Upgrade from CRforVS2010 Beta to CRforVS2010 production results in errors

Hello all,
I'm looking for some help with an upgrade issue. I am a newbie in this area so I apologize for my lack of knowledge.
I'm taking over a web site with crystal reports for visual studio 2010. The site is quite complicated. The main site is located on one server(external web hosting) and the reporting feature is located on another (internal office hosting).
When I upgrade to CRforVS2010 production release, the reporting feature bombed. Giving me the following error:
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.Web, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 56:
Line 57:       <httpHandlers>
Line 58:         <add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Line 59:       </httpHandlers>
Line 60:
Source File: C:\inetpub\arcswppi\reporting\web.config    Line: 58
Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
My web.config is below
Can anyone help me with this?

I wrote a KB on this:
[1535325 - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do]
- Ludek

Similar Messages

Looking to upgrade from Adobe Creative Suite 3 Production Premium to the latest.

I am looking to upgrade from Adobe Creative Suite 3 Production Premium to the latest. We are running on an isolated network without access to the Internet. Looking for advise on how best to proceed.

As far as upgrading goes, you will not have that option for CS3 as it is not in the upgrade path for CS6. You will have to purchase the full version of CS6. I don't know if buying the disk is still an option, but if you have to you can download the installation file(s) and copy to a removeable media and install using that. In order to activate it you will have to perform an offline activation.
Here are some links that might be of help...
Creative Suite 6
Offline Activation

Can I upgrade from Web Premium 3 to Production Premium 4 and keep Dreamweaver?

I have a question I hope someone can answer. I am thinking of upgrading from my Web Design Premium Cs3 to the Production Suite. I use Dreamweaver a lot but not for major website coding and such and I am quite comfy with CS3. So I would like to keep DW CS3 but I am using after effects more and more with animation projects and would like to upgrade from Web CS3 to Production CS4 to gain AE CS4.
My main question is this: will I loose Dreamweaver CS3 and Acrobat if I do the Production update? I currently run a stand alone version of AE Ver. 7 Pro and acquired a new Macbook Pro that would run AE and Premier, Photoshop etc. I just don't want to loose Dreamweaver in the upgrade.
Also, if I wanted to upgrade Acrobat in the future how would that work? Is Adobe forcing the upgrade to the Master Suite in my situation? Or can I upgrade individual components in the future?
A simple yes or no answer is fine.
Thanks!

The simple yes or no answer you are looking for is no, you cannot upgrade individual components in the future. Once you buy into the suite, you can upgrade the full suite or upgrade from one version of the suite to a higher version of the suite.
For futher information, I suggest you directly contact Adobe Customer Support. This forum is not a venue for direct communication with Adobe, but rather, a user to user forum with emphasis on users. Adobe does not officially monitor this forum.
- Dov

Upgraded from Lightroom Beta which was on a hard drive which has failed now want to install my upgrade unto new hard drive.

When lightroom first arrived on the scene, it was in the beta stage and had unlimited free access. I liked it and when Lightroom 2 came out I upgraded from Adobe. That was on my old computer whose hard drive has failed. So now wish to install my Lightroom 2 on my new computer. It asks for the Original serial # which I do not have access to. Since my original version was a beta how can I get a serial # for a version 1.0 ?

When lightroom first arrived on the scene, it was in the beta stage and had unlimited free access. I liked it and when Lightroom 2 came out I upgraded from Adobe. That was on my old computer whose hard drive has failed. So now wish to install my Lightroom 2 on my new computer. It asks for the Original serial # which I do not have access to. Since my original version was a beta how can I get a serial # for a version 1.0 ?

Upgrade from Forms 4.5 to 6i - FRM 41032 error

I am getting the following error when I upgrade from Forms 4.5 to Forms 6i -
"FRM-41032 Cannot set ENABLED attribute of current item. "
Does anyone have any suggestions?
Thanks.

I think you are setting that attribute in trigger which currently firing for that item.
for eg,
you have one item "empno".Suppose you want to set attribute for that item.you can't set that in
when-new-item-instance,key-next-item,post-text-item or ... triggers which currently firing for that item. you can use some other item's trigger.
thanks,
viji.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Pramila Rama:
I am getting the following error when I upgrade from Forms 4.5 to Forms 6i -
"FRM-41032 Cannot set ENABLED attribute of current item. "
Does anyone have any suggestions?
Thanks.<HR></BLOCKQUOTE>
null

I tried to upgrade from FF7 beta to FF7 and now I have no Firefox at all

I was using the FF7 beta. When I saw that FF7 had been released, I downloaded and tried to install it, without uninstalling the beta first. That may have been a mistake. It got partway through the install process and then asked me to reboot the computer. After the reboot, my FF shortcut no longer worked ("Searching for firefox.exe"). I used another browser to download the installer again and ran it, only to be told that I needed to reboot my computer in order for a previous install to complete. I rebooted; no change. Attempting to remove the existing installation in Add/Remove Programs has not helped, though Mozilla Firefox is no longer listed there.
I'm using Windows XP and my standard user account doesn't have admin privileges. This hasn't been a problem for Firefox until, perhaps, now. I've tried running the installer from an admin account as well, with the same result.
Is there anything I can remove manually to fix this?

