.
So in Design>Port Grouping I created User Defined group with important ports. In Deploy>Monitoring Deployment I selected Interface Health (default)>Deploy selected Port Groups and when selected port group I created.
Now the rule shows Deployed: Yes and Status: Active. After that I just pulled out one port which was in monitored group, waited 5min as it is set in Interface Health (default) template, and nothing happened, and worse, alarms started to show up of other ports where regular users are connected (computers was turned off), which I do not want to see at all. I tried redeploy template, I even created my own template but still no desired result.
Any suggestions how to make port monitoring work?

Installing Certificate from Microsoft CA (.pfx) in Cisco Prime Infrastructure 1.2

Hello,
we are trying to install certificates from our CA on our Cisco Prime Infrastructure 1.2
What we get from our colleagues is a file in .pfx format, containing an exportable key and the whole certificate chain.
On the prime server, using openssl 0.9.8, we exportet the key and converted the file to .pem.
When trying to install the certificate, we get the following error code:
prime# ncs key importkey key-nopw.pem newcert.pem repository certificate
INFO: no staging url defined, using local space. rval:2
ERROR: dowload of key-nopw.pem failed. rval:-200
Does anyone have an idea what formats can be used for prime ssl certificates and how to install them?
The official guide has only little information on how to make a csr and install the certificate.
Best regards,
Joerg

I solved the same problem 5min ago.!
select the device and press syc ..that helped me ...

Upgrade from Cisco Prime infrastructure verion 2.0 to 2.1

Similar Messages

Maybe you are looking for