OK... I found a Mozilla Support article - https://support.mozilla.com/en-US/kb/The%20program%20must%20close%20to%20allow%20a%20previous%20installation%20attempt%20to%20complete - which says deleting xpicleanup.dat will solve the problem; but I guess that's out of date (or the presence of that file isn't the only cause of the bug), because there's no xpicleanup.* on my machine. However, elsewhere in this forum - https://support.mozilla.com/en-US/questions/786890 - I found a suggestion to install the new version somewhere other than the default folder. I did that, and it worked; and it even preserved my bookmarks, add-ons and previously-opened tabs. (If anyone finds this while trying to solve their own upgrade/install failure: choose Custom rather than Standard install, and just change the suggested folder name.)
The only remaining sign of the problem is the icon in my Quick Launch area: if I try to use it to launch Firefox, I still get the error "Windows cannot open this file: firefox.exe.moz.delete". Having recorded that here for posterity, I'll be replacing the icon.

I need help with upgrade from CS5.5 to CS6 Production Premium DISC version

Hi,
i bought the Production Premium CS5.5 in 2011. I then bought the CS6 Upgrade (the boxed version). After the security desaster at Adobe, the keys were invalidated. So when now years after purchase I wanted to use my product, Adobe said I had to download the file CS6 (6GB) from the Adobe server. I did that. After unzipping, the Installer says that a file is missing and I should use a tool which is now not on the Adobe site since it has been discontinued.
It would be nice if anybody had an idea how to get this to work.
Thank you in advance.
A former premiere fanboy that is now really annoyed.

Hi, thank you for the fast reply. I tried to put the downloaded file (7zip, CS6) und the small file (setup file 1MB) in a new folder with write priviledges. 150GB free space. It starts to unpack 3% then cancels due to insufficient space or a write priviledges error (none is true). I will try your link. Yes, I have both boxes here with the serial keys. CS 5.5 is installed on the PC so it should find it. The tool I mentioned is: Adobe - Adobe Support Advisor

Upgrade from Yosemite Beta to full public release

I'm struggling with updating my Macbook Air, I installed the public beta of OS X 10.10 (Yosemite) I now want to wipe clean my drive and install the full public release.
Every-time I install direct from the App Store, Beta version 4, I've tried booting into recovery mode, Disk Utility and wipe the SSD, re-download guess what Beta 4.
I've get and understand this is driven by the fact my recovery partition is Yosemite Beta, what I'm looking for is how can I overwrite this with the full general public release version.
Passing note, I know there is not much difference only really finial build number etc. but its frustrating when I perform a clean install, open the app store to be treated with the same beta upgrades...
any help would be appriciated, I have 2 other iMacs which can be used to create a bootable OS X USB or a networked install route should this be required.

Download the Yosemite release from the App Store and save it. You will need to erase your hard drive and install anything from Snow Leopard to Mavericks before you will be able to download Yosemite. There is no way to upgrade the beta.

Upgrade from Design Premium CS4 to Production Premium CS5

Will InDesign, Fireworks, and Dreamweaver still function from Design CS4 to Production CS5? I have heard conflicting advise that the upgrade will void those applications?? Thanks.

The upgrade will not touch the earlier version. Whoever told you otherwise was incorrect.
Bob

Upgrading from CS5.5 to CS6 Production Premium

Hello,
I am a current student at a University and wish to upgrade my CS5.5 Production Premium to CS6 Production Premium at a student price. Is this even possible? How much is it and where do I go to get it?
Thank you

For details about pricing and upgrades, see http://adobe.ly/hOlNKR or contact Customer Service: http://www.adobe.com/support/contact

Upgraded from LR3 Beta to LR3: Where are all of my Presets from Beta?

I just installed the full version of LR3. What the heck happened to all of my presets from the LR3 Beta? It only found the ones from LR2.

Nope, but I did find them.
Apparently the default location is within the Pictures folder on my main drive. The Beta had them stored under (User)–>Application Support–>Adobe–>Lightroom.

LR5 upgrade from LR5 Beta

I'm brand new to lightroom and just downloaded LR5 Beta. i am truly impressed with the product (I've some limited experience with elements 7 for my digital photography - bit I can't believe I haven't used LR before).
So before i import all my photos into LR beta, making my changes etc, am I safe in assuming that when I purchase the product that my work done in LR5 beta will be retained and accesible in LR5?
Thanks!
-matt

If past performance is any indicator, then all of your work should carry over. However, the release notes for the beta version indicated that you should not use it for production work because the images might not look just the same when the final product is officially released. I am using the beta version, and will be using some of the images I have worked on in an upcoming photo book. But I'm doing so knowing that I might have to make some adjustments later on.

Upgrade from 6.40 - 7.10, Analyzer giving compile errors

We are testing out an upgrade to SAP GUI 7.10 (SP 9, V7100.2.9.1039), BEx (SP7 P1 R1352).
When running queries in the Analyzer, we get the following error "Compile Error: Can't find project or library" and the VB editor pops up to the following VB code:
Public Function BEx() As BExApplication
Set BEx = Application.Run("BExAnalyzer.xla!GetBEx")
End Function
I can shut down the debugger and the results are available but the VB windows continually pops up when any modifications are made to the report.
The following shows up in the trace although I'm not sure if it is related:
* Trace Started as: 10/10/2008 10:11:17 AM*
ListSeparator: ,
ExcelVersion: 11.0
AddinVersion: 7100.3.701.1352
BExCheckFrontend.CheckFrontend: No Check performed (20081003) 0
Errors while executing the 7.0 exit : SAPBEXonRefresh
-2146788248
Exception from HRESULT: 0x800A9C68
   at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack, Boolean IgnoreReturn)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack, Boolean IgnoreReturn)
   at com.sap.bi.et.analyzer.addin.BExItemGrid.CallExitSAPBEXonrefresh()
-------------------10/10/2008 10:20:39 AM-------------------
System.Runtime.InteropServices.COMException (0x800A9C68): Exception from HRESULT: 0x800A9C68
   at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack, Boolean IgnoreReturn)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack, Boolean IgnoreReturn)
   at com.sap.bi.et.analyzer.addin.BExConnect.FindLF(Object& iRange, Object& eRange)
Exception from HRESULT: 0x800A9C68
   at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack, Boolean IgnoreReturn)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack, Boolean IgnoreReturn)
   at com.sap.bi.et.analyzer.addin.BExConnect.FindLF(Object& iRange, Object& eRange)
Any debug ideas or suggestions would be appreciated.
Thanks

Hi Adam,
Can you please check that the following settings are correct in Excel.
      1. Make the following setting in Excel:
          o Tools
          o Macros
          o Security
          o Trusted Sources
          o [x] Trust Access to Visual Basic Visual Basic Projects (CheckBox))
Also ensure that the default macro security setting is set to "Low".
Let me know how you go.
Cheers
Shaun

I need to silently upgrade from 3.5 to 7 but get an error message after 7 install. Platform version 7.0 is not compatible with minVersion = 1.9.1

I'm trying to silently upgrade my environment to FF 7. I've gotten the silent install working great, it puts in my Proxy Server info, reassigns the home page and all that. But, the last version we pushed out was FF 3.5. If a user had that on their PC and they run the FF7 install, they get weird messages when clicking on the icon.
XULRunner: Error: Platform version '7.0' is not compatible with minVersion >= 1.9.1 maxVersion <=1.9.1
Another message they get is:
AutoConfigAlert:
Netscape.cfg/AutoConfig failed. Error: pref failed: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.setBoolPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: pref :: line 70" data: no]
This is on Windows XP

Do you have other virtualization or security software that might protect .ini and possibly other files in the Firefox program folder (C:\Program Files\Mozilla Firefox\) and prevent Firefox from updating them properly?
You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Unable to export Quicktime after upgrade from Premiere 7.0 to 8.0 (2014) error "incompatible video codec in preset"

In the previous version of Premiere Pro (downloaded two months ago) I was able to export QuickTime files with preset HD 720p H.264. It was very easy to do this in the previous version.
Upgraded to Premiere Pro 8.0 (2014), no when I attempt to export the same project with the same settings I see error message "incompatible video codec found in the preset. present load failed"
When I select Quicktime, the default preset appears as NTSC DV Widescreen 24p. Attempted to export with this setting, result is a file that plays audio but no video.
System is Windows, tried two different computers, including one with Windows 8, same result. Tried Media Encoder, same result.
I searched the forums for an answer, the new features page lists these presets as available however they are not working for me. Nothing else was changed on the computer, only the upgrade to Premiere 8.0 (2014)
How can I export Quicktime files in the new Premiere Pro?

Tech support helped me solve the issue - uninstall QuickTime and reinstall the newer version of QuickTime

Upgrade from CRforVS2010 Beta to CRforVS2010 production results in errors

Similar Messages

Maybe you are looking for